1 x | Digital scale up to 40 kg |
1 x | Dremel PERMAGRIT thin lime |
1 x | Copier 5x20 cm pcs |
1 x | Fabric scissors curved (offset handles), 16 cm / 6" length |
1 x | 22 mm Cut Disc Proxxon/Dremmel |
1 x | 100g Flux Paste for Silver Solder |
1 x | EC-Cutter |
1 x | Fresa corte diamante Ø 2.35mm (lentil) |
1 x | Crimping tool |
1 x | 2,0x50 mm allen screwdriver |
1 x | Extra Hard Titanium Herxagon Screwdrivers |
1 x | Dremel PERMAGRIT 18 mm round lime |
1 x | Cut tube |
1 x | Fresa corte diamante Ø 1.0mm (bola) |
1 x | Fabric scissors curved Premium, 16 cm / 6" length |
1 x | |
1 x | |
1 x | Digital weight, angle and balance meter BASIC |
1 x | Concave-Convex sandpaper file 13 mm |
1 x | 1,5x50 mm allen screwdriver |
1 x | Dean-T Plug Mold |
2 x | Z type of cable coupler Ø 2 (2 uds) |
1 x | BALSA trip 10x10x1000 mm |
2 x | Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs) |
3 x | Aluminium coupler M2/2 with ball bearing (1 pcs) |
1 x | BALSA trip 4.0x4.0x1000 mm |
1 x | OBECHI sheet 2.0x3.0x1000 mm |
1 x | BALSA trip 3.0x3.0x1000 mm |
2 x | Aluminium coupler M3/2 with ball bearing (1 pcs) |
1 x | Beech dowels 3.0 x 1000 mm |
3 x | Aluminium coupler M2,5/2 with ball bearing (1 pcs) |
1 x | Trailing edge BALSA 35x8x1000 mm |
3 x | Threaded coupler M3 (10 uds) |
2 x | Threaded coupler M2,5 Ø 3 mm (10 pcs) |
1 x | BALSA leading edge 8x10x1000 mm |
1 x | BALSA trip 2.0x10.0x1000 mm |
3 x | Threaded coupler ALU M3 Ø 5 (2 uds) |
3 x | Brass ball links BS M3 V1 (10 pcs) |
3 x | Z type of cable coupler Ø 1 (2 uds) |
2 x | Kwik link AL M3 con Clip (2 pcs) |
1 x | Pine wood slat 3.0x5.0x1000 mm |
1 x | Pine wood slat 5.0x5.0x1000 mm |
1 x | Ball Link M2 with Ball and Hardware, 10 pcs |
2 x | Couple M4 for wire (10 pcs) |
1 x | Pine wood slat 3.0x10.0x1000 mm |
1 x | Mahogany wood slat 1.5x1.5x1000 mm |
1 x | BALSA triangular 10x10x1000 mm |
2 x | Threaded coupler ALU M2 Ø 4 (2 uds) |
2 x | Threaded coupler ALU M3 Ø 4 (2 uds) |
1 x | BALSA trip 6.0x6.0x1000 mm |
1 x | Pine wood slat 6.0x6.0x1000 mm |
1 x | BALSA trip 3.0x5.0x1000 mm |
1 x | BALSA trip 5.0x5.0x1000 mm |
1 x | Pine wood slat 3.0x7.0x1000 mm |
1 x | Ball link duraluminium M3 V1 (10 pcs) |
3 x | Clevis plastico I=44 mm / hole 3mm / pin 2 (2 pcs) |
4 x | Threaded coupler Micro M2 Ø 0,8 mm (10 pcs) |
3 x | Threaded coupler ALU M2,5 Ø 3 (2 uds) |
4 x | Z type of cable coupler Ø 1.8 (2 uds) |
1 x | Liston HAYA 8 x 8 x 1000 mm |
5 x | Threaded coupler Micro M2 Ø 0,8 (10 pcs) |
1 x | Walnut wood slat 3.0x3.0x1000 mm |
1 x | Pine wood slat 2.0x2.0x1000 mm |
4 x | Clevis plastico I=30 mm / hole 2.5mm / pin 1 (2 pcs) |
2 x | Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm |
1 x | Beech dowels 2.0 x 1000 mm |
1 x | Ball link Aluminio M3 (2 pcs) |
5 x | Threaded coupler ALU M2,5 Ø 6 (2 uds) |
1 x | Ball Link ALU M3 - RH (1 pcs) |
