1 x | Extension MPX-MPX 20 cm |
1 x | EXTRA NG 74" yello/blue/red (Skywing RC) |
2 x | Starter EM Gear Power 80 |
1 x | Crimping tool |
2 x | Electric Landing Gear "Black Edition" ULTIMATUM 3.0 (Elektron Re |
1 x | EXTRA NG 74" white/red/blue (Skywing RC) |
1 x | Turbina KINGTECH K320 G5 |
1 x | SINGLE FUELING VALVE GASOLINE MK2 SMALL |
2 x | A/C quality beech plywood 600x300x0.8 mm |
2 x | Straightened rod Ø 14.0 mm x 1000 mm |
3 x | Sandwich carbon + poplar 4mm + carbon 480x290 mm |
2 x | Propeller APC 14x8.5 Electric Pusher |
1 x | 20 mm carbon horn |
1 x | EC5-Set female, simple quality, 2 x female pin, 1 x blue housing |
2 x | Piloto JET 1:3,5 |
1 x | Socket head ball link M3 (2 uds) |
1 x | Ball link M3 (10 pcs, flat ball) |
2 x | AX-60 starters (5 pcs) |
1 x | 100 Newtons FEMA absorber |
3 x | Yellow smoke canister 140 g |
1 x | Joint with bearing M2 22x5,5 |
2 x | White smoke canister 100 g |
2 x | M2/M1/6 3Diam long black ball link V1 (2 pcs) |
1 x | M2/M1/6 3Diam short black ball link V1 (6 pcs) |
1 x | M2,5 5Diam short black ball link V2 (2 pcs) |
1 x | Connectors banna oro 3,5 mm (M/F) |
2 x | Blue smoke canister 140 g |
2 x | Smoke set "S" |
1 x | Connectors banna oro 2 mm (M/F) (ultralight) |
1 x | Blue smoke canister 100 g |
1 x | Electric rocket starters (6 pcs) |
1 x | "S" set for boats |
1 x | Parachute expulsion foam |
1 x | Horn 5/20 with M2 Bearing |
1 x | Blue metalic ball link M3/3 azul (2 pcs) |
2 x | Yellow smoke canister 65 g |
1 x | Socket head ball link M3 (2 uds) |
1 x | 6 mm red aluminium threaded horn with patella |
1 x | Connectors banna oro 4 mm (M/F) |
1 x | Horn 16,5x20 mm (2 pcs) |
1 x | Threaded coupler ALU Left M3 Ø 4 (2 uds) |
1 x | Red smoke canister 140 g |
1 x | Threaded coupler ALU M2 Ø 3 (2 uds) |
1 x | Ball link M2,5 (10 pcs) |
1 x | Threaded coupler ALU Left M2,5 Ø 3 (2 uds) |
1 x | Tube Pitot to PIXHAWK |
1 x | Conector AS150 7mm antichispazo (Set: 2 pares) |
1 x | Joint with bearing M2,5 22x5,5 |
2 x | Green smoke canister 140 g |
1 x | 1/12 Pilot "Fighter" |
1 x | Connectors banna gold 5,5 mm (M/F) |
1 x | Cable control set |
1 x | Connectors banna oro 4 mm (M/F) (ultralight) |
1 x | Threaded coupler ALU M2 Ø 4 (2 uds) |
1 x | 300 Newtons FEMA absorber |
1 x | Short ball link M3 (6 uds) |
1 x | Brass control horn M4 short for wire (10pcs) |
1 x | M2,5 / 5Diam metal short ball link V3 (2 pcs) |
1 x | XH male balance (2S) connector (2 pcs) |
2 x | 200 Newtons FEMA absorber |
1 x | Brass control horn M2 short for wire (2 pcs) |
1 x | RH long aluminium horn (2pcs) |
1 x | Horn 5/15 with M2 Bearing |
1 x | Propeller POWER-PROP 7x7 |
