Top » Catalog » Planes » Turbine » HISPANO AVIACION » BULL MØ1 2.6 » HABULLMo1R

3,950.00EUR

BULL MØ1 2.600mm RED
[HABULLMo1R]

BULL MØ1 2.600mm RED

An innovative structural design and its original design make the BULL Mo1 original and elegant.
Its NACA shots made by our aeronautical engineers make the Bull Mo1 possibly the most advanced aircraft in the market in terms of the design of "fluid dynamics" on an RC jet.
Fully built in "vacuum technology" with new materials and the most advanced techniques.
The construction quality is higher compared to the standard in the market.
Quick and easy to build.
The large opening at the top allows easy access for the installation of all electronic components and thus can be completely inspected. It has a lower access for the installation and testing of the turbine, with a completely new system for anchoring the turbine.
The flight characteristics are incredible at all speeds, but where it demonstrates its power is in its slow and harmonious flight.
Thanks to this feature, the BULL Mo1 can be flown by novice pilots, but they will delight the most extreme pilots.
The BULL Mo1 has been designed to be used with turbines from 13 Kg to 20 Kg. It is also possible to install a Vector trust to perform 3D maneuvers.
Factory building and custom painting service is available

Wingspan 2.600 mm
Lenght: 2.260 mm
Weigh kit aprox. 6.990 g
Turbine 13 a 20 Kg

under request

Reviews

Categories

* OFFER MONTH *
Planes->
  Aluminium
  Kits constructions
  Electric->
  Gasoline-Glow->
  Turbine->
    AEROFOAM
    BAJA Jets
    BOOMERANG RC-JETS
    GLIDET.IT
    GLOBAL JET CLUB
    GRUMANIA Jets
    HANGAR 9
    HISPANO AVIACION->
      BULL MØ1 2.6
      BULL MØ1 2.6 Accesorios
      ULTIMATUM 1.5 Accesorios
      ULTIMATUM 2.0
      ULTIMATUM 2.0 Accesories
      ULTIMATUM 3.0 Accesories
    JET-TENG MODELS
    JMB Jets Models
    PAF Modellbau
    PILOT RC
    RIPMAX->
    SEBART->
    SKYMASTER
    TopRCModel
  FPV
  VC
  Childrens line
  Aircraft Planes
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

