2 x | Surprise XII Horizontal Estabilizer (Freudenthaler) |
1 x | Windsock Ozone L -1200 mm |
4 x | Aramid 50 daN 50 m |
5 x | Shirt Hispano Aviación |
6 x | Vest clothes Hispano Aviación |
5 x | Softshell Hispano Aviación |
6 x | Cap Hispano Aviación |
2 x | Motor DLE 200cc Std |
4 x | Motor DLE 200cc Premium Muffler |
3 x | Small Crow DLE-170M |
3 x | Motor DLE 430 cc - Paramotors |
4 x | Motor DLE 170 M- Paramotors |
1 x | ASH 31 Mi Scale:1/3 - 7m |
2 x | ABS Strip 1.5x3.0x1000 mm |
2 x | ABS Strip 1.0x4.0x1000 mm |
2 x | Propeller APC 16x10 Glow/Gas |
2 x | 6 mm red aluminium threaded horn with patella |
2 x | Horn 5/20 with M2 Bearing |
2 x | 6 mm aluminium horn with patella |
2 x | 6 mm M3 variable inclined horn |
3 x | Horn 6/35 with M3 Bearing |
3 x | Extra-long adjustable aluminium control horn 2,8x34 |
2 x | Cable control set |
3 x | Horn 6/27 with M3 Bearing |
3 x | Horn 5/10 with M2 Bearing |
2 x | Horn mando small (2 pcs) |
4 x | Fully Threaded Steel Rod M2,5 (2 uds) |
2 x | Horn F3A de Titanium 16 mm (2 units) |
2 x | Horn for flap control (1 pcs) |
1 x | 6 mm M3 variable horn |
2 x | Brass control horn M4 long for wire (4 pcs) |
3 x | Control horn long w/ball |
2 x | 20 mm carbon horn |
2 x | Horn with ball 55x40 |
1 x | 6 mm blue aluminium threaded horn with patella |
2 x | Brass control horn M4 short for wire (4 pcs) |
1 x | Horn with ball 40x30 |
3 x | Cable with accesories |
2 x | Horn 5/15 with M2 Bearing |
2 x | Brass control horn M4 short for wire (10pcs) |
3 x | Brass control horn M2 large for wire (2pcs) |
1 x | Horn 20x28,5 mm (2 pcs) |
3 x | 5 mm M2 variable horn |
2 x | Horn 6/20 with M3 Bearing |
1 x | Extra long horn 60x30 |
1 x | Horn micro type4 Ø 0,5 (2 pcs) |
1 x | Brass control horn M2 long for wire (10pcs) |
2 x | Horn 13,5x16 mm (2 pcs) |
2 x | Brass control horn M2 short for wire (2 pcs) |
2 x | Horn mando long (2 pcs) |
2 x | Adjustable brass horn threaded M3 |
2 x | Horn 16,5x20 mm (2 pcs) |
2 x | 5 mm M2 variable inclined horn |
3 x | Duralumium F3A horn 30x10x23,5 mm (2 pcs) |
3 x | Horn DUBRO 1/2A |
5 x | 250 mm / 16 mm Airbrakes |
1 x | Gracia Maxi ARF (Top Model) |
1 x | ABS tube 18.0x16.0x1000 mm |
3 x | 4 mm Prop Adapter M6 |
1 x | Glases Nimbus |
1 x | Silicone 0,50 qmm servos wire Graupner(5 m) |
2 x | SE Ring 450 mm (2 pcs) |
1 x | Xplorer1 anemometro |
1 x | M3 INDUSTRIAL ball link (2 uds) |
1 x | FA27.2×8.9 Prop-2PCS/PAIR |
1 x | Carbon Non-Woven, 240 g/m² 100 cm x 5m |
1 x | 67 mm cylidric hinge Ø 4,5 mm (5 pcs) |
2 x | Beech dowels 4.0 x 1000 mm |
1 x | MPX-Dean "T" Adapter |
2 x | Swift ARF 2000 mm Red (Hacker Model) |
1 x | PC-21 XXL 3.395 mm |
1 x | Heat Seal Iron |
1 x | Antenna holder bracket double |
1 x | Joint with bearing M2,5 22x5,5 |
1 x | Gracia Maxi ARF, bags (Top Model) |
1 x | Militarian pilot "Fly Boy" size 9cm (Slimline) |
1 x | ABS tube 9.0x8.0x1000 mm |
1 x | Futaba SBS-02A Air Pressure Telemetry Sensor (FASSTest/T-FHSS) |
1 x | Tape GFK 25 mm |
3 x | Threaded coupler ALU M3 Ø 6 (2 uds) |
1 x | Circlik for shaft 1.9 mm (10 pcs) |
1 x | Propeller 3BL 30 mm M4 plastic Left |
1 x | Strip 2,5x1,25x330 mm |
1 x | Carbon tube (L 1000 mm, Ø22 mm, Ø21 mm) |
1 x | Small pinned hinge (6 uds) |
1 x | Breatex™ Non-woven absorber 300 g/m² Roll 41 m |
1 x | Profile ABS triangular 4.0x1000 mm 90º |
1 x | Banna gold connector 2,5 mm (100 M/F pairs) |
1 x | Extension silicon 25 cm (Graupner) |
3 x | Threaded coupler M2,5 Ø 2 mm (10 pcs) |
1 x | Field folding model stand SebArt |
1 x | Optotronix Aurora Plug |
1 x | JETImodel SINGLE BEC |
1 x | BALSA triangular 8x8x1000 mm |
2 x | 48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs) |
1 x | T-Motor MN705-S Kv125 (pack 2 uds) |
1 x | Hot Glue Stick BLACK |
1 x | Pine wood slat 2.0x2.0x1000 mm |
1 x | Adaptador USB - YGE |
2 x | Adapter 3,2 mm M5 for spinner 30 mm fixed propeller |
2 x | Optical RPM Sensor |
1 x | Xplorer4 anemometro |
1 x | ABS Strip 1.0x5.0x1000 mm |
1 x | Steel tube (L 1000 mm Ø10 mm, Ø9,7 mm) |
3 x | Threaded coupler ALU M2 Ø 4 (2 uds) |
2 x | Adapter 3,2 mm M6 |
1 x | Silicone 0,25 qmm servos wire Graupner (5 m) |
1 x | ABS 500 x 400 x 1,5 mm (white) |
1 x | Rescue 1,8m2 / BackPack |
1 x | T-Connector 4.0 mm x 1000 mm |
1 x | Profile ABS Square 1 x 1000 mm |
2 x | Bec MR UBEC 5A (5v/6v/7v) |
1 x | EC-Cutter |
1 x | Straightened rod Ø 1.0 mm x 1000 mm |
1 x | 20x1000 mm Ring Strap Back To Back |
1 x | Digital precision scale up to 2000 g |
1 x | 1/6 Pilot "John" |
3 x | Locking cable tie 3.2x142 (uds) |
2 x | Ball link M2 (10 pcs) |
2 x | Red smoke canister 100 g |
3 x | 1,6x1000 mm 2:1 red termoretract tube |
2 x | Connectors banna oro 8,0 mm (Male) 5 pcs. |
1 x | Carbon fiber rod 5.0 mmx1000 mm |
3 x | Paramotor Kit Camo H1.5/ Ben Red |
1 x | Piloto Jet "Red" 1/6 Scale |
2 x | Pin type hinge Al 3,0x50 mm demount (2 pcs) |
2 x | Cable silicona female batt. receptor 30 cm (Futaba) |
2 x | Quicklock washer 3.5 mm (10 pcs) |
2 x | ORACOVER transparent Yellow (10 m) |
1 x | Bag connector 2 mm |
2 x | Crimping sleeves for 1.1 mm cable (10 pcs) |
2 x | Threaded coupler ALU Left M2,5 Ø 4 (2 uds) |
2 x | ABS tube 3.0x2.0x1000 mm |
3 x | Motor OS 3820-1200 electric |
1 x | PowerBox Competition SR2 |
2 x | Strip ABS 2.0x5.0x1000 mm |
1 x | Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs) |
1 x | M2 5Diam black ball link V2 (2 pcs) |
2 x | Fox 4000 mm (Airwold) |
1 x | Prop Shaft Adapter 4 mm/M8 "long" 35 mm |
1 x | Futaba S-Bus Rx/Gyro Link Lead |
2 x | Threaded coupler ALU Left M3 Ø 4 (2 uds) |
1 x | "S" set for planes |
1 x | Threaded coupler M3 (10 uds) |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m |
1 x | Servo MKS HBL599 SL |
1 x | Double conector with JR adapter and 200 mm extension |
1 x | Black large kwik link (10 pcs) |
1 x | Beech dowels 2.0 x 1000 mm |
2 x | Aluminium cap bolt washer M3 blue (8 pcs) |
1 x | EasyFLY Addon |
1 x | Universal Colour Paste white 50 g |
1 x | Windsock Ozone L - 700 mm |
