Top » Catalog » Planes » Turbine » HISPANO AVIACION » BULL MØ1 2.6 » HABULLMo1G

3,950.00EUR

BULL MØ1 2.600mm GREEN
[HABULLMo1G]

BULL MØ1 2.600mm GREEN

An innovative structural design and its original design make the BULL Mo1 original and elegant.
Its NACA shots made by our aeronautical engineers make the Bull Mo1 possibly the most advanced aircraft in the market in terms of the design of "fluid dynamics" on an RC jet.
Fully built in "vacuum technology" with new materials and the most advanced techniques.
The construction quality is higher compared to the standard in the market.
Quick and easy to build.
The large opening at the top allows easy access for the installation of all electronic components and thus can be completely inspected. It has a lower access for the installation and testing of the turbine, with a completely new system for anchoring the turbine.
The flight characteristics are incredible at all speeds, but where it demonstrates its power is in its slow and harmonious flight.
Thanks to this feature, the BULL Mo1 can be flown by novice pilots, but they will delight the most extreme pilots.
The BULL Mo1 has been designed to be used with turbines from 13 Kg to 20 Kg. It is also possible to install a Vector trust to perform 3D maneuvers.
Factory building and custom painting service is available

Wingspan 2.600 mm
Lenght: 2.260 mm
Weigh kit aprox. 6.990 g
Turbine 13 a 20 Kg

under request

Reviews

Categories

* OFFER MONTH *
Planes->
  Aluminium
  Kits constructions
  Electric->
  Gasoline-Glow->
  Turbine->
    AEROFOAM
    BAJA Jets
    BOOMERANG RC-JETS
    GLIDET.IT
    GLOBAL JET CLUB
    GRUMANIA Jets
    HANGAR 9
    HISPANO AVIACION->
      BULL MØ1 2.6
      BULL MØ1 2.6 Accesorios
      ULTIMATUM 1.5 Accesorios
      ULTIMATUM 2.0
      ULTIMATUM 2.0 Accesories
      ULTIMATUM 3.0 Accesories
    JET-TENG MODELS
    JMB Jets Models
    PAF Modellbau
    PILOT RC
    RIPMAX->
    SEBART->
    SKYMASTER
    TopRCModel
  FPV
  VC
  Childrens line
  Aircraft Planes
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

