Top » Catalog » Planes » Turbine » HISPANO AVIACION » BULL MØ1 2.6 » HABULLMo1G

3,950.00EUR

BULL MØ1 2.600mm GREEN
[HABULLMo1G]

BULL MØ1 2.600mm GREEN

An innovative structural design and its original design make the BULL Mo1 original and elegant.
Its NACA shots made by our aeronautical engineers make the Bull Mo1 possibly the most advanced aircraft in the market in terms of the design of "fluid dynamics" on an RC jet.
Fully built in "vacuum technology" with new materials and the most advanced techniques.
The construction quality is higher compared to the standard in the market.
Quick and easy to build.
The large opening at the top allows easy access for the installation of all electronic components and thus can be completely inspected. It has a lower access for the installation and testing of the turbine, with a completely new system for anchoring the turbine.
The flight characteristics are incredible at all speeds, but where it demonstrates its power is in its slow and harmonious flight.
Thanks to this feature, the BULL Mo1 can be flown by novice pilots, but they will delight the most extreme pilots.
The BULL Mo1 has been designed to be used with turbines from 13 Kg to 20 Kg. It is also possible to install a Vector trust to perform 3D maneuvers.
Factory building and custom painting service is available

Wingspan 2.600 mm
Lenght: 2.260 mm
Weigh kit aprox. 6.990 g
Turbine 13 a 20 Kg

under request

Reviews

Categories

* OFFER MONTH *
Planes->
  Aluminium
  Kits constructions
  Electric->
  Gasoline-Glow->
  Turbine->
    AEROFOAM
    BAJA Jets
    BOOMERANG RC-JETS
    GLIDET.IT
    GLOBAL JET CLUB
    GRUMANIA Jets
    HANGAR 9
    HISPANO AVIACION->
      BULL MØ1 2.6
      BULL MØ1 2.6 Accesorios
      ULTIMATUM 1.5 Accesorios
      ULTIMATUM 2.0
      ULTIMATUM 2.0 Accesories
      ULTIMATUM 3.0 Accesories
    JET-TENG MODELS
    JMB Jets Models
    PAF Modellbau
    PILOT RC
    RIPMAX->
    SEBART->
    SKYMASTER
    TopRCModel
  FPV
  VC
  Childrens line
  Aircraft Planes
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