1 x | Aluminun wheel collar 3.5 mm Ø (4 uds) |
1 x | Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm) |
1 x | Papel japones 12 grs/m2 760x510 mm JAPICO |
1 x | Circlik for shaft 1.2 mm (10 pcs) |
1 x | Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 1,6 mm |
2 x | Mini VISION "spread tow" CFK |
1 x | ABS tube 5.0x4.0x1000 mm |
1 x | T-Motor U7-V2.0 Kv420 |
1 x | Field folding model stand |
1 x | TS832 to Gopro AV/Power Cable |
1 x | Stainless steel cable Ø 0.5 mm (20 m) |
1 x | Kwik link AL M4 con Clip (2 pcs) |
1 x | X-RAY Micro QR |
1 x | Flat Connector 4.0 mm x 1000 mm |
2 x | 1,5x50 mm allen screwdriver |
4 x | Threaded coupler M2,5 Ø 3 mm (10 pcs) |
1 x | ABS tube 16.0x14.0x1000 mm |
1 x | Cable set PREMIUM , fuselage/wing one4one |
1 x | Carbon fiber rod 12 mm x 1000 mm |
1 x | GRAFAS MAXI ARF |
1 x | Ball Link Plier |
1 x | Aluminun wheel collar 6 mm Ø (4 uds) |
1 x | Futaba male 40 cm extension |
1 x | ABS tube 6.0x4.0x1000 mm |
1 x | ABS angle 6,0x6,0x1000 mm |
1 x | Steering arm 12 mm Ø 4 mm (2 uds) |
1 x | Connectors DEANS (T) micro |
1 x | Civilian pilot "G-Man" size 9cm (Slimline) |
3 x | Locking cable tie 2.5x100 (uds) |
1 x | Carbon Non-Woven, 160 g/m² 100 cm 10 m |
1 x | PC-21 2.880 mm (w/o oracover) |
1 x | Circlick securite |
1 x | 45 mm rods + T patellas set for direction control |
1 x | Ply-Span 450x600/13g Yellow |
1 x | Silicone 0,14 qmm servos wire Graupner (5 m) |
1 x | Circlik for shaft 1.5 mm (10 pcs) |
1 x | Copier 5x20 cm pcs |
1 x | Propeller 3BL 30 mm M4 plastic Right |
1 x | Angle measurer |
1 x | Interface Jack Adapter IKARUS |
1 x | Pin type hinge Al 3,0x50 mm (2 pcs) |
1 x | Green smoke canister 140 g |
1 x | Carbon fiber flat 1000x3.0x0.13 mm |
1 x | Blind nut M6 (4 pcs) |
1 x | 5 LiPo XH>EH adapter |
1 x | PC-21 2.880 mm WHITE/RED |
1 x | Aero-Master Wings (Aero-naut) |
2 x | Propeller set 400 (2R+2L) |
1 x | L cockpit anchor "tipe F3A" (2 pcs) |
1 x | PVC 0,35 qmm servos wire Graupner (100 m) |
1 x | Glases Flitemaster |
3 x | Threaded coupler ALU M3 Ø 4 (2 uds) |
1 x | Fiberglass heat shield Ø 4 mm 1000 mm |
1 x | Initior Transmitter FTX2 Wireless |
1 x | Steel tube (L 1000 mm Ø4 mm, Ø3,7 mm) |
1 x | Balsa panel 1.5x100x1000 mm |
1 x | Aluminium cap bolt washer M4 blue (8 pcs) |
1 x | Me-163 |
1 x | Circlik for shaft 2.3 mm (10 pcs) |
1 x | PowerBox Sensor V3 MPX/Jr |
1 x | Ball link M2,5 (10 pcs) |
1 x | Canopy Sweet / Siesta |
2 x | Aluminium alloy coupler for carbon tube 6/M4 |
1 x | MAULE M-7-420 2.8m Red |
1 x | Red smoke canister 140 g |
1 x | Quicklock washer 2 mm (10 pcs) |
1 x | Servo SAVOX SV-1254 MG HiVolt Low Profile |
1 x | 10 mm floating pad (72 pcs) |
2 x | Propeller mounting nuts Black / Silver Rocket 400 or Phatom simi |
1 x | DPSI Ampere battery backer |
1 x | Anodized alum. M3x0,5x20 mm Flat Head screw (4 blue pcs) |
1 x | Connectors MPX black female |
1 x | Ferrita 27x14x7 mm |
1 x | Profile ABS half cane 2.5x1000 mm |
1 x | Ion Pro NG electric with flaps RED Fluor (JP Model) |
1 x | Cable coupler M2 (10 uds) |
1 x | Set of buckles and strap, 1:4 scale. |
1 x | BALSA triangular 10x10x1000 mm |
1 x | FOX ARF 2000 mm Red (Hacker Model) |
1 x | Handle for PERMAGRIT lime |
1 x | 80 mm rods set for direction control |
1 x | Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm) |
1 x | Tygon DUBRO Medium 15m |
2 x | DJI FPV Combo |
1 x | Extension silicon 75 cm (Graupner) |
1 x | Pad self adhesive, up to 3mm / 0.12″, (10 pcs) |
1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m |
2 x | BRASS CONTROL HORN M3x16 mm 2pcs |
1 x | Ply-Span 450x600/13g Orange |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 20m |
2 x | Trike XL motor set (motor+esc+prop) |
1 x | Fox MDM 1 6000 mm |
1 x | TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m |
1 x | Small aluminium horn blue (2pcs) |
1 x | Oracover Azul 2 m |
1 x | Demoulding wedge red (40 x 20 mm) 5 pcs |
1 x | Protective Cover for wires Ø 6 mm 1000 mm |
1 x | Clip mini fixing for wing (2 pcs) |
1 x | Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds) |
1 x | PVC 0,14 qmm servo wire Futaba (5 m) |
1 x | Fox MDM 1 4000 mm DeLuxe,cabina |
1 x | 100g Flux Paste for Silver Solder |
1 x | Propeller APC 14x6 Glow/Gas |
1 x | Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs) |
1 x | EC5-Set female, simple quality, 2 x female pin, 1 x blue housing |
1 x | White smoke bombs AX-60 (5 pcs) |
1 x | BALSA triangular 15x15x1000 mm |
1 x | 10 mm Prop Adapter M12 |
1 x | Canopy Latch |
1 x | Brass hexagonal rod Ø 3 mm x 1000 mm |
1 x | 12 mm floating pad (49 pcs) |
2 x | 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
3 x | 3 mm Prop Adapter M6 |
1 x | M3 Maxi ball link (2 uds) |
1 x | Initior Receiver FRX2 Wireless |
1 x | Presto SF Light Filler styrene-free (420 g) |
1 x | 25 mm reinforced hinge |
1 x | Aluminium cap bolt washer M3 green (8 pcs) |
1 x | Silicone black 0,75 qmm wire ( 25 m) |
1 x | Crimping sleeves for cable 1.3 mm (10 pcs) |
1 x | Hot Glue Stick RED |
1 x | Battery RX JETI LiIon RB 2600 7.2v |
1 x | M3 Maxi ball link (2 uds) |
1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m |
1 x | Silicone red 0,5 qmm wire ( 25 m) |
3 x | Couple M4 for wire (10 pcs) |
1 x | Disposable Injector Bags (30x16cm) 100 pcs |
1 x | Walnut wood slat 3.0x3.0x1000 mm |
1 x | Short adjustable control horn 3x24 |
2 x | 2,4x1000 mm 2:1 red termoretract tube |
1 x | Set cintas unión paracaídas 145 cm |
1 x | Banna gold connector 2,5 mm (M/F) |
1 x | Spray Graphit 33 |
1 x | RM-130FSI 4-stroke inline gasoline airplane 3 cylinder |
1 x | Stainless steel cable Ø 0.62 mm (10 m) |
1 x | 10 mm gas motor standoff |
1 x | 38x4,5 mm wires output (2 pcs) |
1 x | PVC 0,14 qmm servos wire JR/Graupner (5 m) |
1 x | Allen wheel collar M4x6 |
1 x | Short ball link M2 (6 uds) |
1 x | 6,4x1000 mm 2:1 red termoretract tube |
2 x | Adapter 3,0 mm M6 for spinner 40 mm fixed propeller |
1 x | XT-60 connector (female) |
1 x | Aluminium red ball links M3 V1 (10 pcs) |
