Top » Catalog » Planes » Gasoline-Glow » Towing machines » TM066170

1,700.00EUR

Bidule 170 ARF 3.48 m
[TM066170]

Bidule 170 ARF 3.48 m

Wing Spam: 3480 mm
Lenght: 2740 mm
Wheight aprox.: 21 kg
Motor: 120/170 cc
Ailerons, Flaps, Rudder, Elevator, Motor, Towwing hook.
11 Servos.
Content of the set

QUICK BUILD KIT SERIES (only 15-20h construction build!)
All built-up plywood and balsa fuselage, covered with Oracover®, with graphics and decals. Pocket for wing joiner installed - Geometry of the airframe already made at the factory. All the blind nuts for landing gear, wings, tail already in place. Painted fiberglass engine cowl.
Painted and tinted PVC canopy, ready to be installed. The canopy frame is made in balsa and comes pre-covered, with its canopy fixings pre-installed. Painted fiberglass main landing gear.
Special front dampened and Steerable-Nose gear, complete with special steering wheel linkage with "Servo-saver".
All-built-up wings (2 parts), covered in Oracover®, ready with graphics. Ailerons and flaps articulated with pin hinges (to be glued). Servo wells prepared.
Carbon tube wing joiner.
All-built-up horizontal and vertical stabiliser covered in Oracover®, with graphics pre-fitted. Elevator and rudder articulated with pin hinges (to be glued).
Hardware (2x1,5l gas tank, 3 wheels, towing hook, metal control horns, wheel axis, pushrods, clevises, screws, etc.).
Detailed step by step illustrated building manual.

under request

Reviews

Customers who bought this product also purchased

entral piece 3Bl 42 mm 0º under request	Spinner 3BL propeller pleg. 42 mm / 6,0 mm under request	Parachute BACKUP X100 under request
AXI 4120/14 V2 under request	Propeller Pleg CAM Carbon 12x8 under request	Turbine CHEETAH 160 SE under request

