Top » Catalog » Planes » Turbine » HISPANO AVIACION » BULL MØ1 2.6 » HABULLMo1APA

4,200.00EUR

BULL MØ1 2.600mm "AeroPANDA"
[HABULLMo1APA]

$BULL MØ1 2.600mm \"AeroPANDA\"$

BULL MØ1 2.600mm "AeroPANDA"

An innovative structural design and its original design make the BULL Mo1 original and elegant.
Its NACA shots made by our aeronautical engineers make the Bull Mo1 possibly the most advanced aircraft in the market in terms of the design of "fluid dynamics" on an RC jet.
Fully built in "vacuum technology" with new materials and the most advanced techniques.
The construction quality is higher compared to the standard in the market.
Quick and easy to build.
The large opening at the top allows easy access for the installation of all electronic components and thus can be completely inspected. It has a lower access for the installation and testing of the turbine, with a completely new system for anchoring the turbine.
The flight characteristics are incredible at all speeds, but where it demonstrates its power is in its slow and harmonious flight.
Thanks to this feature, the BULL Mo1 can be flown by novice pilots, but they will delight the most extreme pilots.
The BULL Mo1 has been designed to be used with turbines from 13 Kg to 20 Kg. It is also possible to install a Vector trust to perform 3D maneuvers.
Factory building and custom painting service is available

Wingspan 2.600 mm
Lenght: 2.260 mm
Weigh kit aprox. 6.990 g
Turbine 13 a 20 Kg

under request

Reviews

Categories

* OFFER MONTH *
Planes->
  Aluminium
  Kits constructions
  Electric->
  Gasoline-Glow->
  Turbine->
    AEROFOAM
    BAJA Jets
    BOOMERANG RC-JETS
    GLIDET.IT
    GLOBAL JET CLUB
    GRUMANIA Jets
    HANGAR 9
    HISPANO AVIACION->
      BULL MØ1 2.6
      BULL MØ1 2.6 Accesorios
      ULTIMATUM 1.5 Accesorios
      ULTIMATUM 2.0
      ULTIMATUM 2.0 Accesories
      ULTIMATUM 3.0 Accesories
    JET-TENG MODELS
    JMB Jets Models
    PAF Modellbau
    PILOT RC
    RIPMAX->
    SEBART->
    SKYMASTER
    TopRCModel
  FPV
  VC
  Childrens line
  Aircraft Planes
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

