Top » Catalog » Planes » Gasoline-Glow » 3D » PILOTSLI103C02

1,450.00EUR

SLICK 103" Yellow/Blue ARF (Color 2) 2630 mm
[PILOTSLI103C02]

Pilot-RC Slick 103 ” (2,63 m) - color scheme 02 (Yellow/Blue)

Pilot-RC already surprised everyone with a new level of precision and agility with our extremely popular Laser. We have now taken all these great features and grown them into our new Slick.
The Pilot-RC Slick, as well as looking great and offering color schemes designed by legendary Italian designer Mirco Pecorari at Aircraft Studio Design, it once again flys as good as it looks, and that is really saying something!
All the crazy agility and manoeuvrability of the Laser, while keeping the friendly flying characteristics of Pilot-RC planes, the new Slick offers an even further improvement in precision and aero musical performance, feeling like a larger plane, a larger plane that can go nuts!
At Aerobertics we are Pilot-RC dealer for many years and we try to keep as many planes in stock as possible. Together with our team full of experienced modellers, we can give you the right advise & service for your Pilot-RC plane. Also, we try to keep a lot of spare parts in stock, however if you are looking for something you can’t find on the website yet, feel free to contact us.

Required hardware:
Motor: 80-120cc or equivalent electric
Servos: 7-8 high torque (minimum 20kg) plus throttle // Uses x2 per aileron, x1 per elevator and x1 or x2 on rudder
Also requires all the usual accessories such as transmitter, receiver, propeller, batteries, powerbox, extension leads and possibly other small accessories.<
br> FEATURES
NEW! Hybrid construction from wood and composite materials for specially reinforced fuselage and wings.
NEW! Patented quick assembly system for wings, stabilizer and SFG
NEW! Patented quick assembly system for canopy.
Genuine German Oracover (Ultracote) covering
Highly prefabricated, experienced builders can have air ready in under a day
Pre-installed hinges (glued and pinned)
Internally mounted cowling – so no visible external screws exposed (two exposed screws underneath for easy mounting)
Removable wings and stabs
Laser engraved motor mounting position
Easy canister installation due to open construction
Pull push system for Rudder servo

Model: Slick – 103″
Wingspan: 103.8″ (2.638mm)
Length: 96.6″ (2.454mm)
Wing area: 1,863 “² (12,020 cm²)
Weight: 26.95lbs (12.2kg)