1 x | ABS tube 20.0x18.0x1000 mm |
1 x | Copper lacquer wire Ø0,2 mm (5 m) |
1 x | Flat washer 3.2 mm (20 pcs) |
1 x | Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm) |
1 x | Spannlack 1000 ml |
1 x | Glider Ka 7 Red (2540mm) |
1 x | Extension silicon 50 cm (Graupner) |
1 x | Carbon fiber rod 2.0 mmx1000 mm |
1 x | Ka-8b ELECTRIC 6000 mm ARF 1:2.5 (Phoenix Models) |
1 x | Copier 2x20 cm pcs |
4 x | Motor A2212/13T |
1 x | Fresa corte diamante Ø 2.3mm (bola) |
2 x | F450/550 Quadcopter, landing gear |
1 x | Profile ABS Square 3 x 1000 mm |
1 x | Protective Cover for wires Ø 6 mm 1000 mm |
1 x | Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m |
1 x | Carbon Fiber TeXtreme® 80 g/m² (plain) 100 cm, roll/ 10 m |
1 x | Spring lock washer 2.6 mm (20 pcs) |
2 x | Threaded coupler Micro M2 Ø 0,8 (10 pcs) |
3 x | Threaded coupler ALU Left M2,5 Ø 3 (2 uds) |
1 x | Green smoke canister 100 g |
1 x | Nylon hinge for flaps 33x9 (2 pcs) |
1 x | Connectors banana oro 6,0 mm Ultralight (M/F) |
1 x | 1/6 Pilot "Buddy" |
1 x | Lock washer 2.7 mm (20 pcs) |
1 x | Connectors banna oro 8,0 mm 5 pcs(Female) |
1 x | 1/12 Pilot "Cougar" |
1 x | Linden wood slat 3.0x3.0x1000 mm |
1 x | Cable set PREMIUM, fuselage/wing |
2 x | Opale Rucksack |
1 x | SHK 4000 mm Scale 1:4.25 |
1 x | Mahogany wood slat 1.5x1.5x1000 mm |
2 x | 3 mm Prop Adapter M6 |
1 x | ABS Strip 1.5x4.0x1000 mm |
1 x | FIALA Propeller 28x10 |
1 x | Streamline Stainless Steel Tubing 7.5x4.5x1000 mm |
1 x | Anodized alum. M4x0,7x20 mm Flat Head screw (4 lilac pcs) |
1 x | SE Ring 250 mm (2 pcs) |
1 x | Ply-Span 450x600/13g Black |
1 x | Streamline Stainless Steel Tubing 10.5x5.7x1000 m |
1 x | Chopped glass fibre strands 3 mm |
1 x | Clip fixing for wing (2 pcs) |
1 x | Militarian pilot "Kamikaze" size 9cm (Slimline) |
1 x | Clevis plastico I=44 mm / hole 3mm / pin 2 (2 pcs) |
1 x | VBar NEO |
1 x | A/C quality beech plywood 1520x750x4.0 mm |
3 x | Locking cable tie 4.6x203 (uds) |
1 x | Surprise XII Rudder (Freudenthaler) |
1 x | ASH 31 6.08m Composite Hollow Molded |
1 x | Blind nut M5 (10 pcs) |
1 x | Conector JR/Uni Servo male BLUE silicon (10 pcs) |
1 x | Battery RX JETI LiIon RB 5200 7.2v |
1 x | Dean-T Plug Mold |
1 x | SIMtransmitter 6 Mode 2 |
3 x | Threaded coupler ALU M2,5 Ø 3 (2 uds) |
1 x | Profile ABS half cane 4x1000 mm |
2 x | EXCITE S400 Pylon |
1 x | Paramotor Trike XL |
1 x | Straightened rod Ø 4.5 mm x 1000 mm |
1 x | Propeller RABOESCH M5 130 mm (4 Blades) (Right hydropropeller) |
2 x | Electric spoiler 250 mm (2 pcs) |
1 x | XH male balance (2S) connector (2 pcs) |
4 x | Threaded coupler ALU M2,5 Ø 6 (2 uds) |
1 x | Steel tube (L 1000 mm Ø5 mm, Ø4,7 mm) |
1 x | Civilian pilot "Pamela" size 9cm (Slimline) |
1 x | Fiberglass heat shield Ø 8 mm 1000 mm |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 100m |
1 x | Extension silicon 30 cm male (Futaba) |
1 x | Pilot "Anthony" (Slimline) |
1 x | Connectors banna oro 2 mm (M/F) (ultralight) |
1 x | White silicone 0,25 mm² wire (25 m) |
2 x | TAKEO 3.6m electric |
1 x | Extension silicon 25 cm (Futaba) |
1 x | TrainerCord (master-learner) |
1 x | ABS tube 3.0x2.0x330 mm |
1 x | DUPLEX USBa USB-Adapter for Jeti Duplex Items |
1 x | BALSA trip 2.0x10.0x1000 mm |
1 x | Propeller balancer |
1 x | Streamline Stainless Steel Tubing 15.5x8.5x1000 mm |
1 x | Conector FUTABA Servo male (10 pcs) |
1 x | Propeller 4BL 60 mm M4 plastic Left |
1 x | PVC 0,14 qmm servos wire Hitec/Mpx (5 m) |
2 x | Pilot JAN 1/4 Saiplanes |
1 x | SlowFlyer control horn (3 pcs) |
1 x | 3.17 mm Prop Adapter CN-Spinner |
1 x | FALCON 24X10 CARBON PROPELLER (GAS) |
1 x | Silicone black 0,5 qmm wire ( 1 m) |
1 x | CellPRO 4S Adaptader (GP/KO up to 4S) |
1 x | AX-60 starters (5 pcs) |
1 x | M3 Maxi ball link (2 uds) |
1 x | Yellow smoke canister 140 g |
1 x | Gates hinge aluminium (1 pcs) |
1 x | Carbon Non-Woven, 240 g/m² 100 cm x 2m |
1 x | Vacuum Connection VA 1 (for hose Ø 6 mm) |
1 x | SHK 4000 mm Scale 1:4.25, V-Tails |
1 x | Profile ABS triangular 2.0x1000 mm 90º |
1 x | Streamline Stainless Steel Tubing 11.5x6.5x1000 m |
1 x | Connectors banna oro 6,0 mm (M/F) |
1 x | 3l Smoke oil |
1 x | Hard brass tubing (L 1000 mm, Ø8.0 mm, Ø6.1 m) |
1 x | Adapter 3,0 mm M6 |
2 x | 3,0x60 mm allen screwdriver |
1 x | Oracover White 10 m |
2 x | 4 mm M3 red control terminal (4 pcs) |
1 x | Z Bender - S Type Tool |
1 x | Round Rod 6,0x1000 mm |
1 x | Nitroverdu 500 ml |
1 x | PPM Encoder Module |
1 x | Quicklock washer 2.5 mm (10 pcs) |
1 x | 18 mm reinforced hinge |
1 x | U Profile ABS 5,0x10,0x1000 mm |
2 x | Civilian pilot "Gramps" size 9cm (Slimline) |
3 x | 2 mm Prop Adapter M6 |
1 x | Carbon Non-crimp ST 200 g/m² 50 cm x 5 m |
1 x | Cabling for Fox MDM1 wings |
1 x | BALSA trip 5.0x5.0x1000 mm |
1 x | Balsa panel 6.0x100x1000 mm |
1 x | Carbon tube (L 1000 mm, Ø14 mm, Ø12 mm) |
1 x | Connectors banna oro 3 mm (M/F) |
1 x | Cabel charger transmitter GRAUPNER |
1 x | Jeti Black cap |
1 x | TS832 to Gopro AV/Power Cable DJI Phantom 2 Compatible |
1 x | BALSA trip 3.0x3.0x1000 mm |
1 x | Extension silicon 30 cm female (Futaba) |
1 x | Parachute P4 |
1 x | Propeller FALCON 32,5x11 PUSHER Carbono |
1 x | Swift S1 De-luxe JEPPESEN 3.140 mm |
1 x | Kwik link AL M3 con Clip (2 pcs) |
1 x | Flat washer 4.3 mm (20 pcs) |
2 x | Helices DJI Mavic Air STEALTH "Black" (4x Ud) |
1 x | M2,5 5Diam black ball link V2 (2 pcs) |
1 x | Ventus 2cx 4.5 m de Luxe |
2 x | 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
1 x | Digital weight, angle and balance meter BASIC |
1 x | Profile ABS half cane 7.0x1000 mm |
1 x | Yellow smoke canister 100 g |
1 x | 1/7 Pilot "Japanese" |
2 x | 1,6x1000 mm 2:1 black termoretract tube |
2 x | Electric spoiler 440 mm (2 pcs) |
1 x | Fresa corte diamante Ø 1.4mm (bola) |
1 x | Stainless steel cable Ø 0.88 mm - 60 kp (10 m) |
1 x | Horizontal cockpit anchor "tipe F3A" (2 pcs) |
1 x | Straightened rod Ø 5.5 mm x 1000 mm |
1 x | Dumper propeller 6/8 mm |
1 x | Brass hexagonal rod Ø 4 mm x 1000 mm |
