4,200.00EUR

BULL MØ1 2.600mm "McLAREN-GULF"
[HABULLMo1MC]


BULL MØ1 2.600mm \"McLAREN-GULF\"
BULL MØ1 2.600mm "McLAREN-GULF"

An innovative structural design and its original design make the BULL Mo1 original and elegant.
Its NACA shots made by our aeronautical engineers make the Bull Mo1 possibly the most advanced aircraft in the market in terms of the design of "fluid dynamics" on an RC jet.
Fully built in "vacuum technology" with new materials and the most advanced techniques.
The construction quality is higher compared to the standard in the market.
Quick and easy to build.
The large opening at the top allows easy access for the installation of all electronic components and thus can be completely inspected. It has a lower access for the installation and testing of the turbine, with a completely new system for anchoring the turbine.
The flight characteristics are incredible at all speeds, but where it demonstrates its power is in its slow and harmonious flight.
Thanks to this feature, the BULL Mo1 can be flown by novice pilots, but they will delight the most extreme pilots.
The BULL Mo1 has been designed to be used with turbines from 13 Kg to 20 Kg. It is also possible to install a Vector trust to perform 3D maneuvers.
Factory building and custom painting service is available

Wingspan 2.600 mm
Lenght: 2.260 mm
Weigh kit aprox. 6.990 g
Turbine 13 a 20 Kg


Reviews

We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x U Profile ABS 3,0x6,0x1000 mm
1 x Simulador RealFlight RF-9.5 S (sin emisora)
1 x Streamline Stainless Steel Tubing 9.0x5.0x1000 mm
3 x Streamline Stainless Steel Tubing 7.5x4.5x1000 mm
1 x Interface Realflight Simulator
1 x ABS "T" angle 2.0x2.0x1000 mm
1 x Big Crow DLE-170M
1 x Streamline Stainless Steel Tubing 11.5x6.5x1000 m
1 x Streamline Stainless Steel Tubing 14.5x9.6x1000 mm
2 x ABS angle 2,0x2,0x1000 mm
1 x ABS angle 10,0x10,0x1000 mm
1 x SIMtransmitter 6 Mode 2
1 x U Profile ABS 8,0x4,0x1000 mm
1 x Streamline Stainless Steel Tubing 19.5x9.8x1000 mm
1 x EasyFLY Addon
1 x ABS "T" angle 8.0x8.0x1000 mm
1 x L-Connector 4.0 mm x 1000 mm
1 x ABS "T" angle 6.0x6.0x1000 mm
1 x Motor DLE 200cc Std
1 x U Profile ABS 5,0x10,0x1000 mm
1 x Streamline Stainless Steel Tubing 6.3x3.5x1000 mm
2 x L-Connector 1.5 mm x 1000 mm
2 x ABS angle 1.5x1.5x1000 mm
1 x Motor DLE 430 cc - Paramotors
1 x RF9 Flight Simulator with Spektrum Controller
1 x Slave-cable USB Easy Sim
1 x Silent-blocks DLE 170M
1 x Profile ABS Square 4 x 1000 mm
2 x L-Connector 1.0 mm x 1000 mm
2 x Profile ABS half cane 2.5x1000 mm
1 x ABS angle 6,0x6,0x1000 mm
1 x ABS angle 3,0x3,0x1000 mm
1 x ABS "T" angle 4.0x4.0x1000 mm
1 x Motor DLE 200cc Premium Muffler
1 x SE Ring 360 mm (2 pcs)
1 x 20x1000 mm Ring Strap Back To Back
1 x Glases Flitemaster
1 x Glases Nimbus
1 x Marker ties (20 pcs)
1 x Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs)
2 x Spikes Band (5 m)
1 x 
2 x SE Ring 200 mm (2 pcs)
1 x Glases Stratus
1 x SE Ring 450 mm (2 pcs)
2 x 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x Tape GFK 38 mm
2 x SE Ring HACKER 300 mm (2 pcs)
1 x Ring 320 mm length (5 pcs)
2 x 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
2 x SE Ring 250 mm (2 pcs)
1 x Oracover Green10 m
1 x Oracover CHROME 2m
1 x Oracover Yellow CUB 10 m
1 x Oratex Red Fokker 10 m
1 x Monokote ROJO misil (1.8x0.65m)
1 x ORACOVER Fluor red (2 m)
1 x Monokote BLANCO jet (1.8x0.65m)
1 x ORACOVER transparent Yellow (10 m)
1 x Oratex White 2m
1 x Oratex Natural White 2m
1 x Oratex Antik 2m
1 x Oracover White 10 m
1 x Ply-Span 450x600/13g White
