Top » Catalog » R1501032

4.50EUR

CA Glue fast 20g
[R1501032]


CA Glue fast 20g
Superglue (fast) is a normal type Cyanoacrylate adhesive with fast setting, high flow abilit, and good penetration characteristics.

It has been specially formulated to achieve the strongest possible bond between well-mated, non-porous surfaces, such as rubber, metals, plastics, glass, etc.

Single-component
Transparent
Very low viscosity, high setting speed
Bonds obtain hand strength after 2-15 seconds
Special bottle*
*A metal needle is fitted in the lid, which is pressed into the opening of the bottle's dosing attachment when it is screwed on. This reliably prevents leakage, drying out and sticking of the opening. The dosing attachment allows a fine dosing of the adhesive.

Physical properties
Liquid state
Base Ethyl Cyanoacrylat
Colour clear
Specific Gravity (at 20 °C) 1.053~1.060
Refraction Index (n 20 D) 1.439
Flash Point (°C) >80 °C
Boiling Point (°C) 65/6mm Hg
Viscosity (cP) 3-5
Cured state
Colour clear
Specific Gravity (at 20 °C) 1.1~1.3
Processing temperature -55 - 80 °C
Refraction Index (n 20 D) 1.49
Dielectric Constant (bei 10 MHz) 3.5
Dielectric Loss (bei 10 MHz) 0.067
Soluble in Acetone, Dimethyl formamide,Nitromethame and Dimethyl sulfoxide.
Bond strength (Tensile shear strength, cured for 24 hours at 20-25 °C)
kg/cm²
Rigid PVC to rigid PVC 40-60
ABS to ABS 50-70
Polycarbonate to polycarbonate 80-120
Polystyrene to polystyrene 30-45
Natural rubber to natural rubber 5-9
Steel to steel 190-210
Stainless steel to stainless steel 200-220
Aluminum to aluminum 160-180
Copper to copper 150-170
Steel to rigid PVC 50-60
Stainless steel to neoprene 5-10
SBR to SBR 5-10
Cure speed
Seconds
ABS to ABS 4-5
Wood to wood 50-60
ABS to stainless steel 5-10
NBR to stainless steel 3-5
NBR to NBR 3-5
Stainless steel to stainless steel 3-5
ABS to NBR 3-5
Wood to ABS 5-10
Storage and shelf life:
Our superglue can be stored in a cool and dark place for about 1 year (for example in the refrigerator at + 5 °C).
At room temperature about 6 months. At temperatures above 20 °C the shelf life is further reduced (e. g. in the summer months)


temporarily out of stock
temporarily out of stock

Reviews

Customers who bought this product also purchased
Propeller MENZ-S 23x8
Propeller MENZ-S 23x8

temporarily out of stock
temporarily out of stock

Sparkplug NGK CM6
Sparkplug NGK CM6

temporarily out of stock
temporarily out of stock

TYGON tubo 1 m Diam. 3.4 x 2.0  mm
TYGON tubo 1 m Diam. 3.4 x 2.0 mm

temporarily out of stock
temporarily out of stock

Tygon tube 6.35 - 3.18 mm 1m
Tygon tube 6.35 - 3.18 mm 1m

temporarily out of stock
temporarily out of stock

Cyano SUPER - GOLD™ THIN (12g)
Cyano SUPER - GOLD™ THIN (12g)