1 x | Marker ties (20 pcs) |
2 x | 3 LiPo XH>EH adapter |
2 x | 3,2x1000 mm 2:1 red termoretract tube |
1 x | Balanceradapter JST-XH (Heli 47G) 2-6 c. |
1 x | Cinta Goldfix 1m |
1 x | Bateria DJI Mini 2 2250 mAh |
1 x | Connectors DEANS (T) |
1 x | Para-RC Trike "RC-Bullix" |
1 x | Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm |
1 x | CF tube set (Ø 38 mm y Ø 14 mm) |
1 x | ABS tube 9.0x7.0x1000 mm |
1 x | Piloto Jet "Green" 1/6 Scale |
1 x | Flap hinge (6 pcs) |
1 x | Large flex hinge (12 uds) |
1 x | Epoxy QUIK-CURE™ 5 min (260g) |
2 x | LUCAS pilot ARTF |
2 x | Aluminium cap bolt washer M4 red (8 pcs) |
1 x | Connector Sub-D 2+5 Female |
1 x | Carbon fiber flat 1000x3.0x0.5 mm |
1 x | MPX Sub-D Adaptor |
1 x | Balsa panel 5.0x100x1000 mm |
1 x | 140 mm rods + T patellas set for direction control |
1 x | Red copper lacquer wire Ø0,2 mm (5 m) |
1 x | Extension silicon 35 cm male (Futaba) |
1 x | BALSA trip 10x10x1000 mm |
1 x | Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm) |
1 x | Towing hook <3m |
2 x | 6,4x1000 mm 2:1 black termoretract tube |
1 x | Electric rocket starters (6 pcs) |
2 x | Big Crow DLE-170M |
1 x | Streamline Stainless Steel Tubing 6.3x3.5x1000 mm |
1 x | Small pinned hinge (12 uds) |
1 x | SE Ring 400 mm (2 pcs) |
2 x | Prop Shaft Adapter 5 mm/M8 "long" |
1 x | IKURA GPS 4.28 m |
1 x | servo adapter lead, JST-SH socket - JR male Pin, for GR-12SH+HoT |
1 x | Lock washer 3.2 mm (20 pcs) |
1 x | Ply-Span 450x600/13g White |
1 x | Cross Connector 4.0 mm x 1000 mm |
1 x | 5 line servos wire black (1 m) |
1 x | Strip ABS 2.0x8.0x1000 mm |
1 x | L-Connector 1.5 mm x 1000 mm |
1 x | Anodized aluminium servo M4x5/8 screw (4 blue pcs) |
1 x | Pin hinge 26x11 mm (10 uds) |
1 x | Extension silicon 10 cm (Futaba) |
1 x | Dremel PERMAGRIT thin lime |
1 x | Fox 4000 mm with flaps (Airwold) |
2 x | PC-21 XXL 3.395 mm |
1 x | VBar Control Touch, midnight black |
1 x | CF tube (L 1000 mm Ø0,7 mm, Ø0,3 mm) |
1 x | Flybar support metal LAMA |
1 x | Blue metalic ball link M3/3 azul (2 pcs) |
1 x | Q-12 X-light 2000 mm Electric |
1 x | Conector BEC female (10 pcs) |
1 x | Electric spoiler 300 mm (2 pcs) |
1 x | 25 mm Sandpaper file |
1 x | Profile ABS Square 2 x 1000 mm |
1 x | Oratex White 2m |
1 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m |
1 x | Anodized aluminium servo M3x16 screw (4 red pcs) |
1 x | ABS angle 10,0x10,0x1000 mm |
1 x | Rubber profile 6-2 mm 2M |
1 x | Ball link M3 (10 pcs) |
1 x | 4 mm Prop Adapter M8 |
1 x | Carbon fiber rod 6.0 mmx1000 mm |
1 x | Quicklock washer 4 mm (10 pcs) |
1 x | Hot Glue Stick GREEN |
1 x | Remote electric ignition system |
1 x | Carbon fiber rod 8.0 mmx1000 mm |
1 x | Canopy Lock V1 M3 Blue (2 pcs) |
1 x | Big-Malibu XL Roof box with surfboard rack GREY |
1 x | Swift S1 De-luxe 3.730 mm |
1 x | Swift S1 De-luxe 3.140 mm |
1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m |
1 x | Black smoke bombs AX-60 (5 pcs) |
2 x | 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
1 x | Walnut wood slat 1.5x1.5x1000 mm |
1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m |
1 x | Round Rod 5,0x1000 mm |
1 x | Carbon fiber rod 20 mmx1000 mm |
1 x | U Profile ABS 3,0x6,0x1000 mm |
2 x | 1/4 Pilot "Mike" |
1 x | Straightened rod Ø 5.0 mm x 1000 mm |
1 x | Oracover CARBON Metalic 1 m |
1 x | 15 mm reinforced hinge |
1 x | Conector FUTABA Servo female BLUE silicon (10 pcs) |
1 x | |
1 x | Conector JR/Uni Servo female BLUE silicon (10 pcs) |
1 x | Prolongador S-Bus JR/JR 10cm |
1 x | Civilian pilot "Curt" size 9cm (Slimline) |
1 x | Balsa panel 1.0x100x1000 mm |
1 x | Elevator VENTUS 2cx 4.5m |
1 x | Joint with bearing M2 22x5,5 |
1 x | M2,5 Diam metal ball link V3 (2 pcs) |
1 x | Lipo RO-POWER Ultra MAX 2300 mAh 14.8v 35c |
1 x | A/C quality beech plywood 600x300x0.8 mm |
1 x | Oracover Red 2 m |
1 x | Junta humo metalica G35 DLE35 |
1 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll |
1 x | Carbon Non-Woven, 160 g/m² 127 cm 5m |
1 x | A/C quality beech plywood 498x247x2.0 mm |
1 x | Extension silicon 100 cm (Futaba) |
1 x | Vertical cockpit anchor "tipe F3A" (2 pcs) |
1 x | Brass rod Ø 0.8 mm x 1000 mm |
1 x | Straightened rod Ø 0.5 mm x 1000 mm |
1 x | Paramotor BackPack XXS (without accessories) |
1 x | Balsa panel 8.0x100x1000 mm |
1 x | Conector FUTABA Servo male BLUE silicon (10 pcs) |
1 x | Carbon tube (L 1000 mm, Ø4 mm, Ø2,5 mm) |
1 x | Steering arm 12 mm Ø 4 mm |
1 x | Black spiral protective cover for wires Ø 0,5/50 mm - 25 m |
2 x | Cable coupler M2 (10 uds) |
1 x | Prolongador S-Bus JR/JR 20cm |
2 x | 6,4x1000 mm 2:1 blue termoretract tube |
1 x | Round Rod 1,0x1000 mm |
1 x | 2000A 12V Lithium Jump Starter with 150PSI Air inflator |
1 x | Junta humo metalica G61 (DLE55RA/DLE61/DLE120) |
1 x | Landing gear Rocket 400 |
1 x | Extinguisher CO2 - 2 Kg |
1 x | ABS angle 5,0x5,0x1000 mm |
1 x | Kwik link AL M3 L:23 mm (2 pcs) + Pin Ø 1,6 mm |
1 x | Connector Sub-D 2+5 Male |
1 x | PVC 0,08 qmm Futaba servos wire (5 m) |
1 x | Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH |
1 x | Propeller AERO-NAUT M4 45 mm (3 Blades pr) (Right hydropropeller |
1 x | LS-8 GFK 6m Glider |
1 x | Carbon fiber rod 0.5 mmx1000 mm |
1 x | Cabel "Y" 30 cm (Futaba) |
1 x | Pine wood slat 1.5x3.0x1000 mm |
1 x | Baffles for Radial Moki S250/330 mm |
1 x | A/C quality beech plywood BIRCH 600x300x1.0 mm |
2 x | Canopy Astra |
1 x | Motor DLE 40 cc Twin |
1 x | Profile ABS half cane 4x2.5x1000 mm |
1 x | Fabric scissors curved Premium, 16 cm / 6" length |
1 x | Cable servo PREMIUM 1 m (blanco/rojo/negro) AWG21 + AWG26 TPE |
1 x | Flat washer 2.7 mm (20 uds)pcs) |
1 x | Steering arm 16 mm Ø 4 mm |
1 x | Blue silicone 0,5 qmm wire (50 m) |
1 x | EC5-Set male, simple quality, 2 x female pin, 1 x blue housing |
1 x | ABS tube 12.0x10.0x1000 mm |
1 x | Wing connector 8pin with pin strip, plug & socket |
1 x | Parachutist |
1 x | XT-30 connector (pair) |
1 x | Ventus 2cx 4.5 m Cabling wings |
