1 x | ABS tube 5.0x4.0x1000 mm |
1 x | ABS tube 9.0x8.0x1000 mm |
1 x | CF tube (L 1000 mm Ø0,7 mm, Ø0,3 mm) |
1 x | ABS tube 7.0x5.0x1000 mm |
1 x | ABS tube 6.0x5.0x1000 mm |
1 x | Medidor ángulos y/o incidencias |
1 x | ABS tube 2.0x1.0x1000 mm |
1 x | Thinwall Stainless Steel Tubing 28x0.6x1000 mm |
1 x | Angle measurer |
2 x | Steel tube (L 1000 mm Ø10 mm, Ø9,7 mm) |
1 x | ABS tube 3.0x2.0x1000 mm |
1 x | Steel tube (L 1000 mm Ø6 mm, Ø5,7 mm) |
2 x | ABS tube 4.0x2.0x1000 mm |
1 x | ABS tube 8.0x6.0x1000 mm |
2 x | ABS tube 5.0x4.0x156 mm |
1 x | Steel tube (L 1000 mm Ø5 mm, Ø4,7 mm) |
1 x | Truck-trailer for gliders 720 x 285 mm |
1 x | ABS tube 3.0x1.0x1000 mm |
1 x | ABS tube 20.0x18.0x1000 mm |
1 x | Propeller balancer |
1 x | Truck-trailer for gliders 720 x 239 mm |
1 x | Surface Indicator Gauge Small |
1 x | Angle of incidence meter |
3 x | Steel tube (L 1000 mm Ø9 mm, Ø8,7 mm) |
2 x | Propeller balancer |
1 x | Field folding model stand SebArt |
1 x | Field folding model stand |
1 x | ABS tube 3.0x2.0x330 mm |
1 x | ABS tube 6.0x4.0x1000 mm |
3 x | WingFix ULTRA Black Edition |
1 x | ABS tube 4.0x3.0x1000 mm |
1 x | Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm) |
1 x | Steel tube (L 1000 mm Ø7 mm, Ø6,7 mm) |
2 x | ABS tube 7.0x6.0x1000 mm |
1 x | 6 mm red aluminium threaded horn with patella |
1 x | Threaded coupler ALU M2,5 Ø 3 (2 uds) |
3 x | Threaded coupler ALU M2 Ø 4 (2 uds) |
1 x | Beech dowels 4.0 x 1000 mm |
1 x | BALSA trip 4.0x4.0x1000 mm |
1 x | Horn 20x28,5 mm (2 pcs) |
1 x | Horn 5/15 with M2 Bearing |
1 x | Walnut wood slat 2.0x2.0x1000 mm |
2 x | Pine wood slat 2.0x2.0x1000 mm |
1 x | SlowFlyer control horn (3 pcs) |
2 x | Pine wood slat 3.0x7.0x1000 mm |
1 x | Pine wood slat 2.0x10.0x1000 mm |
1 x | BALSA triangular 8x8x1000 mm |
1 x | Small aluminium horn blue (2pcs) |
1 x | Linden wood slat 3.0x3.0x1000 mm |
1 x | BALSA trip 3.0x5.0x1000 mm |
1 x | Mahogany wood slat 1.5x1.5x1000 mm |
1 x | BALSA triangular 10x10x1000 mm |
1 x | BALSA trip 5.0x5.0x1000 mm |
1 x | Horn with ball 55x40 |
1 x | BALSA trip 2.0x10.0x1000 mm |
1 x | Liston HAYA 8 x 8 x 1000 mm |
1 x | Horn for flap control (1 pcs) |
1 x | Pine wood slat 3.0x10.0x1000 mm |
1 x | OBECHI sheet 2.0x3.0x1000 mm |
1 x | BALSA leading edge 8x10x1000 mm |
2 x | BALSA trip 2.0x2.0x1000 mm |
2 x | 20 mm carbon horn |
1 x | Horn 6/35 with M3 Bearing |
2 x | Threaded coupler ALU Left M2,5 Ø 4 (2 uds) |
1 x | Brass control horn M4 short for wire (4 pcs) |
1 x | Pine wood slat 6.0x6.0x1000 mm |
1 x | Brass control horn M3 short for wire (2 pcs) |
1 x | Cable with accesories |
1 x | Mahogany wood slat 3.0x3.0x1000 mm |
1 x | BALSA triangular 15x15x1000 mm |
1 x | Pine wood slat 1.5x3.0x1000 mm |
1 x | LightBox SR |
1 x | USB Mini Camera endoscope |
1 x | 800TVL CMOS camera for FPV |
3 x | Big-Malibu XL Roof box with surfboard rack GREY |
1 x | Combo lighting module with covering drop shape |
1 x | Conector BEC male (10 pcs) |
1 x | Extension 90 cm (Futaba) |
