Top » Catalog » Planes » Turbine » HISPANO AVIACION » BULL MØ1 2.6 » HABULLMo1R

3,950.00EUR

BULL MØ1 2.600mm RED
[HABULLMo1R]

BULL MØ1 2.600mm RED

An innovative structural design and its original design make the BULL Mo1 original and elegant.
Its NACA shots made by our aeronautical engineers make the Bull Mo1 possibly the most advanced aircraft in the market in terms of the design of "fluid dynamics" on an RC jet.
Fully built in "vacuum technology" with new materials and the most advanced techniques.
The construction quality is higher compared to the standard in the market.
Quick and easy to build.
The large opening at the top allows easy access for the installation of all electronic components and thus can be completely inspected. It has a lower access for the installation and testing of the turbine, with a completely new system for anchoring the turbine.
The flight characteristics are incredible at all speeds, but where it demonstrates its power is in its slow and harmonious flight.
Thanks to this feature, the BULL Mo1 can be flown by novice pilots, but they will delight the most extreme pilots.
The BULL Mo1 has been designed to be used with turbines from 13 Kg to 20 Kg. It is also possible to install a Vector trust to perform 3D maneuvers.
Factory building and custom painting service is available

Wingspan 2.600 mm
Lenght: 2.260 mm
Weigh kit aprox. 6.990 g
Turbine 13 a 20 Kg

under request

Reviews

Categories

* OFFER MONTH *
Planes->
  Aluminium
  Kits constructions
  Electric->
  Gasoline-Glow->
  Turbine->
    AEROFOAM
    BAJA Jets
    BOOMERANG RC-JETS
    GLIDET.IT
    GLOBAL JET CLUB
    GRUMANIA Jets
    HANGAR 9
    HISPANO AVIACION->
      BULL MØ1 2.6
      BULL MØ1 2.6 Accesorios
      ULTIMATUM 1.5 Accesorios
      ULTIMATUM 2.0
      ULTIMATUM 2.0 Accesories
      ULTIMATUM 3.0 Accesories
    JET-TENG MODELS
    JMB Jets Models
    PAF Modellbau
    PILOT RC
    RIPMAX->
    SEBART->
    SKYMASTER
    TopRCModel
  FPV
  VC
  Childrens line
  Aircraft Planes
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

