595.00EUR

Freewing F-14 Tomcat Twin 80mm EDF PNP (Deluxe Edition)
[FREEWIF14]


Never before has an electric F-14 beenproducedin this size and with this high a degree of scale fidelity and quality.Easilyoneof the most beloved jets in history,we’re especially excited to offer thisthrilling F-14D Tomcat. For us and manyRC pilots in our customer family, it isa dream come true!
Our team workedtirelessly to develop an RC model whichbrings the excitement and scaleperformance of this hallmark aircraft to yourlocal flying field and toappropriately honor the F-14 Tomcat’s rightful placein aviation history. We choseto depict “Bullet 101”, the specially marked F-14Dfrom the VF-2 squadron“Bounty Hunters”, which was painted in the mid-1990s tocelebrate the 25thanniversary of the F-14’s service in the United States Navy.This rendition of“Bullet 101” is an appropriate salute to all the personnel whoserved alongsidethis breathtaking aircraft throughout its 32 year service toour country.
The signaturefeature of the real F-14 is its sweepingwing, and we've worked to design thismodel around this function as well. Whereprevious foam F-14 models failed,This F-14 succeeds. This is due to thelightweight aluminum “Wing Box” whichsupports a rigid wing in both forward andswept configurations. A sloppy wingcan be dangerous and so this F-14 wasdesigned around the Wing Box todistribute the loads across the fuselage andensure the model couldconsistently withstand high speed maneuvers withoutneeding any maintenance andadjustment to the wing sweeping mechanisms. Thewings pivot on flat bearings toreduce resistance and wear. Electric servolessactuators extend and sweep thewings along a four second span using steelcontrol rods and brass ball links.The result of this design is a dependable,maintenance-free, durable wing sweepfeature which when used with ourrecommended control settings provides pilotswith a worthy F-14 flyingexperience without the worry traditionally associatedwith swing wing models.
Scale fidelity,surface details, and builder-friendlinesswere also specific areas of focus.The PNP model arrives with the main fuselagecompletely assembled. All theelectronics –servos, EDFs, ESCs, UBEC, retracts,and lights—are completelyinstalled at the factory for the PNP variant. Thebuilder simply needs to screwon the wings and tail surfaces, affix the upperwing box plates with theprovided Allen bolts, epoxy on the forward nosesection, pop on the magneticnose cone, and then glue the assorted surfacedetails like the ventral fins,wing fences, antennas, pitot tube, etc. Bind yourreceiver (not included) tothe pre-labeled connections, match the recommendedsettings, and you’re readyto fly! The decision to add this F-14D to your fleetwill be an easy andresounding “Yes!”.
To furthersimplify the wiring and setup, this F-14incorporates an onboard mixing circuitboard which controls all the servos,taileron/aileron mixing, wing sweeping,and the lighting package. “Day-Bright”LEDs are used throughout the aircraftfor realistic lighting. With six staticoutputs and three flashing outputs,pilots can arrange their LEDs to keep thewingtip and wingroot lights on allthe time and leave the tail lights to flashintermittently, or experiment withother combinations. The wing box and circuitboard are accessed by removing asingle cover with six screws for convenientadjustment of all these features ifever needed.

