1 x | 5 LiPo XH>EH adapter |
1 x | CellPRO 4S Adaptader (GP/KO up to 4S) |
1 x | Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH |
1 x | CM-3 |
1 x | Cabling for Fox MDM1 wings |
1 x | Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm) |
1 x | 30 cm BEC cable (male) |
1 x | CC 02 |
1 x | 4 LiPo XH>EH adapter |
1 x | DPS Switch JR/JR |
1 x | CC 03 |
1 x | UBEC 6A KAVAN |
1 x | 3 copper lacquer wire Ø0,2 mm (1 m) |
2 x | 30 cm BEC cable (female) |
2 x | Copper lacquer wire Ø0,2 mm (5 m) |
2 x | 2 LiPo XH>EH adapter |
1 x | Connector Sub-D 2+5 Male |
3 x | Double conector with JR adapter and 200 mm extension |
2 x | Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm) |
1 x | Cabel charger transmitter GRAUPNER |
1 x | "Y" charging 4mm wire (2 IN-1 OUT). |
2 x | BEC 3A FOXY |
1 x | CC 05 |
1 x | 3 LiPo XH>EH adapter |
1 x | Horn 6/27 with M3 Bearing |
3 x | Threaded coupler ALU M2,5 Ø 3 (2 uds) |
1 x | Horn 6/20 with M3 Bearing |
3 x | 6 mm red aluminium threaded horn with patella |
1 x | Small aluminium horn gold (2pcs) |
2 x | Horn 5/20 with M2 Bearing |
1 x | 6 mm blue aluminium threaded horn with patella |
1 x | Threaded coupler ALU M3 Ø 5 (2 uds) |
2 x | Threaded coupler ALU M3 Ø 6 (2 uds) |
1 x | Threaded coupler ALU M2,5 Ø 6 (2 uds) |
1 x | Threaded coupler ALU M2,5 Ø 4 (2 uds) |
1 x | Brass control horn M4 short for wire (4 pcs) |
1 x | Threaded coupler ALU Left M3 Ø 4 (2 uds) |
1 x | Horn 5/15 with M2 Bearing |
2 x | Cable with accesories |
2 x | Small aluminium horn red (2pcs) |
2 x | Brass control horn M3 short for wire (2 pcs) |
1 x | Horn 16,5x20 mm (2 pcs) |
1 x | Threaded coupler ALU M2 Ø 4 (2 uds) |
2 x | Small aluminium horn blue (2pcs) |
2 x | SlowFlyer control horn (3 pcs) |
2 x | Jeti Black cap |
1 x | Propeller balancer |
1 x | Aluminium wide washer M4 Blue (4 pcs) |
1 x | Flat washer 3.2 mm (20 pcs) |
1 x | Flat washer 1.7 mm (20 pcs) |
1 x | Circlik for shaft 1.5 mm (10 pcs) |
1 x | Lock washer 2.2 mm (20 pcs) |
1 x | Aluminium cap bolt washer M3 red (8 pcs) |
1 x | Flat washer 4.3 mm (20 pcs) |
1 x | Spring lock washer 4.1 mm (20 pcs) |
1 x | Quicklock washer 3.5 mm (10 pcs) |
1 x | Quicklock washer 2.5 mm (10 pcs) |
1 x | M3-M4 rubber washer (8 pcs) |
1 x | Aluminium wide washer M3 blue (4 pcs) |
1 x | Quicklock washer 2 mm (10 pcs) |
2 x | Aluminium wide washer M4 Gold (4 pcs) |
1 x | MAX BEC |
1 x | Female prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm |
1 x | PowerBox SparkSwitch RS |
1 x | DPSI magnetic switch actuator (housing) |
1 x | SBEC 40 |
1 x | MAX BEC 2D plus EX |
1 x | Extension 5 lipos JST/C - JST |
1 x | Multi-adapter balancer JST/C - TP |
1 x | Interruptor RX/Batterie |
1 x | Extension 2/3 lipos JST - JST/C |
1 x | Prolonguer for Balancer Thunder Power 6S |
2 x | SPS 70V 100/200 A |
