17.00EUR

Hardener Aero EPH 161 (500 g)
[R11212505]

Hardener Aero EPH 161 (500 g)

Hardener for Epoxy Resin L and L 20, EP Gel coat colourless and Mould Resin P
Contains no formaldehyde and no paraformaldehyde
Epoxy Resin L
Processing time: 90 minutes
Mixing ratio:
100 : 25 parts by weight of resin to hardener
100 : 29 parts by volume of resin to hardener
Curing time: 24 h at room temperature, followed by hot curing for: approx. 10 h at 60 °C
Max. heat distortion temperature after annealing: 120 °C
Laminate structures for vehicle construction in combination with this product and epoxy resin L are approved by the TÜV-Süd. Process instructions/TÜV-Report (unfortunately only in German)
Epoxy Resin L 20
The combination of L 20 and Hardener EPH 161 yields a low-viscosity laminating resin that exhibits superior impregnating and wetting properties to glass, aramid, and carbon fibres. In conjunction with L 20, hardener EPH 161 results in a long service life for the resin compound with very high mechanical and dynamic strengths and perfect curing in both thick (> 2 cm) and thin (1,5 mm) laminates. Before they can obtain the specified mechanical properties, the laminates must be post-cured for about fifteen hours at 60 °C after their initial cold-curing period.
The system L 20 + EPH 161 is approved for the construction of gliders.
Processing time: 90 minutes
Mixing ratio:
100 : 25 parts by weight of resin to hardener
100 : 29 parts by volume of resin to hardener
Curing time: 24 h at room temperature, followed by post-curing: for 15 h at 60 °C
Gel coat colourless
Processing time: 90 minutes
Mixing ratio:
100 : 24 parts by weight EP Gel coat : Hardener EPH 161
Curing time: 24 h at room temperature, afterwards hot curing approx. 10 h/60 °C (recommended, but not necessary).
Max. heat distorsion temperature after annealing: approx. 120 °C
Mould resin P
Processing time: 90 minutes
Mixing ratio:
100 : 17 parts by weight Mould Resin P : Hardener EPH 161
Gelling time: approx. 4 h
Curing time: 24 h at roomtemperature, afterwards hot curing: approx. 15 h/60 °C
Please order resin L and L 20, gel coatcolourless and mould resin P separately