1 x | Hard brass tubing (L 1000 mm, Ø18.0 mm, Ø16.0 mm) |
1 x | Hard brass tubing (L 1000 mm, Ø10.0 mm, Ø9.1 mm) |
1 x | ABS tube 18.0x16.0x1000 mm |
1 x | Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm) |
1 x | Support Flush MPX Conector (6 pcs) |
1 x | Support conector MPX (6 pcs) |
1 x | Carbon tube (L 1000 mm, Ø4 mm, Ø3 mm) |
1 x | Hard brass tubing (L 1000 mm, Ø4.0 mm, Ø3.1 mm) |
1 x | Carbon tube 3K (L 1000 mm, Ø 8 mm, Ø 7 mm) |
1 x | Jet Afterburner Simulator NF-Jet2YY Set |
1 x | Jet Afterburner Simulator NF-Jet2 |
1 x | Complete kit CAT 966G II WEDICO-construction-models |
1 x | Threaded coupler ALU M3 Ø 4 (2 uds) |
1 x | Control horn long w/ball |
1 x | LH long aluminium horn L31xH30 (2pcs) |
2 x | LH long black aluminium horn L31xH30 (2pcs) |
2 x | Short adjustable control horn 3x24 |
2 x | Threaded coupler ALU M2,5 Ø 6 (2 uds) |
1 x | Threaded coupler ALU M2,5 Ø 4 (2 uds) |
1 x | Threaded coupler ALU M3 Ø 5 (2 uds) |
1 x | Horn micro type4 Ø 0,5 (2 pcs) |
1 x | Kit wheel loader 966G II without electrics, without hydrauli |
1 x | Steel tube (L 1000 mm Ø4 mm, Ø3,7 mm) |
1 x | Spinner INO 51 mm Chrome (Imitacion metal) |
1 x | Long horn 50x26 |
2 x | Micro control horn (2 pcs) |
2 x | Ferrita 14x8x5.5 mm |
1 x | Steel tube (L 1000 mm Ø8 mm, Ø7,7 mm) |
2 x | Ferrita con funda |
1 x | ABS tube 5.0x3.0x1000 mm |
1 x | ABS tube 8.0x7.0x1000 mm |
1 x | DPSI LR-S (with push buttons) |
1 x | DPSI V-Match |
1 x | Fuel Dot (RED) |
1 x | RX cabel |
1 x | DPSI magnetic switch actuator (housing) |
3 x | Pin hinge 26x11 mm (10 uds) |
3 x | Pin hinge 39x20 mm (10 uds) |
3 x | Gates hinge 30x16 mm (2 pcs) |
1 x | ABS Strip 1.0x4.0x1000 mm |
2 x | Cross Connector 4.0 mm x 1000 mm |
1 x | Streamline Stainless Steel Tubing 12.3x7.7x1000 mm |
2 x | Streamline Stainless Steel Tubing 14.5x9.6x1000 mm |
1 x | ABS angle 1.5x1.5x1000 mm |
3 x | ABS angle 3,0x3,0x1000 mm |
1 x | Cable grommet Ø 3.2 mm (4 uds) |
2 x | Allen wheel collar M4x6 |
1 x | Aluminium alloy coupler for carbon tube 6/M4 |
1 x | Crimping sleeves for cable 0.70 mm (10 pcs) |
1 x | Landing gear frontal support 25x32x16 |
1 x | Split M1,2x10 (10 pcs) |
1 x | Steering arm 12 mm Ø 4 mm (2 uds) |
1 x | Carbon fiber rod 1.5 mm x 1000 mm |
1 x | Carbon fiber rod 0.5 mmx1000 mm |
1 x | Carbon fiber rod 4.0 mmx1000 mm |
1 x | Carbon fiber rod 3.0 mm x 1000 mm |
1 x | Carbon wing joinner 13,4 mm Ø 0,48 mm |
1 x | Carbon fiber rod 1.5 mm x 2000 mm |
1 x | AXI 2814/10 V2 Long |
1 x | AXI 2826/6 V2 |
1 x | DPSI Ampere & Voltage bundle |
1 x | EWC3 100 cm wing connector |
1 x | Fuel Dot (Black) |
2 x | DPSI OCP Overload protection |
1 x | DPSI Micro SingleBat 5.9V/7.2V magnetic switch |
1 x | DPSI Micro - DualBat 5.9V / 7.2V JR-JR (Dual Power Supply) |
1 x | Filter Capacitor JR |
1 x | Heat sink for Optotronix LEDs |
1 x | DPSI Micro SingleBat 5.9V/7.2V F3A Edition magnetic switch |
1 x | Spinner NUT 1/4x28 |
1 x | Spinner INO 75 mm Chrome (Imitacion metal) |