temporarily out of stock
temporarily out of stock

CA Glue (medium) 20g
CA Glue (medium) 20g

temporarily out of stock
temporarily out of stock

We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x ABS tube 8.0x7.0x1000 mm
1 x ABS tube 9.0x7.0x1000 mm
1 x Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm)
1 x CF tube set (Ø 38 mm y Ø 14 mm)
1 x CF tube (L 1000 mm Ø0,7 mm, Ø0,3 mm)
1 x Steel tube (L 1000 mm Ø10 mm, Ø9,7 mm)
1 x Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm)
1 x ABS tube 16.0x14.0x1000 mm
2 x ABS tube 5.0x4.0x1000 mm
1 x ABS tube 4.0x3.0x1000 mm
1 x ABS tube 3.0x2.0x1000 mm
1 x Steel tube (L 1000 mm Ø4 mm, Ø3,7 mm)
1 x ABS tube 4.0x2.0x1000 mm
1 x ABS tube 12.0x10.0x1000 mm
1 x Steel tube (L 1000 mm Ø5 mm, Ø4,7 mm)
1 x ABS tube 3.0x2.0x330 mm
1 x ABS tube 7.0x6.0x1000 mm
2 x Steel tube (L 1000 mm Ø9 mm, Ø8,7 mm)
1 x ABS tube 2.0x1.0x1000 mm
1 x ABS tube 6.0x5.0x1000 mm
1 x 
1 x Premium servo extension 100cm
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs)
1 x Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M
1 x Circlick securite
1 x Cabel "Y" 30 cm (Futaba)
1 x Surface Indicator Gauge Small
1 x Prolongador S-Bus JR/JR 20cm
1 x Carbon fibre tape 200 g/m² (unidirectional) 50 mm
1 x Foaming agent for epoxy resins 200 g
1 x Premium servo extension 75cm
1 x Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll
1 x Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 100M
1 x Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m
1 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m
1 x Cable silicona macho batt. receptor 30 cm (Graupner)
1 x Extension silicon 30 cm male (Graupner)
1 x Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m
1 x Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm
1 x Propeller balancer
1 x servo adapter lead, JST-SH socket - JR male Pin, for GR-12SH+HoT
1 x Propeller balancer
1 x CA Glue fast 20g
1 x Vacuum bag, 1200 mm x 50 m
1 x Extension 90 cm (Futaba)
2 x Premium servo extension 50cm
1 x Prolongador S-Bus JR/JR 10cm
1 x Extension 30 cm (Futaba)
1 x Angle measurer
1 x Hardener Aero EPH 161 (500 g)
1 x 0,14 mm PVC servo wire extension, ZH micro conector.
1 x Cable S.BUS 3 salidas 300 mm
1 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m
1 x Futaba Female 40 cm extension
1 x Extension 100 cm (Futaba)
1 x Extension silicon 10 cm (Graupner)
1 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m
1 x PARTALL® Hi-Temp Wax, 340 g
1 x Extension PVC 150 cm (Graupner)
1 x Release wax 250ml
1 x CA Glue (medium) 20g
1 x Futaba Female 40 cm extension
1 x Extension silicon 10 cm (Futaba)
1 x Extension 15 cm (Futaba)
1 x Extension 7.5 cm
1 x 200 mm extensión servo HITEC/JR
1 x Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm
1 x Cyanocrylate MD GA460 odourless 20g
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs)
1 x Extension silicon 30 cm male (Futaba)
1 x silicon 100 cm Futaba Extension Ø 0,35 mm
1 x ARAMID honeycomb 1300x2600x2 mm
1 x Extension S-Bus 1-2 silicon 120 cm FUTABA
1 x Steering arm 12 mm Ø 4 mm
1 x Stainless steel cable Ø 1.3 mm (10 m)
