Top » Catalog » Planes » Gasoline-Glow » Acrobatics » PILOTPITTS8702

1,559.99EUR

PITTS CHALLENGER 87″ 2.20m (120cc) 02 ARF
[PILOTPITTS8702]

Pilot-RC’s first ever biplane! And it could be no other than the classically beautiful Pitts Challenger.
Fear not about long setup times of traditional biplanes, Pilot-RC’s innovative and patented systems allow you to have the model completely put together in under 5 minutes, to then unleash the acrobatic and 3D monster that our Pitts.

FEATURES:
NEW! Pilot-RC’s first ever biplane! Years of experience poured into a new design SPECIAL NEW! Pilot-RC new and patented quick release system for fast wing mounting at the field.
Special Pilot-RC no screw canopy. Quick release with new security latch design.
Strong but light, specially developed for precision acrobatic and extreme 3D flying
Genuine German Oracover (Ultracote) covering
Highly prefabricated, experienced builders can have air ready in under a day
Pre-installed hinges (glued and pinned)
Internally mounted cowling – so no external screws exposed
Removable wings , wing stut and stabs.
Laser engraved motor mounting position

INCLUDED HARDWARE:
Complete air frame with all basic accessories (such as carbon fiber main undercarriage, tail-gear assembly and wing-tubes as well as fibreglass control horns and wheel pants)
Pre-installed hinges and pre-mounted canopy
Fuel tank and fuel tubing pre-prepared, fuel dot and breather valve
Wheels, axels and wheel pants
Pre-prepared pushrods with ball links
Matching carbon spinner

REQUIRED HARDWARE
Motor: 100-120cc
Servos: 7-8 high torque plus throttle // Uses x1 per aileron (total x4), x1 per elevator and x1 or x2 on rudder
Also requires all the usual accessories such as transmitter, receiver, batteries, powerbox and possibly other small accessories…

SPECIFICATIONS:
Model: Pitts Challenger
Wingspan: 87″ (2,200mm)
Length: 79″ (2,000mm)
Wing area: 2,265 “² (1,465 cm²)
Weight: 29.4lbs (13.4kg)