2 x | Aluminium red ball links M3 V1 (10 pcs) |
1 x | Liston HAYA 3 x 10 x 1000 mm |
1 x | Aluminium blue ball links M3 V1 (10 pcs) |
2 x | Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds) |
1 x | Mahogany wood slat 2.0x2.0x1000 mm |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m |
2 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m |
1 x | Carbon Non-Woven, 160 g/m² 100 cm 5m |
1 x | Carbon fibre tape 200 g/m² (unidirectional) 50 mm |
1 x | Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m |
1 x | Extractor piñones 2.3/3.2 mm |
1 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm X 100m |
1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m |
1 x | Carbon fibre sleeve 12k 170 mm x 5m |
1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m |
1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m |
1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs) |
2 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll |
1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m |
1 x | ARAMID honeycomb 1300x2600x2 mm |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m |
2 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs) |
1 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M |
1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m |
1 x | Glass fabric tape 225 g/m² (Silane, plain) 30 mm X 100m |
1 x | Carbon Non-Woven, 160 g/m² 100 cm 10 m |
1 x | Carbon Non-Woven, 160 g/m² 127 cm 1 m |
3 x | Conector MR-60 (pareja) |
1 x | Electric Landing Gear "Black Edition" ULTIMATUM 3.0 (Elektron Re |
1 x | Stainless steel cable Ø 0.52 mm - 15 kp (10 m) |
1 x | Steering arm 16 mm Ø 4 mm |
1 x | Crimping sleeves for cable 0.70 mm (10 pcs) |
1 x | Steering arm 16 mm Ø 4 mm (2 uds) |
1 x | Stainless steel cable Ø 0.5 mm (20 m) |
1 x | Electric spoiler 250 mm (2 pcs) |
2 x | Cierre cabina aluminio Ø5, I=16 mm |
1 x | Parachutist |
1 x | White smoke bombs AX-60 (5 pcs) |
1 x | Wing connector 8pin with pin strip, plug & socket |
1 x | Connectors banna gold 5,5 mm (M/F) |
1 x | Conector Servo female 4 pines |
1 x | Connectors banna oro 6,0 mm (M/F) |
1 x | Smoke set "M" |
1 x | White smoke canister 65 g |
1 x | Blue smoke canister 100 g |
1 x | Connectors banna oro 2 mm (M/F) |
1 x | Connectors banna oro 8,0 mm 5 pcs(Female) |
2 x | XH male balance (4S) connector (2 pcs) |
1 x | Connectors banna oro 2 mm (M/F) (ultralight) |
1 x | Remote electric ignition system |
1 x | AX-60 starters (5 pcs) |
1 x | White smoke bombs AX-18 (5 pcs) |
1 x | Green smoke canister 65 g |
1 x | 3l Smoke oil |
3 x | Black smoke bombs AX-60 (5 pcs) |
1 x | Gold antispark 4 mm plug |
2 x | EC5-Set female, simple quality, 2 x female pin, 1 x blue housing |
1 x | Optotronix Aurora Plug |
1 x | Connectors banna oro 8,0 mm (Male) 5 pcs. |
2 x | Mixers smoke bombs AX-60 (5 pcs) |
