1,450.00EUR

SLICK 103" Red/Yellow/Black ARF (Color 2) 2630 mm
[PILOTSLI103C01]


SLICK 103" Red/Yellow/Black ARF (Color 2) 2630 mm

Pilot-RC already surprised everyone with a new level of precision and agility with our extremely popular Laser. We have now taken all these great features and grown them into our new Slick.
The Pilot-RC Slick, as well as looking great and offering color schemes designed by legendary Italian designer Mirco Pecorari at Aircraft Studio Design, it once again flys as good as it looks, and that is really saying something!
All the crazy agility and manoeuvrability of the Laser, while keeping the friendly flying characteristics of Pilot-RC planes, the new Slick offers an even further improvement in precision and aero musical performance, feeling like a larger plane, a larger plane that can go nuts!
At Aerobertics we are Pilot-RC dealer for many years and we try to keep as many planes in stock as possible. Together with our team full of experienced modellers, we can give you the right advise & service for your Pilot-RC plane. Also, we try to keep a lot of spare parts in stock, however if you are looking for something you can’t find on the website yet, feel free to contact us.

Required hardware:
Motor: 80-120cc or equivalent electric
Servos: 7-8 high torque (minimum 20kg) plus throttle // Uses x2 per aileron, x1 per elevator and x1 or x2 on rudder
Also requires all the usual accessories such as transmitter, receiver, propeller, batteries, powerbox, extension leads and possibly other small accessories.<
br> FEATURES
NEW! Hybrid construction from wood and composite materials for specially reinforced fuselage and wings.
NEW! Patented quick assembly system for wings, stabilizer and SFG
NEW! Patented quick assembly system for canopy.
Genuine German Oracover (Ultracote) covering
Highly prefabricated, experienced builders can have air ready in under a day
Pre-installed hinges (glued and pinned)
Internally mounted cowling – so no visible external screws exposed (two exposed screws underneath for easy mounting)
Removable wings and stabs
Laser engraved motor mounting position
Easy canister installation due to open construction
Pull push system for Rudder servo

Model: Slick – 103″
Wingspan: 103.8″ (2.638mm)
Length: 96.6″ (2.454mm)
Wing area: 1,863 “² (12,020 cm²)
Weight: 26.95lbs (12.2kg)