Features:
Model offficially licensed by Northrop Grumman
2x 12 Blade factory balanced EDF with metal housing and 3530-1750KV brushless outrunner motors produces realistic jet turbine sound
Composite fan blades combined with metal EDF housing make the F-14 AMA compliant
Rigid aluminum wing box assembly for a swept wing configuration
Pre-installed servoless actuators to sweep the wing during flight
Super scale details include hand painted pilots, antennas, pitot tubes, etc
Proudly displaying the authentic "Bullet 101" livery of the VF-2 squandron "Bounty Hunters"
2x 80 Amp Hobbywing ESCs with single 8 amp UBEC
Electronic retractable landing gear with all metal shock-absorbing struts
Steerable, shock absorbing nose gear for enhanced ground maneuverability
Servo operated nose gear door (pre-installed sequencer)
Carbon spars and EPO foam construction provide the perfect balance between strength and flexibility
9x LED lights plus landing light (see manual for configuration options)
Nylon hinges on all control surfaces (superior to foam hinges)
Gapless flap hinges
Outrunner motors, servos, ESCs and EDFs come pre-installed for your convenience (PNP version only)
Removable magnetic nose cone for convenient transport


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
2 x Para-RC Mix
2 x Para-RC "RC-Evo-Cross" Rescue
1 x Rafale C (Aero-naut)
1 x Mini Avanti S 1.4m white/red
1 x Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m
1 x Actuador lineal HLS12-100210-7.4v
1 x Aluminium rod Ø 4.0 mm x 3000 mm
1 x Nylon hinge 20x15x0,3 (10 pcs)
1 x LUCAS pilot ARTF
1 x Ply-Span 450x600/13g Blue
1 x AX-60 starters (5 pcs)
1 x PPM Encoder Module
1 x Straightened rod Ø 0.5 mm x 1000 mm
1 x TP/TopFuel - JST-EH 4/5S Adapter
1 x Glass fabric tape 225 g/m² (Silane, plain) 30 mm X 100m
1 x Paramotor BackPack XXS (without accessories)
1 x USB HLS prog. interface
1 x Nylon hinge for flaps/gates 27x10,5 (2 pcs)
1 x 1/6 Pilot "Garry"
1 x Pilot "Duke" Legends Series (Slimline)
1 x Field folding model stand
1 x Truck-trailer for gliders 720 x 285 mm
1 x Brass rod Ø 1.5 mm x 1000 mm
1 x PROXXON - SANDING BELTS FOR BSL 220/E 180 GRIT (5 pcs)
1 x Brass hexagonal rod Ø 3 mm x 1000 mm
1 x Glass fabric tape 49 g/m² (Interglas 02037, finish FE 600/800, p
2 x Aluminum Bayonet / strongal D12 mm / 0.5 m
1 x Oratex Yellow Cub 10 m
1 x Opale Rucksack
1 x CC 01
1 x Brass rod Ø 0.5 mm x 1000 mm
1 x Militarian pilot "Kamikaze" size 9cm (Slimline)
1 x 1/12 Pilot "Tom"
1 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m
1 x CC 03
1 x Micro flex hinge (12 uds)
1 x Straightened rod Ø 0.8 mm x 1000 mm
1 x Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x EasyFLY Addon
1 x Monokote BLANCO jet (1.8x0.65m)
1 x Ball Link Plier
1 x Round Rod 6,0x1000 mm
1 x Brass rod Ø 1.0 mm x 1000 mm
1 x Straightened rod Ø 1.0 mm x 1000 mm
2 x Windsock Ozone L - 700 mm
2 x Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH
1 x Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm
1 x Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 100M
1 x Smoke set "M"
1 x 1/12 Pilot "Fighter"
1 x Hexagonal ball head 2.0 x 50 mm
1 x Nylon hinge for flaps 33x9 (2 pcs)
1 x Papel japones 12 grs/m2 760x510 mm JAPICO
1 x ORACOVER Fluor red (2 m)
1 x Oracover Azul 2 m
1 x Nylon hinge 15x0,3 (10 pcs)
1 x Oracover CARBON Metalic 1 m
1 x "S" set for planes
1 x ARAMID honeycomb 1300x2600x2 mm