1 x | ABS tube 14.0x10.0x1000 mm |
2 x | 4 mm Prop Adapter M8 |
1 x | Spray adhesive INFUTAC (Clear) 500 ml |
1 x | 1/12 Pilot "Fighter" |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 50m |
2 x | Mahogany wood slat 3.0x3.0x1000 mm |
1 x | Cable grommet Ø 6.4 mm (4 uds) |
1 x | Pilot "Adolf" Legends Series (Slimline) |
1 x | Vacuum pump P1-N |
1 x | Cable grommet Ø 5 mm (4 uds) |
1 x | Digital scale up to 40 kg |
1 x | Aluminium blue ball links M3 V1 (10 pcs) |
3 x | Threaded coupler ALU M3 Ø 5 (2 uds) |
1 x | Smoke set "S" |
1 x | 48 mm cylidric hinge Ø 2,5 mm (5 pcs) |
1 x | Buy Perforated film 100 cm / 10 m |
1 x | Oracover Black 2 m |
1 x | |
2 x | 4,8x1000 mm 2:1 blue termoretract tube |
1 x | Carbon tube (L 1000 mm, Ø16 mm, Ø14 mm) |
1 x | Blind nut M5 (4 pcs) |
1 x | "M" set |
1 x | Brass hexagonal rod Ø 3.5 mm x 1000 mm |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m |
1 x | Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm |
1 x | Ball link duraluminium M3 V1 (10 pcs) |
1 x | Towing hook |
1 x | Balsa panel 4.0x100x1000 mm |
1 x | Mahogany wood slat 2.0x2.0x1000 mm |
1 x | Brass rod Ø 1.5 mm x 1000 mm |
1 x | Protective Cover for wires Ø 20 mm 1000 mm |
1 x | Canopy Lock V1 M3 Red (2 pcs) |
1 x | Futaba Female 40 cm extension |
1 x | Conector JR Servo male (10 pcs) |
1 x | Ball link M3 (10 pcs, flat ball) |
1 x | Straightened rod Ø 4.0 mm x 1000 mm |
1 x | L-Connector 4.0 mm x 1000 mm |
2 x | 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
1 x | Adjustable launching hook |
4 x | Threaded coupler ALU M2,5 Ø 4 (2 uds) |
1 x | Carbon fiber flat 1000x3.0x1.0 mm |
1 x | Zurich Sport Sunglasse Dark Sensity BROWN Glasses |
1 x | Fiberglass heat shield Ø 6 mm 1000 mm |
1 x | Connectors banna oro 2 mm (M/F) |
1 x | Long ball link M2 (6 uds) |
1 x | Spring lock washer 3.1 mm (20 pcs) |
1 x | Tirpiz Battleship 1:200 |
1 x | Extractor piñones 2.3/3.2 mm |
1 x | Conector JR Servo female (10 pcs) |
1 x | Silicon black 2,5 qmm cable ( 25 m) |
1 x | Rubber profile 8-2 mm 2M |
1 x | Cabin latch Fox MDM1 4m (pair) |
1 x | LO 100 ARC 3.3m |
1 x | Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm) |
1 x | Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH |
1 x | 1/12 Pilot "Tom" |
1 x | Glases Moritz |
1 x | Cable silicona macho batt. receptor 30 cm (Futaba) |
1 x | Steering arm 12 mm Ø 3 mm (2 uds) |
1 x | ABS angle 2,0x2,0x1000 mm |
1 x | X-RAY Micro QR (Tail Tube) |
1 x | X-RAY Micro QR (Elevator) |
1 x | BALSA trip 6.0x6.0x1000 mm |
1 x | Profile ABS half cane 8.0x1000 mm |
1 x | 2,3 mm Prop Adapter M6 |
1 x | Z type of cable coupler Ø 1 (2 uds) |
1 x | Profile ABS triangular 4.0x1000 mm 60º |
3 x | Silent-blocks DLE 170M |
1 x | Steel tube (L 1000 mm Ø3 mm, Ø2,7 mm) |
1 x | FunCub NG verde RR |
1 x | Junta humo metalica G85 (DLE85/DLE170) |
1 x | U Profile ABS 2,0x4,0x1000 mm |
1 x | Ply-Span 450x600/13g Blue |
1 x | Carbon fiber rod 14 mmx1000 mm |
1 x | Kobuz 5000 mm (Airwold) |
1 x | Digital Air Speed Sensor And Pitot Tube Set |
1 x | Wing OXY 5,0 m2 |
1 x | Carbon fibre tape 200 g/m² (unidirectional) 50 mm |
1 x | Protective Cover for wires Ø 15 mm 1000 mm |
1 x | 2 mm female connector (2 pcs) with safety connector |
1 x | Conector JR Servo male (10 pcs) |
1 x | Oracover Azul Cielo 2 m |
2 x | 1/6 Pilot "Tony" |
2 x | Steering arm 16 mm Ø 3 mm |
1 x | Steering arm 16 mm Ø 4 mm (2 uds) |
1 x | Black silicone 1,0 qmm wire (50 m) |
1 x | Oratex Natural White 2m |
1 x | Extension silicon 35 cm (Futaba) |
1 x | Aluminun wheel collar 2.5 mm Ø (4 uds) |
2 x | 3,2 mm Prop Adapter M6 |
1 x | Propeller APC 9x6 Glow/Gas |
1 x | Socket head long ball link M3 (6 uds) |
1 x | Dean "T" - Futaba Adapter |
1 x | White smoke bombs AX-3 (10 pcs) |
1 x | ABS I Strip 10x5x1000 mm |
1 x | Ball Link Plier |
1 x | Paramotor BackPack XXS 2 |
1 x | PC-21 2.880 mm RED |
1 x | LiPo TopFuel ECO-X 2400mAh 4s 35C MTAG |
1 x | Connectors banna oro 4 mm (M/F) (ultralight) |
1 x | Spray EC Red 400ml |
1 x | SOLOFOX 5m Voll-GfK |
1 x | Pin type hinge Al 4,5x70 mm to wire (2 pcs) |
1 x | ABS tube 5.0x4.0x156 mm |
2 x | Aluminium wide washer M4 Blue (4 pcs) |
1 x | SC NAVY V15R |
1 x | LIBELLE Standard 3.8m D-box H-201 |
1 x | 68 mm PVC transparent battery termo-retract 68 mm (1 m) |
1 x | Carbon tube (L 1000 mm, Ø2 mm, Ø1 mm) |
1 x | Stick coupler Ms 15 mm |
1 x | Pin hinge 39x20 mm (10 uds) |
1 x | Carbon fiber rod 3.0 mm x 1000 mm |
1 x | MAX pilot ARTF |
1 x | Fast'n EZ-CA-Hinge (12 uds) |
1 x | T-shape holder metal LAMA |
1 x | Conector Servo female 4 pines |
1 x | Swashplate metal LAMA |
1 x | Prop Shaft Adapter 6 mm/M8 "long" 35 mm |
1 x | "S" set for boats |
1 x | Cut tube |
1 x | Carbon fiber rod 1.5 mm x 1000 mm |
1 x | 1000 ml sealer (DOPE) |
1 x | Silicone 0,35 qmm servos cable Futaba (5 m) |
1 x | Carbon fiber flat 1000x6.0x0.8 mm |
1 x | Quicklock washer 3 mm (10 pcs) |
1 x | Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna |
1 x | Anodized alum. M4x0,7x25 mm Button Head screw (4 blue pcs) |
1 x | Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH |
1 x | ABS Strip 1.0x3.0x1000 mm |
1 x | Micro screw-lock pushrod conn snap Ø 1 mm (2 uds) |
2 x | 3,2 mm Prop Adapter M6 |
1 x | Pin type hinge Al 4,5x70 mm (2 pcs) |
1 x | Starter Sullivan-STAR 601 |
1 x | SATORI 2 PRO V C64 F5J |
1 x | Spray adhesive AEROFIX 2 |
1 x | CC 02 |
1 x | 6 mm ball link M3 (10 pcs) |
1 x | LO 100 Scale 1:2 - Modellbau Bruckmann |
1 x | Nylon hinge for flaps/gates 27x10,5 (2 pcs) |
2 x | Stickers-digit for marking |
1 x | Propeller POWER-PROP 7x7 |
2 x | APM2.6 Power module with 5.3V DC BEC |
1 x | Nylon hinge 15x0,3 (10 pcs) |
1 x | Long ball link M3 (6 uds) |
1 x | Extension silicon 10 cm (Graupner) |
1 x | 500 ml sealer (DOPE) |
1 x | Red smoke bombs AX-60 (5 pcs) |
1 x | JR silicone servo wire 0,35 qmm / 5m |
1 x | BALSA trip 8.0x8.0x1000 mm |
1 x | Solvent Plasti Dip 1000 ml |
1 x | Profile ABS half cane 6.0x1000 mm |
2 x | 2,4x1000 mm 2:1 black termoretract tube |