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
1 x Cabel charger transmitter GRAUPNER
3 x Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
1 x Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH
2 x 3 LiPo XH>EH adapter
1 x Bec MR UBEC 5A (5v/6v/7v)
1 x Red copper lacquer wire Ø0,2 mm (5 m)
1 x CC 05
1 x CM-3
1 x CC 01
1 x 2 LiPo XH>EH adapter
1 x APM2.6 Power module with 5.3V DC BEC
1 x 30 cm BEC cable (male)
1 x Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
1 x CC 03
2 x JETImodel SINGLE BEC
1 x Balanceradapter JST-XH (Heli 47G) 2-6 c.
2 x Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
2 x Dean "T" - Futaba Adapter
1 x "Y" charging 4mm wire (2 IN-1 OUT).
1 x 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x Cinta Goldfix 1m
1 x SE Ring 300 mm (2 pcs)
1 x ABS Strip 1.5x6.0x1000 mm
1 x 20x1000 mm Ring Strap Back To Back
1 x Strip ABS 2.0x10.0x1000 mm
1 x ABS Strip 1.0x4.0x1000 mm
1 x Round Rod 3,0x1000 mm
1 x Round Rod 1,0x1000 mm
2 x ABS Strip 1.5x2.0x1000 mm
1 x Round Rod 2,0x1000 mm
1 x 14x60 mm Mini rings Tie Wraps (4 pcs)
1 x ABS Strip 1.5x8.0x1000 mm
1 x Round Rod 1,5x1000 mm
1 x 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x Strip 2,5x1,25x330 mm
1 x Round Rod 1,25x1000 mm
1 x Strip ABS 2.0x5.0x1000 mm
1 x Round Rod 2,5x1000 mm
2 x SE Ring 360 mm (2 pcs)
1 x SE Ring 400 mm (2 pcs)
2 x Round Rod 6,0x1000 mm
1 x SE Ring 350 mm (2 pcs)
1 x SE Ring 480 mm (2 pcs)
1 x Strip 1,5x1,5x330 mm
1 x Strip 3,5x1,75x330 mm
1 x 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
2 x Round Rod 4,0x1000 mm
1 x SE Ring 200 mm (2 pcs)
1 x Pad self adhesive, up to 3mm / 0.12″, (10 pcs)
1 x RUDDOG Protection and Heat Shield Tape (2mx50mm)
3 x ABS Strip 1.5x3.0x1000 mm
1 x 
1 x SE Ring 330 mm (4 pcs)
1 x SE Ring 240 mm (2 pcs)
1 x ABS Strip 1.0x5.0x1000 mm
1 x Marker ties (20 pcs)
1 x Spikes Band (5 m)
1 x SE Ring HACKER 300 mm (2 pcs)
2 x Round Rod 5,0x1000 mm
1 x Strip 2,0x2,0x330 mm
1 x ABS Strip 1.5x4.0x1000 mm
1 x Horn 6/27 with M3 Bearing
1 x Parachute expulsion foam
1 x Parachutist
1 x Oracover CARBON Metalic 1 m
1 x SPS 70V 140/280 A
1 x 3 copper lacquer wire Ø0,2 mm (1 m)
1 x 5 LiPo XH>EH adapter
1 x DPSI Ampere battery backer
1 x Female prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm
1 x Copper lacquer wire Ø0,2 mm (5 m)
2 x Adapter lead MPX/EC3
1 x Extension 5 lipos JST/C - JST
1 x Female connector JST SH 1.0mm with 10 cm wire
1 x Double conector with JR adapter and 200 mm extension
1 x Prolonguer for Balancer Thunder Power 6S
1 x PWC4 wing/fuselage connector for 4 servos
1 x TP/TopFuel - XH 2/3S Adapter
1 x Servo slow down unit (0,7-14,7 sec )
1 x SPS Remote switch actuator
1 x SPARK Switch 7.4v
1 x Landing gear Rocket 400
1 x Helices DJI Mavic Air 2 STEALTH "Black" (4x Ud)
1 x DUPLEX USBa USB-Adapter for Jeti Duplex Items
1 x Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
1 x Tape GFK 38 mm
1 x Sparkplug 1/4-32 EVO 10GX
1 x GPS Expander Module
1 x Y Cable
1 x Spark motor OS Type F
1 x Sparkplug NGK CM6
1 x Gates hinge
1 x Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs)
1 x Pin type hinge Al 3,0x50 mm demount (2 pcs)
1 x 15 mm reinforced hinge
1 x Nylon hinge for flaps/gates 27x10,5 (2 pcs)
1 x Pin type hinge Al 4,5x70 mm (2 pcs)
1 x Gates hinge 30x16 mm (2 pcs)
1 x Large flex hinge (12 uds)
1 x Nylon hinge 20x15x0,3 (10 pcs)
1 x Pin hinge 34x16 mm (10 uds)
1 x WingFix ULTRA Black Edition
1 x Field folding model stand SebArt
1 x 120x60 mm SLH KOVO wheel
1 x SIMtransmitter 6 Mode 2
1 x 67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x Interface Jack Adapter IKARUS
1 x RF9 Flight Simulator with Spektrum Controller
1 x Propeller balancer
1 x 26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
1 x ABS Strip 1.0x3.0x1000 mm
1 x ABS I Strip 20x10x1000 mm
1 x ABS Strip 1.0x2.0x1000 mm
1 x 20x200 mm battery rings
1 x JETImodel Addcap 1640
1 x Female connector for 20 pines AWG
1 x Male prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm
1 x Extension 2/3 lipos JST - JST/C
1 x Male connector for 10 pines AWG
1 x JETImodel DPS 40
1 x Aluminium Hub for folding Props 37 mm M8 Shaft 5 mm
1 x Bearings for motors hacker A50
1 x EDGE 540-A 105" (2660 mm)
3,294.79EUR
Manufacturers
Manufacturer Info
PILOT RC
Other products
Languages
Español English
Currencies