DUPLEX backpack for Jeti DS handheld transmitter
58.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	Dremel 3000 130W
1 x	Disposable Injector Bags (30x16cm) 100 pcs
1 x	Digital precision scale up to 2000 g
1 x	3,0x60 mm allen screwdriver
1 x	Fresa corte diamante Ø 1.0mm (bola)
1 x	22 mm Cut Disc Proxxon/Dremmel
1 x	Ball Link Plier
1 x	Cut tube
1 x	Digital scale up to 40 kg
1 x	25 mm Sandpaper file
1 x	2,0x50 mm allen screwdriver
1 x	Extra Hard Titanium Herxagon Screwdrivers
1 x	Crimping tool
1 x	Dremel PERMAGRIT 18 mm round lime
1 x	55% silver electrodes (2 pcs)
1 x
1 x
1 x	1,5x50 mm allen screwdriver
1 x	Copier 2x20 cm pcs
1 x	Dremel PERMAGRIT thin lime
1 x	Dust collector for mould cleaning
1 x	Concave-Convex sandpaper file 13 mm
1 x	Fresa corte diamante Ø 1.4mm (bola)
1 x	Fresa corte diamante Ø 2.35mm (lentil)
1 x	Fabric scissors curved (offset handles), 16 cm / 6" length
1 x	2,5x60 mm allen screwdriver
1 x	Fabric scissors curved Premium, 16 cm / 6" length
1 x	Steering arm 16 mm Ø 4 mm
1 x	Covered closure or fairings
1 x	Crimping sleeves for cable 1.3 mm (10 pcs)
1 x	Straightened rod Ø 6.0 mm x 1000 mm
1 x	Stainless steel cable Ø 1.3 mm (10 m)
1 x	Electric spoiler 250 mm (2 pcs)
1 x	SUS wire 3m (nylon coated)
1 x	Brass hexagonal rod Ø 3.5 mm x 1000 mm
1 x	Straightened rod Ø 1.5 mm x 1000 mm
1 x	Screw-lock connector Ø 2 mm (2 uds)
1 x	One touch canopy lock
1 x	Screw-lock pushrod conn snap Ø 1.5 mm (2 uds)
1 x	Micro screw-lock pushrod conn snap Ø 1 mm (2 uds)
1 x	Straightened rod Ø 4.0 mm x 1000 mm
1 x	Straightened rod Ø 4.5 mm x 1000 mm
1 x	Steering arm 16 mm Ø 3 mm
1 x	Straightened rod Ø 8.0 mm x 1000 mm
1 x	Locking cable tie 3.2x142 (uds)
1 x	Stainless steel cable Ø 0.52 mm - 15 kp (10 m)
1 x	Locking cable tie 4.6x203 (uds)
1 x	Steering arm 12 mm Ø 3 mm (2 uds)
1 x	Cap closure 33/23.5mm (2 uds)
2 x	Straightened rod Ø 5.5 mm x 1000 mm
1 x	Straightened rod Ø 1.2 mm x 1500 mm
1 x	Crimping sleeves for cable 0.70 mm (10 pcs)
1 x	Canopy Lock V1 M3 Red (2 pcs)
2 x	Straightened threaded rod M2-1m
1 x	Cierre cabina aluminio Ø4, I=10 mm
1 x	Brass hexagonal rod Ø 5 mm x 1000 mm
1 x	Cockpit plastic closing
1 x	Straightened rod Ø 3.0 mm x 1000 mm
1 x	Brass rod Ø 1.0 mm x 1000 mm
1 x	Brass hexagonal rod Ø 4 mm x 1000 mm
1 x	Vertical cockpit anchor "tipe F3A" (2 pcs)
1 x	Brass rod Ø 1.5 mm x 1000 mm
1 x	Brass hexagonal rod Ø 3 mm x 1000 mm
1 x	Straightened rod Ø 0.8 mm x 1000 mm
1 x	Screw-lock connector M2 (2 uds)
2 x	Marker ties (20 pcs)
1 x	SE Ring 360 mm (2 pcs)
3 x	RUDDOG Protection and Heat Shield Tape (2mx50mm)
2 x	10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	SE Ring HACKER 300 mm (2 pcs)
2 x	SE Ring 300 mm (2 pcs)
1 x	Pad self adhesive, up to 3mm / 0.12″, (10 pcs)
2 x	SE Ring 200 mm (2 pcs)
3 x	SE Ring 350 mm (2 pcs)
2 x	SE Ring 450 mm (2 pcs)
2 x	SE Ring 250 mm (2 pcs)
1 x	13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	20x1000 mm Ring Strap Back To Back
3 x	26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs)
1 x	SE Ring 330 mm (4 pcs)
2 x	20x200 mm battery rings
1 x	BALSA trip 2.0x10.0x1000 mm
2 x	BALSA triangular 6x6x1000 mm