Servo KST BLS905X HV V2.0 8Kg 20mm
93.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	5 mm Prop Adapter M8
2 x	Anchor 80 mm (2 uds)
2 x	Anchor 25 mm (2 uds)
1 x	Prop Shaft Adapter 5 mm/M8 "long"
1 x	Anchor 50 mm (2 uds)
1 x	5 mm Prop Adapter CN-Spinner
1 x	3.2 mm Prop Adapter M8
2 x	Aero-Master Cabine (Aero-naut)
1 x	5 mm Prop Adapter M6
1 x	6 mm Prop Adapter M8
2 x	Anchor 25 mm (2 uds)
1 x	Prop Shaft Adapter 5 mm "long"
1 x	Prop Shaft Adapter 4 mm/M8 "long" 35 mm
1 x	6 mm Prop Adapter M8
1 x	5 mm Prop Adapter M8
1 x	La Capitania di Venetia accesories
1 x	3.17 mm Prop Adapter CN-Spinner
1 x	4 mm Prop Adapter M8
1 x	3 mm Prop Adapter M6
1 x	Prop Shaft Adapter 6 mm/M8 "long" 35 mm
1 x	3,2 mm Prop Adapter M8
1 x	10 mm Prop Adapter M12
1 x	3,2 mm Prop Adapter M6
1 x	2,3 mm Prop Adapter M6
1 x	3 mm Prop Adapter M6
1 x	2,3 mm Prop Adapter M6
2 x	Aero-Master Wings (Aero-naut)
1 x	Motor A2212/13T
1 x	Spinner 3BL propeller pleg. 36 mm / 6,0 mm
1 x	White spinner propeller pleg. 55 mm / 5 mm
2 x	White smoke bombs AX-9 (10 pcs)
1 x	Brass ball links BS M3 V1 (10 pcs)
1 x	1/4 Pilot "Mike"
2 x	Extension 100 cm (Futaba)
1 x	Couple M4 for wire (10 pcs)
1 x	"Y" charging 4mm wire (2 IN-1 OUT).
1 x	MYLAR film A350 (1000x500 mm)
1 x	Militarian pilot "Kamikaze" size 9cm (Slimline)
1 x	Yellow smoke bombs AX-60 (5 pcs)
1 x	Red smoke canister 140 g
1 x	BRASS CONTROL HORN M3x16 mm 2pcs
3 x	Extension silicon 25 cm (Graupner)
2 x	Extension silicon 30 cm female (Graupner)
1 x	Monokote BLUE metalizado (1.8x0.65m)
1 x	Oracover Black 10 m
1 x	4,8x1000 mm 2:1 blue termoretract tube
1 x	AX-60 starters (5 pcs)
1 x	Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x	Kwik link AL M3 L:40 mm (2 pcs) + Pin Ø 2,5 mm
1 x	1/10 Pilot "Jack"
1 x
1 x	B4-0 rocket charges (6 pcs)
1 x	Circlick securite
1 x	Kwik link AL M4 L:40 mm (2 pcs) + Pin Ø 2,5 mm
1 x	DPSI magnetic switch actuator (housing)
1 x	1/12 Pilot "Tom"
1 x	1/7 Pilot "Japanese"
1 x	1/6 Pilot "Tony"
1 x	Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x	2,4x1000 mm 2:1 black termoretract tube
1 x	Aluminium blue ball links M3 V1 (10 pcs)
1 x	1/12 Pilot "Langley"
1 x	Piloto Jet "Green" 1/6 Scale
1 x	6 mm red aluminium threaded horn with patella
1 x	20 mm carbon horn
1 x	LOWER TOW HOOK
2 x	Universal Colour Paste deep black 50 g
1 x	Banna gold connector 2,5 mm (M/F)
1 x	Pin type hinge Al 4,5x70 mm to wire (2 pcs)
1 x	Cable with accesories
2 x	Universal Colour Paste signal white (RAL 9003) 1 Kg
1 x	ABS Strip 1.5x8.0x1000 mm
1 x	Tube support Ø 6mm (10 pcs)
1 x	ABS Strip 1.5x3.0x1000 mm
2 x
1 x	Brass control horn M3 short for wire (2 pcs)
2 x	Nylon hinge 20x20x0,3 (10 pcs)
1 x	Small aluminium horn gold (2pcs)
1 x	Threaded coupler ALU Left M2,5 Ø 4 (2 uds)
1 x	Tirpiz Battleship 1:200
1 x	Xplorer1 anemometro
1 x	Xplorer3 anemometro
1 x	servo adapter lead, JST-SH socket - JR male Pin, for GR-12SH+HoT
1 x	Futaba Female 40 cm extension
1 x	BALSA triangular 15x15x1000 mm
1 x	Futaba Female 40 cm extension