1 x | Connectors banna oro 3 mm (M/F) |
1 x | Red smoke canister 140 g |
1 x | Connectors banna oro 4 mm (M/F) |
2 x | "M" set |
1 x | XH male balance (5S) connector (2 pcs) |
1 x | Green smoke canister 140 g |
1 x | Yellow smoke canister 100 g |
3 x | Red smoke canister 65 g |
1 x | Connectors banana oro 6,0 mm Ultralight (M/F) |
2 x | Smoke set "Glider" |
1 x | Gold antispark 5,5 mm plug |
2 x | Smoke set "S" |
2 x | XH male balance (3S) connector (2 pcs) |
1 x | Connector CAN 15 |
1 x | 200 mm extensión servo HITEC/JR |
1 x | PROXXON - SANDING BELTS FOR BSL 220/E 180 GRIT (5 pcs) |
1 x | LH long black aluminium horn L31xH30 (2pcs) |
1 x | Fresa corte diamante Ø 2.35mm (flame) |
1 x | Streamline Stainless Steel Tubing 6.3x3.5x1000 mm |
1 x | Carbon fiber rod 6.0 mmx1000 mm |
1 x | Fresa corte diamante Ø 1.4mm (bola) |
1 x | PVC 0,08 qmm Futaba servos wire (5 m) |
1 x | RUDDOG Protection and Heat Shield Tape (2mx50mm) |
1 x | Ø 2,5 mm pin for Kwik link MPJ2170/2173 (6 pcs) |
1 x | 3,0x60 mm allen screwdriver |
3 x | Kwik link with arm M5xM2,5xL30 |
3 x | Pulley brass 12/2 (2 pcs) |
4 x | Crimping sleeves for 1.1 mm cable (10 pcs) |
1 x | Aro pasacable Ø20 mm (4 pcs) |
1 x | Kwik link AL M4 L:40 mm (2 pcs) + Pin Ø 2,5 mm |
3 x | Cable coupler M2,5 (2 pcs) |
2 x | Pasacables rectangular 40x15 mm (4 pcs) |
3 x | Support Antena 2.4 Ghz (2 pcs) |
1 x | Support conector MPX (6 pcs) |
2 x | Soporte grifo FESTO vertical (1 pcs) |
2 x | Carbon roving DowAksa / 24k / 1600 tex |
2 x | PVC grid diagonal 290x185x0.32 mm |
1 x | Carbon Non-Woven, 160 g/m² 127 cm 5m |
1 x | Carbon Non-Woven, 160 g/m² 100 cm 25 m |
1 x | PVC plate 320 x 194 x 0.23 mm (brown) |
1 x | Fiberglass plate 350x150x1.5 mm |
1 x | Fibra carbono tela 160g/m2 100 cm x 2 m (twill weave) |
1 x | Fiberglass plate 350x150x0.3 mm |
2 x | Chopped glass fibre strands 3 mm |
1 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 100M |
2 x | Glass fabric 80 g/m² (silane, twill) 100 cm x 10m |
1 x | Peel ply 95 g/m² (plain weave) 100 mm x 100 m |
1 x | Beech dowels 4.0 x 1000 mm |
1 x | Connectors banna oro 3,5 mm (M/F) |
1 x | Red smoke bombs AX-60 (5 pcs) |
1 x | Fiberglass 280 g/m² 5000x1000 mm |
1 x | Carbon plate 1000x500x2,0 mm ECOTECH |
1 x | Carbon plate 350x150x3.0 mm |
1 x | Glass fibre sleeve Ø 20 mm X 10m |
1 x | LOWER TOW HOOK |
1 x | ESC MEZON 115 Opto |
1 x | Motor SAITO FG-61 TS |
1 x | Epoxy adhesivo Elan-tech ADH 981.892 50ml (dark grey) |
2 x | Threaded coupler M2,5 Ø 2 mm (10 pcs) |
1 x | BALSA trip 8.0x8.0x1000 mm |
1 x | Walnut wood slat 1.5x1.5x1000 mm |
1 x | Linden wood slat 2.0x2.0x1000 mm |
3 x | Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs) |
1 x | SERVO HOLDER |
1 x | Receptor CORE PBR-26XS 26ch |
1 x | Locking cable tie 4.6x203 (uds) |
1 x | Allen wheel collar M3x3 |