1 x	Pine wood slat 10x10x1000 mm
1 x	Beech dowels 10 mm x 1000 mm
1 x	Pine wood slat 3.0x10.0x1000 mm
1 x	BALSA triangular 8x8x1000 mm
1 x	Liston HAYA 8 x 8 x 1000 mm
2 x	Mahogany wood slat 2.0x2.0x1000 mm
1 x	Beech dowels 2.0 x 1000 mm
1 x	Linden wood slat 2.0x2.0x1000 mm
1 x	Walnut wood slat 1.5x1.5x1000 mm
2 x	Pine wood slat 2.0x10.0x1000 mm
1 x	BALSA leading edge 8x10x1000 mm
1 x	Pine wood slat 3.0x7.0x1000 mm
1 x	Pine wood slat 5.0x5.0x1000 mm
1 x	BALSA trip 3.0x3.0x1000 mm
1 x	Liston HAYA 10 x 10 x 1000 mm
1 x	Conector Servo female 4 pines
1 x	Socket head long ball link M3 (2 uds)
1 x	Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
1 x	Motor DLE 430 cc - Paramotors
1 x	Glases Ace
1 x	Cable grommet 9.5 mm (4 uds)
1 x	Aluminun wheel collar 5 mm Ø (4 uds)
1 x	Canopy Latch
2 x	Aro pasacable Ø20 mm (4 pcs)
1 x	Tube support Ø 6mm (10 pcs)
2 x	Fuselage Autogyro RAINBOW
2 x	Tail tube RAINBOW
1 x	IKARUS plane
1 x	Blade holder center
1 x	Rudder
2 x	Head lower part
1 x	Servo Fork
1 x	Blade holder upper
1 x	Screw M3x16
1 x	Wheel keeper washer
2 x	Raer wall
1 x	14x60 mm Mini rings Tie Wraps (4 pcs)
2 x	SE Ring 400 mm (2 pcs)
2 x	120x60 mm SLH KOVO wheel
1 x	Tape GFK 25 mm
1 x	Tape GFK 50 mm
1 x	PPM Encoder Module
1 x	SE Ring 240 mm (2 pcs)
1 x	Crimping sleeves for cable 0.85 mm (10 pcs)
1 x	Canopy Lock V1 M3 Blue (2 pcs)
1 x	Blade holder metal LAMA
1 x	"S" set for planes
1 x	Spring lock washer 4.1 mm (20 pcs)
1 x	Lock washer 2.2 mm (20 pcs)
1 x	Motor Mega AC 16/07/12
1 x	Motor Mega AC 16/25/04 COMBAT
1 x	MEGA AC 16/10/03 Race + PG 5:1 F5J motor brushless
1 x	Motor Mega AC 16/25/02
1 x	Blade Holder (3 blades)
1 x	Dean-T Plug Mold
1 x	Beech dowels 3.0 x 1000 mm
1 x	Red 3m5 mm connector holder
1 x	Lite Plywood panel 600x300x2.0 mm
1 x	BALSA triangular 10x10x1000 mm
1 x	MPX PCB "6 Pins", 5 pieces
1 x	BALSA triangular 15x15x1000 mm
1 x	Trailing edge BALSA 35x8x1000 mm
1 x	Birch plywood plate 600x300x4.0 mm
1 x	XT-60 connector (male)
1 x	MPX Support
1 x	Plywood sheet BEECH 600 x 300 x 2,0 mm
1 x	BALSA trip 2.0x2.0x1000 mm
1 x	Balsa panel 1.5x100x1000 mm
1 x	MPX PCB "4 Pins", 5 pieces
1 x	Rotorshape Autogyro
1 x	Support Flush MPX Conector (6 pcs)
1 x	Support pump Xicoy X45
1 x	Connectors banna oro 8,0 mm (Male) 5 pcs.
1 x	Battery charging cable XT60
1 x	JETImodel Addcap 1640
1 x	Axle for motor A50-L
1 x	Support XT60 conector (2 pcs)
1 x	Soporte filtro FESTO (4 pcs)
1 x	Aro pasacable Ø25 mm (4 pcs)
1 x	Soporte grifo FESTO (2 pcs)
1 x	Pasacables rectangular 40x15 mm (4 pcs)
1 x	Support Filtro FESTO
1 x	Support ECU Xicoy X-45
1 x	Tapa estado carga XT-60 (6 pcs)
1 x	Blade Holder Full (3 blades)
1 x	Piñon motor rotor LA-500
1 x	Cable adapter iCharger
1 x	Propadapter for motor A60-V2
1 x	Backmountset complete A40
1 x	Shaft for A60-L V4
1 x	Shaft for A60-L (140mm)
1 x	Spikes Band (5 m)
1 x	5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	Fully Threaded Steel Rod alumin 40 mm M3 (2 pcs)
1 x	Motor Mega AC 16/07/03
1 x	Motor Mega AC 16/20/02
1 x	Cinta Goldfix 1m
1 x	20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	BULL MØ1 2.600mm GREEN
1 x	BULL MØ1 2.600mm ORANGE

15,531.49EUR