1 x Cierre cabina aluminio Ø5, I=16 mm
1 x Aluminium alloy coupler for carbon tube 6/M4
1 x Crimping sleeves for cable 1.3 mm (10 pcs)
1 x Covered closure or fairings
1 x Locking cable tie 2.5x100 (uds)
1 x Canopy Lock V1 M3 Red (2 pcs)
1 x Cabin latch Fox MDM1 4m (pair)
1 x Micro screw-lock pushrod conn snap Ø 1 mm (2 uds)
1 x Cockpit plastic closing
1 x Vertical cockpit anchor "tipe F3A" (2 pcs)
1 x Steering arm 16 mm Ø 3 mm
1 x Crimping sleeves for cable 0.85 mm (10 pcs)
1 x L cockpit anchor "tipe F3A" (2 pcs)
1 x Horizontal cockpit anchor "tipe F3A" (2 pcs)
2 x Stainless steel cable Ø 0.88 mm - 60 kp (10 m)
1 x One touch canopy lock
1 x Electric spoiler 250 mm (2 pcs)
1 x Steering arm 16 mm Ø 4 mm (2 uds)
1 x LOWER TOW HOOK
1 x Aluminium cap bolt washer M4 red (8 pcs)
1 x Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
1 x M3 Maxi ball link (2 uds)
1 x Carbon tube 3K-PW (L 2000 mm, Ø25 mm, Ø22.5 mm)
1 x Carbon/kevlar tube 3K-PW (L 1500 mm, Ø25 mm, Ø22.5 mm)
2 x Hard brass tubing (L 1000 mm, Ø6.0 mm, Ø5.2 mm)
1 x Carbon tube 3K-PW (L 1000 mm, Ø30 mm, Ø27 mm)
1 x Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø37 mm)
1 x Thinwall Stainless Steel Tubing 28x0.6x1000 mm
1 x Carbon tube 3K-PW (L 1000 mm, Ø25 mm, Ø22.5 mm)
1 x Carbon tube (L 1000 mm, Ø16 mm, Ø14 mm)
1 x Fiberglass tube 6/4x1000mm
2 x Glass fabric tape 225 g/m² (Silane, plain) 40 mm
1 x Extension silicon 100 cm (Futaba)
1 x Glass fabric tape 49 g/m² (Interglas 02037, finish FE 600/800, p
1 x Aluminun wheel collar 4 mm Ø (4 uds)
1 x 41x5,5 mm wires output (2 pcs)
1 x Wing bolts M3 Steel screw blue (2 pcs)
1 x Servo BLUE Bird BLS-H71B v2
1 x 50 mm servo arm with bearing (2 pcs)
1 x ABS tube 7.0x5.0x1000 mm
1 x Servo inverter
1 x Professional Servo tester
1 x Servo Tester
1 x ABS tube 8.0x6.0x1000 mm
1 x Steel tube (L 1000 mm Ø3 mm, Ø2,7 mm)
1 x Gear for D 200 BX
1 x Hardener Aero EPH 161 (250 g)
2 x Hardener P-25, canister 2.5Kg
1 x Epoxy Resin L + Hardener CL (60 min) kit/ 930 g
1 x Epoxy Resin L (2.5 Kg)
1 x Epoxy Resin HT 2 + Hardener HT 2 (60 min) 1 kg
1 x Connector Sub-D 2+5 Female
1 x Fiberglass plate 620x540x2,0 mm
1 x wing/fuselage connector for 6 pines AWG 20-24 (without pines)
1 x Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm
1 x DPS Switch JR/JR
1 x Fiberglass plate 350x150x3.0 mm
1 x Fiberglass plate 350x150x0.3 mm
1 x PVC plate 320 x 194 x 0.23 mm (brown)
1 x BALSA trip 5.0x5.0x1000 mm
1 x Pine wood slat 3.0x5.0x1000 mm
1 x Linden wood slat 3.0x3.0x1000 mm
1 x BALSA trip 10x10x1000 mm
1 x BALSA trip 3.0x5.0x1000 mm
1 x Oracover Black 10 m
1 x Epoxy Resin L 285 + Hardener 386, kit/ 3.355 kg
1 x resin-hardener package L-385 with hardener H-385
1 x Premium servo extension 25cm
1 x resin-hardener L-385 H-385 (625 g)
1 x Glass fabric 49 g/m² (1,27 x 5 m)
1 x Glass fabric 49 g/m² (Finish FE 800, plain) 110 cm x 20m
1 x Glass fabric 49 g/m² (1,27 x 10 m)
1 x resin-hardener package L-385 with hardener H-385 (875 g)
1 x Carbon Non-Woven, 160 g/m² 100 cm 5m
4,581.30EUR
Manufacturers
Manufacturer Info
R-G.de
R-G.de Homepage
Other products
Languages
Español English
Currencies