under request

Reviews

Quick Find

Shopping Cart

1 x	Starter EM Gear Power 80
1 x	Conector MR-60 (pareja)
1 x	Servo GO-1035MG 16 kg.cm 0.08s/60º
1 x	Crimping tool
2 x	Adaptadores carga 6s JST-XH
1 x	EXTRA NG 74" white/red/blue (Skywing RC)
2 x	Electric Landing Gear "Black Edition" ULTIMATUM 3.0 (Elektron Re
1 x	Turbina KINGTECH K320 G5
1 x	Banna gold connector 2,5 mm (M/F)
1 x	Connectors banna oro 4 mm (M/F) (ultralight)
1 x	Conector AS150 7mm antichispazo (Set: 2 pares)
1 x	Jeti Black cap
1 x	Conector Servo female 4 pines
2 x	EC5-Set male, simple quality, 2 x female pin, 1 x blue housing
1 x	2 mm male connector (2 pcs) with safety connector
2 x	Wing connector 8pin with pin strip, plug & socket
1 x	30 cm DEANS female connector
1 x	Connectors banna oro 3,5 mm (M/F)
1 x	XH male balance (2S) connector (2 pcs)
1 x	XH male balance (4S) connector (2 pcs)
1 x	Connectors banna oro 8,0 mm (Male) 5 pcs.
1 x	Connectors banna oro 8,0 mm (M/F)
1 x	XH female balance (4S) connector (2 pcs)
2 x	Connectors DEANS 4 pins (1 pair)
1 x	Connectors banna oro 4 mm (M/F)
1 x	XH female balance (2S) connector (2 pcs)
1 x	Big-Malibu XL Roof box with surfboard rack GREY
1 x	SE Ring 200 mm (2 pcs)
1 x	Balsa panel 1.0x100x1000 mm
1 x	Balsa panel 10x100x1000 mm
1 x
1 x	BALSA triangular 15x15x1000 mm
1 x	SE Ring 350 mm (2 pcs)
1 x	BALSA trip 3.0x3.0x1000 mm
2 x	Tape GFK 25 mm
1 x	Balsa panel 6.0x100x1000 mm
1 x	A/C quality beech plywood 600x300x6.0 mm
2 x	BALSA trip 2.0x10.0x1000 mm
1 x	10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	BALSA trip 3.0x5.0x1000 mm
1 x	Balsa panel 2.0x100x1000 mm
1 x	BALSA triangular 6x6x1000 mm
2 x	20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
3 x	Spikes Band (5 m)
1 x	20x1000 mm Ring Strap Back To Back
1 x	A/C quality beech plywood 600x300x8.0 mm
3 x	Beech dowels 2.0 x 1000 mm
1 x	A/C quality beech plywood 600x300x0.6 mm
1 x	SE Ring HACKER 300 mm (2 pcs)
1 x	A/C quality beech plywood 600x300x1.5 mm
1 x	A/C quality beech plywood 1520x750x4.0 mm
2 x	5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	Balsa panel 4.0x100x1000 mm
1 x	SE Ring 300 mm (2 pcs)
1 x	14x60 mm Mini rings Tie Wraps (4 pcs)
1 x	13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	A/C quality beech plywood 600x300x5.0 mm
2 x	RUDDOG Protection and Heat Shield Tape (2mx50mm)
1 x	BALSA trip 6.0x6.0x1000 mm
1 x	SE Ring 240 mm (2 pcs)
1 x	SE Ring 360 mm (2 pcs)
1 x	BALSA trip 2.0x2.0x1000 mm
1 x	Balsa panel 8.0x100x1000 mm
1 x	Balsa panel 3.0x100x1000 mm
1 x	13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
2 x	BALSA trip 5.0x5.0x1000 mm
1 x	20x200 mm battery rings
2 x	SE Ring 400 mm (2 pcs)
2 x	BALSA leading edge 8x10x1000 mm
2 x	BALSA triangular 8x8x1000 mm
1 x	BALSA trip 10x10x1000 mm
1 x	A/C economy plywood 600x300x6+.0 mm
1 x	A/C quality beech plywood BIRCH 600x300x1.0 mm
1 x	26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	SE Ring 330 mm (4 pcs)
1 x	Red smoke bombs AX-60 (5 pcs)
1 x	Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm)
1 x	ABS angle 2,0x2,0x1000 mm
1 x	ABS angle 10,0x10,0x1000 mm
1 x	A/C quality beech plywood 600x300x6.0 mm
1 x	Fibra de vidrio 80 g/m² (2 m x 100 cm)
1 x	Prop Holder AXI 41xx V2
1 x	Servo Connector Brackets (10 pcs)
2 x	Connectors MPX black female
3 x	Soldering PCBs 8pin, 5 pieces
1 x	XH female balance (9S) connector (2 pcs)
1 x	XH female balance (7S) connector (2 pcs)
1 x	Contacto macho pin conector (10 pcs)
1 x	Gold antispark 4 mm plug
1 x	MPX PCB "Gender-Changer (5 pcs)
1 x	XH female balance (6S) connector (2 pcs)
2 x	MPX Sub-D Adaptor
1 x	Connectors MPX 8 pins (green) 1 pair (male-female)
1 x	Mounting frame MPX male connector
