679.90EUR

DRACO 2.0m BNF
[ELF12550]


Product Details
The Extra Scale DRACO 2.0m is one of the most detailed and feature-rich E-flite® aircraft to date, and the only officially-licensed model of Mike Patey’s ultimate bush plane. It excels at STOL and scale-like flying — and looks amazing while doing both!
Key Features
The only officially-licensed scale replica of the one-of-a-kind DRACO by Mike Patey Extra Scale details including an abundance of molded-in surface features, steps, antennas, wingtip skids, and much more Functional Extra Scale features including licensed KING shocks on the main gear and tail wheel, leading-edge slats, slotted flaps, and more 17 total LEDs including navigation, landing, down, tail beacon, reversing and other lights with adjustable light controller Spektrum AR637TA receiver with full-range telemetry and industry-leading DSMX® technology
In The Box
(1) E-flite® DRACO™ 2.0m
(1) 100A Spektrum™ Avian™ Brushless Smart ESC (installed)
(1) Brushless Outrunner Motor (installed)
(6) Metal-Geared Servos (installed)
(1) Spektrum™ AR637TA 6-Channel Receiver
(1) Product Manual

Needed to Complete
Full-range 6-8+ channel Spektrum™ DSMX®/DSM2® compatible transmitter 4S 14.8V to 6S 22.2V 4000–7000mAh LiPo with EC5™ or IC5® Connector Compatible LiPo charger

THE ULTIMATE BUSH PLANE
By most estimates, planning and building the full-size DRACO should have taken years. Entrepreneur Mike Patey — whose exceptional drive and Back to Work™ ethic have inspired thousands of people — accomplished it in just over five months! Mike started with a Wilga 2000, replacing its Lycoming O-540 piston engine with a Pratt & Whitney PT6A-28 turboprop boasting about twice the power at half the weight. Many additional modifications followed before Mike proudly unveiled his "ultimate bush plane". It could go to the same places as a Carbon Cub, but also climb twice as fast; reach altitudes up to 28,000 feet; and cruise cross-country at 180 MPH while carrying four people plus gear. Changes from the Wilga were so extensive that the FAA approved Mike's redesign as an experimental exhibition aircraft. The DRACO 2.0m is equally unique and astounding — and it's also one of the most highly-engineered, detailed and feature-rich E-flite® aircraft yet!

Features
The ultimate bush plane for an unmatched STOL, scale and beyond flying experience The only officially-licensed scale replica of the one-of-a-kind DRACO by Mike Patey One of the most highly-engineered, detailed and feature-rich E-flite® aircraft to date Extra Scale details including an abundance of molded-in surface features, steps, antennas, wingtip skids, and much more
Functional Extra Scale features including licensed KING shocks on the main gear and tail wheel, leading-edge slats, slotted flaps, and more 17 total LEDs including navigation, landing, down, tail beacon, reversing and other lights with adjustable light controller
Clear windshield and windows plus a detailed cockpit with backlit instrument panel and pilot figure
Factory-installed, high-power 4S- to 6S-compatible brushless motor with large diameter 4-blade prop
Fits batteries from 4000–7000mAh to provide a wide range of performance and flight times up to 10–15+ minutes
100-amp Spektrum™ Avian™ Smart ESC provides real-time battery voltage, current draw, motor RPM, and other data via compatible receivers and transmitters

Optional-use motor reversing for special ground handling and other capabilities with compatible 7+ channel transmitters
Spektrum AR637TA receiver with full-range telemetry and industry-leading DSMX® technology
Easy to fly with innovative and optional-use SAFE® Select flight envelope protection
The unmatched stability and locked-in feel of exclusive AS3X® technology
Six factory-installed metal-geared servos with internal, ball-link equipped linkages
Large and convenient, magnetically-secured top hatch with large battery compartment
Shock-equipped and steerable tailwheel for improved forward and reverse ground handling
Scale-like articulated and shock-absorbing main landing gear with oversized tundra-style tires
Custom-made and fully-molded carbon fiber gear to handle short takeoffs from and landings on a variety of surfaces
Two-piece wing with quarter-turn thumbscrews plus V2 hands-free servo connection system for quick and easy assembly/disassembly
Durable, fully-molded EPO airframe with carbon fiber and wood reinforcement throughout
Factory-applied paint plus decal finish looks great and saves time
Easy final assembly in less time than it takes to charge a battery