1 x | Militarian pilot "Kamikaze" size 9cm (Slimline) |
1 x | Piloto Jet "Green" 1/6 Scale |
2 x | Brass rod Ø 0.8 mm x 1000 mm |
1 x | Glases Nimbus "Black" |
1 x | Cylidric hinge 33 mm Ø 2 mm (5 pcs) |
1 x | Screwdriver for Hexagon 1,5mm |
1 x | BALSA triangular 8x8x1000 mm |
1 x | Nylon hinge for flaps/gates 27x10,5 (2 pcs) |
1 x | |
1 x | 18 mm reinforced hinge |
1 x | Copier 2x20 cm pcs |
1 x | Starter Sullivan-STAR 603 DINATRON |
1 x | BALSA trip 2.0x10.0x1000 mm |
1 x | 70x23 Ø3.5 mm aluminium core wheel |
1 x | DYNAMOMETER S-1580 |
2 x | Motor Mega AC 16/07/06 |
4 x | Motor A40-10S V4 14-Pole |
1 x | Ball Link Plier |
1 x | Cylidric hinge 43 mm Ø 2,5 mm (5 pcs) |
1 x | Wheel FEMA 165 mm / 8 mm |
1 x | Pine wood slat 5.0x5.0x1000 mm |
1 x | Super Light Wheels(Sponge Tyre) Ø 55mm x 19mm (2pcs) axis Ø 3.5m |
1 x | Foam wheel Ø 38 mm (2 pcs) |
1 x | Wheel 38 mm V2 |
1 x | Glases Innovation Plus |
1 x | Micro flex hinge (12 uds) |
1 x | Ø 28 mm fiberglass motor-holder for electric motors |
1 x | Motor Mega AC 22/20/03 |
1 x | AXI 2808/20 V2 Long |
1 x | Cooler motor type 400 |
1 x | Cooler motor type 280 |
1 x | AXI 2820/14 V2 Long |
1 x | Ø 38 mm fiberglass motor-holder for electric motors |
1 x | Size "M" motor holder for class 600 |
1 x | Motor Mega AC 22/45/03 E |
1 x | Frontal support Speed 400/480 |
1 x | Motor Mega AC 16/25/04 |
1 x | Frontal support Speed 600 |
1 x | MOTOR MOUNT RODS AXI 53XX AND AXI 81XX 60MM (4PCS) |
1 x | Motor A30-12 XL Glider |
1 x | Motor A30-12 L V4 |
2 x | Motor Mega AC 16/25/02 |
1 x | Motor A30-14 M V2 6 Poles |
2 x | Motor A50-12 L Glider |
1 x | AXI 2820/10 V2 |
1 x | Actuator Electric 25 mm |
2 x | 20-25mm Servo Arm |
1 x | Spinner 3BL propeller pleg. 36 mm / 5,0 mm |
1 x | Central piece 62 mm 0º |
1 x | Central piece 42 mm 0º |
1 x | Central piece 42 mm + 5º |
1 x | Connectors MPX black female |
2 x | Astra (Top Model) |
1 x | 2 mm female connector (2 pcs) with safety connector |
2 x | ALBATROS 3.0 m (orange/white) |
1 x | Angle measurer |
1 x | XH female balance (7S) connector (2 pcs) |
1 x | 90x60 mm standart servo cover |
1 x | Connectors banna oro 2 mm (M/F) |
1 x | Bag connector 2 mm |
1 x | Mini neumatic retract 3 mm landing gear (Het-rc) |
3 x | Propeller Pleg CAM Carbon 15x8 |
1 x | Cable set PREMIUM Maxi, SUB-Done 4three fuselage/wing 200 cm |
1 x | Servo GO-13 MG 13g 2.8 Kg 0.12s/60º |
2 x | EVP Unit for AXI2208/xx and 2212/xx |
1 x | JETI SPIN 80 Pro |
1 x | Conector MT-60 (pair) |
1 x | Captador RCEXL para DA |
1 x | Servo M2x5/16 screw (4 pcs) |
1 x | Turbina X132 H "Compact Version" |
2 x | VPP system propeller for AXI VPP motors (spare) |