1 x | Cable S.BUS 3 salidas 300 mm |
1 x | Futaba Female 40 cm extension |
1 x | Extension 30 cm (Futaba) |
1 x | Circlick securite |
1 x | Premium servo extension 75cm |
1 x | silicon 100 cm Futaba Extension Ø 0,35 mm |
1 x | Premium servo extension 50cm |
1 x | Extension silicon 30 cm male (Graupner) |
1 x | Servo HITEC HS-311 |
1 x | Servo HITEC D951 TW |
1 x | Steering arm 12 mm Ø 4 mm |
1 x | Servo HS-5565MH High Voltage |
1 x | 38x4,5 mm wires output (2 pcs) |
1 x | Clip mini fixing for wing (2 pcs) |
1 x | Servo HITEC D145 SW |
1 x | Servo HITEC HS-485 HB |
1 x | Canopy Lock V1 M3 Red (2 pcs) |
1 x | HPP-21 PLUS PC and Field Programmer for Hitec Digital Servos |
1 x | Servo HITEC HS-55 |
1 x | Stainless steel cable Ø 0.5 mm (10 m) |
1 x | Allen wheel collar M4x4 |
2 x | Glases Nimbus |
1 x | Glases Flitemaster |
1 x | Extension silicon 35 cm male (Futaba) |
1 x | Extension silicon 10 cm (Futaba) |
1 x | Extension silicon 30 cm female (Graupner) |
1 x | Cabel "Y" 30 cm (graupner) |
1 x | Cabel "Y" 30 cm (Futaba) |
1 x | Premium servo extension 100cm |
1 x | Extension lead 15 cm Multiplex |
1 x | 0,14 mm PVC servo wire extension, ZH micro conector. |
1 x | Premium servo extension 25cm |
1 x | Extension silicon 10 cm (Graupner) |
1 x | Cabel "Y" 15 cm |
2 x | Motor Mega AC 16/07/03 |
2 x | Aluminun wheel collar 2.5 mm Ø (4 uds) |
1 x | One touch canopy lock |
1 x | Servo Robbe FS 128 BB MG HV Digital |
1 x | Cable grommet Ø 3.2 mm (4 uds) |
2 x | Canopy Latch |
1 x | HPP-25 PLUS PC Programmer for Hitec Digital Servos Field Program |
1 x | Servo HITEC HS-5585MH |
1 x | Servo HITEC HS-45 HB |
2 x | Aluminun wheel collar 5 mm Ø (4 uds) |
1 x | 28x5 mm wires output (2 pcs) |
1 x | 7 Servo SET 9g DS MG + Full servo extension cable set for Avanti |
1 x | Cap closure 33/23.5mm (2 uds) |
1 x | Alu servo arm double RHINO |
1 x | Screw-lock connector M2 (2 uds) |
1 x | ALU servo arm 90º 3 mm shaft |
1 x | Servo HITEC HS-5475 HB Digi |
1 x | Cable grommet Ø 5 mm (4 uds) |
1 x | 140 mm rods set for direction control |
1 x | Cockpit plastic closing |
1 x | Servo HITEC D941 TW |
1 x | Conector BEC female (10 pcs) |
1 x | White smoke bombs AX-3 (10 pcs) |
4 x | Conector JR Servo female (10 pcs) |
2 x | Conector JR Servo male (50 pcs) |
1 x | Connectors DEANS 4 pins (1 pair) |
2 x | Connectors banna oro 4 mm (M/F) (ultralight) |
2 x | Conector BEC male (10 pcs) |
2 x | 30 cm MULTIPLEX female connector |
1 x | White smoke bombs AX-9 (10 pcs) |
2 x | XH female balance (7S) connector (2 pcs) |
2 x | XH female balance (6S) connector (2 pcs) |
1 x | Conector FUTABA Servo male BLUE silicon (10 pcs) |
1 x | Parachute expulsion foam |
2 x | Conector XT-30 (hembra) |
1 x | Banna gold connector 2,5 mm (100 M/F pairs) |
2 x | Pulley brass 10/2 (2 pcs) |
2 x | Sun Cover PC 21 XXL (JMB Jets) |
