3,950.00EUR

BULL MØ1 2.600mm RED
[HABULLMo1R]


BULL MØ1 2.600mm RED
BULL MØ1 2.600mm RED

An innovative structural design and its original design make the BULL Mo1 original and elegant.
Its NACA shots made by our aeronautical engineers make the Bull Mo1 possibly the most advanced aircraft in the market in terms of the design of "fluid dynamics" on an RC jet.
Fully built in "vacuum technology" with new materials and the most advanced techniques.
The construction quality is higher compared to the standard in the market.
Quick and easy to build.
The large opening at the top allows easy access for the installation of all electronic components and thus can be completely inspected. It has a lower access for the installation and testing of the turbine, with a completely new system for anchoring the turbine.
The flight characteristics are incredible at all speeds, but where it demonstrates its power is in its slow and harmonious flight.
Thanks to this feature, the BULL Mo1 can be flown by novice pilots, but they will delight the most extreme pilots.
The BULL Mo1 has been designed to be used with turbines from 13 Kg to 20 Kg. It is also possible to install a Vector trust to perform 3D maneuvers.
Factory building and custom painting service is available

Wingspan 2.600 mm
Lenght: 2.260 mm
Weigh kit aprox. 6.990 g
Turbine 13 a 20 Kg


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Interface Realflight Simulator
1 x EasyFLY Addon
1 x Simulador RealFlight RF-9.5 S (sin emisora)
1 x GameCommander USB Universal
1 x Interface Jack Adapter IKARUS
1 x Marker ties (20 pcs)
1 x Cinta Goldfix 1m
1 x 20x200 mm battery rings
1 x SE Ring 300 mm (2 pcs)
2 x RUDDOG Protection and Heat Shield Tape (2mx50mm)
2 x 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x SE Ring 240 mm (2 pcs)
1 x 14x60 mm Mini rings Tie Wraps (4 pcs)
1 x 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x Foil for sticking flaps and ailerons
2 x 20x1000 mm Ring Strap Back To Back
1 x SE Ring 200 mm (2 pcs)
1 x Pad self adhesive, up to 3mm / 0.12″, (10 pcs)
2 x SE Ring 350 mm (2 pcs)
2 x SE Ring 480 mm (2 pcs)
1 x 26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x Spikes Band (5 m)
1 x SE Ring 450 mm (2 pcs)
1 x Tape GFK 38 mm
1 x Pine wood slat 3.0x5.0x1000 mm
1 x Beech dowels 2.0 x 1000 mm
1 x BALSA trip 8.0x8.0x1000 mm
1 x BALSA triangular 8x8x1000 mm
1 x BALSA trip 5.0x5.0x1000 mm
2 x Mahogany wood slat 3.0x3.0x1000 mm
2 x Beech dowels 3.0 x 1000 mm
1 x BALSA trip 4.0x4.0x1000 mm
2 x BALSA trip 3.0x3.0x1000 mm
2 x Liston HAYA 10 x 10 x 1000 mm
2 x BALSA triangular 15x15x1000 mm
1 x servo adapter lead, JST-SH socket - JR male Pin, for GR-12SH+HoT
1 x Premium servo extension 25cm
1 x Prolongador S-Bus JR/JR 20cm
1 x Extension S-Bus 1-2 silicon 30 cm FUTABA
1 x Extension S-Bus 1-2 silicon 120 cm FUTABA
2 x Strip 2,5x1,25x330 mm
1 x Extension 7.5 cm
1 x Extension silicon 35 cm male (Futaba)
1 x Round Rod 2,5x1000 mm
1 x 200 mm extensión servo HITEC/JR
1 x silicon 100 cm Futaba Extension Ø 0,35 mm
1 x ABS Strip 1.5x3.0x1000 mm
1 x Extension 100 cm (Futaba)
1 x Circlick securite
2 x ABS Strip 1.0x5.0x1000 mm
1 x 1,2x1000 mm 2:1 red termoretract tube
1 x Carbon fiber rod 1.5 mm x 1000 mm
1 x Canopy Lock V1 M3 Blue (2 pcs)
1 x Ferrita 27x14x7 mm
1 x Pin type hinge Al 4,5x70 mm (2 pcs)
1 x Sun Cover ULTIMATUM 2.0 (Hispano Aviacion)
2 x Tape GFK 25 mm
1 x Waterproof adhesive tape, width 19mm, length 25m
1 x Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
1 x Ring 320 mm length (5 pcs)
1 x SE Ring 400 mm (2 pcs)
1 x 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x Helices DJI Mavic Air STEALTH "Black" (4x Ud)
2 x Trailing edge BALSA 35x8x1000 mm
1 x PowerPack 2.5X2 PRO
1 x RF9 Flight Simulator with Spektrum Controller
2 x Linden wood slat 2.0x2.0x1000 mm
1 x Liston HAYA 3 x 10 x 1000 mm
1 x Balsa panel 2.0x100x1000 mm
1 x BALSA leading edge 8x10x1000 mm
1 x Birch plywood plate 600x300x4.0 mm
1 x Balsa panel 3.0x100x1000 mm
1 x Plywood sheet BEECH 600 x 300 x 2,0 mm
1 x Pine wood slat 2.0x10.0x1000 mm
1 x A/C quality beech plywood 600x300x6.0 mm
1 x Balsa panel 4.0x100x1000 mm
1 x Birch plywood plate 600x300x2.5 mm
1 x Pine wood slat 3.0x10.0x1000 mm
1 x OBECHI sheet 2.0x3.0x1000 mm
1 x Lite Plywood panel 600x300x3.0 mm
1 x Walnut wood slat 1.5x1.5x1000 mm
1 x A/C quality beech plywood 600x300x6.0 mm
1 x BALSA trip 2.0x2.0x1000 mm
1 x Birch plywood plate 600x300x1.2 mm
1 x 
1 x Strip 3,5x1,75x330 mm
1 x Strip ABS 2.0x3.0x1000 mm
1 x ABS Strip 1.0x2.0x1000 mm
1 x Round Rod 3,0x1000 mm
1 x ABS Strip 1.5x4.0x1000 mm
1 x Strip ABS 2.0x8.0x1000 mm
1 x Round Rod 5,0x1000 mm
1 x Strip ABS 2.0x10.0x1000 mm
1 x Vertical cockpit anchor "tipe F3A" (2 pcs)
1 x 3.2 mm Prop Adapter M6
1 x 28 mm turnbuckle
1 x 3 mm Prop Adapter M6
1 x 300x4 mm M4 shaft ship
1 x 3,2 mm Prop Adapter M6
1 x Xoar Electric Beechwood Prop 12x6
1 x 2 mm Prop Adapter M6
1 x 25,0 mm 3-BL M4 hydro-propeller (left hydropropeller)
1,308.78EUR
Manufacturers
Manufacturer Info
Hispano Aviacion
Other products
Languages
Español English
Currencies