Top » Catalog » Planes » Turbine » HISPANO AVIACION » BULL MØ1 2.6 » HABULLMo1B

3,950.00EUR

BULL MØ1 2.600mm BLUE
[HABULLMo1B]

BULL MØ1 2.600mm BLUE

An innovative structural design and its original design make the BULL Mo1 original and elegant.
Its NACA shots made by our aeronautical engineers make the Bull Mo1 possibly the most advanced aircraft in the market in terms of the design of "fluid dynamics" on an RC jet.
Fully built in "vacuum technology" with new materials and the most advanced techniques.
The construction quality is higher compared to the standard in the market.
Quick and easy to build.
The large opening at the top allows easy access for the installation of all electronic components and thus can be completely inspected. It has a lower access for the installation and testing of the turbine, with a completely new system for anchoring the turbine.
The flight characteristics are incredible at all speeds, but where it demonstrates its power is in its slow and harmonious flight.
Thanks to this feature, the BULL Mo1 can be flown by novice pilots, but they will delight the most extreme pilots.
The BULL Mo1 has been designed to be used with turbines from 13 Kg to 20 Kg. It is also possible to install a Vector trust to perform 3D maneuvers.
Factory building and custom painting service is available

Wingspan 2.600 mm
Lenght: 2.260 mm
Weigh kit aprox. 6.990 g
Turbine 13 a 20 Kg

under request

Reviews

Categories

* OFFER MONTH *
Planes->
  Aluminium
  Kits constructions
  Electric->
  Gasoline-Glow->
  Turbine->
    AEROFOAM
    BAJA Jets
    BOOMERANG RC-JETS
    GLIDET.IT
    GLOBAL JET CLUB
    GRUMANIA Jets
    HANGAR 9
    HISPANO AVIACION->
      BULL MØ1 2.6
      BULL MØ1 2.6 Accesorios
      ULTIMATUM 1.5 Accesorios
      ULTIMATUM 2.0
      ULTIMATUM 2.0 Accesories
      ULTIMATUM 3.0 Accesories
    JET-TENG MODELS
    JMB Jets Models
    PAF Modellbau
    PILOT RC
    RIPMAX->
    SEBART->
    SKYMASTER
    TopRCModel
  FPV
  VC
  Childrens line
  Aircraft Planes
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

Servo KST BLS905X HV V2.0 8Kg 20mm
93.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