1 x | Opto Gas Engine Kill Switch |
1 x | Magnetic Interruptor MULTIPLEX |
2 x | SBEC Jeti |
1 x | Switching module high voltage SXH |
1 x | Interruptor SAFET-SWITCH 12HV Twinbatt |
1 x | Male Prolonger TP 4/5S |
1 x | Male/Female prolonguer for Balancer Thunder Power 6S |
1 x | MPS Gas-Cap-Powerswitch |
1 x | SPS 70V 140/280 A |
2 x | Opto Gas Engine Kill Switch |
1 x | Extension 5 lipos JST/C |
2 x | Extension 2/3 lipos JST/C |
1 x | XH male balance (5S) connector (2 pcs) |
1 x | Conector AS150 7mm antichispazo (Set: 2 pares) |
1 x | XH female balance (3S) connector (2 pcs) |
1 x | XH female balance (2S) connector (2 pcs) |
2 x | Connectors banna oro 2 mm (M/F) (ultralight) |
1 x | Banna gold connector 2,5 mm (M/F) |
2 x | Connectors banna oro 3,5 mm (M/F) |
2 x | Connectors banna oro 0,8 mm (M/F) |
1 x | Connectors DEANS (T) |
2 x | 30 cm DEANS female connector |
2 x | XH female balance (5S) connector (2 pcs) |
3 x | Connectors banna oro 8,0 mm (M/F) |
1 x | Conector BEC male (10 pcs) |
1 x | 2 mm male connector (2 pcs) with safety connector |
1 x | XH female balance (4S) connector (2 pcs) |
2 x | Connector CAN 15 |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø25 mm, Ø21 mm) |
1 x | Long ball link M3 (6 uds) |
1 x | Canopy Lock V1 M3 Blue (2 pcs) |
3 x | Male connector for 6 pines AWG |
2 x | Circlick securite |
1 x | Para-RC Mix |
1 x | APM2.6 Power module with 5.3V DC BEC |
2 x | PVC 0,25 qmm 4 line servos wire JR/Graupner (5 m) |
1 x | Silicone 0,50 qmm servos wire Futaba (100 m) |
1 x | Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH |
1 x | Cabel "Y" 30 cm (graupner) |
1 x | 20 mm carbon horn |
2 x | Threaded coupler ALU Left M2,5 Ø 3 (2 uds) |
3 x | Horn 20x28,5 mm (2 pcs) |
3 x | Control horn long w/ball |
2 x | RH long aluminium horn (2pcs) |
1 x | 5 mm M2 variable inclined horn |
1 x | Multi-adapter balancer JST - TP |
1 x | XH female balance (7S) connector (2 pcs) |
1 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 4 mm |
1 x | Adjustable brass horn threaded M3 |
1 x | Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch |
1 x | Set Threaded coupler ALU M2,5 Ø 4 (2 uds) |
1 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 6 mm |
1 x | Threaded insert M3 (4 pcs) |
1 x | Hexagonal Nut M1 (10 pcs) |
1 x | Nut for mounting M2,5 (4 pcs) |
1 x | wing/fuselage connector for 16 pines AWG 20-24 |
1 x | Blind nut M6 (4 pcs) |
2 x | Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm |
1 x | Connector Sub-D 2+5 Female |
1 x | Female connector for 10 pines AWG |
1 x | Lock nut M6 (10 pcs) |
1 x | Male connector for 12 pines AWG |
2 x | Blind nut M2 (10 pcs) |
1 x | Male connector for 16 pines AWG |
1 x | Aluminium cap bolt washer M3 black (8 pcs) |
1 x | Female connector for 6 pines AWG |
1 x | 48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs) |