Electric Landing Gear ULTIMATUM 3.0 (Elektron Re
1,160.39EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x
1 x	Carbon fiber rod 3.0 mm x 1000 mm
1 x	Balsa panel 8.0x100x1000 mm
1 x	BALSA leading edge 8x10x1000 mm
1 x	Balsa panel 3.0x100x1000 mm
1 x	Xplorer4 anemometro
1 x	Carbon fiber flat 1000x3.0x0.5 mm
1 x	6 mm red aluminium threaded horn with patella
1 x	Carbon wing joinner 13,4 mm Ø 0,48 mm
1 x	Carbon fiber rod 14 mmx1000 mm
1 x	Aluminium sheet 500x250x0,5mm
1 x	Fixed launching hook
2 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m
1 x	ABS angle 10,0x10,0x1000 mm
1 x	Profile ABS half cane 8.0x1000 mm
1 x	Conector JR Servo male (50 pcs)
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs)
2 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs)
1 x	Carbon fibre sandwich sheet 350x150x3 mm
1 x	Support pump Xicoy X45
1 x	Support Flush MPX Conector (6 pcs)
1 x	Angle support XT60 conector
1 x	Breatex™ Non-woven absorber 150 g/m² Roll 50m
1 x	Profile ABS triangular 2.0x1000 mm 90º
1 x	Conector FUTABA Servo female (10 pcs)
2 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs)
1 x	Cross Connector 4.0 mm x 1000 mm
1 x	ABS tube 7.0x6.0x1000 mm
1 x	Cable coupler M2 (10 uds)
1 x	Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm)
1 x	Oracover CHROME 2m
1 x	Fully Threaded Steel Rod M2,5 (2 uds)
1 x	Carbon tube (L 1000 mm, Ø10 mm, Ø8 mm)
1 x	Carbon tube (L 1000 mm, Ø2 mm, Ø1 mm)
1 x	Round Rod 4,0x1000 mm
1 x	Sun Cover ULTIMATUM 2.0 (Hispano Aviacion)
1 x	Suncover 100cc Red
1 x	Carbon tube (L 1000 mm, Ø14 mm, Ø12 mm)
1 x	3,2x1000 mm 2:1 red termoretract tube
1 x	Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm)
1 x	26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	SE Ring 480 mm (2 pcs)
1 x	55% silver electrodes (2 pcs)
1 x	Crimping tool
1 x	Extra Hard Titanium Herxagon Screwdrivers
1 x	2,5x60 mm allen screwdriver
1 x	Spikes Band (5 m)
1 x	Fabric scissors curved (offset handles), 16 cm / 6" length
1 x	Ring 320 mm length (5 pcs)
1 x	Tape GFK 50 mm
1 x	Electric Fuel Pump 12v
1 x	Adapters for 7.5 - 35cc aircraft and naval engines
1 x	PowerBox Smokepump JETs 2x outside
1 x	Tacometer mini ignition RCEXL
1 x	Propadapter for motor A50-V3
1 x	Universal Colour Paste deep black 250 g
1 x	Pine wood slat 3.0x10.0x1000 mm
1 x	Walnut wood slat 1.5x1.5x1000 mm
1 x	Mahogany wood slat 3.0x3.0x1000 mm
1 x	Walnut wood slat 3.0x3.0x1000 mm
1 x	Pine wood slat 3.0x7.0x1000 mm
1 x	Interface Jack Adapter IKARUS
1 x	Variable Flow Smoke Pump System
1 x	JM electric Pump
1 x	Propeller diller for EME35 and DLE35
1 x	Distanzstück motor OS 120 AX
1 x	Fibra carbono 3k tela 160g/m2 100 cm x 5m
1 x	Glass fibre sleeve Ø 20 mm X 10m
1 x	Peel ply 64 g/m² (plain weave) 150 cm x 20m
1 x	Glass fabric tape 225 g/m² (Silane, plain) 40 mm X 100m
1 x	Glass fibre braided sleeve (45mm) roll 10m
1 x	Glass fibre sleeve Ø 20 mm
1 x	Glass fabric 80 g/m² (silane, twill) 100 cm x 50m
1 x	PET film Mylar® A 350, 50 cm, roll/ 5 m
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs)
1 x	Landing lights 18 mm (0.71in)
1 x	Resistor 3W 5% OR82
1 x	Steel tube (L 1000 mm Ø10 mm, Ø9,7 mm)
1 x	Hard brass tubing (L 1000 mm, Ø10.0 mm, Ø9.1 mm)
1 x	165 mm PVC transparent battery termo-retract 165 mm (10 m)
1 x	Oracover Black 10 m
1 x	Hard brass tubing (L 1000 mm, Ø8.0 mm, Ø6.1 m)
1 x	DYNAMOMETER S-1580
1 x	Monokote ROJO misil (1.8x0.65m)
1 x	Fiberglass tube 6/4x1000mm
1 x	Battery RX JETI LiIon RB 5200 7.2v
1 x	Carbon tube 3K-PW (L 2000 mm, Ø25 mm, Ø22.5 mm)
1 x	Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