2 x	Size "M" motor holder for class 600
2 x	Fiberglass motor-holder for electric motors
3 x	Bearings for motor HACKER C50
2 x	Central support Speed 600
2 x
1 x	Ø 28 mm fiberglass motor-holder for electric motors
1 x	Fan for A60
2 x	Disipador para motor Hacker B 20 (or motors up to Ø20 mm)
1 x	Motor Mount for Multiplex FunJet
2 x	Frontal support Speed 600
3 x	Ø 38 mm fiberglass motor-holder for electric motors
2 x	Motor holder AXI
2 x	Size "L" motor holder for class 600
2 x	Frontal support Speed 280
3 x	Motor mount for 1200 mm models
3 x	Radial heatsink for MPJ AC25/35-xx motor
3 x	Cooler motor type 400
2 x	Metalic motor holder for class 550-600
2 x	Cooler motor type 280
4 x	Size "M" motor holder for class 400
1 x	Parachute PV6 for F3J
1 x	Para-RC Mix
1 x	Wing OXY 5,0 m2
1 x	Para-RC "RC-Evo-Cross" Rescue
1 x	LUCAS pilot ARTF
1 x	Paramotor BackPack XXS 2
2 x	Indoor motor holder
2 x	A60 Motor Mount Alu complete set
1 x	Militarian pilot "Kamikaze" size 9cm (Slimline)
1 x	67 mm cylidric hinge Ø 5 mm (4 pcs)
1 x	BALSA triangular 6x6x1000 mm
1 x	Hot Glue Stick BLACK
2 x	Motor mount M
1 x	OBECHI sheet 2.0x3.0x1000 mm
1 x	43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x	Gates hinge aluminium (1 pcs)
1 x	Gates hinge
1 x	Ferrita 14x8x5.5 mm
1 x	Piloto jet 130 mm
1 x	PROXXON - SILICON CARBIDE BELTS FOR BSL 220/E
2 x	Beech dowels 4.0 x 1000 mm
1 x	Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m
1 x	Beech dowels 10 mm x 1000 mm
1 x	ARAMID honeycomb 1300x2600x2 mm
2 x	Pin type hinge Al 4,5x70 mm (2 pcs)
1 x	Long pinned hinge (12 uds)
2 x	A50 Motor Mount Alu complete set
1 x	Carbon fibre sleeve 12k 170 mm x 5m
1 x	Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll
1 x	1/6 Pilot "John"
1 x	1/6 Pilot "Cindy"
2 x	Mahogany wood slat 1.5x1.5x1000 mm
1 x	15 mm reinforced hinge
1 x	Flap hinge 33x9 mm (6 pcs)
1 x	Small pinned hinge (12 uds)
1 x	Pin type hinge Al 6x98 mm (2 pcs)
1 x	Liston HAYA 10 x 10 x 1000 mm
1 x	Mahogany wood slat 2.0x2.0x1000 mm
1 x	BALSA triangular 8x8x1000 mm
1 x	Liston HAYA 8 x 8 x 1000 mm
1 x	BALSA trip 2.0x2.0x1000 mm
1 x	Z Bender - S Type Tool
1 x	Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m
1 x	GameCommander USB Universal
1 x	Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M
1 x	Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs)
2 x	Cooler motor type 150
1 x	Round Rod 2,5x1000 mm
1 x	Vacuum pump P1-N
1 x	Strip 1,5x1,5x330 mm
1 x	ABS I Strip 10x5x1000 mm
1 x	Walnut wood slat 2.0x2.0x1000 mm
2 x	Pilot JAN 1/4 Saiplanes
1 x	Strip 3,5x1,75x330 mm
2 x	Fast'n EZ-CA-Hinge, lite (12 uds)
1 x	BALSA triangular 15x15x1000 mm
1 x	67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x	Pilot "Adolf" Legends Series (Slimline)
1 x	ABS Strip 1.5x8.0x1000 mm
1 x	TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m
1 x	Piloto Jet "Red" 1/6 Scale
1 x	ABS Strip 1.5x2.0x1000 mm
2 x	Screwdriver for Torx® TX8
1 x	2,5x60 mm allen screwdriver
1 x	48 mm cylidric hinge Ø 2,5 mm (5 pcs)
2 x	Frontal support Speed 400/480
1 x	Connectors banna gold 5,5 mm (M/F)
1 x	Straightened rod Ø 3.0 mm x 1000 mm
1 x	Aluminium wide washer M3 red (4 pcs)
1 x	Quicklock washer 2.5 mm (10 pcs)
1 x	Straightened rod Ø 1.5 mm x 1500 mm
1 x	Straightened rod Ø 0.5 mm x 1000 mm
1 x	Aluminium cap bolt washer M4 green (8 pcs)
2 x	2 mm male connector (2 pcs) with safety connector
1 x	M2 5Diam short black ball link V2 (2 pcs)
1 x	Blue metalic ball link M2/2 azul (2 pcs)
1 x	Aluminium wide washer M4 Blue (4 pcs)
1 x	ABS tube 6.0x4.0x1000 mm
1 x	Straightened rod Ø 8.0 mm x 1000 mm
1 x	Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm)
1 x	Quicklock washer 4 mm (10 pcs)
1 x	XH female balance (2S) connector (2 pcs)
1 x	Quicklock washer 1 mm (10 pcs)
1 x	Connectors DEANS (T)
1 x	Short ball link M3 (6 uds)
1 x	Steel tube (L 1000 mm Ø6 mm, Ø5,7 mm)
2 x	Size "M" motor holder for class 400
2 x	Motor mount for 1 m models
1 x	Trike XL motor set (motor+esc+prop)