ABSOLUTELY ONE OF A KIND
Inspired by the incredible ingenuity and effort Mike Patey put into building the full-sized aircraft, E-flite® offers the only officially-licensed scale replica of the ultimate bush plane! The amazing DRACO 2.0m is one of the most highly-engineered, detailed and feature-rich RC models ever produced. Beyond its complex design and the accurate shape of its fully-molded, lightweight and durable EPO airframe with a factory-applied finish, it also features an abundance of Extra Scale details including a variety of surface features, steps, antennas, wingtip "stinger" skids, and much more. The clear windshield and windows offer an excellent view of the detailed cockpit with pilot figure and backlit instrument panel. Functional Extra Scale features include licensed, scale-like KING shocks on the main gear and tail wheel, leading-edge slats, slotted flaps and more. There are also a total of 17 LEDs throughout the airframe — with a custom controller that allows you to select solid, strobing and other light combination options from your transmitter. Oversized, tundra-style tires on the custom-made carbon fiber main gear soak up bumps and provide excellent prop clearance, while the shock-absorbing and steerable tailwheel offers improved ground handling — even when taxiing backward with the optional-use motor reversing (compatible Smart receiver and 7+ channel transmitter required for reversing). Factory-installed, metal-geared servos with ball-link equipped and internal linkages deliver crisp, precise control. The high-power brushless outrunner motor can drive the scale 4-blade propeller with a wide range of 4000–7000mAh batteries, from a 4S pack for slow and smooth scale flight to 6S power for better-than-scale vertical performance. It's also equipped with a 100-amp Spektrum™ Avian™ Smart ESC, and the BNF® Basic version includes an AR637TA Smart receiver that delivers full-range telemetry including real-time battery voltage, current, motor RPM, ESC temperature, and more to compatible AirWare™ equipped transmitters. And even with its large-scale size and feature-packed design, the DRACO 2.0m can be flight-ready in less time than it takes to charge a battery! No tools are required for field assembly/disassembly because the two-piece wing is secured with quarter-turn thumbscrews. Best of all, if you've mastered flying at least one or two previous RC aircraft you can fly the DRACO 2.0m successfully, especially when taking advantage of the BNF® Basic version's exclusive AS3X® and optional-use SAFE® Select technologies. And it all adds up to offer an unmatched STOL (Short Take Off and Landing), scale and beyond flying experience unlike any other! The Plug-N-Play® (PNP) version lets experienced modelers choose and use their own transmitter, receiver, battery and charger. The Bind-N-Fly® (BNF) Basic version includes a Spektrum receiver equipped with AS3X and optional-use SAFE Select technologies so intermediate to experienced modelers can use their own transmitter, battery and charger. An ULTIMATE Combo including the BNF Basic version airplane, a Spektrum transmitter, Smart battery, Smart charger, the special tools and glue you need for assembly – plus a copy of RealFlight Trainer Edition RC Flight Simulator – is also available and saves you more than $70 compared to purchasing all of the items separately.
Are you new to flying RC (Radio Controlled) aircraft? If you are, we recommend learning to fly with one of our purpose-built trainer aircraft such as the HobbyZone® Carbon Cub S 2. Based on the Carbon Cub flown by Mike's wife, Chandra Patey, it's equipped with exclusive and innovative SAFE technology that makes it possible for almost anyone to learn to fly successfully! The Ready-To-Fly (RTF) version includes everything needed to fly in one box and is the perfect choice if you're a new RC pilot.