1 x | DUBRO - KWIK TWIST TOOL - TO TWIST STEEL WIRE (1 PC) (301) |
1 x | Conexion PREMIUM MAXI fuselaje/alas 200 cm one4one |
1 x | Kavan Car 25% nitro 1l |
1 x | Modulo reglaje avance V3 |
2 x | Actuador lineal HLS12-100210-7.4v |
1 x | Refueling Cap V3 Black |
1 x | Oracover light Grey 2m |
2 x | Conector MR-60 (pareja) |
1 x | Oracover GREY Seafire Sea 2m |
1 x | Oracover Black 10 m |
2 x | Prop Holder AXI 41xx V2 |
1 x | Central piece 47 mm - 5º |
1 x | Servo Arm 25T M3 KAVAN 6.5 / 19.6 mm |
1 x | Spinner 3BL propeller pleg. 36 mm / 4,0 mm |
1 x | Spare spinner 65 mm 3-Bl |
1 x | Battery charging cable XT60 |
1 x | Spare spinner 40/42 mm 3-Bl |
1 x | Central piece 42 mm - 5º |
1 x | Central piece 42 mm + 2,5º |
1 x | Charger ISDT 608AC 200W |
1 x | 45 mm white plastic spinner for folding propeller |
1 x | Central piece 52 mm 0º |
1 x | 50 mm white plastic spinner for folding propeller |
1 x | 30 mm Alu spinner 3 mm pleg. propeller |
1 x | Central piece 47 mm + 5º |
1 x | AX-60 starters (5 pcs) |
1 x | MR30 connector female |
1 x | Green smoke canister 100 g |
1 x | Adaptadores carga 6s JST-XH |
2 x | Red smoke canister 100 g |
1 x | Albatros ,spare cockpit (Top Model) |
2 x | Yellow smoke bombs AX-60 (5 pcs) |
2 x | Bidule 170 ARF 3.48 m |
1 x | 90x75 mm standart servo cover |
1 x | Connectors DEANS (T) micro |
1 x | Conector Servo female 4 pines |
1 x | Plastic caps for AIR BURTS (30 pcs) |
2 x | Albatros red/white (Top Model) |
1 x | Green smoke canister 65 g |
1 x | Connector CAN 15 |
2 x | BULLIT Wing 1095 mm |
1 x | Connectors banna oro 8,0 mm (Male) 5 pcs. |
1 x | 800TVL CMOS camera for FPV |
1 x | Contacto macho pin conector (10 pcs) |
1 x | White smoke bombs AX-18 (5 pcs) |
1 x | Pilot "Duke" Legends Series (Slimline) |
1 x | Ball link M1.6 (6 uds) |
2 x | Short ball link M1.6 (6 uds) |
1 x | Absorver mount set for 5-10 Kg models |
1 x | M2,5 Diam metal ball link V3 (2 pcs) |
1 x | M2/M1/6 3Diam long black ball link V1 (6 pcs) |
1 x | Ball link M2 (10 pcs) |
1 x | Straightened rod Ø 1.2 mm x 1500 mm |
1 x | Brass rod Ø 1.5 mm x 1000 mm |
1 x | Straightened rod Ø 1.0 mm x 1000 mm |
1 x | Straightened rod Ø 0.8 mm x 1000 mm |
1 x | Straightened rod Ø 6.0 mm x 1000 mm |
1 x | Birch plywood plate 600x300x1.5 mm |
1 x | Birch plywood plate 600x300x2.5 mm |
1 x | Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs) |
1 x | A/C quality beech plywood 600x300x6.0 mm |
1 x | Motor OS 3820-1200 electric |
1 x | Set fresas corte Vanadium Ø 2.3/2.35 mm (3 pcs) |
1 x | Nylon hinge 20x15x0,3 (10 pcs) |
1 x | A/C economy plywood 600x300x6+.0 mm |
1 x | EC-Cutter |