1 x | Pin hinge 34x16 mm (10 uds) |
1 x | 25 mm reinforced hinge |
1 x | Flap hinge (6 pcs) |
1 x | Miniature brass strap hinge, 1 m |
1 x | Fast'n EZ-CA-Hinge, lite (12 uds) |
1 x | Gates hinge aluminium (1 pcs) |
1 x | 15 mm reinforced hinge |
1 x | 67 mm cylidric hinge Ø 5 mm (4 pcs) |
1 x | Cylidric hinge 43 mm Ø 2,5 mm (5 pcs) |
1 x | Carbon fiber rod 7.0 mmx1000 mm |
2 x | Carbon fiber rod 3.0 mm x 1000 mm |
2 x | Carbon fiber rod 20 mmx1000 mm |
2 x | Carbon fiber flat 1000x3.0x1.0 mm |
1 x | Blind nut M5 (4 pcs) |
1 x | JETImodel DPS 40 |
1 x | Anodized alum. M4x0,7x20 mm Button Head screw (4 dark blue pcs) |
1 x | 10 mm floating pad (72 pcs) |
1 x | Black copper lacquer wire Ø0,2 mm (5 m) |
1 x | Blind nut M8 (10 pcs) |
1 x | Blind nut M3 (4 pcs) |
2 x | Threaded insert M4 (4 pcs) |
1 x | Male connector for 10 pines AWG |
2 x | Blind nut M4 (4 pcs) |
1 x | Anodized alum. M4x0,7x20 mm Flat Head screw (4 lilac pcs) |
3 x | Treaded hexagonal socket insert M4 Br (4 pcs) |
1 x | Threaded insert M5 (10 pcs) |
1 x | Aluminium cap bolt washer M4 green (8 pcs) |
1 x | SPARK Switch 5.9v |
1 x | Hexagonal Nut M4 (10 pcs) |
1 x | Anodized aluminium M3x0,5x20 mm Sokect Head screw (4 lilac pcs) |
1 x | Anodized alum. M3x0,5x20 mm Flat Head screw (4 blue pcs) |
2 x | PWC6 PowerWingConnector for 6 servos with fuselage socket |
2 x | MPX Support |
1 x | Connectors DEANS (T) micro |
2 x | MPX Support (2 pcs) |
1 x | Bag connector 2 mm |
1 x | MPX screwable clips (4 pcs) |
1 x | Mounting frame MPX female connector |
1 x | XH male balance (8S) connector (2 pcs) |
1 x | XH male balance (9S) connector (2 pcs) |
1 x | MR30 connector female |
2 x | KIRA 400-27 |
2 x | PYRO 700-45 Long Axi |
2 x | KIRA 600-17 |
3 x | PYRO 800-40 Long Axi |
3 x | PYRO 750-50L Competition |
3 x | KIRA 480-26 5,2:1 |
3 x | PYRO 750-50L |
3 x | KIRA 500-30 6,7:1 |
1 x | Radial heatsink for MPJ AC25/35-xx motor |
2 x | Indoor motor holder |
1 x | Motor holder AXI |
2 x | Fan for A60 |
1 x | Fiberglass motor-holder for electric motors |
2 x | Fiberglass motor-holder for electric motors |
2 x | Cooler motor type 150 |
1 x | A50 Motor Mount Alu complete set |
1 x | Size "M" motor holder for class 400 |
1 x | Futaba 38 mm servo arm with ball link |
1 x | XTorque CFK Servohebel 38 HITEC 25T |
1 x | 46 mm Futaba servo arm tandem with ball link |
1 x | HITEC 20 mm servo arm with ball link |
3 x | PYRO 700-45 |
1 x | Motor Scorpion HKIII 4035-560 Kv |
1 x | KIRA 480-43 |
2 x | PYRO 650-103 Long Axi |
2 x | KIRA FAI 5F5/4s |
3 x | KIRA 600-38 6,7:1 |
3 x | DRIVE 510 (KIRA 480-34 5,2:1 + Koby 55 LV) |
3 x | KONDOR 15-92 |
3 x | KIRA 600-24 6,7:1 |
2 x | KIRA 600-16 |
3 x | KIRA 480-34 |
3 x | PYRO 800-48 Long Axi |
4 x | PYRO 900-52L |
3 x | KIRA 480-43 5,2:1 |
3 x | MAMBO 17 |