1 x	20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	Soporte filtro FESTO (4 pcs)
1 x	Support Filtro FESTO
1 x	Soporte grifo FESTO vertical (1 pcs)
1 x	Glass fabric 49 g/m² (Finish FE 800, plain) 110 cm x 3m
1 x	Peel ply 100 g/m² (plain weave) 50 cm x 2m
1 x	Demoulding wedge red (40 x 20 mm) 5 pcs
1 x	Glass fabric 49 g/m² (1,27 x 20 m)
1 x	Glass fabric 49 g/m² (Finish FE 800, plain) 110 cm x 1m
1 x	Peel ply 95 g/m² (plain weave) 20 mm x 100 m
1 x	Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m
1 x	Carbon roving DowAksa / 24k / 1600 tex
1 x	Glass fabric 80 g/m² (FK 144, twill weave) 100 cm, pack/ 5 m
1 x	Glass fabric 49 g/m² (1,27 x 5 m)
1 x	Carbon fibre tape 200 g/m² (unidirectional) 50 mm
1 x	Vacuum bag, 1200 mm x 50 m
1 x	Carbon Non-Woven, 160 g/m² 100 cm 10 m
1 x	Glass fabric 390 g/m² (silane, twill) 100 cm x 20m
1 x	Glass fabric 80 g/m² (plain) 100 cm, roll/ 20 m Aero Finish
2 x	Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M
1 x	Glass fabric 80 g/m² (twill) 100 cm x 50m
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs)
1 x	Glass fabric tape 225 g/m² (Silane, plain) 30 mm X 100m
1 x	Glass fabric tape 225 g/m² (Silane, plain) 40 mm
1 x	Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m
1 x	Glass fabric 49 g/m² (1,27 x 10 m)
1 x	Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m
1 x	Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m
1 x	Carbon Non-Woven, 160 g/m² 127 cm 5m
1 x	Peel ply 95 g/m² (plain weave) 100 mm x 100 m
1 x	Glass fibre sleeve Ø 20 mm X 20m
1 x	Fibra carbono tela 160g/m2 100 cm x 2 m (twill weave)
1 x	Panel Honeycom carbon 350x150x3.5mm
1 x	PVC grid diagonal 290x185x0.32 mm
1 x	Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m
1 x	TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m
1 x	PVC grid straight 290x185x0.32 mm
1 x	Glass fabric 49 g/m² (Finish FE 800, plain) 110 cm x 20m
1 x	Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m
1 x	Peel ply 64 g/m² (plain weave) 150 cm x 10m
1 x	Starter EM Gear Power 250
1 x	Cover cap drop-shaped paintable 43 mm
1 x	Heat sink for Optotronix LEDs
1 x	Starter EM Gear Power 80
1 x	Foam air filter Ø 48 mm, blue
1 x	Combo lighting module with covering drop shape
1 x	Resistor 3W 5% OR47
1 x	Resistor 3W 5% 2R2
1 x	4,8x1000 mm 2:1 red termoretract tube
1 x	Battery RX JETI LiIon RB 2600 7.2v
1 x	Jet Afterburner Simulator NF-Jet3 YSW
1 x	6,4x1000 mm 2:1 blue termoretract tube
1 x	Carbon tube 3K-PW (L 1000 mm, Ø30 mm, Ø26 mm)
1 x	CF tube (L 1000 mm Ø0,7 mm, Ø0,3 mm)
1 x	12.7 mm 2:1 black termoretract tube
1 x	2,4x1000 mm 2:1 black termoretract tube
1 x	ORACOVER Ferrari red (2 m)
1 x	19 mm 2:1 black termoretract tube
1 x	Hard brass tubing (L 1000 mm, Ø14.0 mm, Ø12.0 mm)
1 x	Crystal Universal RX 35.020 Ch 62
1 x	Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø36 mm)
1 x	Steel tube (L 1000 mm Ø8 mm, Ø7,7 mm)
1 x	NF-3XL set
1 x	Jet Afterburner Simulator NF-Jet3 RYS
1 x	Optical RPM Sensor
1 x	Servo TT ACE SHV 1504 MG
1 x	68 mm PVC transparent battery termo-retract 68 mm (1 m)
1 x	Hard brass tubing (L 1000 mm, Ø11.0 mm, Ø10.0 mm)
1 x	NF-3X-80 liner Kit
1 x	Steel tube (L 1000 mm Ø4 mm, Ø3,7 mm)
1 x	Oracover Brown 2 m
1 x	Battery EMCOTEC LiIon 3000 7.2v
1 x	135 mm PVC transparent battery termo-retract 68 mm (1 m)
1 x	Micro Crystal RX 35.010 Ch 61
1 x	Monokote BLUE metalizado (1.8x0.65m)
1 x	6,4x1000 mm 2:1 red termoretract tube
1 x	Oracover CARBON Metalic 1 m
1 x	Jet Afterburner Simulator NF-Jet2YY Set
1 x	Carbon tube 3K-PW (L 1000 mm, Ø40 mm, Ø36 mm)
1 x	PowerPack 2.5X2 PRO
1 x	Crystal Universal RX 35.120 Ch 72
1 x	SE Ring 200 mm (2 pcs)

9,774.03EUR