ProgBox PRO LCD Hobbywing
44.90EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	CC 01
1 x	CC 02
1 x	Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x	Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
1 x	Copper lacquer wire Ø0,2 mm (5 m)
1 x	3 LiPo XH>EH adapter
2 x	Circlick securite
1 x	Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
1 x	APM2.6 Power module with 5.3V DC BEC
2 x	2 LiPo XH>EH adapter
2 x	30 cm BEC cable (female)
1 x	Black copper lacquer wire Ø0,2 mm (5 m)
1 x	CM-3
1 x	5 LiPo XH>EH adapter
1 x	DPS Switch JR/JR
2 x	3 copper lacquer wire Ø0,2 mm (1 m)
1 x	Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH
1 x	30 cm BEC cable (male)
1 x	4 LiPo XH>EH adapter
1 x	Connector CAN 15
2 x	CC 05
1 x	"Y" charging 4mm wire (2 IN-1 OUT).
1 x	Double conector with JR adapter and 200 mm extension
1 x	Strip ABS 2.0x3.0x1000 mm
1 x	Round Rod 4,0x1000 mm
1 x	Strip ABS 2.0x10.0x1000 mm
2 x	Strip 3,5x1,75x330 mm
1 x	Round Rod 3,0x1000 mm
1 x	Round Rod 6,0x1000 mm
1 x	Strip ABS 2.0x5.0x1000 mm
1 x	Round Rod 1,25x1000 mm
1 x	ABS Strip 1.5x4.0x1000 mm
1 x	ABS Strip 1.0x5.0x1000 mm
1 x	ABS Strip 1.5x8.0x1000 mm
2 x	ABS I Strip 20x10x1000 mm
1 x	ABS Strip 1.0x3.0x1000 mm
1 x	ABS I Strip 10x5x1000 mm
2 x	ABS Strip 1.5x3.0x1000 mm
1 x	Strip ABS 2.0x8.0x1000 mm
1 x	ABS Strip 1.5x6.0x1000 mm
1 x	Strip 2,0x2,0x330 mm
1 x	ABS Strip 1.0x2.0x1000 mm
2 x	Strip 2,5x1,25x330 mm
1 x	Nylon hinge 20x15x0,3 (10 pcs)
1 x	48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs)
1 x	Fast'n EZ-CA-Hinge, lite (12 uds)
1 x	Pin type hinge Al 4,5x70 mm (2 pcs)
1 x	Cylidric hinge 43 mm Ø 2,5 mm (5 pcs)
1 x	Gates hinge aluminium (1 pcs)
1 x	Pin type hinge Al 3,0x50 mm demount (2 pcs)
1 x	Pin type hinge Al 3,0x50 mm (2 pcs)
1 x	Flap hinge (6 pcs)
2 x	33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x	Miniature brass strap hinge, 1 m
1 x	25 mm reinforced hinge
1 x	67 mm cylidric hinge Ø 4,5 mm (5 pcs)
1 x	Nylon hinge 20x20x0,3 (10 pcs)
1 x	Nylon hinge for flaps/gates 27x10,5 (2 pcs)
1 x	15 mm reinforced hinge
1 x	2000A 12V Lithium Jump Starter with 150PSI Air inflator
1 x	Aluminum Bayonet / strongal D12 mm / 0.5 m
2 x	Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm
1 x	Ball link M3 (10 pcs, flat ball)
1 x	Oracover Verde 2 m
1 x	Oracover Yellow CUB 2 m
1 x	Pine wood slat 3.0x10.0x1000 mm
1 x	Pine wood slat 3.0x5.0x1000 mm
1 x	TrainerCord (master-learner)
1 x	Spray Graphit 33
1 x	Bec MR UBEC 5A (5v/6v/7v)
1 x	Adapter lead MPX/EC3
1 x	Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
1 x	PVC 0,35 qmm servos wire Graupner (100 m)
2 x	Red copper lacquer wire Ø0,2 mm (5 m)
2 x	Silicone red 0,25 mm² wire (25 m)
1 x	PH5 adapter for 5mm M8 axi for AXI2820 y 2826
1 x	Frontal Adapter for AXI53xx
1 x	eFuel 30A Power Supply
1 x	43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x	Landing lights 18 mm (0.71in)
1 x	Cover cap drop-shaped paintable 43 mm
1 x	Round Rod 2,5x1000 mm
1 x	Birch plywood plate 600x300x1.5 mm
1 x	Conector MT-60 (pair)
1 x	Combustible Glow "KAVAN" air/heli 15% nitro
1 x	Combustible Glow "KAVAN" air/heli 10% nitro
1 x
1 x	Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm
1 x	Manometer 4 mm
1 x	Aluminum Bayonet / strongal D35 mm / 1 m
1 x	PPM Encoder Module
1 x	Battery LiPo GRE18 600 mAh 7.4v
1 x	Debonder CA 20g
1 x	60 mm aluminium spinner (Kavan)
1 x	Ciano KAVAN Medium 20g
1 x	150 mm inflatable superlight deluxe wheel (2 pcs)
1 x	Conector MR-60 (pareja)
1 x	Male/Female prolonguer for Balancer Thunder Power 6S
1 x	Prolonguer for Balancer Thunder Power 6S
1 x	PSC 6
1 x	USB interface ALTIS
1 x	Connector Sub-D 2+5 Female
1 x	Interruptor RX/Batterie
1 x	Extension 2/3 lipos JST/C
1 x	LED lighting system High Power
1 x	LED blink wire flashing (white - 2pcs)
1 x	Landing gear retract neumatic (Jet Legend)
1 x	LED blink wire flashing (orange - 2pcs)
1 x	Mini neumatic retract 4 mm landing gear (Het-rc)
1 x	LED blink wire flashing (red - 2pcs)
1 x	Bag connector 2 mm
1 x	Starter EM Gear Power 80
1 x	Silicone 0,14 qmm servos wire Graupner (100 m)
1 x	Cabel "Y" 30 cm (graupner)
1 x	Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
1 x	PVC 0,14 qmm servos wire Graupner (100 m)
1 x	Spinner Alumin. fixed propeller 40 mm / 3,0 mm
1 x	Silicone 0,25 qmm servos wire Graupner (100 m)

2,368.05EUR