under request

Reviews

Quick Find

Shopping Cart

1 x	Motor A2212/13T
2 x	Rescue 1,8m2 / BackPack
1 x	Turbina KINGTECH K320 G5
1 x	Parachute BACKUP X100
1 x	Trike XL motor set (motor+esc+prop)
1 x	Set cintas unión paracaídas 145 cm
1 x	MAX pilot ARTF
1 x	Windsock Ozone L -1200 mm
1 x	Windsock Ozone L - 700 mm
1 x	Opale Rucksack
1 x	Para-RC Mix
1 x	Para-RC "RC-Evo-Cross" Rescue
1 x	Para-RC Trike "RC-Bullix"
1 x	Servo GO-1035MG 16 kg.cm 0.08s/60º
2 x	Starter EM Gear Power 80
1 x	Extension MPX-MPX 20 cm
1 x	Paramotor Kit Camo H1.5/ Ben Red
1 x	Parachute P4
1 x	LUCAS pilot ARTF
1 x	Cylidric hinge 43 mm Ø 2,5 mm (5 pcs)
1 x	18 mm reinforced hinge
1 x	Pin type hinge Al 3,0x50 mm demount (2 pcs)
1 x	Interface Jack Adapter IKARUS
1 x	Slave-cable USB Easy Sim
1 x	Cylidric hinge 33 mm Ø 2 mm (5 pcs)
1 x	33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x	Pin type hinge Al 3,0x50 mm (2 pcs)
1 x	67 mm cylidric hinge Ø 4,5 mm (5 pcs)
1 x	1,5x50 mm allen screwdriver
1 x	Starter Sullivan-STAR 601
1 x	Vacuum Connection VA 1 (for hose Ø 6 mm)
1 x	Crimping tool
1 x	Z Bender - S Type Tool
1 x	Dust collector for mould cleaning
1 x	PROXXON - SILICON CARBIDE BELTS FOR BSL 220/E
1 x
1 x	Cut tube
1 x	Copier 2x20 cm pcs
1 x	Screwdriver for Torx® TX8
1 x	3,0x60 mm allen screwdriver
1 x	Starter 12v (Max 90 and 15ccm)
1 x	Vacuum pump 12 CFM
1 x	PROXXON - SANDING BELTS FOR BSL 220/E 180 GRIT (5 pcs)
1 x	2,0x50 mm allen screwdriver
1 x	Hexagonal ball head 2.0 x 50 mm
1 x	Z Bender - S Type Tool
2 x	Steel tube (L 1000 mm Ø8 mm, Ø7,7 mm)
1 x	ABS tube 6.0x5.0x1000 mm
1 x	Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m
2 x	ABS tube 9.0x7.0x1000 mm
1 x	ABS tube 7.0x5.0x1000 mm
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m
1 x	Glass fabric tape 225 g/m² (Silane, plain) 40 mm
1 x	Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m
2 x	Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m
1 x	Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m
1 x	Steel tube (L 1000 mm Ø3 mm, Ø2,7 mm)
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m
1 x	Steel tube (L 1000 mm Ø6 mm, Ø5,7 mm)
2 x	ABS tube 5.0x3.0x1000 mm
1 x	Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m
2 x	Carbon roving DowAksa / 24k / 1600 tex
2 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs)
1 x	Thinwall Stainless Steel Tubing 28x0.6x1000 mm
1 x	CF tube (L 1000 mm Ø0,7 mm, Ø0,3 mm)
2 x	Carbon Non-Woven, 160 g/m² 127 cm 5m
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m
1 x	ABS tube 9.0x8.0x1000 mm
1 x	Carbon Non-Woven, 160 g/m² 100 cm 25 m
1 x	ABS tube 10.0x8.0x1000 mm
1 x	Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm)
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs)
1 x	Steel tube (L 1000 mm Ø9 mm, Ø8,7 mm)
1 x	Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 100M
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs)
2 x	Glass fabric tape 225 g/m² (Silane, plain) 40 mm X 100m
1 x	Steel tube (L 1000 mm Ø7 mm, Ø6,7 mm)
1 x	Vacuum bag, 1200 mm x 50 m
1 x	CF tube set (Ø 38 mm y Ø 14 mm)
1 x	ABS tube 3.0x2.0x330 mm
1 x	Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm)
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs)
1 x	Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm)
1 x	ABS tube 4.0x2.0x1000 mm
1 x	ABS tube 16.0x14.0x1000 mm
1 x	Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll
1 x	Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m
2 x	Demoulding wedge red (40 x 20 mm) 5 pcs
1 x	ABS tube 14.0x10.0x1000 mm
1 x	Carbon Non-Woven, 160 g/m² 127 cm 1 m
1 x	Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna
1 x	Oracover Orange 2 m
1 x	Spray YELLOW Inca Lexan 150ml
1 x	Silicone 0,35 qmm servos wire Graupner(100 m)
1 x	Xplorer3 anemometro
1 x	Xplorer4 anemometro
1 x	Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs)
1 x	SE Ring 200 mm (2 pcs)
1 x	RH long aluminium horn (2pcs)
1 x	Futaba External voltage input cable Futaba CA-RVIN-700
1 x	Softshell Hispano Aviación
1 x	Aluminium wide washer M4 Blue (4 pcs)
1 x	Oracover Black 10 m
1 x	Wing Joiner ULTIMATUM 2.0 m