1 x | Monokote PLATINO metalizado (1.8x0.65m) |
1 x | Futaba S-Bus Rx/Gyro Link Lead |
1 x | Tube Pitot to PIXHAWK |
1 x | ABS Strip 1.5x8.0x1000 mm |
1 x | Cabel "Y" 30 cm (graupner) |
1 x | La Capitania di Venetia accesories |
1 x | SAGITA Alsema 4.0 m |
1 x | TP/TopFuel - JST-EH 4/5S Adapter |
1 x | LH long black aluminium horn L31xH30 (2pcs) |
1 x | ABS tube 4.0x3.0x1000 mm |
1 x | Gracia Maxi ARF, spare wings (Top Model) |
1 x | 14x60 mm Mini rings Tie Wraps (4 pcs) |
1 x | 1/4 Pilot "Heidi" |
1 x | Propeller AERO-NAUT M4 45 mm (3 Blades pr) (Left hydropropeller |
1 x | Brass hexagonal rod Ø 5 mm x 1000 mm |
2 x | Starter EM Gear Power 250 |
2 x | 3.2 mm Prop Adapter M8 |
1 x | Lock washer 4.3 mm (20 pcs) |
1 x | Silicone 0,25 qmm servos wire Graupner (100 m) |
1 x | Monokote BLUE metalizado (1.8x0.65m) |
1 x | Red smoke canister 65 g |
1 x | Carbon tube (L 1000 mm, Ø10 mm, Ø8 mm) |
1 x | Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs) |
1 x | 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs) |
1 x | Socket head long ball link M3 (2 uds) |
1 x | ESC YGE 205 HVT BEC |
2 x | 4,8x1000 mm 2:1 black termoretract tube |
1 x | 5 mm Prop Adapter M8 |
1 x | Parachute PV6 for F3J |
2 x | 6 mm Prop Adapter M8 |
1 x | Flat washer 2.2 mm (20 pcs) |
1 x | TP/TopFuel - XH 2/3S Adapter |
1 x | FESTO connector 1/8 Quick 6mm 90º |
1 x | Servo NARO Max Std |
2 x | SCHARNHORST accessories |
1 x | 0,14 mm PVC servo wire extension, ZH micro conector. |
1 x | ABS tube 3.0x1.0x1000 mm |
1 x | Fox MDM 1 4000 mm DeLuxe,Fundas deLuxe |
1 x | Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds) |
1 x | Crimping sleeves for cable 0.70 mm (10 pcs) |
1 x | Threaded coupler Micro M2 Ø 0,8 mm (10 pcs) |
1 x | ABS angle 4,0x4,0x1000 mm |
1 x | ABS tube 8.0x7.0x1000 mm |
1 x | Silicone red 0,75 qmm wire ( 25 m) |
1 x | M2/M1/6 3Diam short black ball link V1 (2 pcs) |
1 x | Carbon fibre sandwich sheet 350x150x3 mm |
1 x | Junta humo metalica G30 (DLE30/DLE60) |
1 x | A/C quality beech plywood 600x300x5.0 mm |
1 x | Connectors banna oro 0,8 mm (M/F) |
1 x | M2,5 / 5Diam metal short ball link V3 (2 pcs) |
1 x | Long pinned hinge (12 uds) |
1 x | Shaft sleeve LAMA |
1 x | PVC 0,25 qmm 4 line servos wire JR/Graupner (5 m) |
1 x | 6 mm Prop Adapter M8 |
1 x | M3 black washers (4 pcs) |
1 x | Threaded coupler M2 (10 uds) |
1 x | Screw-lock connector Ø 2 mm (2 uds) |
1 x | Sealing Iron Sleeve PROF |
1 x | Straightened rod Ø 6.0 mm x 1000 mm |
1 x | Propeller CFK 20x13 "white" |
1 x | 3,2 mm Prop Adapter M8 |
3 x | 4 mm Prop Adapter CN-Spinner |
1 x | ABS angle 3,0x3,0x1000 mm |
1 x | Carbon Non-crimp ST 200 g/m² 50 cm x 20 m |
1 x | Cylidric hinge 43 mm Ø 2,5 mm (5 pcs) |
1 x | 45 mm rods set for direction control |
1 x | DPS Switch JR/JR |
1 x | Fabric scissors curved (offset handles), 16 cm / 6" length |
1 x | X-RAY Micro QR (Fuselage with canopy) |
1 x | Kwik link AL M3 L:40 mm (2 pcs) + Pin Ø 2,5 mm |
1 x | Streamline Stainless Steel Tubing 19.5x9.8x1000 mm |
1 x | Extension S-Bus 1-2 silicon 120 cm FUTABA |
1 x | Anodized aluminium M3x0,5x20 mm Sokect Head screw (4 lilac pcs) |
1 x | Plastic caps for AIR BURTS (30 pcs) |
1 x | Monokote BLANCO jet (1.8x0.65m) |
1 x | Carbon fiber rod 2.5 mmx1000 mm |
1 x | USB HLS prog. interface |
2 x | 165 mm PVC transparent battery termo-retract 165 mm (1 m) |
2 x | Adapter 5,0 mm M8 |
1 x | Conector JR Servo female (10 pcs) |
2 x | Adapter 2,3 mm M5 for spinner 30 mm fixed propeller |
1 x | XT-60 connector (male) |
1 x | Brass rod Ø 1.0 mm x 1000 mm |
2 x | 3,2x1000 mm 2:1 black termoretract tube |
1 x | BALSA triangular 6x6x1000 mm |
1 x | Blue metalic ball link M2/2 azul (2 pcs) |
1 x | Green silicone 0,25 mm² wire (25 m) |
1 x | M2,5 Diam metal short ball link V3 (2 pcs) |
1 x | Glases Ace |
1 x | BALSA trip 4.0x4.0x1000 mm |
1 x | Strip 1,5x1,5x330 mm |
1 x | Anodized alum. M4x0,7x20 mm Flat Head screw (4 blue pcs) |
1 x | Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm) |
1 x | Propeller 4BL 60 mm M4 plastic Right |
1 x | Carbon Non-Woven, 240 g/m² 100 cm x 20 m |
2 x | Cable coupler M2x66 (2 uds) |
1 x | Buy Perforated film 100 cm / 50 m |
1 x | Glases Innovation Plus |
1 x | Blade holder metal LAMA |
1 x | Steering arm 16 mm Ø 3 mm (2 uds) |
1 x | 1/6 Pilot "Cindy" |
2 x | 4,8x1000 mm 2:1 red termoretract tube |
1 x | Flap hinge 33x9 mm (6 pcs) |
1 x | Surface Indicator Gauge Small |
1 x | M2,5 5Diam metal ball link V3 (2 pcs) |
1 x | Carbon fiber rod 1.5 mm x 2000 mm |
1 x | Quicklock washer 1.5 mm (10 pcs) |
1 x | Grafas ARF 3.0 m (Top Model) |
1 x | Indoor hinge with servo arm integraded |
1 x | Oracover White 2 m |
1 x | Walnut wood slat 2.0x2.0x1000 mm |
1 x | Futaba Female 40 cm extension |
1 x | Yellow smoke bombs AX-60 (5 pcs) |
1 x | Rubber profile 10-2 mm 2M |
1 x | DISCUS 2A De Luxe 3.750 mm (Topmodel) |
1 x | Stainless steel cable Ø 0.5 mm (10 m) |
1 x | 12 mm portholes (10 pcs) |
2 x | SE Ring 300 mm (2 pcs) |
1 x | ABS 500 x 400 x 2,0 mm (white) |
1 x | 6,4x1000 mm 2:1 green termoretract tube |
1 x | Profile ABS half cane 2.0x1000 mm |
2 x | Adapter 5,0 mm M6 for spinner 40 mm fixed propeller |
1 x | Wing OXY 0,5 pulgadas2 |
1 x | Nylon hinge 20x15x0,3 (10 pcs) |
1 x | Anodized aluminium M3x0,5x20 mm Sokect Head screw (4 blue pcs) |
1 x | Helices DJI Mavic Air 2 STEALTH "Black" (4x Ud) |
1 x | Extension silicon 100 cm (Graupner) |
1 x | Thinwall Stainless Steel Tubing 28x0.6x1000 mm |
1 x | 19 mm 2:1 black termoretract tube |
1 x | M3-M4 rubber washer (8 pcs) |
1 x | 3 copper lacquer wire Ø0,2 mm (1 m) |
2 x | 2,3 mm Prop Adapter M5 |
1 x | 41x5,5 mm wires output (2 pcs) |
1 x | Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm |
1 x | DG-303 ACRO 3750 mm (Airworld) |
1 x | Astra (Top Model) |
2 x | Aluminium cap bolt washer M3 black (8 pcs) |
1 x | Aero-Master Cabine (Aero-naut) |
1 x | AX-60 starters (5 pcs) |
1 x | Fast'n EZ-CA-Hinge, lite (12 uds) |
1 x | BEC 3A FOXY |
1 x | Cable grommet Ø 4 mm (4 uds) |