Exclusive Technologies (BNF® Basic only)
The DRACO 2.0m is equipped with exclusive Spektrum™ AS3X® and SAFE® Select technologies. AS3X works behind the scenes to smooth out the effects of wind and turbulence to deliver a locked-in feel that makes it seem like you're flying an even larger airplane. Optional-use SAFE Select offers pitch and bank angle limits along with automatic self-leveling that can be turned on and off at the flip of a switch! And if you don't want to enable the SAFE Select features, simply bind the receiver normally and only AS3X will be active.

Smart Technology
The exclusive Spektrum™ Avian™ Smart ESC provides a variety of real-time power system related telemetry data including motor RPM, current draw, overall flight battery voltage and more via compatible receivers (including the AR637TA installed in the BNF® Basic version) and Spektrum AirWare™ equipped transmitters (including the DX6e and 8e, DX6 G2/G3 and 8 G2, the DX9, the NX6, 8 and 10, the iX12, iX20 and others) while you fly. It will even show individual cell voltages, temperature of the flight pack and other data when using Spektrum Smart LiPo batteries. Plus, optional-use motor reversing offers special ground handling and other capabilities (compatible Smart receiver and 7+ channel transmitter required for reversing).

Versatile Power System
The factory-installed Spektrum™ Avian™ 100-amp Smart ESC and high-power brushless outrunner motor can drive the large-diameter four-blade propeller with a wide range of batteries. Install a 4S battery for slow and smooth scale flying, a 5S battery for added power, or a 6S battery to deliver better-than-scale vertical performance. Best of all you can install a 4000mAh battery to keep the weight and wing loading down, a 5000mAh battery for a great balance of performance and handling, or up to a 7000mAh battery to achieve long flight times up to 10-15+ minutes.

Extra Scale Details
The DRACO 2.0m features an abundance of Extra Scale details including molded-in panel lines, hatches and other surface features, steps, antennas, wingtip skids, and much more. A clear windshield and windows plus a detailed cockpit with backlit instrument panel and pilot figure add to the incredible scale appearance.

Functional Scale Features
Licensed, scale-like KING shocks on the main gear and tail wheel, leading-edge slats, slotted flaps and more are functional Extra Scale features that take your experience to another level.

LED Lights
There are a total of 17 LEDs throughout the airframe to simulate navigation, landing, down, tail beacon, reversing and other lights. They're connected to a custom light controller with different settings you can control from the transmitter to choose which lights turn on and off with various functions, glow solid, strobe and more.

Capable Gear
Like the full-scale DRACO, the articulated and shock-absorbing main gear is equipped with oversized, tundra-style tires to soak up the bumps of rough surfaces and provide excellent prop clearance. It's also custom-made from fully-molded carbon fiber to handle short takeoffs from and landings on a variety of surfaces. The shock-equipped and steerable tailwheel offers excellent ground handling, whether moving forward or when utilizing the optional-use motor reversing to taxi backward too.

Durable Precision
Construction with fully-molded EPO material makes it possible to replicate the complex details and shapes of the full-scale DRACO in a lightweight yet durable form. The result is an outstanding scale appearance that's easy to maintain and delivers the best possible flight experience, plus the factory-installed metal-geared servos with ball-link equipped, internal linkages deliver crisp and precise control.

Added Convenience
The two-piece wing is secured with unique, quarter-turn thumbscrews so no tools are required for field assembly/disassembly, and along with the V2 hands-free servo connection system, makes storage and transport as easy and convenient as possible. Best of all, you can have the DRACO 2.0m ready to fly in less time than it takes to charge a battery!