3 x | Sun Cover ULTIMATUM 2.0 (Hispano Aviacion) |
2 x | Sun Cover BULL Mo1 2.6 (Hispano Aviacion) |
2 x | Rubber bushing with bracket "A" type (2 pcs) |
1 x | Ø 0,5 mm Pull-Pull Kevlar Line (3 m) |
1 x | Vacuum bag, 1200 mm x 50 m |
1 x | Pulley brass 8/2 (2 pcs) |
2 x | Pulley brass 4/1,5 (2 pcs) |
2 x | Pulley brass 2,5/1 (2 pcs) |
1 x | Porta Kwik link M4 3 mm (2 pcs) |
1 x | Porta Kwik link M3 3 mm (2 pcs) |
2 x | Pulley brass 14/2 (2 pcs) |
1 x | Kwik link AL Ø2 mm L:23 mm (2 pcs) + Pin Ø 1,6 mm |
4 x | Threaded coupler ALU M3 Ø 6 (2 uds) |
2 x | Ø 1,6 mm pin for Kwik link MPJ2150/2157 (6 pcs) |
1 x | M4xM2,5xL30 nylon clevis and arm (10 uds) |
1 x | Threaded coupler M2 (10 pcs) |
2 x | BRASS CONTROL HORN M3x16 mm 2pcs |
3 x | Porta Kwik link M4 4 mm (2 pcs) |
2 x | Ø 1,6 mm pin for Kwik link MPJ2160/2161 (6 pcs) |
2 x | Cable coupler M2 (10 uds) |
1 x | Turnbuckle M2x29/43 (2pcs) |
1 x | Kwik link aluminio IZD. M3 L: 30mm (2 uds) pin Ø 2 mm |
2 x | Round Rod 1.0x3.5 cm |
1 x | Small kwik link (10 pcs) |
1 x | Turnbuckle M2,5x32/48 (2pcs) |
1 x | Pin 3,0 to cable coupler M3,0 ⌀ (6 pcs) |
1 x | Micro clevis (10 uds) |
1 x | Micro clevis 0.8 mm(10 uds) |
1 x | Ø 2 mm pin for Kwik link MPJ2162/2163 (6 pcs) |
1 x | Cable coupler M3 (10 uds) |
1 x | Suncover 100cc Red |
1 x | Cable coupler M2x66 (2 uds) |
2 x | Threaded coupler M2 (10 uds) |
1 x | Fully Threaded Steel Rod M2,5 (2 uds) |
2 x | Black large kwik link (10 pcs) |
2 x | Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm |
2 x | Metal ball clevis M3 (10 uds) |
1 x | Rubber bushing with bracket "B" type (2 pcs) |
1 x | Threaded coupler M2,5 (10 pcs) |
3 x | Threaded coupler ALU M2,5 Ø 4 (2 uds) |
1 x | Kwik link with arm M3xM2xL24 |
1 x | Micro clevis (10 uds) |
1 x | Pulley brass 6/1,5 (2 pcs) |
1 x | Pulley brass 5/1,5 (2 pcs) |
1 x | Pulley brass 2,5/1 (2 pcs) |
1 x | Support pump Xicoy X45 |
1 x | Liston HAYA 10 x 10 x 1000 mm |
1 x | Tube support Ø 6mm (10 pcs) |
1 x | Angle support XT60 conector |
1 x | Support Pitot JETI |
1 x | Carbon Fiber TeXtreme® 80 g/m² (plain) 100 cm, roll/ 10 m |
1 x | Glass fabric 25 g (2 m²) |
1 x | Carbon fabric 245 g/m² (twill weave) 127 cm, roll/ 10 m |
1 x | PT 20x13 EL Propeller |
1 x | PT 22x10 EL Propeller |
1 x | PVC grid straight 290x185x0.32 mm |
1 x | Carbon plate 700x550x0.5 mm |
1 x | Fiberglass 163 g/m² 1m x 5 m (Twill) |
1 x | Carbon plate 550x350x3.0 mm ECOTECH |
1 x | Chopped glass fibre strands 0.2 mm |
1 x | Glass fabric 160 g/m² (Twill weave) 100 cm x 10m |
1 x | Glass fabric 49 g/m² (Finish FE 800, plain) 110 cm x 1m |
1 x | Fibra de vidrio 100 g/m² (50 m x 100 cm) |
1 x | Glass fabric 80 g/m² (silane, twill) 100 cm x 50m |
1 x | Carbon fabric 68 g/m² (style 493 aero, plain weave) 100 cm |
1 x | Fibra de vidrio 80 g/m² (10 m x 100 cm) |
1 x | 9x4.7 * 22x12 carbon propeller |