1 x | Spinner Alumin. fixed propeller 40 mm / 4,0 mm |
1 x | Spinner Alumin. fixed propeller 45 mm / 4,0 mm |
2 x | Spinner Alumin. fixed propeller 30 mm / 3,2 mm |
1 x | Spinner Alumin. fixed propeller 40 mm / 5,0 mm |
1 x | Spinner NUT M5 |
1 x | Spinner fixed propeller 42 mm / 5,0 mm |
4 x | Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs) |
3 x | 48 mm cylidric hinge Ø 2,5 mm (5 pcs) |
3 x | Pin type hinge Al 3,0x50 mm (2 pcs) |
2 x | Small pinned hinge (12 uds) |
3 x | 25 mm reinforced hinge |
1 x | Support Filtro FESTO |
1 x | Support pumb/filter Xicoy X45 |
2 x | Support Antena 2.4 Ghz (2 pcs) |
1 x | Soporte filtro FESTO (4 pcs) |
1 x | Soporte grifo FESTO (2 pcs) |
1 x | Tapa estado carga XT-60 (6 pcs) |
1 x | Support ECU Xicoy X-45 |
1 x | Support XT60 conector (2 pcs) |
1 x | Support pump Xicoy X45 |
2 x | Recessed MPX connector support (6 pcs) |
1 x | Support FUEL DOT V3 |
1 x | Angle support XT60 conector |
1 x | ABS tube 12.0x10.0x1000 mm |
2 x | Small aluminium horn gold (2pcs) |
1 x | |
1 x | Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch |
1 x | Horns indoor |
1 x | 12 mm dogdrive props |
1 x | 5 mm Prop Adapter M6 |
1 x | Aluminun wheel collar 3 mm Ø (4 uds) |
1 x | Allen wheel collar M4x4 |
1 x | Aluminun wheel collar 4 mm Ø (4 uds) |
1 x | Allen wheel collar M3x3 |
1 x | Allen wheel collar M3x5 |
1 x | 3 mm Long Prop Adapter M5 |
1 x | 10 mm aluminium spinner (Kavan) |
1 x | Ball Link M2 with Ball and Hardware, 10 pcs |
1 x | Horn DU-BRO 1/2 (2 pcs) |
1 x | Combo KAVAN PRO 3536-1000 + RAY 40 SB |
1 x | Horn mando small (2 pcs) |
1 x | Electric Fuel Pump 12v |
1 x | Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 5 mm |
1 x | Medium extra-strong control horn with bearing 2,8x24 |
1 x | Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 6 mm |
1 x | 6 mm M3 variable horn |
1 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 6 mm |
1 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 7 mm |
1 x | Sistema LDS - Ø12 mmr servos Ø 6/25 spline 60º (Futaba) pitch 6 |
1 x | 6 mm aluminium horn with patella |
1 x | SPS Remote switch actuator |
1 x | DPSI RV Mini 6 (2008) |
1 x | Pins M connect Multipin connectors AWG 20-24 |
1 x | AXI 2814/6D V2 |
1 x | SHOCK CUB 102" 2.600 mm 38-50cc YELLOW (Seagull Models) |
1 x | L-Connector 1.0 mm x 1000 mm |
3 x | ABS "T" angle 4.0x4.0x1000 mm |
2 x | ABS "T" angle 8.0x8.0x1000 mm |
1 x | ABS rectangular profile 12x6.0x1000 mm |
1 x | Streamline Stainless Steel Tubing 7.5x4.5x1000 mm |
1 x | Rubber profile 10-2 mm 2M |
2 x | ABS angle 5,0x5,0x1000 mm |
1 x | Profile ABS half cane 5.0x1000 mm |
2 x | ABS angle 2,0x2,0x1000 mm |
1 x | Aluminum Bayonet / strongal D12 mm / 0.5 m |
1 x | Spinner NUT M6 |
1 x | DPSI Micro - RCS |
1 x | Receiver R7008SB FASSTest |
1 x | Soldering PCBs 8pin, 5 pieces |
1 x | Optotronix Aurora Plug |
1 x | SPS 70V 140/280 A |
1 x | DPS Switch JR/JR |
1 x | DPSI RV Mini 6 Magic with Gas-Cap switch |
1 x | DPSI Ampere battery backer |