Electric Landing Gear ULTIMATUM 3.0 (Elektron Re
1,160.39EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
2 x	Tape GFK 38 mm
2 x	RUDDOG Protection and Heat Shield Tape (2mx50mm)
1 x
1 x	SE Ring 350 mm (2 pcs)
1 x	5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
2 x	Tape GFK 50 mm
1 x	Field folding model stand
3 x	Pad self adhesive, up to 3mm / 0.12″, (10 pcs)
1 x	20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	Cinta Goldfix 1m
1 x	Angle measurer
1 x	Medidor ángulos y/o incidencias
2 x	Spikes Band (5 m)
1 x	Field folding model stand SebArt
1 x	Truck-trailer for gliders 720 x 239 mm
1 x	Angle of incidence meter
1 x	20x200 mm battery rings
1 x	Covered closure or fairings
1 x	Stainless steel cable Ø 0.88 mm - 60 kp (10 m)
2 x	Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m
2 x	Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm
1 x	Steering arm 16 mm Ø 3 mm (2 uds)
1 x	Locking cable tie 4.6x203 (uds)
1 x	Crimping sleeves for cable 0.85 mm (10 pcs)
2 x	67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x	Nylon hinge 20x20x0,3 (10 pcs)
1 x	48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs)
2 x	Large flex hinge (12 uds)
2 x	Small pinned hinge (12 uds)
2 x	Nylon hinge 20x15x0,3 (10 pcs)
1 x	Gates hinge aluminium (1 pcs)
1 x	Unmounted aluminium pin 6x98 mm (2 pcs)
1 x	Pin type hinge Al 3,0x50 mm (2 pcs)
1 x	Long pinned hinge (6 uds)
2 x	Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs)
2 x	Gates hinge 30x16 mm (2 pcs)
2 x	Nylon hinge for flaps 33x9 (2 pcs)
1 x	Gates hinge black 30x16 mm (2 pcs)
1 x	33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x	Long pinned hinge (12 uds)
1 x	Aluminium cap bolt washer M3 black (8 pcs)
1 x	Spring lock washer 4.1 mm (20 pcs)
1 x	Circlik for shaft 1.2 mm (10 pcs)
1 x	L-Connector 4.0 mm x 1000 mm
1 x	Civilian pilot "Gramps" size 9cm (Slimline)
1 x	Bidule 55 V3 2460 mm
1 x	Extension silicon 100 cm (Futaba)
1 x	Horn 5/15 with M2 Bearing
1 x	A50 Motor Mount Alu complete set
1 x	Battery LiPo GENS 5500 mAh 2S 7.6V 120C (Gens Ace Hard Case)
1 x	Battery LiPo GENS 5000 mAh 6S 22.2V 60C (Gens Ace)
1 x	Battery LiPo GENS 2200 mAh 4S 14.8v 25C (Gens Ace)
1 x	Battery LiPo GENS 450 mAh 3S 11.1V 25C (Gens Ace)
1 x	Battery LiPo GENS 3300 mAh 3S 11.1v 25C (Gens Ace)
1 x	Battery RX JETI LiIon RB 2600 7.2v
2 x	SE Ring HACKER 300 mm (2 pcs)
1 x	SE Ring 480 mm (2 pcs)
1 x	Tape GFK 25 mm
2 x	Pin type hinge Al 4,5x70 mm to wire (2 pcs)
1 x	Pin type hinge Al 6x98 mm (2 pcs)
1 x	Micro flex hinge (12 uds)
1 x	Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm
1 x	Wing bolts M3 Steel screw blue (2 pcs)
1 x	Press fitting for 0,5 diam. steel cable (10 pcs)
1 x	Cable grommet Ø 6.4 mm (4 uds)
1 x	WingFix ULTRA Black Edition
1 x	Ring 320 mm length (5 pcs)
1 x	Snap for floding prop for 2 mm axi
1 x	80 mm rods set for direction control
1 x	Cockpit latch closing I=10 mm
1 x	45 mm rods + T patellas set for direction control
1 x	Wing bolts M6 Steel screw Red (2 pcs)
1 x	Clip fixing for wing (2 pcs)
1 x	Aluminum Bayonet / strongal D35 mm / 1 m
1 x	Split pin 1.6x16 mm (10 uds)
1 x	SE Ring 250 mm (2 pcs)
1 x	SE Ring 360 mm (2 pcs)
1 x	Pin type hinge Al 4,5x70 mm demount (2 pcs)
1 x	Propeller balancer
1 x	Landing gear frontal support 25x32x16
1 x	67 mm cylidric hinge Ø 4,5 mm (5 pcs)
1 x	Steering arm 12 mm Ø 4 mm (2 uds)
1 x	Allen wheel collar M4x6
1 x	Lead with adhesive (2 pcs)
1 x	15 mm reinforced hinge
1 x	Allen wheel collar M3x3
1 x	Nylon hinge for flaps/gates 27x10,5 (2 pcs)
1 x	76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x	Steering arm 16 mm Ø 4 mm
1 x	Civilian pilot "Curt" size 9cm (Slimline)
1 x	Pilot "Goose" (Slimline)
1 x	Pilot "Duke" Legends Series (Slimline)
1 x	Civilian pilot "Joe" size 9cm (Slimline)
1 x	1/12 Pilot "Cougar"
1 x	Militarian pilot "Fly Boy" size 9cm (Slimline)
1 x	Pilot WWII US Navy Pacific 12" Scale 1/6-1/5
1 x	Pilot "Adolf" Legends Series (Slimline)
1 x	LiPo Storage Box Type "BIG"
1 x	Battery bed V2_S (black)
1 x	Flap hinge (6 pcs)
1 x	Cockpit plastic closing
1 x	1/12 Pilot "Tom"
1 x	Snap pin for micro clevis (10 uds)
1 x	Piloto Jet "Green" 1/6 Scale
1 x	Gates hinge
1 x	Pin type hinge Al 3,0x50 mm demount (2 pcs)
1 x	67 mm cylidric hinge Ø 5 mm (4 pcs)
1 x	Canopy Latch
1 x	25 mm reinforced hinge
1 x	18 mm reinforced hinge
1 x	Fast'n EZ-CA-Hinge (12 uds)

3,073.00EUR