1 x | Fiberglass plate 1200x1000x0,2 mm |
1 x | Propeller POWER-PROP 11x6 |
1 x | Glass fabric 80 g/m² (FK 144, twill weave) 100 cm, pack/ 1 m |
1 x | Propeller POWER-PROP 14x8 |
1 x | Propeller electric carbon 10x6 |
1 x | PT 21x13 EL Propeller |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 5 m |
1 x | Glass fibre sleeve Ø 20 mm |
1 x | Propeller electric carbon 9.5x7 |
1 x | Fiberglass plate 620x540x0,2 mm |
1 x | Glass fabric 280 g/m² (twill weave) 100 cm, roll 50 m |
1 x | Fiberglass plate 350x150x2.0 mm |
1 x | Carbon plate 550x350x4.0 mm ECOTECH |
1 x | Porpeller HUNTER 480 |
1 x | Propeller electric carbon 7x7 |
1 x | Propeller POWER-PROP 15x10 |
1 x | Propeller electric carbon 10.5x8 |
1 x | Propeller POWER-PROP 14x12 |
1 x | Glass fabric 425 g/m² aero,10x1m |
1 x | Styrene plate 320x120x0.5 mm |
1 x | Fiberglass 5000x1100 mm 49 g/m² |
1 x | Glases Stratus |
1 x | Cianocrilato MD GEL 454 tube 20g |
1 x | KAVAN CA Activator 150ml |
1 x | Glases Aspen |
2 x | Motor Mega AC 16/10/03 RACE |
2 x | Motor Mega AC 16/15/04 |
1 x | Motor Mega AC 16/15/08 |
1 x | Motor Mega AC 16/25/04 |
1 x | Motor Mega AC 22/30/03 |
1 x | Allen wheel collar M3x5 |
1 x | Servo HITEC HS-65 MG |
1 x | Carbon Non-Woven, 240 g/m² 100 cm x 20 m |
1 x | Carbon plate 550x350x1.5 mm ECOTECH |
1 x | Sandwich carbon + poplar 4mm + carbon 290x160 mm |
1 x | Screw-lock connector Ø 2 mm (2 uds) |
1 x | Pushrod octagone 4/3 |
1 x | Landing gear frontal support 29x26x13,5 |
1 x | ALU servo arm 3 mm shaft |
1 x | Pushrod greyline 3/2 with coupler M2 |
1 x | Locking cable tie 3.2x142 (uds) |
1 x | CA Glue (medium) 20g |
1 x | CA Glue fast 20g |
1 x | Cyanoacrylate MD GLUE plus 405, for extreme loads 20g |
1 x | Activator spray for Cyanoacrylates 200 ml |
1 x | Debonder CA 20g |
1 x | Cyano SUPER - GOLD™ THIN (12g) |
1 x | Fiberglass plate 350x150x0.5 mm |
1 x | Thread locker IC-Loc™ blue "medium" 10 ml |
1 x | Motor Mega AC 16/15/03 |
1 x | Motor Mega AC 16/15/07 COMBAT |
1 x | Motor Mega AC 22/30/02 |
1 x | Motor Mega AC 16/07/08 |
1 x | Motor Mega AC 16/25/06 |
1 x | Motor Mega AC 16/15/05 CE F5J |
1 x | Motor Mega AC 16/25/04 COMBAT |
1 x | Motor Mega AC 16/15/07 |
1 x | Motor Mega AC 22/20/03 |
1 x | Motor Mega AC CAR 10 PRO |
1 x | Motor Mega AC 16/15/02 |
1 x | Motor Mega AC 16/07/04 |
1 x | Pushrod octagone 3/2 with coupler M2 |
1 x | Servo HITEC HS-5805 MG Digi |
1 x | Servo HS-7980TH digi high voltage ultra torque |
2 x | MPX screwable clips (4 pcs) |
2 x | XH male balance (8S) connector (2 pcs) |
2 x | Connectors MPX male |
2 x | Wing connector 8pin with pin strip, plug & socket |
2 x | Conector JR/Uni Servo female BLUE silicon (10 pcs) |
1 x | Protector Connector Dean-T (1 pair) |
1 x | Conector JR Servo female (10 pcs) |
1 x | Red 4 mm connector holder |
1 x | Propeller APC 11x4.7 SF Pusher |