1 x | OPTOTRONIX Aurora LCU |
1 x | Cessna SKYLANE T182 1.75m - Seagull Model |
1 x | PARAGON Trainer 46-55 1580 mm |
1 x | SCANNER 46-55 Sport Scale 1:7 ARF |
2 x | Rubber profile 6-2 mm 2M |
2 x | ABS angle 4,0x4,0x1000 mm |
1 x | Profile ABS half cane 6.0x1000 mm |
1 x | Profile ABS Square 2 x 1000 mm |
1 x | Profile ABS Square 4 x 1000 mm |
1 x | U Profile ABS 5,0x10,0x1000 mm |
2 x | ABS angle 6,0x6,0x1000 mm |
1 x | U Profile ABS 1,0x2,0x1000 mm |
1 x | Profile ABS triangular 4.0x1000 mm 90º |
1 x | Profile ABS half cane 7.0x1000 mm |
1 x | Streamline Stainless Steel Tubing 15.5x8.5x1000 mm |
1 x | U Profile ABS 2,0x4,0x1000 mm |
1 x | U Profile ABS 3,0x6,0x1000 mm |
1 x | Profile ABS Square 1 x 1000 mm |
2 x | Rubber profile 8-2 mm 2M |
2 x | Profile ABS triangular 6.0x1000 mm 90º |
2 x | L-Connector 4.0 mm x 1000 mm |
1 x | Profile ABS half cane 3x1000 mm |
1 x | Profile ABS half cane 2.0x1000 mm |
1 x | ABS rectangular profile 10x5.0x1000 mm |
1 x | Servo Controller Fibra optica |
1 x | Swashplate metal LAMA |
1 x | T-shape holder metal LAMA |
1 x | Program 5v SIO RS 232 |
1 x | Flybar support metal LAMA |
1 x | Carbon blade 230 mm |
1 x | PPS-4D Propeller |
1 x | Spinner Alumin. fixed propeller 40 mm / 3,2 mm |
4 x | ROBART POINT HINGE 4,7mm (5 pcs) |
2 x | Miniature brass strap hinge, 1 m |
3 x | Long pinned hinge (12 uds) |
2 x | Pin type hinge Al 6x98 mm (2 pcs) |
1 x | Unmounted aluminium pin 6x98 mm (2 pcs) |
2 x | Long pinned hinge (6 uds) |
2 x | Gates hinge black 30x16 mm (2 pcs) |
2 x | Round flex hinge (12 uds) |
2 x | Medium pin type hinge (12 uds) |
2 x | Small pinned hinge (6 uds) |
1 x | Pin type hinge Al 4,5x70 mm demount (2 pcs) |
1 x | Nylon hinge 15x0,3 (10 pcs) |
1 x | Nylon hinge for flaps/gates 27x10,5 (2 pcs) |
1 x | Gates hinge |
1 x | Pin type hinge Al 4,5x70 mm (2 pcs) |
2 x | 67 mm cylidric hinge Ø 4,5 mm (5 pcs) |
2 x | Cylidric hinge 33 mm Ø 2 mm (5 pcs) |
1 x | Fast'n EZ-CA-Hinge, lite (12 uds) |
2 x | Pin hinge 34x16 mm (10 uds) |
1 x | Fast'n EZ-CA-Hinge (12 uds) |
1 x | Flap hinge 33x9 mm (6 pcs) |
1 x | 18 mm reinforced hinge |
2 x | Large flex hinge (12 uds) |
1 x | 43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs) |
1 x | Robart Door Hinge (Pk2) |
1 x | 76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
1 x | 15 mm reinforced hinge |
1 x | 67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
1 x | Cylidric hinge 43 mm Ø 2,5 mm (5 pcs) |
1 x | 48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs) |
1 x | Nylon hinge 20x20x0,3 (10 pcs) |
1 x | Gates hinge aluminium (1 pcs) |
1 x | 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs) |
1 x | Nylon hinge for flaps 33x9 (2 pcs) |
2 x | 67 mm cylidric hinge Ø 5 mm (4 pcs) |
1 x | Small flex hinge (12 uds) |
1 x | Micro flex hinge (12 uds) |
2 x | Pin type hinge Al 3,0x50 mm demount (2 pcs) |
1 x | Pin type hinge Al 4,5x70 mm to wire (2 pcs) |
1 x | Flap hinge (6 pcs) |
1 x | Aro pasacable Ø20 mm (4 pcs) |
|
18,541.69EUR |