1 x	Paramotor BackPack XXS (without accessories)
1 x	Parachute BACKUP X100
1 x	Windsock Ozone L -1200 mm
1 x	Set cintas unión paracaídas 145 cm
1 x	Futaba 46 mm servo arm with ball link
1 x	FUTABA 20 mm servo arm with ball link
1 x	Futaba 2x20 mm servo double arm
1 x	XTorque CFK Servohebel 38
1 x	Futaba 25 mm servo arm with M3 ball link
1 x	Paramotor Trike XL
1 x	Motor OS 3820-1200 electric
1 x	Parachute P4
1 x	Para-RC Trike "RC-Bullix"
1 x
1 x	Servo Dymond D 37 Eco
1 x	Cables suitable for the motor AC 28/7
1 x	Central support Speed 280
1 x	Cooler motor type 300
1 x	Ø 40 mm fiberglass motor-holder for electric motors
1 x	10 mm gas motor standoff
2 x	Fiberglass motor-holder for electric motors
1 x	Disposable Injector Bags (30x16cm) 100 pcs
1 x	Hot Glue Stick RED
1 x	Starter 12v (Max 180 and 30ccm)
1 x	Starter Sullivan-STAR 603 DINATRON
1 x	Starter EM Gear Power 250
1 x	Hexagonal ball head 2.0 x 50 mm
1 x	ALU servo arm 3 mm shaft
1 x	Gear for D 54
1 x	PROXXON - SANDING BELTS FOR BSL 220/E 120 GRIT (5 pcs)
1 x	Copier 2x20 cm pcs
1 x	Servo Mount M (blue)
1 x	Gold aluminium servo arm V2-JR 1,25" inch M3
1 x	Tarjeta programadora RAY G2
1 x	Servo SAVOX SH 0257 MG
1 x	Robart Door Hinge (Pk2)
1 x	Red aluminium servo arm V1-Futaba 15 mm iM2
1 x	SAVOX SH 1290 MG servo digi
1 x	Pin type hinge Al 3,0x50 mm demount (2 pcs)
1 x	HAWK 100 ARF scale 1:4.75 2480 mm - PAINTED AH106
1 x	Hitec 38 mm servo arm with ball link
1 x	Hitec 30 mm servo rounded arm
1 x	Horizontal mounting servo holder
1 x	4Wx2 Power Navigation Light, 13mm, T-Fuse White
1 x	PowerBox Smokepump
1 x	BALSA leading edge 8x10x1000 mm
1 x	OLED-Display for PowerBox Mercury SRS
1 x	NF-3XL set
1 x	1/7 Pilot "Japanese"
1 x	Conector MT-60 (pair)
1 x	Canadair CL-415 (aero-naut)
1 x	2,0x50 mm allen screwdriver
1 x	Cylidric hinge 43 mm Ø 2,5 mm (5 pcs)
1 x	Servo MKS HV6130
1 x	Pin hinge 39x20 mm (10 uds)
1 x	SAVOX SH 0254 servo
1 x	Cierre cabina aluminio Ø4, I=10 mm
1 x	Nylon hinge 20x15x0,3 (10 pcs)
1 x	Servo MKS 6100 DS
1 x	Servo Mount S (red)
1 x	Servo SAVOX SW-1250 MG digi
1 x	Savox Highvoltage Brushless Servo SB-2272MG (Tail rotor)
1 x	Red aluminium servo arm V3-Futaba 1,0inch
1 x	Large flex hinge (12 uds)
1 x	Servo SAVOX SV-1273 TG
1 x	Gates hinge 30x16 mm (2 pcs)
1 x	Red aluminium servo arm V1-Futaba 23 mm M2
1 x	aluminium servo arm V2-JR 2,0 inch M3
1 x	Gold aluminium servo arm V2-JR 1,0" inch M3
1 x	F-16 Scale 1/6 G3 Airex Deco: AF 916F
1 x	Tank GFK Opus/JEt 300 ml
1 x	OPUS-V / Jet-CC-BF
1 x	Hitec 20 mm servo arm
1 x	Futaba 38 mm servo arm with ball link
1 x	5 line servos wire black (1 m)
1 x	XH male balance (2S) connector (2 pcs)
1 x	F-104 Starfighter USAF (SebArt)
1 x	Walnut wood slat 1.5x1.5x1000 mm
1 x	BULL MØ1 2.600mm "AeroPANDA"
1 x	Batetia LiFe 3200 mAh 6.6v MPX PowerBox
1 x	Dean "T" - Futaba Adapter
1 x	Red 4 mm connector holder
1 x	30 cm DEANS female connector
1 x	XT-60 connector (female)
1 x	Hacker A30-S Radial Set
1 x	Pilot "Anthony" (Slimline)
1 x	Connectors MPX black female
1 x	BALSA trip 5.0x5.0x1000 mm
1 x	200m servo "Premium" wire (white/red/blue)
1 x	Soporte carbono MR30 (2 pcs)
1 x	Connector CAN 15
1 x	F-104 Starfighter Y/B Aniversary(SebArt)
1 x	Extension for SensorSwitch 60cm
1 x	Rafale C (Aero-naut)
1 x	Motor holder for AC 28/7
1 x	8Wx2 Navigation & Strobe, 11mm Green/White
1 x	Linden wood slat 2.0x2.0x1000 mm
1 x	de Havilland Vampire (Rc Factory)
1 x	Pine wood slat 5.0x5.0x1000 mm
1 x	Charging Extension 50cm for 2 Battery
1 x	BALSA trip 3.0x5.0x1000 mm
1 x	BlueCom™ Adapter (Android / WP)
1 x	Piloto JET 1:3,5
1 x	Pine wood slat 1.5x3.0x1000 mm
1 x	Mig-29 "FULCRUM" (RBC Kits)
1 x	XH female balance (7S) connector (2 pcs)
1 x	Extension for LC-Display 50cm
1 x	Mini Avanti S 1.4m white/red
1 x	XH male balance (9S) connector (2 pcs)
1 x	Linden wood slat 3.0x3.0x1000 mm
1 x	Conector XT-30 (macho)
1 x	Pilot "Goose" (Slimline)
1 x	Bag connector 2 mm
1 x	F9F Panther (Aero-naut)
1 x	NF-3 RC set
1 x	BULL MØ1 2.600mm GREEN

25,783.29EUR