1 x Interface Jack Adapter IKARUS
1 x Pilot JAN 1/4 Saiplanes
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs)
1 x Simulador RealFlight RF-9.5 S (sin emisora)
2 x 1/4 Pilot "Mike"
1 x Hot Glue Stick BLACK
1 x Yellow smoke canister 140 g
1 x 
1 x Vacuum pump P1-N
2 x JETImodel SINGLE BEC
1 x Fully Threaded Steel Rod alumin 60 mm M2,5 (2 pcs)
1 x Ball Link Plier
1 x Disposable Injector Bags (30x16cm) 100 pcs
1 x ABS Strip 1.0x5.0x1000 mm
1 x Field folding model stand SebArt
1 x Gates hinge
1 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m
1 x Nylon hinge 20x20x0,3 (10 pcs)
1 x Strip ABS 2.0x8.0x1000 mm
1 x Tube Pitot to PIXHAWK
1 x ABS Strip 1.5x2.0x1000 mm
1 x Red smoke canister 140 g
1 x Oracover ROYAL RED 2m
1 x Carbon fibre sleeve 12k 170 mm x 5m
1 x Truck-trailer for gliders 720 x 239 mm
1 x Ballast 700gr OPALE
1 x MB-339 Aerofoam G2 "Italian Air Force Camu"
1 x Canopy F9F Panther (Aero-naut)
1 x Motor Eachine Racer 250 Brushless Motor - BG2204 2300kv - CCW th
1 x Mini neumatic retract landing gear
1 x Air pressure gauge
1 x Landing gear retract neumatic (Jet Legend)
1 x PRO-HV Dual Action Valve
1 x Kit hydraulic brake
1 x Combo lighting module with covering drop shape
1 x Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m
1 x 
1 x Styrene plate 320x120x1.0 mm
1 x Male/Female prolonguer for Balancer Thunder Power 6S
1 x Vacuum pump 12 CFM
1 x Stickers-digit for marking
1 x 3,0x60 mm allen screwdriver
1 x FX three-position switched channel, long
1 x Female prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm
1 x Parachute BACKUP X100
1 x PowerBox Champion SRS
1 x 2 piece mounting frame
1 x Sealing Iron Profi LCD
1 x MPX 8 pins plug mold
1 x Militarian pilot "Fly Boy" size 9cm (Slimline)
1 x Propeller MEJZLIK 22x10 Electric light (36 g)
2 x EDGE XL Orange
1 x Black copper lacquer wire Ø0,2 mm (5 m)
1 x Aluminium tube with fibreglass case ø35x1.5mm, 500mm
1 x Fabric scissors curved (offset handles), 16 cm / 6" length
1 x Gear for D 54
1 x Aluminium tube with fibreglass case ø35x1.5mm, 1m
1 x Servo MKS HV 777A+
1 x APM2.6 Power module with 5.3V DC BEC
1 x 3 copper lacquer wire Ø0,2 mm (1 m)
1 x Adapter lead MPX/EC3
1 x Servoholder Dymond DS 1800 MG Digital (2 pcs)
1 x Reflector 18 mm (2 pcs)
1 x Extension 2/3 lipos JST - JST/C
1 x Futaba 76/92 mm servo pull-pull double arm with ball link HUB Al
1 x Vacuum Connection VA 1 (for hose Ø 6 mm)
1 x Carbon fabric 245 g/m² (twill weave) 127 cm, roll/ 10 m
1 x Futaba 38 mm servo arm with ball link
1 x ABS Strip 1.0x2.0x1000 mm
1 x Styrene plate 320x120x0.5 mm
1 x Extension 5 lipos JST/C - JST
1 x Thermoforming sheet 0.3mm (0.039in) DIN A4
1 x Glass fabric 49 g/m² (1,27 x 5 m)
1 x PROXXON - SANDING BELTS FOR BSL 220/E 80 GRIT (5 pcs)
1 x EWC3 40 cm wing connector
1 x Starter 12v (Max 180 and 30ccm)
1 x Slave-cable USB Easy Sim
1 x PROXXON - SANDING BELTS FOR BSL 220/E 120 GRIT (5 pcs)
1 x Set brocas Ø 1.5-2.0-2.5-3.0 mm (4 pcs)
1 x Cut tube
1 x Interruptor RX/Batterie
1 x Hot Glue Stick RED
1 x Female connector JST SH 1.0mm with 10 cm wire
1 x 1/12 Pilot "Langley"
1 x 100g Flux Paste for Silver Solder
1 x External LED's (2 pcs)
1 x Digital scale up to 40 kg
1 x PowerBox MicroSwitch
1 x EDGE 540 V3 (Superlite) ORANGE
1 x Mini AVANTI S EDF 80MM RTF Combo Lipos 5000-6s (SebART)
11,744.94EUR
Manufacturers
Languages
Español English
Currencies