1 x | Boxed KIT OF 7 Rotary Burrs FINE |
1 x | Fabric scissors curved Premium, 16 cm / 6" length |
1 x | XH female balance (3S) connector (2 pcs) |
1 x | Bidule 55 2460 mm Cabina |
1 x | Magnetic Connect locking system |
1 x | Civilian pilot "G-Man" size 9cm (Slimline) |
1 x | Connectors DEANS 4 pins (1 pair) |
1 x | Protector Connector Dean-T (1 pair) |
1 x | Mounting frame MPX female connector |
1 x | 1/6 Pilot "Cindy" |
1 x | Remote electric ignition system |
1 x | 120x60 mm SLH KOVO wheel |
1 x | MPX screwable clips (5 pcs) |
1 x | 1/6 Pilot "Buddy" |
1 x | MPX PCB "Gender-Changer (5 pcs) |
1 x | Wing tips support for AX-18/AX-60 (2 pcs) |
1 x | White smoke bombs AX-60 (5 pcs) |
1 x | 1/12 Pilot "Tom" |
1 x | White smoke canister 65 g |
1 x | Civilian pilot "Curt" size 9cm (Slimline) |
1 x | Ventral support for AX-18/AX-60 |
1 x | Connectors MPX female |
1 x | EC5-Set male, simple quality, 2 x female pin, 1 x blue housing |
1 x | Pilot "Goose" (Slimline) |
1 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 6 mm |
1 x | Ball link M3 (6 uds) |
1 x | Long ball link M2 (6 uds) |
1 x | PPM Encoder Module |
1 x | PIX Hawk with accesories |
1 x | Blue metalic ball link M2/2 azul (2 pcs) |
1 x | Bungee HLG Premium |
1 x | Digital Air Speed Sensor And Pitot Tube Set |
1 x | AC-10 pre-rotacion with motor |
1 x | Catalog AERO-NAUT 2016 |
1 x | Axle for motor A30-XL V2 |
1 x | Shaft for A60-20/22/24S (120 mm) |
1 x | Motor Mega AC 22/30/02 |
1 x | AXI 2820/8 V2 Long |
1 x | AXI 2826/12 V2 |
1 x | Motor PERMAX BL-O 3520-920 (Extra 330 SC) |
1 x | AXI2217/9D |
1 x | Aluminium rod Ø 4.0 mm x 3000 mm |
1 x | Straightened rod Ø 1.5 mm x 1500 mm |
1 x | Brass hexagonal rod Ø 3 mm x 1000 mm |
1 x | Straightened rod Ø 5.0 mm x 1000 mm |
1 x | Straightened threaded rod M3 - 1m |
1 x | Brass hexagonal rod Ø 4 mm x 1000 mm |
1 x | Straightened rod Ø 2.0 mm x 1000 mm |
1 x | Brass hexagonal rod Ø 3.5 mm x 1000 mm |
1 x | Straightened rod Ø 2.5 mm x 1000 mm |
1 x | Straightened rod Ø 4.5 mm x 1000 mm |
1 x | Brass rod Ø 0.5 mm x 1000 mm |
1 x | Straightened rod Ø 0.5 mm x 1000 mm |
1 x | Brass hexagonal rod Ø 5 mm x 1000 mm |
1 x | Straightened rod Ø 5.5 mm x 1000 mm |
1 x | Straightened rod Ø 7.0 mm x 1000 mm |
1 x | Straightened rod Ø 8.0 mm x 1000 mm |
1 x | Straightened rod Ø 4.0 mm x 1000 mm |
1 x | A/C quality beech plywood 600x300x0.8 mm |
1 x | Balsa panel 8.0x100x1000 mm |
1 x | 25 mm Sandpaper file |
1 x | Set fresas corte acero-carburo Ø 0.5/1.8 mm (2 pcs) |
1 x | Pin type hinge Al 3,0x50 mm demount (2 pcs) |
1 x | Set brocas Ø 2.0-2.2-2.4-2.6 mm (4 pcs) |
1 x | Birch plywood plate 600x300x4.0 mm |