4 x | KIRA 480-34 5,2:1 |
3 x | PYRO 600-11 |
2 x | KIRA 400-34 |
2 x | KIRA 600-22 6,7:1 |
3 x | KIRA 500-26 6,7:1 |
3 x | DRIVE 550 (KIRA 500-26 6,7:1 + KOBY 55 LV) |
1 x | |
2 x | Motor PERMAX BL-O 3520-920 (Extra 330 SC) |
1 x | |
1 x | Receiver bed (Blue) |
2 x | Size "L" motor holder for class 600 |
1 x | Size "M" motor holder for class 400 |
1 x | Central support Speed 280 |
1 x | Electric coversion set |
1 x | Frontal support Speed 600 |
1 x | Powerset FunJet 2 with Vectorcontrol unit |
1 x | Motor mount M |
1 x | Futaba 50/60 mm servo pull-pull double arm with ball link |
1 x | Motor Advance 50-6 |
1 x | 17 mm servo arm with ball link DES Graupner |
1 x | Hitec 46 mm servo arm with ball link |
1 x | Small control horn with bearing (2 pcs) |
1 x | Long horn 50x26 |
1 x | Threaded coupler ALU M2 Ø 3 (2 uds) |
1 x | Horn DU-BRO 1/2 (2 pcs) |
1 x | Horn mando small (2 pcs) |
1 x | Brass control horn M2 large for wire (2pcs) |
2 x | Horn mando long (2 pcs) |
1 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 7 mm |
1 x | Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 4 mm |
1 x | Micro control horn T2 Ø 1 |
1 x | 6 mm M3 variable inclined horn |
1 x | Medium extra-strong control horn with bearing 2,8x24 |
1 x | DUPLEX USB Adapter |
1 x | VARIO module Hott |
1 x | Carbon fiber rod 1.5 mm x 2000 mm |
1 x | Receptor GRAUPNER GR-24 HoTT |
1 x | Receptor MINIMA 6S HITEC |
1 x | DUPLEX 2.4EX MSpeed PITOT <300 Km/h |
1 x | Multiplex True Air Speed + Vario Sensor to M-LINK |
1 x | Landing gear Rocket 400 |
1 x | Marker ties (20 pcs) |
1 x | Aluminium cap bolt washer M4 blue (8 pcs) |
1 x | Servo Mount M (blue) |
1 x | Lightweight aircraft wheel, 50x18.5x3 |
1 x | 1/6 Pilot "Buddy" |
1 x | Carbon fiber rod 0.5 mmx1000 mm |
1 x | Nut for mounting M3 (10 pcs) |
1 x | M3 black washers (4 pcs) |
1 x | Transmitter GRAUPNER MZ-24 Pro |
1 x | MZ-10, 5 Channel HoTT |
1 x | Female connector JST SH 1.0mm with 10 cm wire |
1 x | Foreman, scale 1:32 |
1 x | Propeller G-Sonic 20x8 |
1 x | Receiver replacement antenna, approx. 15 |
2 x | DC Small for MultiLog & UltraLight |
1 x | MultiLog Altimeter |
1 x | OSD Telemetry sensor |
1 x | Battery voltage telemetry |
1 x | MRPM-AC revolution sensor |
1 x | DUPLEX MUI 30 Sensor |
1 x | DUPLEX 2,4GHz MRPM-AC EX |
1 x | DUPLEX 2.4EX MUI 75 |
1 x | L-39 Albatros Scale 1:4.75 1991 mm |
1 x | F4E Phantom Scale 1:7 |
1 x | ASPIRE Red ARF 2.000 mm |
1 x | F-16 Scale 1:6 Camuflaje Grey (1.630mm) |
1 x | Red aluminium servo arm V1-Futaba 15 mm iM2 |
1 x | Spinner Alumin. fixed propeller 30 mm / 3,2 mm |
1 x | Blue aluminium servo arm V1-Hitec 20 mm M2 |
1 x | Red aluminium servo arm V1-Futaba 23 mm M2 |
1 x | 5 mm M2 variable horn |
1 x | Carbon fiber rod 2.5 mmx1000 mm |
1 x | Carbon fiber rod 16 mm x 1000 mm |