1 x | Aluminun wheel collar 5 mm Ø (4 uds) |
1 x | XH/XH 30 cm Female extension 0,25 mm2 silicone cable for 4 cell |
1 x | Clevis plastico I=30 mm / hole 2.5mm / pin 1 (2 pcs) |
1 x | Truck-trailer for gliders 720 x 285 mm |
1 x | Buy Perforated film 100 cm / 20 m |
2 x | 20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
1 x | FunCub NG azul RR |
1 x | Yellow smoke canister 65 g |
1 x | Junta humo metalica G20 (DLE20/DLE20RA/DLE40) |
1 x | silicon 100 cm Futaba Extension Ø 0,35 mm |
1 x | Streamline Stainless Steel Tubing 14.5x9.6x1000 mm |
1 x | A/C quality beech plywood 498x247x1.2 mm |
1 x | Gold antispark 4 mm plug |
1 x | "Y" charging 4mm wire (2 IN-1 OUT). |
2 x | 6 mm Quick clamp_S (10 pcs) |
1 x | Q-12 2000 mm Electric |
1 x | Propeller balancer |
2 x | OBECHI sheet 2.0x3.0x1000 mm |
1 x | ABS Strip 1.5x2.0x1000 mm |
1 x | Reed valve petal for DLE 120 |
1 x | Aluminun wheel collar 3 mm Ø (4 uds) |
1 x | Prop Shaft Adapter 5 mm "long" |
1 x | Cap closure 33/23.5mm (2 uds) |
1 x | |
1 x | Aluminium M2x12 mm screw (4 pcs) |
1 x | A/C quality beech plywood 1520x750x3.0 mm |
1 x | ASK 21 6.5m + pylona |
1 x | Strip 2,0x2,0x330 mm |
1 x | Small aluminium horn red (2pcs) |
1 x | Round Rod 3,0x1000 mm |
1 x | Profile ABS triangular 6.0x1000 mm 90º |
1 x | Plasti Dip Liquid Tape 429 ml orange |
1 x | Round Rod 1,5x1000 mm |
1 x | Gold antispark 5,5 mm plug |
1 x | Pin type hinge Al 4,5x70 mm demount (2 pcs) |
1 x | Steel tube (L 1000 mm Ø6 mm, Ø5,7 mm) |
1 x | Propeller APC 10x6 Glow/Gas |
1 x | Oracover Verde 2 m |
1 x | Medium pin type hinge (12 uds) |
1 x | ABS 500 x 400 x 1 mm (white) |
1 x | Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm) |
2 x | 1,2x1000 mm 2:1 red termoretract tube |
1 x | Vasa model Catapult |
1 x | Conector BEC male (10 pcs) |
1 x | CM-3 |
1 x | Filter KingTech |
1 x | ABS tube 7.0x5.0x1000 mm |
1 x | Fresa corte diamante Ø 2.35mm (lentil) |
1 x | Blind nut M2 (10 pcs) |
1 x | Extension silicon 30 cm male (Graupner) |
1 x | Exhaust pipe BX 155 Right |
1 x | Protective Cover for wires Ø 10 mm 1000 mm |
1 x | Cockpit plastic closing |
1 x | Straightened threaded rod M2-1m |
1 x | Stainless steel cable Ø 0.5 mm (2 m) |
1 x | Painting GHT Lexan Black 150 ml |
1 x | Connectors banna oro 4 mm (M/F) |
1 x | Carbon tube (L 1000 mm, Ø18 mm, Ø16 mm) |
1 x | Stainless steel cable Ø 0.52 mm - 15 kp (10 m) |
1 x | White smoke canister 65 g |
1 x | Streamline Stainless Steel Tubing 12.3x7.7x1000 mm |
1 x | Slave-cable USB Easy Sim |
1 x | Pilot "Dick" Legends Series (Slimline) |
1 x | 76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
2 x | SE Ring 360 mm (2 pcs) |
1 x | Cable silicona macho batt. receptor 30 cm (Graupner) |
1 x | Short ball link M1.6 (6 uds) |
1 x | Oracover Green10 m |
1 x | Blind nut M6 (4 pcs) |
2 x | Adapter 3,0 mm M8 |
1 x | Blind nut M8 (10 pcs) |
2 x | Cable coupler M3 (10 uds) |
1 x | Carbon fiber rod 10 mm x 1000 mm |
1 x | Extension S-Bus 1-2 silicon 30 cm FUTABA |
1 x | Anodized aluminium servo M4x5/8 screw (4 lilac pcs) |
1 x | PVC 0,08 qmm Graupner servos wire (5 m) |
1 x | CC 05 |
1 x | Blind nut M4 (4 pcs) |
1 x | M2/M1/6 3Diam long black ball link V1 (2 pcs) |
1 x | MG cannon 1.8 cm (5 pcs) |
1 x | Vacuum pump 12 CFM |
1 x | PowerPack 2.5X2 PRO |
1 x | P 17×5.8 Prop-2PCS/PAIR |
2 x | Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs) |
1 x | Concave-Convex sandpaper file 13 mm |
1 x | Straightened rod Ø 3.0 mm x 1000 mm |
1 x | Oracover Brown 2 m |
1 x | Carbon fibre sleeve 12k 170 mm x 5m |
2 x | 2 LiPo XH>EH adapter |
1 x | Steel tube (L 1000 mm Ø12 mm, Ø11,7 mm) |
1 x | Ventus 1:4 set of instruments |
1 x | Hovercraft sailcloth |
1 x | Oracover Yellow CADMIO 10 m |
1 x | F-16 Scale 1/6 G3 Airex Deco: AF 916F |
1 x | ABS tube 10.0x8.0x1000 mm |
1 x | SPS 70V 100/200 A |
1 x | Crimping tool |
1 x | Universal Colour Paste deep black 250 g |
1 x | P-47 Thunderbolt ARF 2075 mm (Black Horse) |
1 x | Fresa corte diamante Ø 1.0mm (bola) |
1 x | SUS wire 3m (nylon coated) |
2 x | 105 mm PVC transparent battery termo-retract 68 mm (1 m) |
1 x | 37 mm PVC transparent battery termo-retract (1 m) |
1 x | Kwik link aluminio IZD. M3 L: 30mm (2 uds) pin Ø 2 mm |
1 x | Round Rod 4,0x1000 mm |
1 x | 6 mm hexagonal ball link M3 (10 pcs) |
1 x | Anodized aluminium servo M4x5/8 screw (4 silver pcs) |
2 x | Horn DU-BRO 1/2 (2 pcs) |
1 x | Cockpit aluminium closing |
1 x | SCHARNHORST Battleship 1:200 |
1 x | Black 2,4 GHz antenna exit guides (2 pcs) |
1 x | Fox MDM 1 4000 mm Std. |
1 x | Fresa corte diamante Ø 2.35mm (flame) |
1 x | 1/10 Pilot "Jack" |
1 x | ABS I Strip 20x10x1000 mm |
1 x | Plasti Dip Liquid Tape 429 ml black |
2 x | DG-303 ACRO 3750 mm, winglets |
1 x | Tube bender |
1 x | U Profile ABS 8,0x4,0x1000 mm |
1 x | Zurich Sport Sunglasse Dark Sensity MAGENTA Glasses |
1 x | 2.3 mm Adapter for 30 mm spinners |
1 x | Yellow silicone 0,5 qmm wire (50 m) |
1 x | Silicone black 0,75 qmm cable ( 1 m) |
1 x | A/C quality beech plywood 600x300x1.5 mm |
2 x | 2,3 mm Prop Drive Günther M4 |
1 x | Antena FUTABA receptor Standard 2.4 GHz ( 200 mm aprox.) |
1 x | LiPo TopFuel ECO-X 5000 mAh 3s 20C MTAG |
1 x | Ring 320 mm length (5 pcs) |
1 x | 3,9 mm ZG20-ZG38 servo arm |
1 x | Tape GFK 50 mm |
1 x | SE Ring 240 mm (2 pcs) |
1 x | 20x200 mm battery rings |
1 x | |
1 x | RUDDOG Protection and Heat Shield Tape (2mx50mm) |
1 x | SE Ring 480 mm (2 pcs) |
1 x | Screw M4x20 (10 pcs) |
1 x | Conexion PREMIUM MAXI fuselaje/alas 200 cm one4one |
1 x | Socket Screw M2x3 mm (4 pcs) |
1 x | 3 mm Long Prop Adapter M5 |
2 x | Blades 330mm |
1 x | Turnbuckle M2x29/43 (2pcs) |
1 x | Cierva C30 Elevator |
1 x | wire tensioner (blue) |
1 x | Cierva C30 simulated motor |
1 x | SCANNER 46-55 Sport Scale 1:7 ARF |
1 x | Receiver CORE PBR-26D 26ch |
1 x | Raer wall |
1 x | Silicone adhesive ELASTOSIL® E4, tube/ 90 ml |
1 x | Titanium M3x0,5x6 mm Flat Head screw (4 pcs) |
1 x | JETI SPIN 80 Pro |
1 x | Cierva C30 spanish decoration Stickers |