1 x | Propeller APC 10x4.7 SF Pusher |
1 x | Propeller APC 11x4.7 SF |
1 x | wire tensioner (silver) |
1 x | Turnbuckle M2x22/35 (2pcs) |
1 x | Support XT60 conector (2 pcs) |
1 x | 6 mm red aluminium threaded horn with patella |
1 x | Green smoke canister 100 g |
1 x | Connectors MPX black male |
1 x | Protector Connector MPX (1 pair) |
1 x | MR30 connector female |
1 x | Conector MT-60 (pair) |
1 x | Soldering PCBs 8pin, 5 pieces |
1 x | MPX PCB "Gender-Changer (5 pcs) |
1 x | Connectors MPX black female |
1 x | MR30 connector male |
1 x | "S" set for boats |
1 x | Contacto macho pin conector (10 pcs) |
1 x | Servo Connector Brackets (10 pcs) |
1 x | XH female balance (9S) connector (2 pcs) |
1 x | MPX PCB "6 Pins", 5 pieces |
1 x | Connectors MPX 8 pins (green) 1 pair (male-female) |
1 x | Bag connector 2 mm |
1 x | XT-60 connector (male) |
1 x | Conector male bateria 1s Kavan/Walkera 10cm cable |
1 x | Red 3m5 mm connector holder |
1 x | XT-30 connector (pair) |
1 x | Propeller APC 11x7 Glow/Gas |
1 x | Propeller APC 12x3.8 SF |
1 x | Propeller APC 11x3.8 SF |
1 x | Propeller APC 10x3,8 SF |
1 x | Balsa panel 10x100x1000 mm |
1 x | Turnbuckle M3 33x49 (2pcs) |
1 x | Turnbuckle M1,6x20/30 (2pcs) |
1 x | wire tensioner (black) |
1 x | XH male balance (6S) connector (2 pcs) |
1 x | Wing conexion 2 servos Futaba 50 cm |
1 x | PIN Connector female (100 pcs) |
1 x | XT60 Connector with Holder Male 2pcs |
1 x | Connectors DEANS (T) micro |
1 x | MPX housing with flange (4 pcs) |
1 x | Conector FUTABA Servo male (10 pcs) |
1 x | Magnetic Connect locking system |
1 x | Conector JR Servo female (50 pcs) |
1 x | Conector XT-150 6mm (Set: 5 pares) |
1 x | XT-90 connector (pair) |
1 x | Conector FUTABA Servo female BLUE silicon (10 pcs) |
1 x | Mounting frame MPX male connector |
1 x | Conector JAPAN G2 Set 5 pares |
1 x | Connectors MPX 8 pins with support (black) 1 pair (male-female) |
1 x | Blue smoke canister 140 g |
1 x | Connectors MPX male (PIN double) |
1 x | USB Interface REVOLECTRIX for CellPRO 10s |
1 x | Mounting frame MPX female connector |
1 x | Cable coupler M2 (10 uds) |
1 x | Propeller APC 10x4.5 MR Electric Pusher |
1 x | Propeller APC 10x7 Electric |
1 x | Kwik link AL M3 L:40 mm (2 pcs) + Pin Ø 2,5 mm |
1 x | Propeller APC 12x10 Electric |
1 x | Ball link V1 Ø7 M4/3 (6 uds) |
1 x | Propeller APC 11x5.5 Electric |
1 x | Propeller APC 10x7 SF |
1 x | Angled clevis with threaded rod M3 |
1 x | Kwik link aluminio M3 L:30mm (6 uds) pinØ1.6mm Left |
1 x | Pin 2,0 to cable coupler M2,0 ⌀ (6 pcs) |
1 x | Kwik link aluminio IZD. M2.5 L: 23mm (2 uds) pin Ø 1.6 |
1 x | Stainless steel 4 m Pull-Pull complet set (max 20 kg) |
1 x | Metal clevis M2,5 (10 uds) |
1 x | Stainless steel 3 m Pull-Pull complet set (max 20 kg) |
1 x | Turnbuckle M2,5x27/43 (2pcs) |
|
22,580.98EUR |