Specs
Approximate Assembly Time Less than 1 Hour
Battery Sold Separately
Battery Type LiPo (3.7V per cell)
Charger Sold Separately
Completion Level Bind-N-Fly
Flaps Yes
Power Type Electric
Material EPO
Minimum Required Radio 6-channel
Motor Type Brushless
Product Length 53" (1346 mm)
Product Weight 10.0 lbs (4535 g) with 6S 5000mAh 30C battery; 8.5 lbs (3855 g) without battery
Propeller Size 14.5 x 9 4-blade
Radio Sold Separately
Receiver Included
Recommended Motor Battery 4S 14.8V to 6S 22.2V 4000-7000mAh LiPo (sold separately)
Search Keyword srcdraco
Servos Included
Skill Level Level 2
Speed Control Included
Technology AS3X and SAFE
Wingspan 77.7" (1974 mm)


Comentarios
Aceptamos
Búsqueda Rápida
 
Use palabras clave para encontrar el producto que busca.
Búsqueda Avanzada
2 x Instrumentos individuales 1/4 Planeador
1 x Pegatinas números para marcar
1 x Cinta de sellado al vacío, 2,5 x 12 mm (hasta 140 ° C) 15 m
2 x Fibra carbono tela 160g/m2 100 cm x 2 m
1 x Cinta fibra de vidrio 225g / m² (Silane, liso) 40 mm, 100m
1 x Cuña desmoldeo roja (5 pcs) [40x20mm]
1 x Fibra carbono tela 160g/m2 127 cm x 1 m
1 x Fibra carbono tela 160g/m2 100 cm x 10 m
1 x AIREX® M060 lámina (amarilla) 1200x550x1,2 mm (5 pcs)
2 x Cinta carbono TeXtreme 38 g/m2 IM UD 20mm x 100 m
1 x Cinta fibra carbono 25 mm 3k 125 g/m2 x 10m
2 x Cinta fibra Carbono 125 g/m², 3k, UD (50 mm) roll/ 50 m
1 x Cinta fibra de vidrio 49 g/m2 5cm x 100m (plain weave)
1 x Cinta fibra carbono 50 mm 3k 200 g/m2 x 10m
1 x Fibra carbono tela 160g/m2 100 cm x 25 m
1 x Fibra carbono "MANGA" 12k 170 mm x 5 m
1 x AIREX® M060 lámina (amarilla) 1200x550x2,0 mm (20 pcs)
1 x ARAMID panel nido de abeja 1300x2600x2 mm
1 x AIREX® M060 lámina (amarilla) 1200x550x1,2 mm (10 pcs)
2 x Cinta fibra de vidrio 225g / m² (Silane, liso) 40 mm, 50m
1 x Bolsa vacio 1200 mm x 50 m
1 x Bisagra de aluminio tipo PIN 4,5x70 mm kit (2 pcs)
1 x Bisagra de nylon 20x20x0,3 (10 pcs)
1 x Bisagra cilíndrica 48 mm Ø 2,5 mm (5 pcs)
1 x Bisagra de aluminio tipo PIN 3,0x50 mm desmontable (2 pcs)
1 x Bisagra Micro flexible (12 uds)
1 x Bisagra de compuerta aluminio (1 pcs)
1 x Bisagra de Flaps (6 uds)
1 x Bisagra papel CA (12 uds)
1 x Varilla carbono 0.5 mmx1000 mm
1 x Varilla carbono plana 3.0 x 1.0 x 1000 mm
1 x Varilla carbono plana 1000x3.0x1.0 mm
1 x Cinta autoadhesiva 20 mm x 12m; Diente 1.0 mm
1 x Cable carga bateria transmisor Futaba 2x0,5 qmm (50 cm)
1 x Liston de BALSA Borde ataque 8 x 10 x 1000 mm
1 x Soporte conector XT-60 (2 pcs)
1 x Motor OS 3820-1200 eléctrico
1 x Aro pasacable Ø25 mm (4 pcs)
1 x Soporte grifo FESTO (2 pcs)
1 x Soporte bomba Xicoy X45
1 x Soporte Antena 2.4 Ghz (2 pcs)
1 x Sandwich carbon + poplar 2mm + carbon 290x160 mm
1 x Plancha fibra vidrio 350x150x0.5 mm
