1,850.00EUR

Boomerang SPRINT V2 Red/White/Blue


Technical information:
Wingspan: 2006 mm / 79 inches
Length: 1880 mm / 73 inches
Weight with full fuel 14kg / 29lbs
Combo included E-retracts
Turbine 80 to 120 size (not included)
5 Channles / 7 servos(not included)

The Boomerang Sprint is by far the workhorse of the Boomerang Squadron. Suitable for the 80 to 120 size range of turbines The Sprint is an all wood ARF jet trainer that has trained hundreds, maybe even thousands of turbine enthusiasts. But don’t be fooled by the “Trainer” label. The Sprint is a very capable aerobatic jet that will give countless thrills when you push it through an aerobatic routine. From rolling circles and stall turns, the Sprint can do it all. And when you’re ready to land it will slow down to a crawl for those short field landings. Being an all wood airframe, covered in genuine OraCover film, should you have that unfortunate bump in the road it is easily repaired using basic building skills and materials. You’ll be up and flying again in no time. Whether this is your first jet or your tenth jet, no hangar is complete without a Boomerang Sprint in it. The kit includes a complete set of all electric landing gear which are robust and will provide years of service. The brakes are also electric and with the included controller setup is a breeze. All push rods and hardware are included. Kit comes with a 3.7 litros / 125 ounce composite fuel tank.


