890.00EUR

EXTRA 300 78" V3 Orange/Blue
[EXTR119O]


EXTRA 300 78" V3 Orange/Blue

DESCRIPTION

From the initial release of the 78 inch Extra 300 in 2009 when our team pilot and good friend Donatas Pauzuolis from Lithuania won the FAI World Airgames Artistic Aerobatic competition with a prototype of the 78" Extra, it immediately found favor within the RC aerobatic community and has remained one of our best selling aircraft. We decided that this iconic airframe deserved an update to bring it up to spec with our other current airframes. Just like our other recent releases there has been some serious weight reduction involving extensive use of composites. The model that we have been flying during testing is a full pound lighter than the previous V2 version that we built and flew extensively during the preliminary testing of the Xpwr motors! What this has allowed is for us to use the Xpwr 35, which allows us to use smaller batteries, contributing to the lower weight. The 21x10 that we use on the Xpwr 35 is still a huge disc on this size model and power is nothing short of ballistic. It is for this reason that we now feel the 78" Extra is THE current sweet spot for super floaty yet aggressive electric 3D flying: Using 2 of the batteries that we all use in our 60" models (6S 3300-4000 mah) we can now experience 5-6 minutes of some of the best aerobatic performance currently available in a gorgeous state of the art 2 meter airframe. Of course the Xpwr 40 is still an excellent choice for this model and we have zero reservations recommending this motor.

The V3 Extra is available in 2 standard Oracover color schemes (not printed), the Jim Bourke Orange/Blue/White scheme and the Red/Black/White scheme borrowed from our V2 104" Extra. It comes complete with a top quality hardware package and full decal set and now includes a carbon fiber landing gear in place of the original's aluminum gear, a carbon fiber tailwheel assembly, wing and stab tubes.

FEATURES

Wingspan: 78 inches (1980mm)
Length: 76 inches (1930mm)
Wing Area: 1225 sq. in. (7.903 sq. cm)
Weight: 11.5 - 13 lbs. (5,5-6 kg)

In the box

Extra 300 V3 Orange/Blue
Hardware package
Decal set
Carbon fiber landing gear
Carbon fiber tailwheel assembly
Carbon fiber wing and stab tube