1 x	MPX PCB "4 Pins", 5 pieces
1 x	Connectors MPX male
1 x	MPX screwable clips (5 pcs)
1 x	XH female balance (3S) connector (2 pcs)
1 x	Optotronix Aurora Plug
1 x	Magnetic Connect locking system
1 x	XH male balance (9S) connector (2 pcs)
1 x	MPX Support
1 x	MR30 connector male
2 x	MPX screwable clips (4 pcs)
1 x	Wing conexion 2 servos Futaba 50 cm
1 x	Brass rod Ø 1.0 mm x 1000 mm
1 x	Brass hexagonal rod Ø 5 mm x 1000 mm
1 x	Straightened rod Ø 2.5 mm x 1000 mm
1 x	Straightened rod Ø 5.5 mm x 1000 mm
1 x	Aluminium rod Ø 4.0 mm x 3000 mm
1 x	Straightened rod Ø 3.0 mm x 1000 mm
1 x	Tailwheel for 20/60 size
1 x	Mahogany wood slat 1.5x1.5x1000 mm
1 x	Mahogany wood slat 3.0x3.0x1000 mm
1 x	Pine wood slat 3.0x10.0x1000 mm
1 x	BALSA trip 4.0x4.0x1000 mm
2 x	Pine wood slat 3.0x5.0x1000 mm
1 x	Birch plywood plate 600x300x3.0 mm
1 x	Beech dowels 3.0 x 1000 mm
1 x	SE Ring 450 mm (2 pcs)
3 x	Bidule 111 3000 mm
3 x	Bidule 55 2460 mm Cabina
2 x	Sukhoi 29S 2,2 m V2 YELLOW/BLACK (SebART)
1 x	Straightened rod Ø 14.0 mm x 1000 mm
1 x	Waterproof adhesive tape, width 19mm, length 25m
1 x	Propeller POWER-PROP 14x9 Izda
2 x	SLICK 360-B 104" (2640 mm)
1 x	EXTRA NG 85" 2159mm yellow/blue
1 x	EDGE 540-A 91" (2310 mm)
2 x	Bidule 170 ARF 3.48 m
3 x	Bidule 55 V3 2460 mm
1 x	SKY MASTER 3.000 mm ARF
2 x	Bidule 111 3000 mm Canopy
1 x	Wing Joiner ULTIMATUM 2.0 m
1 x	ARS 300 91" ARF 2311mm ORANGE
2 x	PITTS CHALLENGER 87″ 2.20m (120cc) 03 ARF
1 x	LASER 73" 1.85m (05) PILOT
1 x	Sukhoi 29S 2,2 m V2 CLASSIC BLUE (SebART)
1 x	Gold antispark 5,5 mm plug
1 x	XT60 Connector with Holder Male 2pcs
1 x	Adapter 3,2 mm M8
1 x	F3A carbon 85 mm spinner for Hacker Q-80
1 x	Distanzstück motor OS 120 AX
1 x	2,3 mm Prop Drive Günther M4
1 x	40,0 mm hydro-propeller (left hydropropeller)
1 x	Spinner INO 89 mm Chrome (Imitacion metal)
1 x	MPX housing with flange (4 pcs)
1 x	PIN Connector female (100 pcs)
1 x	Wing conexion 2 servos JR/Graupner 50 cm
1 x	XH LiPo extension lead
1 x	Bag connector 2 mm
1 x	MZ-10, 5 Channel HoTT
1 x	Threaded coupler ALU M2,5 Ø 4 (2 uds)
1 x	Threaded coupler ALU M2 Ø 3 (2 uds)
1 x	Adapter 3,0 mm M5 for spinner 30 mm fixed propeller
1 x	89 mm INO spinner (carbon imitation)
1 x	Couple M4 for wire (10 pcs)
1 x	Spinner fixed propeller 42 mm / 5,0 mm
1 x	Aluminium sheet 500x250x0,5mm
1 x	3 mm Short Prop Adapter M5
1 x	Spinner INO 57 mm Chrome (Imitacion metal)
1 x	Threaded coupler ALU M2 Ø 4 (2 uds)
1 x	Spinner INOVA 102 mm Black
1 x	Spinner Alumin. fixed propeller 45 mm / 6,0 mm
1 x	Actuador lineal HLS12-100210-7.4v
1 x	Tren de cola carbono 50-70cc
2 x	Pine wood slat 3.0x7.0x1000 mm
1 x	SE Ring 480 mm (2 pcs)
1 x	Balsa panel 1.5x100x1000 mm
1 x	DPSI Micro SingleBat 5.9V/7.2V magnetic switch
1 x	DPSI 2001 RV
2 x	Tape GFK 38 mm
1 x	Glases Nimbus "Black"
1 x	Tail wheel for 8-12 kg models
1 x	Tailwheel for 1-3 kg models
1 x	Tail gear set (60-120 class)
1 x	Tailwheel for F3A size
1 x	Tail wheel for 5-8 kg models
2 x	Ring 320 mm length (5 pcs)
1 x	DPSI magnetic switch actuator (PCB)
2 x	Liston HAYA 8 x 8 x 1000 mm
1 x	Tape GFK 50 mm
1 x	DPSI Micro-DualBat 5.9V / 7.2V MPX-JR
1 x	Walnut wood slat 1.5x1.5x1000 mm
1 x	OBECHI sheet 2.0x3.0x1000 mm
1 x	Pad self adhesive, up to 3mm / 0.12″, (10 pcs)
1 x	Beech dowels 10 mm x 1000 mm
1 x	Beech dowels 4.0 x 1000 mm
1 x	DPSI Micro - RCS RV
1 x	Aluminium tube with fibreglass case ø35x1.5mm, 500mm
1 x	Sukhoi 29S 2,6 m Yellow/Black (SebART)
1 x	SAVAGE Max Red 1080 mm
2 x	CARBON CUB 15cc ARF 2280 mm
2 x	PILATUS PC-6 Turbo Porter 33% 5.290 mm
1 x	Servo KST BLS905X HV V2.0 8Kg 20mm
1 x	EXTRA 330SC-E 95" Orange/Blue/White
1 x	EDGE 540-A 74" (1880 mm)

44,958.63EUR