1 x	BALSA trip 6.0x6.0x1000 mm
1 x	Balsa panel 1.5x100x1000 mm
1 x	Plastic caps for AIR BURTS (30 pcs)
1 x	Ventral support for AX-18/AX-60
1 x	Servo MKS HV6130
1 x	Servo MKS 6100 DS
1 x	Red smoke canister 65 g
1 x	Initior Transmitter FTX2 Wireless
2 x	Extension silicon 25 cm (Futaba)
1 x	Smoke set "M"
1 x	Blue smoke canister 100 g
1 x	Green smoke canister 100 g
1 x	"S" set for boats
1 x	A/C quality beech plywood BIRCH 600x300x1.0 mm
1 x	Spray adhesive AEROFIX 2
1 x	Paint gun for sprays
1 x	Antiaircraft gun 10.5 cm (2 pcs)
1 x	ABS 500 x 400 x 0,5 mm (white)
1 x	76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x	Small adjustable control horn with bearing
1 x	Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 4 mm
1 x	Stickers-digit for marking
1 x	Small adjustable aluminium control horn with bearing 2,8x15
1 x	Rudder forward 70x28 "type Kato"
1 x	PC-21 2880 mm Tren aterrizaje electrico(Electron Retracts
1 x	MB339 CANADA PNP 1790 mm
1 x	Pin hinge 34x16 mm (10 uds)
1 x	Servo GO-12S69MG 26kg.cm 0.10s/60º
1 x	Extension 7.5 cm
2 x	Extension silicon 10 cm (Futaba)
1 x	Premium servo extension 100cm
2 x	Extension silicon 100 cm (Futaba)
1 x	Cable S.BUS 3 salidas 300 mm
1 x	Extension silicon 10 cm (Graupner)
1 x	Extension silicon 50 cm (Graupner)
1 x	Cabel "Y" 30 cm (Futaba)
1 x	Extension S-Bus 1-2 silicon 120 cm FUTABA
1 x	Balsa panel 6.0x100x1000 mm
1 x	Bags wings/rudder ASPIRE
1 x	Balsa panel 8.0x100x1000 mm
1 x	Bateria LRP 2200-7.2v 6 cell NiMH
1 x	BALSA leading edge 8x10x1000 mm
1 x	Extension 15 cm (Futaba)
1 x	Aro pasacable Ø25 mm (4 pcs)
1 x	Ball link Aluminio M3 (2 pcs)
1 x	Cabel "Y" 30 cm (graupner)
1 x	Cable S.BUS 3 salidas 100 mm
1 x	Antenna holder bracket double
1 x	Antenna Cloverleaf 5.8 GHz Tx - Rx
1 x	BALSA trip 8.0x8.0x1000 mm
1 x	Cable silicona female batt. receptor 30 cm (Futaba)
1 x	Cable silicona macho batt. receptor 30 cm (Futaba)
1 x	BALSA trip 2.0x2.0x1000 mm
1 x	Extension silicon 30 cm male (Futaba)
1 x	BALSA trip 2.0x10.0x1000 mm
1 x	200 mm extensión servo HITEC/JR
1 x	Balsa panel 10x100x1000 mm
1 x	Extension S-Bus 1-2 silicon 30 cm FUTABA
1 x	BALSA trip 4.0x4.0x1000 mm
1 x	Aro pasacable Ø20 mm (4 pcs)
1 x	Extension silicon 30 cm male (Graupner)
1 x	Extension 90 cm (Futaba)
1 x	Balsa panel 5.0x100x1000 mm
1 x	460 mm EPP Floats
1 x	Cable silicona macho batt. receptor 30 cm (Graupner)
1 x	BALSA trip 5.0x5.0x1000 mm
1 x	Balsa panel 1.0x100x1000 mm
1 x	Cabel "Y" 15 cm
1 x	0,14 mm PVC servo wire extension, ZH micro conector.
1 x	Extension silicon 100 cm (Graupner)
1 x	Bags wings/rudder ODYSSEY
2 x	Extension silicon 75 cm (Graupner)
1 x	Extension silicon 50 cm (Futaba)
2 x	Extension silicon 75 cm (Futaba)
1 x	Extension 30 cm (Futaba)
1 x	Extension PVC 150 cm (Graupner)
1 x	Servo DITEX TD2612S
1 x	Initior Receiver FRX2 Wireless
1 x	White smoke bombs AX-18 (5 pcs)
1 x	Servo Metal Horn 15.5 mm MKS
1 x	Smoke set "Glider"
1 x	Servo MKS HBL599 SL
1 x	White smoke canister 100 g