Comentarios
Aceptamos
Búsqueda Rápida
 
Use palabras clave para encontrar el producto que busca.
Búsqueda Avanzada
1 x Bungee HLG Premium
3 x Gafas Aspen
2 x Gafas Flitemaster
1 x Gafas Nimbus "Black"
3 x Cinta fibra carbono 50 mm 3k 200 g/m2 x 10m
2 x Cuña desmoldeo roja (5 pcs) [40x20mm]
1 x AIREX® M060 lámina (amarilla) 1200x550x2,0 mm (10 pcs)
2 x Fibra carbono 3k tela 160g/m2 100 cm x 5m
1 x Fibra carbono tela 160g/m2 100 cm x 3 m
2 x Cinta fibra Carbono 125 g/m², 3k, UD (50 mm) roll/ 20 m
2 x Cinta fibra de vidrio 49 g/m2 5cm x 100m (plain weave)
2 x Cinta de sellado al vacío, 2,5 x 12 mm (hasta 140 ° C) 22 rollos
2 x AIREX® M060 lámina (amarilla) 1200x550x4,0 mm (5 pcs)
3 x Cinta fibra de vidrio 130 g / m² (Silane, liso) 25 mm, 50m
1 x Cinta fibra carbono 25 mm 3k 125 g/m2 x 10m
2 x Fibra carbono tela 160g/m2 100 cm x 2 m (twill weave)
1 x Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m
1 x Tubo carbono 3K-PW (Ø25 mm, Ø21 mm L:1000 mm)
1 x Prolongador S-Bus 1-2 silicona 30 cm
1 x Spray adhesivo "INFUTAC" 500 ml
1 x Soporte WingFix ULTRA BE
1 x Servo RHINO pro SHV digi 4
1 x Tapa de servo micro-mini 57 mm
1 x Servo MKS 6100 DS
1 x Brazo servo MKS Metal M3-L:30 (2 pcs)
1 x Brazo servo Alu 90º eje 3 mm
1 x Servo HITEC D-955 TW Titanium
1 x Servo HITEC HS-225 MG
1 x Servo GO-13 MG 13g 2.8 Kg 0.12s/60º
1 x Servo GO-12S69MG 26kg.cm 0.10s/60º
1 x Servo HITEC HS-485 HB
1 x Brazo servo doble aluminio V3-Hitec 3-3,5" azul
1 x Servo AN-8 HBA
1 x Servo HITEC HS-5087 MH
1 x Servo FUTABA SBL 471 SV
1 x Servo FUTABA BLS 276SV
1 x Servo MKS HV6150 "anclaje horizontal"
1 x Servo KST BLS825 V8.0 HV 35Kg 8.4v
1 x Tester servo Profesional
1 x Conector de seguridad para servos (2 pcs)
1 x Fija tornillos IC-Loc™ Azul "medio" 10 ml
1 x Ciano INSTA - CURE™ (56g)
3 x Gafas Zurich Sport Sunglasse Dark Sensity BROWN
1 x Gafas Nimbus
1 x Gafas Moritz
1 x Fibra de vidrio 25 g/m² (1 m²)
1 x Cinta carbono TeXtreme 38 g/m2 IM UD 20mm x 100 m
1 x Plancha carbono 550x350x1.0 mm ECOTECH
1 x Cinta fibra Carbono 125 g/m², 3k, UD (100 mm) roll/ 50 m
1 x Bateria DJI Mini 2 2250 mAh
1 x Plancha carbono 550x350x1.5 mm ECOTECH
1 x Plancha carbono 1000x500x2,0 mm ECOTECH
1 x Cinta Roving carbono 20m
1 x AIREX® M060 lámina (amarilla) 1200x550x2,0 mm (20 pcs)
2 x Cinta de sellado al vacío, 2,5 x 12 mm (hasta 140 ° C) 15 m
1 x Cinta fibra carbono 25 mm 3k 125 g/m2 x 50m
1 x Fibra carbono tela 240g/m2 100 cm x 5 m
1 x Plancha ABS 500 x 400 x 1,5 mm (blanco)
1 x Fibra carbono "MANGA" 12k 170 mm x 5 m
1 x Fibra de vidrio picada 3mm (200g)
1 x Fibra carbono tela No-cruzada ST 200g/m2 50 cm x 20 m
1 x DJI FPV Combo
1 x Polea de bronce 5/1,5 (2 pcs)
1 x Pull-Pull set completo acero inox. 3 m (max 20 kg)
1 x Pin 2,0 para terminales riostras M2,0 ⌀ (6 pcs)
1 x linea kevlar Ø 0,5 mm para pull pull (3 m)
1 x Kwik link con brazo M5xM2,5xL30
1 x Polea de bronce 14/2 (2 pcs)
1 x Terminales riostras M6x66 (2 uds)
1 x Plancha termoformable 0,5 mm (0,02") DIN A4
1 x Repelente agent PVA 250 ml
1 x Plancha fibra vidrio 350x150x0.3 mm
1 x Plancha ABS 500 x 400 x 0,5 mm (blanca)
1 x Fibra carbono tela 160g/m2 100 cm x 25 m
1 x Plancha PVC 320 x 194 x 0,23 mm (marrón)
1 x Plancha carbono 350x150x1.0 mm
1 x Film perforado 100 cm / 10 m
1 x Plancha aluminio 500x250x0.5 mm
1 x Fibra carbono tela 160g/m2 127 cm x 10 m
1 x Fibra carbono tela 240g/m2 100 cm x 20 m
1 x Cinta fibra Carbono 125 g/m², 3k, UD (50 mm) roll/ 10 m
1 x Fibra carbono tela 160g/m2 100 cm x 10 m
1 x Fibra vidrio 80g/m2 (100cm x 1m) cruzada
1 x Ciano INSTA - FLEX+™ (25g)
1 x Fundas BULL Mo1 2.6m de "Luxe"
1 x Boomerang SPRINT V2 Yellow/Black
1 x PC-21 2880 mm Cono azul 5 palas
1 x PC-21 2880 mm Propeller 5 blade 20x10 K45TP Scale composite
1 x MIRAGE 2000 TIGER PNP
1 x L-39 Albatros Scale 1:4.75 1991 mm
1 x Servo MKS HV69
1 x F4 Phantom Scale 1:7, Tren retractil electrico
1 x ULTIMATUM 2.0 m red/black
1 x ASPIRE Red ARF 2.000 mm, Parte Frontal Fuselaje
1 x F9F COUGAR Red ARF 1.562 mm
1 x Servo MKS HV1220
1 x ULTIMATUM 2.0 PRO "Full Carbon Red"
1 x Servo KST BLS915 HV V8.0 25Kg 20mm 78g
1 x Brazo servo aluminio KST 25T-5V2,3515,325,125,135,145X10,X12,A13
1 x Servo KST X10 MINI ala 10mm 23g 7.5Kg
1 x Servo BMS-4112
1 x Servo KST X20-7512 V8.0 82kg 8.4v
1 x Bahía de la batería
1 x Elevador Cierva C30
1 x Parte superior del rotor
1 x Núcleo del buje del rotor
1 x Palanca del cíclico LA500
1 x Carena delantera LA500
1 x Soporte cental de las palas del rotor
1 x Autogiro LA500
1 x Servo FUTABA S 9670 SV
1 x Caja servo BLS-152 / 172
1 x RANGER Jet Red/Yellow 1.854 mm combo
1 x Tren aterrizaje Electrico BULL Mo1 2.6 GS-200 (Electron Retracs
1 x PC-21 2.880 mm WHITE/RED
1 x Tren aterrizaje Electrico BULL Mo1 2.6 (Electron Retracs)
1 x FELIX JR Yellow/Black 1750 mm
1 x FELIX SportJet Yellow 2200 mm
1 x PC-21 2.880 mm SINGAPUR scheme
1 x PC-21 2880 mm Cono rojo 5 palas
1 x PC-21 2.880 mm BLUE French Army Scheme
1 x BOEING (TX) T-7A RED HAWK
1 x PC-21 2.880 mm (w/o oracover)
1 x PC-21 XXL Fundas
1 x Tren electrico JP FELIX JR
1 x Deposito BULL MØ1 (3.2 L) + 1x (0.9 L) + 1x (0.9L Smoke) PRO
1 x MB339 CANADA PNP 1790 mm
1 x RANGER Jet NAVY 1.854 mm combo
1 x Bayoneta BULL MØ1 2.600mm
1 x Tren aterrizaje Electrico "Black Edition" BULL Mo1 2.6 GS200 (El
52,786.12EUR
Fabricantes
Información del Fabricante
Boomerang RC-JEts
Otros productos
Idiomas
Español English
Monedas