1 x Oracover Black 2 m
1 x Oratex Natural White 20m
1 x Oracover Yellow CADMIO 2 m
1 x MYLAR film A350 (1000x500 mm)
1 x Ply-Span 450x600/13g Orange
1 x Monokote PLATINO metalizado (1.8x0.65m)
1 x Oracover Red 2 m
1 x Oracover ROYAL RED 2m
1 x Oracover Azul 2 m
1 x Papel japones 12 grs/m2 760x510 mm JAPICO
1 x Oracover GREY Seafire Sea 2m
1 x Oracover light Grey 2m
1 x Oracover Yellow CADMIO 10 m
1 x Quicklock washer 2.5 mm (10 pcs)
1 x Pasacables rectangular 40x15 mm (4 pcs)
1 x Profile ABS half cane 8.0x1000 mm
1 x U Profile ABS 1,0x2,0x1000 mm
2 x Streamline Stainless Steel Tubing 17.8x12.4x1000 mm
1 x Micro Tarjeta SD Rapid Rush 16 GB
1 x Glases Moritz
1 x 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x SE Ring 300 mm (2 pcs)
1 x 20x200 mm battery rings
1 x 14x60 mm Mini rings Tie Wraps (4 pcs)
1 x 26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x Propeller FALCON 32,5x11 PUSHER Carbono
1 x Waterproof adhesive tape, width 19mm, length 25m
2 x U Profile ABS 2,0x4,0x1000 mm
1 x Pad self adhesive, up to 3mm / 0.12″, (10 pcs)
1 x 20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x Foil for sticking flaps and ailerons
1 x SE Ring 350 mm (2 pcs)
1 x Flat Connector 4.0 mm x 1000 mm
1 x Epoxy Resin L + Hardener CL (60 min) kit/ 930 g
1 x VIPER JET G2 Esq. 2 White/Red
1 x MB-339 Aerofoam G2 "Italian Air Force Camu"
1 x Jeemo Dolly
1 x resin-hardener L-385 H-385 (5000 g)
1 x Set stickers JEEMO "Andy"
1 x 100 Newtons FEMA absorber
1 x Spare Shaft Ø6mm L:450mm M5
1 x Propeller RABOESCH M3 50 mm (3 Blades pr) (Left hydropropeller)
1 x Epoxy Resin L 285 + Hardener 386, kit/ 3.355 kg
1 x VIPER JET G2 Esq. 2 Red/White/Silver
1 x Epoxy Resin L (2.5 Kg)
1 x Ply-Span 450x600/13g Red
1 x 6,4x1000 mm 2:1 red termoretract tube
1 x 
1 x 101x28 mm (4.0") Type jets aluminium core wheel
1 x 1,2x1000 mm 2:1 red termoretract tube
1 x 1/6 Pilot "Garry"
1 x PVC lilac battery termo-retract 70 mm (10 m)
1 x PVC termo-retract battery 95 mm blue transparent (1 m)
1 x PVC yellow-orange transparent battery termo-retract 57 mm (1 m)
1 x Strip ABS 2.0x8.0x1000 mm
1 x Round Rod 2,0x1000 mm
1 x Strip ABS 2.0x10.0x1000 mm
1 x ABS I Strip 10x5x1000 mm
1 x ABS Strip 1.0x2.0x1000 mm
1 x 30cm Flexible Stainless Steel Exhaust Tubing D=25mm
1 x 60 mm long Prop hub for ZG45SL, ZG62/S/SL and ZG80B
1 x BULL MØ1 2.600mm "RED BULL"
1 x BULL MØ1 2.600mm BLUE
1 x Round Rod 2,5x1000 mm
1 x ABS Strip 1.0x3.0x1000 mm
1 x 22x10 prop Super Silence
1 x 55% silver electrodes (2 pcs)
1 x 3-blades 27x12 carbon prop Super Silence
1 x 3-blades 20x12 carbon prop Super Silence
1 x 100g Flux Paste for Silver Solder
1 x 3-blades 24x12 carbon prop Super Silence
1 x 10cm Flexible Stainless Steel Exhaust Tubing D=25mm
1 x 500 ccm complete gasoline fuel tank
1 x 27x10 prop Super Silence
1 x 3-blades 28x12 carbon prop Super Silence
1 x 
1 x 24x12 prop Super Silence
1 x 24x14 prop Super Silence
1 x 3-blades 16x10 carbon prop Super Silence
1 x 3-blades 21x12carbon prop Super Silence
1 x 3 mm metalic joint for DA-35 or DA-75 cilinder/elbow
1 x 30x14 prop Super Silence
1 x 
1 x 500 ccm gasoline fuel tank
1 x 24x10 prop Super Silence
1 x 20cm Flexible Stainless Steel Exhaust Tubing D=25mm
1 x 50cm Flexible Stainless Steel Exhaust Tubing D=25mm
1 x 29x12 prop Super Silence
1 x 28x12 prop Super Silence
1 x BULL MØ1 2.600mm ORANGE
1 x BULL MØ1 2.600mm RED
1 x BULL MØ1 2.600mm "McLAREN-GULF"
1 x BULL MØ1 2.600mm YELLOW
45,469.63EUR
Manufacturers
Manufacturer Info
Hispano Aviacion
Other products
Languages
Español English
Currencies