1 x Fibra carbono tela 160g/m2 127 cm x 10 m
1 x Fibra vidrio 163 g/m² 130cmx10m (Interglas 92105, aero, finish
1 x Plancha fibra vidrio 620x540x0,2 mm
1 x Fibra carbono tela 160g/m2 100 cm x 2 m (twill weave)
1 x Varilla carbono 0.8 mmx1000 mm
1 x Varilla carbono 2.5 mmx1000 mm
1 x Plancha ABS 500 x 400 x 0,5 mm (blanca)
1 x Varilla carbono 5.0 mmx1000 mm
1 x Fibra carbono tela 200 g/m² (Aero, plain weave) 100 cm x 5m
1 x Cinta fibra Carbono 125 g/m², 3k, UD (100 mm) roll/ 50 m
1 x Varilla carbono plana 1000x3.0x0.13 mm
1 x AIREX® M060 lámina (amarilla) 1200x550x6,0 mm (5 pcs)
1 x Fibra carbono TeXtreme® 80 g/m² (plain) 100 cm, roll/ 10 m
1 x Repelente agent PVA 250 ml
1 x Fibra carbono tela 68 g/m² (Aero, plain weave) 100 cm x 0.5m
1 x Bayoneta de carbono 13,4 mm Ø 0,48 mm
1 x Varilla carbono 20 mmx1000 mm
1 x Rodillo teflon 40 mm x 15 mm Diam.
1 x Plancha de goma espuma (310x210x3 mm)
1 x Plancha termoformable 0,3 mm (0,039") DIN A4
1 x Sandwich Carbon fibre Rohacell (800 x 280 x 3 mm)
1 x Fibra vidrio 25g 110 cm/ 20m (Interglass 02034, finish FE800 pl
1 x Plancha fibra vidrio 350x150x1.5 mm
1 x Fibra vidrio 163 g/m² 130cmx5m (Interglas 92105, aero, finish FK
1 x Film perforado 100 cm / 50 m
1 x Varilla carbono 2.0 mmx1000 mm
1 x Hoja Depron Aero 1250x800x3 mm
1 x Fibra vidrio 160 g/m2 "twill weave" (10 m x 1 m)
1 x Manta bolsa de vacio 150 gr/m2 Bobina 20m
1 x Manta bolsa de vacio 150 gr/m2 Bobina 50m
1 x Fibra carbono tela 160g/m2 100 cm x 3 m
1 x Plancha estireno 320x120x0.5 mm
1 x Plancha de goma espuma (310x210x5 mm)
1 x Sandwich carbon + poplar 3mm + carbon 480x290 mm
1 x Plancha aluminio 500x250x0.5 mm
1 x Plancha fibra vidrio 350x150x0.3 mm
1 x Sandwich carbon + poplar 4mm + carbon 290x160 mm
1 x METEOR 1.000 mm kit
1 x Set Equipamiento XL
1 x JOKER 3 1550mm
1 x DOMINO 46-55 Trainer 1583 mm
1 x Parte superior del rotor
1 x Cabeza Rotora Completa (3 palas)
1 x Tuerca para asegurar tornillos M2
1 x Soporte superior de las palas del rotor
1 x Enganche de las palas del rotor
1 x Me-163
1 x Motor simulado Cierva C30
1 x DRACO 2.0m Tren aterrizaje
1 x Avanti XS 1.8m Jet Blanco/Azul (SebArt)
1 x DRACO 2.0m Set ruedas
1 x Mig-29 "FULCRUM" (RBC Kits)
1 x MB-339 Aerofoam G2 "Italian Air Force Camu"
1 x Núcleo del buje del rotor
1 x Mini Avanti S 1.4m azul/blanco/rojo CLASSIC
1 x Turbo Timber Evolution 1.5m PNP
1 x Perforador hélices DLE170
1 x Liston ABS 1,0x2,0x1000 mm
1 x Resistencia 3W 5% OR82
1 x Varilla ABS 2,5x1000 mm
1 x Liston ABS I 3,5x1,75x330 mm
1 x Tren de aterrizaje completo
1 x Freewing F-14 Tomcat Twin 80mm EDF PNP (Deluxe Edition)
11,634.40EUR
Fabricantes
Información del Fabricante
E-Flite
E-Flite Página Principal
Otros productos
Idiomas
Español English
Monedas