1 x | Carbon fiber rod 1.5 mm x 1000 mm |
1 x | Carbon fiber rod 12 mm x 1000 mm |
1 x | Carbon fiber flat 1000x3.0x0.5 mm |
1 x | Carbon fiber flat 1000x6.0x0.8 mm |
1 x | Carbon fiber rod 1.5 mm x 1000 mm |
1 x | Carbon fiber rod 2.0 mmx1000 mm |
1 x | Carbon fiber rod 0.5 mmx1000 mm |
1 x | Squared carbon wing joinner 5x5x220 mm |
1 x | Spring lock washer 2.6 mm (20 pcs) |
1 x | Switc electronic 30 Amp |
1 x | Titanium M3x0,5x8 mm Flat Head screw (4 pcs) |
1 x | Threaded insert M6 (10 pcs) |
1 x | Male connector for 20 pines AWG |
1 x | 40,0 mm hydro-propeller (left hydropropeller) |
1 x | Transmitter Crystal 35 Mc/s Ch 62 |
1 x | Spring pin Ø 1 x 6 mm (10 pcs) |
1 x | Female connector for 16 pines AWG |
2 x | EC5-Set male, simple quality, 2 x female pin, 1 x blue housing |
2 x | Conector JR Servo female (10 pcs) |
2 x | MPX PCB "Gender-Changer (5 pcs) |
1 x | MPX PCB "6 Pins", 5 pieces |
1 x | Ø 38 mm fiberglass motor-holder for electric motors |
1 x | Cables suitable for the motor AC 28/7 |
1 x | Bearings for motor HACKER C50 |
1 x | KIRA 480-38 |
2 x | KIRA 600-20 |
2 x | KIRA 600-30 6,7:1 |
1 x | PYRO 700-56L |
2 x | KIRA 480-31 5,2:1 |
1 x | Telemetry interface ALTIS 6 cm |
1 x | Soldering PCBs 8pin, 5 pieces |
1 x | Connectors MPX 8 pins (green) 1 pair (male-female) |
1 x | Mounting frame MPX male connector |
1 x | MPX housing with flange (4 pcs) |
1 x | Conector male bateria 1s Kavan/Walkera 10cm cable |
1 x | Optotronix Aurora Plug |
1 x | XT-30 connector (pair) |
1 x | Conector MT-60 (pair) |
1 x | Protector Connector MPX (1 pair) |
1 x | Sun Cover PC 21 XXL (JMB Jets) |
2 x | KIRA 480-38 5,2:1 |
3 x | KIRA 600-20 6,7:1 |
2 x | KIRA 500-36 6,7:1 |
1 x | KIRA 400-39 5,2:1 |
1 x | Connectors DEANS 4 pins (1 pair) |
1 x | EC5-Set female, simple quality, 2 x female pin, 1 x blue housing |
1 x | MPX PCB "4 Pins", 5 pieces |
1 x | MPX Sub-D Adaptor |
1 x | Conector FUTABA Servo female (10 pcs) |
1 x | XT60 Connector with Holder Male 2pcs |
1 x | Connectors MPX female (PIN double) |
1 x | 2 mm female connector (2 pcs) with safety connector |
1 x | Conector FUTABA Servo female BLUE silicon (10 pcs) |
1 x | Connectors banna oro 4 mm (M/F) (ultralight) |
1 x | Silicone 0,25 qmm servos wire Graupner (5 m) |
1 x | Conector MR-60 (pareja) |
1 x | Contacto macho pin conector (10 pcs) |
1 x | Conector JR/Uni Servo female BLUE silicon (10 pcs) |
1 x | Connectors banna oro 6,0 mm (M/F) |
1 x | Cooler motor type 280 |
1 x | Frontal support Speed 280 |
1 x | Motor Mount for Multiplex FunJet |
1 x | Size "M" motor holder for class 600 |
1 x | Ø 28 mm fiberglass motor-holder for electric motors |
1 x | Sun Cover ULTIMATUM 2.0 (Hispano Aviacion) |
1 x | PYRO 650-53L EJE LARGO |
1 x | SLICK 360-A 104" (2640 mm) |
1 x | EDGE 540-A 105" (2660 mm) |
1 x | PYRO 600-12 |
|
46,056.18EUR |