1 x | Balsa panel 6.0x100x1000 mm |
1 x | Birch plywood plate 600x300x1.2 mm |
1 x | Glases Stratus |
1 x | Heat Seal Iron |
1 x | Propeller diller for DLE30/DLE35RA/DLE40/DLE55/DLE61/EME 55/DA-5 |
1 x | Pin type hinge Al 6x98 mm (2 pcs) |
1 x | 43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs) |
1 x | 2 mm Prop Adapter M5 |
1 x | A/C quality beech plywood 1520x750x3.0 mm |
1 x | Aramid fibre shears Proton®, 21 cm / 8" length |
1 x | 25 mm reinforced hinge |
1 x | Gates hinge 30x16 mm (2 pcs) |
1 x | A/C quality beech plywood 600x300x6.0 mm |
1 x | Smart Soldering Iron 110W/230V AC |
1 x | A/C quality beech plywood BIRCH 600x300x1.0 mm |
1 x | Gates hinge black 30x16 mm (2 pcs) |
1 x | Servo arm with 6 mm hole to FEMA 9800A |
1 x | Propeller Pleg CAM Carbon 11x6 |
1 x | Central piece 52 mm + 5º |
1 x | 3l Smoke oil |
1 x | Sealing Iron STANDARD |
1 x | Motor B50-14 S |
1 x | Motor A50-14L Turnado V3 Glider |
1 x | A40 Backmountset complete |
1 x | Motor Mega AC 16/25/03 |
1 x | Motor A40-14 L 14-Pole V4 |
1 x | Motor Mega AC 16/25/04 COMBAT |
1 x | AXI 2826/10 V2 |
1 x | AXI 5320/28 V2 |
1 x | Motor A20-20 L EVO |
1 x | Z Spinner (CN) 30mm |
1 x | Spinner propeller pleg. 30 mm / 6,0 mm |
1 x | Spinner propeller pleg. 38 mm / 5 mm |
1 x | Spare white 38-45 mm spinner |
1 x | Canopy Sweet / Siesta |
1 x | Avia spare blue cockpit (Top Model) |
1 x | PVC 0,14 qmm servos wire Hitec/Mpx (5 m) |
1 x | Truck-trailer for gliders 720 x 239 mm |
1 x | Mixing tube for double syringes and cartridges (MR 1:1 and 2:1) |
1 x | Electric Landing Gear ULTIMATUM 3.0 (Elektron Re |
1 x | Propeller POWER-PROP 14x9 |
1 x | Motor KAVAN PRO 2225-1600 |
2 x | Propeller POWER-PROP 13x9 |
2 x | Propeller POWER-PROP 13x9 Izda |
1 x | Motor A40-10 L V2 14-Pole Glider |
1 x | Motor A30-10 XL V4 |
1 x | Planetary Gear 3,7:1incl. mountingadapter, pinion |
1 x | A50 Backmountset complete V3/V4 |
1 x | Motor A50-10L Turnado V3 Glider |
1 x | AXI 4120/18 V2 |
1 x | Motor B20-18 L + 4:1 gearbox |
1 x | A50 Backmountset complete |
1 x | AXI 5325/20 V2 |
1 x | Axle for motor A20-S (3 uds) |
1 x | Motor Mega AC 16/15/07 |
1 x | Motor Mega AC CAR 10 PRO |
1 x | Shaft for A60-L (140mm) |
1 x | Axle for motor A50-L |
1 x | Pilatus PC-21 + LG.2100 mm BLUE/WHITE (SebArt) |
1 x | GRE-18 RTR Crawler 1:18 Blue |
1 x | Receptor GRAUPNER GR-24 HoTT |
1 x | Propeller FIALA 15x8 3-Blade |
1 x | USB Adaptor OPTronics |
1 x | Spare white 30-36 mm spinner |
1 x | Spinner propeller pleg. 45 mm / 6 mm |
1 x | Spinner propeller pleg. 40 mm / 3,17 mm |
1 x | Spare white 36-38 mm spinner |