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Blind nut M5 (4 pcs)
1 x Blind nut M5 (10 pcs)
1 x Servo MKS HV6130
1 x Servo MKS 6100 DS
1 x 50 mm servo arm with bearing (2 pcs)
1 x 7 Servo SET 9g DS MG + Full servo extension cable set for Avanti
1 x Cable coupler M3 (10 uds)
1 x Black large kwik link (10 pcs)
1 x Clevis plastico I=44 mm / hole 3mm / pin 2 (2 pcs)
1 x Kwik link AL M3 L:40 mm (2 pcs) + Pin Ø 2,5 mm
2 x BRASS CONTROL HORN M3x16 mm 2pcs
1 x Kwik link AL M4 con Clip (2 pcs)
1 x Aluminium coupler M2/2 with ball bearing (1 pcs)
1 x Ball link duraluminium M3 V1 (10 pcs)
1 x Ball Link ALU M3 - RH (1 pcs)
1 x Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 2,0 mm
1 x Aluminium red ball links M3 V1 (10 pcs)
1 x Brass ball links BS M3 V1 (10 pcs)
1 x BALSA leading edge 8x10x1000 mm
1 x BALSA trip 2.0x2.0x1000 mm
1 x BALSA trip 5.0x5.0x1000 mm
2 x BALSA triangular 15x15x1000 mm
1 x A/C quality beech plywood 600x300x6.0 mm
1 x A/C quality beech plywood 600x300x5.0 mm
1 x A/C quality beech plywood 600x300x0.8 mm
1 x Balsa panel 1.5x100x1000 mm
1 x BALSA trip 3.0x5.0x1000 mm
1 x BALSA trip 3.0x3.0x1000 mm
1 x Beech dowels 2.0 x 1000 mm
1 x BALSA trip 10x10x1000 mm
1 x BALSA triangular 6x6x1000 mm
1 x Balsa panel 2.5x100x1000 mm
1 x BALSA trip 2.0x10.0x1000 mm
1 x Beech dowels 10 mm x 1000 mm
1 x A/C quality beech plywood BIRCH 600x300x1.0 mm
1 x BALSA trip 8.0x8.0x1000 mm
1 x Balsa panel 5.0x100x1000 mm
1 x A/C quality beech plywood 1520x750x3.0 mm
2 x BALSA trip 4.0x4.0x1000 mm
1 x Oracover Azul Cielo 2 m
1 x Foil for sticking flaps and ailerons
1 x Flap hinge 33x9 mm (6 pcs)
1 x Release wax 250ml
1 x Carbon tube (L 1000 mm, Ø16 mm, Ø12 mm)
1 x Spray adhesive INFUTAC (Clear) 500 ml
1 x Paint gun for sprays
1 x Piloto Jet "Green" 1/6 Scale
1 x ABS tube 8.0x6.0x1000 mm
1 x ABS tube 7.0x5.0x1000 mm
1 x ABS tube 4.0x2.0x1000 mm
1 x Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
1 x Brazo servo aluminio HITEC HS-125MG/5125MG
1 x Cable silicona macho batt. receptor 30 cm (Futaba)
1 x Xplorer2 anemometro
1 x Silicone 0,35 qmm servos cable Futaba (5 m)
1 x Cabel PVC 2 x 0.25 mm2 (5 m) red-black
1 x Modulo telemetria 500 mW/100 mw Radio aire/Tierra Modulo 915 MHz
1 x Charger HITEC CG-42 TX 7.2v/ RX 4.8v (80 mA)
1 x Servo BLUE Bird BLS-H71B v2
1 x Actuador lineal HLS12-100210-7.4v
1 x WINGO 2 PNP
2 x CRACK YAK (Mini) 600 mm
2 x Sun Cover ULTIMATUM 2.0 (Hispano Aviacion)
1 x Equipment set XL
1 x Locking cable tie 3.2x142 (uds)
1 x Threaded coupler ALU Left M3 Ø 4 (2 uds)
1 x Antonov AN2 Scale 1/6 - 3m
1 x Threaded coupler M2,5 Ø 2 mm (10 pcs)
1 x Soporte servo KST X10 mini / DS135MG
1 x Adapter 4,0 mm M6
1 x Adapter 3,2 mm M6
1 x Parachute expulsion foam
1 x Adapter 5,0 mm M8
1 x Threaded coupler ALU M2 Ø 3 (2 uds)
1 x Servo KST X10-710 V8.0 7.5Kg HV
1 x LED blink wire flashing (orange - 2pcs)
1 x Threaded coupler M2,5 (10 pcs)
1 x Porta Kwik link M3 3 mm (2 pcs)
1 x Pulley brass 5/1,5 (2 pcs)
1 x Glider retract undercarriage 8-16 Kg 2.5-3.2(140 mm wheel with b
1 x wire tensioner (black)
1 x Retract undercarriage for gliders up to 3,5 Kg
1 x Jet Afterburner Simulator NF-Jet3 YSW
1 x NF-3 RC set
1 x Cable coupler M2 (10 uds)
1 x Pull-Pull complet set with CF rudder double servo arm
1 x Retract undercarriage
1 x LED blink wire flashing (red - 2pcs)
1 x Retract undercarriage for gliders 3-7 Kg 3.8-4.3 (without wheel)
1 x Jet Afterburner Simulator NF-Jet2YY Set
1 x LED wire (blue - 2pcs)
1 x Pulley brass 2,5/1 (2 pcs)
1 x NF-3X-80 liner Kit
1 x 4 mm M3 red control terminal (4 pcs)
1 x Wire easy tensioner (red)
1 x Wire easy tensioner (silver)
1 x Pulley brass 4/1,5 (2 pcs)
1 x LED blink wire flashing (white - 2pcs)
1 x Set clevis for pull-pull (TY13233 & TY13234)
1 x Ferrita con funda
1 x Motor NGH GF30
1 x Pulley brass 2,5/1 (2 pcs)
1 x Clevis plastico I=30 mm / hole 2.5mm / pin 1 (2 pcs)
1 x Transmitter Stick Ends V5 Blue - M3 Futaba/Hitec/Spektrum DX8 (2
1 x Liston HAYA 10 x 10 x 1000 mm
1 x Pine wood slat 2.0x2.0x1000 mm
1 x Heat-conducting adhesive (2x2ml), WLK DK 4
1 x LiIon Battery 3000 mAh 3.3v 15A (2 pcs)
1 x PWC6 PowerWingConnector for 6 servos with fuselage socket
1 x DPSI Micro MPS
1 x DPSI Micro SingleBat 5.9V/7.2V magnetic switch
1 x SU-31 M (Aero-naut)
1 x Sukhoi 29S 140" 3D Monster WHITE/BLUE/RED (SebART)
1 x MythoS 50E White/Blue
1 x Miss ULTIMATE 50E Yellow/Black
1 x MAMBA 10 G2 PNP
1 x Stainless steel cable Ø 0.5 mm (20 m)
1 x Steering arm 16 mm Ø 3 mm (2 uds)
1 x Long pinned hinge (12 uds)
1 x Cierre cabina aluminio Ø5, I=16 mm
1 x OPUS-V / Jet-CC-BF
1 x Sun Cover PC 21 XXL (JMB Jets)
1 x Switch Cap L (black)
1 x DPSI RV Mini 6 (2008)
1 x PWC4 wing/fuselage connector for 4 servos
1 x DPSI RV Mini 5 Magic
1 x DPSI Micro - DualBat 5.9V / 7.2V JR-JR (Dual Power Supply)
1 x DPSI LR-S (with push buttons)
1 x Motor Set CHALLENGER Indoor
1 x DPSI Micro - DualBat 5.9/7.2 MPX-2xMPX dual
1 x Wing connector 8pin with pin strip, plug & socket
1 x EWC3 40 cm wing connector
1 x DPSI RV Mini 6 Magic
1 x Filter Capacitor JR
1 x Magnetic Connect locking system
1 x DPSI Micro - RCS
1 x DPSI 2001 RV
1 x MPX Sub-D Adaptor
1 x Optotronix Aurora Plug
1 x CHALLENGER Indoor
1 x DPSI Ampere battery backer
1 x OPTOTRONIX Aurora LCU
1 x SF260 SIAI MARCHETTI 50E yellow/black (SebArt)
1 x ANGEL 48" pp red/blue/white
1 x Sukhoi 29S 50E V3 YELLOW/BLACK (SebART)
1 x MythoS 125E WHITE/BLUE (SebART)
1 x EXTRA 300L 1.2 m Deep Purple
1 x ARTIST 1.560 mm
1 x Crack TURBO Beaver Blue
1 x EXTRA 330SC-E 95" Orange/Blue/White
1 x PARKMASTER PRO Kit + (RR)
1 x LASER 260 60" V2 ARF Yellow (SkyWing)
1 x LASER 260 60" V2 ARF Red (SkyWing)
1 x Miss ULTIMATE 50E Red/Black
1 x EXTRA 300 78" V3 Yellow/Red/Blue
1 x SF260 SIAI MARCHETTI 50E red/white (SebArt)
16,719.33EUR
Manufacturers
Languages
Español English
Currencies