1 x | Pulley brass 2,5/1 (2 pcs) |
1 x | Tapping Screw M2.9x9.5 (10 pcs) |
1 x | PARAGON Trainer 46-55 1580 mm |
1 x | Turnbuckle M1,6x20/30 (2pcs) |
1 x | 2,0x50 mm allen screwdriver |
1 x | Electric spoiler 185 mm (2 pcs) |
1 x | Head lower part New |
1 x | Socket Head Screw M2x10 |
1 x | Turnbuckle M3 33x49 (2pcs) |
1 x | Turnbuckle M2,5x27/43 (2pcs) |
1 x | 3 mm Short Prop Adapter M5 |
1 x | FesEx-Uni6 System |
1 x | Wheel keeper washer |
1 x | Ball joint long |
1 x | Adapter 3,2 mm M6 for spinner 40 mm fixed propeller |
1 x | Cable set Premium™ MAXI "one4two" |
1 x | Glow starter with charger 230v |
1 x | Head core bushing |
1 x | Universal Colour Paste deep black 50 g |
1 x | Screw M3x8(10 pcs) |
1 x | Pulley brass 4/1,5 (2 pcs) |
1 x | Complet landing gear |
1 x | Sliding window 1:2,4 / 1.2,6 Scale |
1 x | Screw M3x16 |
1 x | Nut M1,6 |
1 x | Set clevis for pull-pull (TY13233 & TY13234) |
1 x | 2,4x1000 mm 2:1 green termoretract tube |
1 x | Head runner |
1 x | Turnbuckle M1,6x17/27 (2pcs) |
1 x | Screw M4x12 (10 pcs) |
1 x | 2,5x60 mm allen screwdriver |
1 x | Servo Fork |
1 x | Screws flush mount M2 |
1 x | 58 mm PVC transparent battery termo-retract 68 mm (1 m) |
1 x | VARIO module Hott |
1 x | Bearing 3x6x2,5 |
1 x | 22 mm Cut Disc Proxxon/Dremmel |
1 x | wire tensioner (silver) |
1 x | Blade holder lower |
1 x | BOOMERANG II 40/46 ARF 1.55mm |
1 x | Pulley brass 6/1,5 (2 pcs) |
1 x | Tapping Screw M2.2x13 (10 pcs) |
1 x | wire tensioner (black) |
1 x | Pulley brass 16/2 (2 pcs) |
1 x | Porta Kwik link M4 3 mm (2 pcs) |
1 x | PC-6 Pilatus Porter Big "Fredi" (PICHLER) |
1 x | Adapter 4,0 mm M8 |
1 x | Threaded coupler ALU M2 Ø 3 (2 uds) |
1 x | DOMINO 46-55 Trainer 1583 mm |
1 x | Threaded insert M3 (4 pcs) |
1 x | Wire easy tensioner (silver) |
1 x | Porta Kwik link M4 4 mm (2 pcs) |
1 x | Cessna SKYLANE T182 1.75m - Seagull Model |
1 x | Receiver GRAUPNER GR-16 HoTT |
1 x | Screws M1,6x6 Allen |
1 x | Adapter 3,2 mm M8 |
1 x | Servo GO-1073MGW 32 kg.cm 0.135s/60º |
1 x | Wire easy tensioner (red) |
1 x | Head lower part |
1 x | Screw M3x30 (10 pcs) |
1 x | SHOCK CUB 102" 2.600 mm 38-50cc YELLOW (Seagull Models) |
1 x | Balls 4 mm |
1 x | Receptor GRAUPNER GR-24 HoTT |
1 x | Socket Head Screw M2x8 |
1 x | Blade holder upper |
1 x | PC-6 Pilatus Porter Big "Tiger" (PICHLER) |
1 x | Titanium M3x0,5x12 mm Flat Head screw (4 pcs) |
1 x | Screw M4x30 (10 pcs) |
1 x | CARBON CUB FX-3 100-200CC ARF, 165" - 4200 mm (Hangar9) |
1 x | Baering 3x8x4 |
1 x | 2 mm Prop Adapter M5 |
1 x | Receiver GRAUPNER GR-12 HoTT |
1 x | Cierva C30 Body Spain |
1 x | Screw M3x20 (10 pcs) |
1 x | BULLIT Wing 1095 mm |
1 x | 20 g tin paste |
1 x | Threaded insert M5 (10 pcs) |
1 x | Tapping Screw M2.2x65 (10 pcs) |
1 x | SyRen 50A 6V-30V Regenerative Motor Driver |
1 x | Threaded insert M6 (10 pcs) |
1 x | BULLIT Wing 840 mm |
1 x | Pull-Pull complet set with CF rudder double servo arm |
1 x | Pulley brass 14/2 (2 pcs) |
1 x | Motor Moki 180 |
1 x | Sun Cover ULTIMATUM 2.0 (Hispano Aviacion) |
1 x | Motor Moki S 500 cc 5 cylinders |
1 x | Moki Pushrod S250 (1 pcs) |
1 x | Straightened rod Ø 7.0 mm x 1000 mm |
1 x | Landing gear retract neumatic (Jet Legend) |
1 x | ASK 21 6.8m |
1 x | METEOR 1.000 mm kit |
1 x | Motor Moki S 250 cc 5 cylinders |
1 x | Motor MOKI 160 BVT boxer 4-stroke |
1 x | Air filter MOKI |
1 x | 460 mm EPP Floats |
1 x | Moki Exhaust Bend 50VT |
1 x | Quadcopter Q50 Kit Carbon Fiber |
1 x | Sun Cover BULL Mo1 2.6 (Hispano Aviacion) |
1 x | Fox 4000 mm Airworld,cabina |
1 x | Moki Exhaust Bend 200 mm |
1 x | Fox 4000 mm Airworld,canopy frame |
1 x | Motor Moki S 400 cc 5 cylinders |
1 x | Spare Part Frame Set for EACHINE RACER 250 |
1 x | Suncover 100cc Red |
1 x | Cooler motor type 400 |
1 x | Aluminium wide washer M4 Gold (4 pcs) |
1 x | Transmitter Cadet 4Ch (V3) 2,4 GHz Mod.2 |
1 x | Aluminium ignition bad (red) |
1 x | |
1 x | AL Axle Shaft 4.0x16 mm (2 uds) |
1 x | 40 mm gas motor standoff |
1 x | Motor holder for AC 28/7 |
1 x | 3.2 mm Prop Adapter M6 |
1 x | Aluminium battery holder red |
1 x | Prop Shaft Adapter 8 mm/M12 "long" |
1 x | Aluminium wide washer M3 blue (4 pcs) |
1 x | Aluminium wide washer M4 Red (4 pcs) |
1 x | |
1 x | Radial heatsink for MPJ AC25/35-xx motor |
1 x | Motor Typhoon 6/20 |
1 x | 45 mm gas motor standoff |
1 x | 30 mm gas motor standoff |
1 x | Lunak ARF 2000 mm Yellow (Hacker Model) |
1 x | Cooler motor type 280 |
1 x | 10 mm gas motor standoff |
1 x | MAMBO 17 |
1 x | THERMIK XL 4000 mm |
1 x | VAGABOND 1500 mm ARF V2 (Red) |
2 x | 5 mm Prop Adapter M8 |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs) |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m |
1 x | Carbon fabric 68 g/m² (style 493 aero, plain weave) 100 cm |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs) |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs) |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m |
1 x | Mounting base Ms 8 mm |
1 x | Pilatus PC-21 + LG.2100 mm RED/WHITE (SebArt) |
1 x | 1/10 Pilot "Jimmy" |
1 x | 5 mm Prop Adapter M6 |
1 x | Hawker Hunter (RBC Kits) |
1 x | Fournier RF-4D |
1 x | Birch plywood plate 600x300x4.0 mm |
1 x | F-100 Super Sabre (RBC Kits) |
1 x | Aero-Master Fuselage (Aero-naut) |
1 x | Ancla 16 mm (2 pcs) |
1 x | Pilatus PC-21 50E, Decal set (SebArt) |
1 x | Liston HAYA 3 x 10 x 1000 mm |
1 x | quality beech plywood BIRCH 600x300x2.0 mm |
1 x | ALMIRALSANKER anchor 40 mm (2 uds) |
1 x | Pine wood slat 6.0x6.0x1000 mm |
1 x | P-51 Red PNP 1700 mm (FMS) |
1 x | Bandera Frankr 4x6 |
1 x | Pine wood slat 10x10x1000 mm |
1 x | Pilatus PC-21 50E, Pilots set (SebArt) |
1 x | Anchor of tow Met. 60 mm |
1 x | Pilatus PC-21 50E, Yellow cabine (SebArt) |
1 x | Pine wood slat 3.0x10.0x1000 mm |
1 x | Skyhawk (RBC Kits) |
1 x | F-104 Starfighter USAF (SebArt) |
1 x | Aluminium wide washer M4 Black (4 pcs) |
1 x | Steel brush wheel with 2.35mm |
![](images/pixel_black.gif) |
198,255.70EUR |