1 x | Spinner propeller pleg. 30 mm / 4,0 mm |
1 x | Bidule 55 V3 2460 mm |
1 x | Conector male bateria 1s Kavan/Walkera 10cm cable |
1 x | Glass fabric 160 g/m² (Twill weave) 100 cm x 5m |
1 x | DUPLEX 2.4EX Central Box 210 |
1 x | Lipo GENS 400 mAh 7.4v 35C |
1 x | Jodel D.9 BeBe 2.400 mm Kit |
1 x | Emisora FUTABA T18 SZ + R7208SB |
1 x | Battery LiPo GRE18 600 mAh 7.4v |
1 x | Servo GO-1017MG 4.5 kg.cm 0.10s/60º |
1 x | Sandwich carbon + poplar 3mm + carbon 290x160 mm |
1 x | Spinner propeller pleg. 40 mm / 4 mm |
1 x | White spinner propeller pleg. 42 mm / 6 mm |
1 x | Spinner propeller pleg. 40 mm / 6 mm |
1 x | Spinner propeller pleg. 38 mm / 3,17 mm |
1 x | White spinner propeller pleg. 50 mm / 6 mm |
1 x | Spinner fold propeller 50-55 mm (white spare spinner) |
1 x | Spinner propeller pleg. 30 mm / 5,0 mm |
1 x | Z Spinner (CN) 40mm |
1 x | Spinner fold propeller 50 mm (white spare spinner) |
1 x | Spinner propeller pleg. 40 mm / 5 mm |
1 x | PVC 0,14 qmm servo wire Futaba (5 m) |
1 x | Aluminium tube with fibreglass case ø35x1.5mm, 1m |
1 x | Cabin latch Fox MDM1 4m (pair) |
1 x | ARTIST 1.560 mm |
1 x | Truck-trailer for gliders 720 x 285 mm |
1 x | Aluminium tube with fibreglass case ø35x1.5mm, 500mm |
1 x | Canopy Astra |
1 x | Electric spoiler 300 mm (2 pcs) |
1 x | Small aluminium horn red (2pcs) |
1 x | Avia spare fouselage CF reinforced (Top Model) |
1 x | Challenger ARF (Top Model) |
1 x | 11 mm wing servo holder |
1 x | Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m |
1 x | Electric spoiler 185 mm (2 pcs) |
1 x | STANDOFF GAS ENGINE MOUNT 38 mm |
1 x | Astra wing Joinner (Top Model) |
1 x | Bidule 111 3000 mm Canopy |
1 x | Spring clamp for tube Ø29 mm ext 1pc |
1 x | Electric spoiler 250 mm (2 pcs) |
1 x | Albatros ,spare fuselage (Top Model) |
1 x | 13 mm wing servo holder |
1 x | 18 mm wing servo holder |
1 x | Actuator Electric 25 mm HIGH TORQUE |
1 x | Glass fabric 80 g/m² (FK 144, twill weave) 100 cm, pack/ 5 m |
1 x | Cierre cabina aluminio Ø5, I=16 mm |
1 x | Universal Colour Paste deep black 50 g |
1 x | OS 40-FG 4T Motor |
1 x | Fibra vidrio 25g 110 cm/ 3m (Interglass 02034, finish FE800 pl |
1 x | XT60 Connector with Holder Male 2pcs |
1 x | SKY RC T400Q Charger 4x100w |
1 x | Servo KST X20-7512 V8.0 82kg 8.4v |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø25 mm, Ø21 mm) |
1 x | DC24 II Transmitter case insert |
1 x | SAVAGE Max Red 1080 mm |
1 x | Servo KST BLS905X HV V2.0 8Kg 20mm |
1 x | LASER 73" 1.85m (05) PILOT |
1 x | Fibra de vidrio 80 g/m² (2 m x 100 cm) |
1 x | Epoxy L 40 min. (1 Kg) 715g Resina / 285g Hardener S (15 min) |
|
40,443.82EUR |