under request

Reviews

Quick Find

Shopping Cart

1 x	Connectors banna oro 0,8 mm (M/F)
1 x	Connectors banna oro 4 mm (M/F)
1 x	Conector AS150 7mm antichispazo (Set: 2 pares)
1 x	XH male balance (2S) connector (2 pcs)
1 x	XH male balance (5S) connector (2 pcs)
1 x	30 cm DEANS female connector
1 x	Conector BEC male (10 pcs)
2 x	XH female balance (3S) connector (2 pcs)
1 x	Banna gold connector 2,5 mm (100 M/F pairs)
1 x	Conector BEC female (10 pcs)
1 x	XH female balance (4S) connector (2 pcs)
2 x	Wing connector 8pin with pin strip, plug & socket
1 x	Connectors banna oro 8,0 mm (M/F)
1 x	Connectors banna oro 3,5 mm (M/F)
1 x	EC5-Set female, simple quality, 2 x female pin, 1 x blue housing
1 x	Connectors banana oro 6,0 mm Ultralight (M/F)
1 x	Gold antispark 5,5 mm plug
1 x	Connectors banna gold 5,5 mm (M/F)
1 x	Banna gold connector 2,5 mm (M/F)
1 x	Optotronix Aurora Plug
1 x	Connectors banna oro 4 mm (M/F) (ultralight)
1 x	Connectors DEANS (T)
1 x	2 mm female connector (2 pcs) with safety connector
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs)
1 x	Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m
2 x	Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m
1 x	Cyanoacrylate MD GLUE plus 405, for extreme loads 20g
1 x	TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m
1 x	Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M
1 x	Glass fabric tape 225 g/m² (Silane, plain) 30 mm X 100m
2 x	Digital scale up to 40 kg
1 x	Threaded coupler ALU M2 Ø 3 (2 uds)
1 x	Horn with ball 40x30
1 x	Horn 5/15 with M2 Bearing
1 x	Threaded coupler ALU M3 Ø 5 (2 uds)
1 x	Brass control horn M3 short for wire (2 pcs)
1 x	6 mm red aluminium threaded horn with patella
1 x	Cable control set
1 x	Small aluminium horn blue (2pcs)
1 x	Horn 16,5x20 mm (2 pcs)
1 x	Threaded coupler ALU M2,5 Ø 4 (2 uds)
1 x	SlowFlyer control horn (3 pcs)
2 x	Threaded coupler ALU M3 Ø 4 (2 uds)
1 x	Horn 6/20 with M3 Bearing
1 x	Threaded coupler ALU M3 Ø 6 (2 uds)
1 x	Horn 6/35 with M3 Bearing
1 x	Cap Hispano Aviación
1 x	Vest clothes Hispano Aviación
1 x	Aluminium coupler M3/2 with ball bearing (1 pcs)
1 x	Screwdriver for Torx® TX6
1 x	Ball Link M2 with Ball and Hardware, 10 pcs
1 x	Starter Sullivan-STAR 603 DINATRON
1 x	Brass ball links BS M3 V1 (10 pcs)
1 x	Vacuum pump 12 CFM
1 x
1 x	Disposable Injector Bags (30x16cm) 100 pcs
1 x	PROXXON - SILICON CARBIDE BELTS FOR BSL 220/E
1 x	Z type of cable coupler Ø 2 (2 uds)
1 x	Ball link V1 Ø7 M4/3 (6 uds)
1 x	Threaded coupler M3 (10 uds)
1 x	Aluminium red ball links M3 V1 (10 pcs)
1 x	Aluminium coupler M2,5/2 with ball bearing (1 pcs)
1 x	Ball Link ALU M3 - RH (1 pcs)
1 x	Angled clevis with threaded rod M3
1 x	Z type of cable coupler Ø 1 (2 uds)
1 x	Copier 5x20 cm pcs
1 x	Kwik link AL M3 con Clip (2 pcs)
1 x	Screwdriver for Hexagon 1,5mm
1 x	Clevis plastico I=44 mm / hole 3mm / pin 2 (2 pcs)
1 x	Vacuum pump P1-N
1 x	Threaded coupler M2,5 Ø 3 mm (10 pcs)
1 x	Threaded coupler ALU M2,5 Ø 3 (2 uds)
1 x	Starter 12v (Max 90 and 15ccm)
1 x	PROXXON - SANDING BELTS FOR BSL 220/E 80 GRIT (5 pcs)
1 x	Threaded coupler M2,5 Ø 2 mm (10 pcs)
1 x	Threaded coupler ALU M2,5 Ø 6 (2 uds)
1 x	Dust collector for mould cleaning
1 x	Xplorer4 anemometro
1 x	Cut tube
1 x	Crimping tool
1 x	Threaded coupler Micro M2 Ø 0,8 (10 pcs)
1 x	Crimping tool
1 x	Starter EM Gear Power 80
1 x	Hot Glue Stick BLACK
1 x	Hot Glue Stick GREEN
1 x	2,0x50 mm allen screwdriver
1 x	PROXXON - SANDING BELTS FOR BSL 220/E 180 GRIT (5 pcs)
1 x	Threaded coupler M2 (10 uds)
1 x	Aluminium coupler M2/2 with ball bearing (1 pcs)
1 x	Xplorer2 anemometro
1 x	Starter 12v (Max 180 and 30ccm)
1 x	Kwik link AL M3 L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x	3,0x60 mm allen screwdriver
1 x	Z Bender - S Type Tool
1 x	Monokote PLATINO metalizado (1.8x0.65m)
1 x	Socket head long ball link M3 (2 uds)
1 x	Ball link M3 (10 pcs, flat ball)
1 x	Round Rod 2,5x1000 mm
1 x	Conector JR Servo female (10 pcs)
1 x	Connectors banna oro 8,0 mm (Male) 5 pcs.
1 x	XH LiPo extension lead
1 x	XH female balance (5S) connector (2 pcs)
1 x	Soporte carbono MR30 (2 pcs)
1 x	Connectors MPX black female
1 x	Bag connector 2 mm
1 x	XH male balance (4S) connector (2 pcs)
1 x	Connectors MPX male
1 x	Propeller mounting nuts Black / Silver Rocket 400 or Phatom simi
1 x	Support Flush MPX Conector (6 pcs)
1 x	Breatex™ Non-woven absorber 150 g/m² Roll 100m
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m
1 x	Tapa estado carga XT-60 (6 pcs)
1 x	Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m
1 x	Carbon fiber rod 2.0 mmx1000 mm
1 x	Support FUEL DOT V3
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs)
1 x	Motor Eachine Racer 250 Brushless Motor - BG2204 2300kv - CW thr
1 x	Soporte grifo FESTO (2 pcs)
1 x	T-Motor U7-V2.0 Kv420
1 x	Buy Perforated film 145 cm / 50 m
1 x	Carbon fabric 245 g/m² (twill weave) 127 cm, roll/ 10 m
1 x	Support conector MPX (6 pcs)
1 x	Buy Perforated film 100 cm / 50 m
1 x	Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m
1 x	Aro pasacable Ø25 mm (4 pcs)

5,289.10EUR