1 x	White smoke bombs AX-3 (10 pcs)
1 x	"S" set for planes
1 x	PCARD Wireless System
1 x	Servo MKS HV747
1 x	Parachutist
1 x	Electric rocket starters (6 pcs)
1 x	Yellow smoke canister 100 g
1 x	Servo MKS HBL550
1 x	Red smoke bombs AX-60 (5 pcs)
1 x	Black smoke bombs AX-60 (5 pcs)
1 x	Servo MKS HV1220
1 x	Red smoke canister 100 g
1 x	White smoke canister 140 g
1 x	Smoke set "S"
1 x	AX-60 starters (5 pcs)
1 x	White smoke canister 65 g
1 x	Blue smoke canister 140 g
1 x	Green smoke canister 140 g
1 x	Servo MKS HV69
1 x	Hobbylite Filler, Balsa colour
1 x	Ancla 40 x 24 mm (2 pcs)
1 x	Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm)
1 x	Release wax 250ml
1 x	Ancla Met. 16 mm (5 pcs)
1 x	Ancla metal 40 mm (2 uds)
1 x	Solvent Plasti Dip 1000 ml
1 x	ALMIRALSANKER anchor 40 mm (2 uds)
1 x	Silicone adhesive ELASTOSIL® E4, tube/ 90 ml
1 x	20 g tin paste
1 x	Aero-Master Fuselage (Aero-naut)
1 x	Actrocon 30A ESC
1 x	Ancla 16 mm (2 pcs)
1 x	Plasti Dip Liquid Tape 429 ml orange
1 x	8x6 tree blades propeller
1 x	ALU servo arm 90º 3 mm shaft
1 x	Ancla Admiralsanker 70 mm (2pcs)
1 x	ABS 500 x 400 x 1 mm (white)
1 x	Spannlack 1000 ml
1 x	ALU double servo arm 3 mm shaft
1 x	Nitroverdu 500 ml
1 x	75 mm
1 x	Partall paste 650 g
1 x	Painting GHT Lexan Black 150 ml
1 x	Aeronaut Baumbeschlag (Ms) 10 mm
1 x	Ancla Admiralsanker 60 mm (2pcs)
1 x	Antenna 50 mm (2 uds)
1 x	1000 ml sealer (DOPE)
1 x	Universal Colour Paste white 50 g
1 x	A/C quality beech plywood 600x300x0.6 mm
1 x	Plasti Dip Liquid Tape 429 ml black
1 x	Ancla Hist. 67 mm (2 uds)
1 x	Spray Graphit 33
1 x	ABS 500 x 400 x 2,0 mm (white)
1 x	Spray adhesive INFUTAC (Clear) 500 ml
1 x	Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 6 mm
1 x	Small aluminium horn red (2pcs)
1 x	Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 5 mm
1 x	Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 5 m
1 x	Threaded coupler ALU M2 Ø 4 (2 uds)
1 x	Threaded coupler ALU M3 Ø 6 (2 uds)
1 x	Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 7 m
1 x	Micro control horn (2 pcs)
1 x	Threaded coupler ALU Left M3 Ø 4 (2 uds)
1 x	Fast'n EZ-CA-Hinge (12 uds)
1 x	BD-5J PNP
1 x	Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs)
1 x	PC-21 2880 mm Propeller 5 blade 20x10 K45TP Scale composite
1 x	Pin type hinge Al 4,5x70 mm (2 pcs)
1 x	PC-21 2880 mm Spinner 5Blade red
1 x	Pin hinge 26x11 mm (10 uds)
1 x	Hovercraft sailcloth
1 x	Nylon hinge 20x15x0,3 (10 pcs)
1 x	Micro flex hinge (12 uds)
1 x	MIRAGE 2000 TIGER PNP
1 x	Gates hinge black 30x16 mm (2 pcs)
1 x	VIPER SL YELLOW PNP 2270 mm
1 x	JP Hobby ER-120 Tricycle FELIX JR
1 x	Crystal Universal RX 35.140 Ch 74
1 x	PC-21 XXL 3.395 mm
1 x	FELIX JR Red/Yellow 1750 mm
1 x	BD-5J ARF+
1 x	Sun Cover PC 21 XXL (JMB Jets)
1 x	Pin type hinge Al 3,0x50 mm demount (2 pcs)
1 x	Small flex hinge (12 uds)
1 x	Electric Landing Gear ULTIMATUM 2.0 (Elektron Retracts)
1 x	Sun Cover ULTIMATUM 2.0 (Hispano Aviacion)
1 x	BULL MØ1 2.600mm ORANGE

32,482.70EUR