1 x	Prop Holder AXI 41xx V2
1 x	Aluminium red ball links M3 V1 (10 pcs)
1 x	45 mm gas motor standoff
1 x	Aluminium wide washer M3 gold (4 pcs)
1 x	15 mm gas motor standoff
1 x	Blind nut M4 (10 pcs)
1 x	Sandwich carbon + poplar 3mm + carbon 480x290 mm
1 x	Sandwich carbon + poplar 4mm + carbon 290x160 mm
1 x	10 mm floating pad (72 pcs)
1 x	Oracover light Grey 2m
1 x	Aluminium ignition bad (blue)
1 x	Sandwich carbon + poplar 4mm + carbon 480x290 mm
1 x	Propeller APC 14x8.5 Electric Pusher
1 x	10 mm gas motor standoff
1 x	Aluminium wide washer M4 Gold (4 pcs)
1 x
1 x	USB Adaptor OPTronics
1 x	Long pinned hinge (6 uds)
1 x	Nylon hinge 20x15x0,3 (10 pcs)
1 x	Paramotor BackPack XXS 2
1 x	Sun Cover ULTIMATUM 2.0 (Hispano Aviacion)
1 x	ABS 500 x 400 x 1,5 mm (white)
1 x	Parachute PV6 for F3J
1 x	76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x	Sun Cover BULL Mo1 2.6 (Hispano Aviacion)
1 x	Nylon hinge for flaps/gates 27x10,5 (2 pcs)
1 x	15 mm reinforced hinge
1 x	Miniature brass strap hinge, 1 m
1 x	Glider retract undercarriage 8-16 Kg 2.5-3.2(without wheel) 140m
1 x	Gates hinge black 30x16 mm (2 pcs)
1 x	Small flex hinge (12 uds)
1 x	Tailwheel for F3A size
1 x	Robart Door Hinge (Pk2)
1 x	Tail wheel for 5-8 kg models
1 x	Manometer 4 mm
1 x	Tren de cola carbono 50-70cc
1 x	Tail wheel for 8-12 kg models
1 x	Hose connector stopper 4 mm
1 x	Servo KST A08H V6.0 3,2Kg HV
1 x	Servo KST X06H - 1.8Kg.cm 7mm 6g
1 x	Servo KST X20 8.4-50 V8.0 45kg 8.4v Softstar
1 x	Servo KST BLS825 V8.0 HV 35Kg 8.4v
1 x	Servo KST BLS815 HV V2.0 Servo 20mm 70g 20Kg
1 x	Smart Soldering Iron 110W/230V AC
1 x	Servo KST A15-1810 20kg/cm@8.4V / Coreless Motor
1 x	Servo KST X10-710 V8.0 7.5Kg HV
1 x	Servo KST X10 MINI wing 10mm 23g 7.5Kg
1 x	Brazo servo aluminio KST 25T-5V2,3515,325,125,135,145X10,X12,A13
1 x	EC-Cutter
1 x	Tachometer HANGAR 9 digital
1 x	Fabric scissors curved Premium, 16 cm / 6" length
1 x	Welder 100W/200V
1 x	25 mm Sandpaper file
1 x	Tachometer Hyperion Multi-pala
1 x	Buy Perforated film 100 cm / 20 m
1 x	Set fresas corte acero-carburo Ø 1.8/2.3 mm (2 pcs)
1 x	Steel tube (L 1000 mm Ø10 mm, Ø9,7 mm)
1 x	Fiberglass 163 g/m² 1m x 20 m (Aero, finish FK 144, plain)
1 x	ARAMID honeycomb 1300x2600x2 mm
1 x	Modelling compound (Plastilin), sculptor's quality 1 Kg
1 x	Glass fibre sleeve Ø 20 mm X 10m
1 x	Carbon fibre tape 200 g/m² (unidirectional) 50 mm
1 x	Peel ply 64 g/m² (plain weave) 150 cm x 10m
1 x	Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m
1 x	Glass fabric 160 g/m² (Twill weave) 100 cm x 20m
1 x	Propeller diller for EME35 and DLE35
1 x	ABS tube 20.0x18.0x1000 mm
1 x	Glass fabric 49 g/m² (1,27 x 5 m)
1 x	Glass fabric 49 g/m² (Finish FE 800, plain) 110 cm x 3m
1 x	ABS 500 x 400 x 1 mm (white)
1 x	Chopped glass fibre strands 3 mm
1 x	Junta selladora, Tacky Tape Gris 2.75mmx12mmx15m
1 x	Propeller APC 12x6 SF
1 x	Propeller APC 10x4.7
1 x	Propeller APC 10x4.7 SF Pusher
1 x	19.5x13 Falcon electric 3-Blade carbon prop (54 g)
1 x	ARS 300 91" ARF 2311mm ORANGE
1 x	EDGE 540-A 74" (1880 mm)
1 x	PITTS CHALLENGER 87″ 2.20m (120cc) 02 ARF
1 x	T- Fittings red color (2pcs)
1 x	A/C quality beech plywood 600x300x6.0 mm
1 x	Propeller APC 12x6 Electric Pusher
1 x	Propeller APC 10x5.5 MR Electric multirrotor
1 x	Propeller APC 13x4 Electric
1 x	Propeller APC 11x8 Electric
1 x	Propeller APC 12x3.8 SF
1 x	Propeller APC 12x6 Electric
1 x	Propeller APC 11x8.5 Electric
1 x	Propeller APC 13x4 Electric Pusher
1 x	Propeller APC 10x5 Electric Pusher
1 x	Propeller APC 12x8 SF
1 x	Propeller APC 10x7 SF
1 x	Propeller APC 10x3,8 SF
1 x	Propeller APC 11x4.5 Electric Pusher
1 x	Propeller APC 10x5 Electric
1 x	Propeller APC 11x4.7 SF Pusher
1 x	Propeller APC 11x7 SF
1 x	Propeller APC 11x4.7 SF
1 x	Propeller APC 10x6 Electric
1 x	Propeller APC 12x8 Electric
1 x	Propeller 12x6 Falcon electric
1 x	21x14 Falcon electric carbon prop (64 g)
1 x	PITTS CHALLENGER 87″ 2.20m (120cc) 03 ARF
1 x	Sebart 2.2 m YELLOW/BLACK (SebART)
1 x	SLICK 103" Red/Yellow/Black ARF (Color 2) 2630 mm
1 x	SLICK 360-A 104" (2640 mm)
1 x	EDGE 540-A 105" (2660 mm)

26,697.27EUR