Quick Find

Shopping Cart

2 x	Truck-trailer for gliders 720 x 239 mm
1 x	Field folding model stand SebArt
2 x	Propeller balancer
1 x	Angle measurer
1 x	Surface Indicator Gauge Small
2 x	Stickers-digit for marking
1 x	Bec MR UBEC 5A (5v/6v/7v)
1 x	JETImodel SINGLE BEC
1 x	CC 02
1 x	Crimping sleeves for cable 0.85 mm (10 pcs)
1 x	TrainerCord (master-learner)
1 x	Steering arm 16 mm Ø 4 mm (2 uds)
2 x	Cap closure 33/23.5mm (2 uds)
1 x	Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x	Electric spoiler 250 mm (2 pcs)
1 x	Red copper lacquer wire Ø0,2 mm (5 m)
1 x	TP/TopFuel - XH 2/3S Adapter
1 x	L cockpit anchor "tipe F3A" (2 pcs)
1 x	2 LiPo XH>EH adapter
1 x	Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
1 x	Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH
1 x	Crimping sleeves for cable 0.70 mm (10 pcs)
1 x	Canopy Latch
1 x	Aluminium alloy coupler for carbon tube 6/M4
1 x	Black copper lacquer wire Ø0,2 mm (5 m)
2 x	CC 03
1 x	CC 05
1 x	Crimping sleeves for cable 1.3 mm (10 pcs)
1 x	4 LiPo XH>EH adapter
1 x	One touch canopy lock
1 x	Steering arm 16 mm Ø 4 mm
2 x	Steering arm 12 mm Ø 4 mm
1 x	"Y" charging 4mm wire (2 IN-1 OUT).
1 x	MPX-Dean "T" Adapter
1 x	Stainless steel cable Ø 0.62 mm (10 m)
1 x	Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
2 x	Steering arm 12 mm Ø 4 mm (2 uds)
1 x	Horizontal cockpit anchor "tipe F3A" (2 pcs)
2 x	Canopy Lock V1 M3 Blue (2 pcs)
1 x	BEC 3A FOXY
1 x	Stainless steel cable Ø 0.52 mm - 15 kp (10 m)
1 x	Cierre cabina aluminio Ø5, I=16 mm
2 x	APM2.6 Power module with 5.3V DC BEC
1 x	Cierre cabina aluminio Ø4, I=10 mm
1 x	Locking cable tie 2.5x100 (uds)
3 x	Stainless steel cable Ø 0.88 mm - 60 kp (10 m)
1 x	Cockpit plastic closing
1 x	Stainless steel cable Ø 0.5 mm (10 m)
1 x	Adapter lead MPX/XT60
1 x	Cabin latch Fox MDM1 4m (pair)
1 x	ABS angle 2,0x2,0x1000 mm
1 x	U Profile ABS 8,0x4,0x1000 mm
1 x	Streamline Stainless Steel Tubing 9.0x5.0x1000 mm
2 x	ABS angle 4,0x4,0x1000 mm
1 x	ABS angle 10,0x10,0x1000 mm
1 x	Streamline Stainless Steel Tubing 10.5x5.7x1000 m
1 x	L-Connector 1.5 mm x 1000 mm
1 x	ABS "T" angle 4.0x4.0x1000 mm
1 x	Cross Connector 4.0 mm x 1000 mm
1 x	Streamline Stainless Steel Tubing 7.5x4.5x1000 mm
1 x	ABS "T" angle 10.0x10.0x1000 mm
2 x	Profile ABS half cane 2.0x1000 mm
2 x	Profile ABS half cane 2.5x1000 mm
1 x	ABS angle 5,0x5,0x1000 mm
1 x	ABS "T" angle 2.0x2.0x1000 mm
1 x	Profile ABS Square 4 x 1000 mm
1 x	Vasa model Catapult
1 x	800TVL CMOS camera for FPV
1 x	Small aluminium horn red (2pcs)
1 x	LH long black aluminium horn L31xH30 (2pcs)
1 x	Horn 5/15 with M2 Bearing
1 x	6 mm aluminium horn with patella
1 x	Threaded coupler ALU M2,5 Ø 4 (2 uds)
1 x	Threaded coupler ALU M3 Ø 4 (2 uds)
1 x	Threaded coupler ALU M2 Ø 3 (2 uds)
1 x	Horn 16,5x20 mm (2 pcs)
1 x	BALSA trip 3.0x3.0x1000 mm
1 x	BALSA trip 4.0x4.0x1000 mm
1 x	Silicone 0,50 qmm servos wire Graupner(100 m)
1 x	Pin type hinge Al 3,0x50 mm (2 pcs)
1 x	Aluminium cap bolt washer M4 red (8 pcs)
1 x	Cap Hispano Aviación
1 x	Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm
1 x	DPS Switch JR/JR
1 x	250 mm / 16 mm Airbrakes
1 x	Allen wheel collar M4x4
1 x	41x5,5 mm wires output (2 pcs)
1 x	Double conector with JR adapter and 200 mm extension
1 x	Connector Sub-D 2+5 Male
1 x	3 LiPo XH>EH adapter
1 x	Cable grommet Ø 5 mm (4 uds)
2 x	Adapter lead MPX/EC3
1 x	UBEC 6A KAVAN
1 x	Fully Threaded Steel Rod M2,0 (2 uds) 250mm
1 x	Fully Threaded Steel Rod M3
1 x	Fully Threaded Steel Rod SUS303 70mm M3 (2 pcs)
1 x	Press fitting for 0,5 diam. steel cable (10 pcs)
1 x	Wing bolts M3 Steel screw Red (2 pcs)
1 x	Control for forward wheel (MINI)
1 x	Cockpit metalic closing
1 x	140 mm rods + T patellas set for direction control
1 x	Window mounting channel 5m
1 x	90 mm rods + T patellas set for direction control
1 x	ABS angle 3,0x3,0x1000 mm
1 x	Profile ABS half cane 7.0x1000 mm
1 x	Rubber profile 10-2 mm 2M
1 x	TS832 to Gopro AV/Power Cable DJI Phantom 2 Compatible
1 x	Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna
1 x	TS832 to Gopro AV/Power Cable
1 x	DJI Mavic Air Fly More Combo
1 x	Vertical cockpit anchor "tipe F3A" (2 pcs)
1 x	Micro screw-lock pushrod conn snap Ø 1 mm (2 uds)
1 x	Covered closure or fairings
1 x	3 copper lacquer wire Ø0,2 mm (1 m)
1 x	Locking cable tie 3.2x142 (uds)
1 x	Futaba External voltage input cable Futaba CA-RVIN-700
1 x	Canopy Lock V1 M3 Red (2 pcs)
1 x	Steering arm 16 mm Ø 3 mm
1 x	Stainless steel cable Ø 1.3 mm (10 m)
1 x	Steering arm 12 mm Ø 3 mm (2 uds)
1 x	Cable control set
1 x	Fully Threaded Steel Rod M2,5 (2 uds)
1 x	Servo MKS HV6120H
1 x	HV6150 Digital Servo
1 x	Servo MKS HBL380
1 x	Servo MKS HV1220
1 x	La Capitania di Venetia 1:50
1 x	SCHARNHORST accessories
1 x	Support Pitot JETI
1 x	Support Filtro FESTO
1 x	Support ECU Xicoy X-45
1 x	Servo MKS HV747
1 x	Duralumium F3A horn 30x10x23,5 mm (2 pcs)
1 x	Brass control horn M2 large for wire (2pcs)
1 x	6 mm M3 variable inclined horn
1 x	5 mm M2 variable horn
1 x	6 mm blue aluminium threaded horn with patella
1 x	Horn 6/35 with M3 Bearing
1 x	Control horn long w/ball
1 x	20 mm carbon horn
1 x	25 mm Sandpaper file
1 x	Crawler GRE-24 RTR 1:24 Arena
1 x	Trailing edge BALSA 35x8x1000 mm
1 x	Pine wood slat 2.0x2.0x1000 mm
1 x	Pine wood slat 3.0x7.0x1000 mm
1 x	Mahogany wood slat 3.0x3.0x1000 mm
1 x	Pine wood slat 2.0x10.0x1000 mm
1 x	Snap short M2 (10 uds)
1 x	Split M1,2x10 (10 pcs)
1 x	Connector CAN 15
1 x	Extension 5 lipos JST - JST/C

3,816.82EUR