1,390.00EUR

TURBINATOR 2 BLUE AND YELLOW 1778 mm Combo


The New Turbinator 2 by Boomerang RC Jets is the baby brother to the larger Turbinator sport jet.
Designed around the popular 60 size turbine this little jet is blast to fly.
With Spirited performance and slow landing speeds it is sure to become a fan favorite without breaking the piggy bank.
The Air-frame is of all wood construction and weighs in at around 6.5 kg without fuel.
Covered in OraCover film it is available in 3 striking color schemes. And should you have a bump in the road and need repairs, with only some basic skills and materials you can bu flying again.
The kit comes with a robust set of electric gear and brakes with the controller. No need to fuss with a pesky air system here. This gear set is a drop in fit and the steering servo is mounted right on the nose gear for direct drive steering. No more pesky cables to mess with on the steering. The gear requires a 2s LiPo or LiFe battery and you can tap power from you main batteries to operate the gear since the power draw if very small.
Here is a YouTube link of the maiden flight: https://www.youtube.com/watch?v=EbEOM72d1Ro

Technical characteristics
Wings Span: 1778 mm
Lengt: 1750 mm
Wing Aerea: 44 dm2
Combo included E-retracts
Channesl 9 and 8 servos requiered (not included)
Turbine recommended: 6 - 8 kg (not included)
Requires a 60 ounce Dubro fuel Tank not included


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Motor A2212/13T
1 x A40-10S V2 8-Pole + 6,7:1 PG
1 x Size "M" motor holder for class 600
1 x Motor holder AXI
1 x Size "M" motor holder for class 400
1 x Micro flex hinge (12 uds)
1 x Bungee HLG Premium
1 x 2,4x1000 mm 2:1 green termoretract tube
1 x Softshell Hispano Aviación
1 x 4,8x1000 mm 2:1 blue termoretract tube
1 x 1/4 Pilot "Heidi"
1 x 6,4x1000 mm 2:1 green termoretract tube
1 x 1/12 Pilot "Cougar"
1 x Glases Flitemaster
1 x 4 mm M3 red control terminal (4 pcs)
1 x Motor Mega AC 22/45/03 E
1 x Carbon fiber rod 0.5 mmx1000 mm
1 x Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs)
1 x Sun Cover BULL Mo1 2.6 (Hispano Aviacion)
1 x Profile ABS half cane 6.0x1000 mm
1 x Aluminium cap bolt washer M3 black (8 pcs)
1 x Horn DUBRO 1/2A
2 x Rubber profile 10-2 mm 2M
1 x Rubber profile 6-2 mm 2M
1 x KIRA 480-38 5,2:1
1 x Carbon fibre sandwich sheet 350x150x3 mm
1 x Motor Mega AC 16/15/04 COMBAT
1 x Aluminium coupler M3/2 with ball bearing (1 pcs)
1 x Carbon fibre sleeve 12k 170 mm x 5m
1 x L-Connector 1.0 mm x 1000 mm
1 x KIRA 400-39 5,2:1
1 x Carbon fiber rod 1.0 mm x 1000 mm
1 x Crimping sleeves for 1.1 mm cable (10 pcs)
1 x Horn 6/20 with M3 Bearing
1 x Carbon fiber rod 12 mm x 1000 mm
1 x KIRA 600-24 6,7:1
2 x Motor Mega AC 16/25/02
1 x ABS angle 1.5x1.5x1000 mm
1 x AXI 2814/16 V2 Long
1 x Carbon fiber rod 0.5 mmx1000 mm
1 x Aluminium cap bolt washer M4 green (8 pcs)
1 x DRIVE 510 (KIRA 480-34 5,2:1 + Koby 55 LV)
2 x Profile ABS half cane 8.0x1000 mm
1 x ABS angle 4,0x4,0x1000 mm
1 x Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 1,6 mm
1 x Blind nut M4 (4 pcs)
1 x Landing gear axle Ø 6 mm (2 uds)
1 x 20x200 mm battery rings
1 x 800TVL CMOS camera for FPV
1 x 140 mm rods set for direction control
1 x RUDDOG Protection and Heat Shield Tape (2mx50mm)
1 x Marker ties (20 pcs)
1 x Motor XPOWER F2919/10 F5J Light
1 x Cierre cabina aluminio Ø5, I=16 mm
1 x Landing gear axle Ø 4 mm (2 uds)
1 x Aluminum Bayonet / strongal D25 mm / 1 m
1 x SE Ring 450 mm (2 pcs)
1 x XPower XC5030/14 LS
1 x Xplorer3 anemometro
1 x Short ball link M1.6 (6 uds)
1 x BALSA triangular 8x8x1000 mm
1 x Straightened rod Ø 1.5 mm x 1000 mm
1 x Long ball link M2 (6 uds)
1 x Straightened rod Ø 1.0 mm x 1000 mm
1 x Brass hexagonal rod Ø 3.5 mm x 1000 mm
1 x Parachutist
1 x Straightened rod Ø 6.0 mm x 1000 mm
1 x Initior Receiver FRX2 Wireless
1 x Straightened rod Ø 2.0 mm x 1000 mm
1 x Smoke set "M"
1 x Beech dowels 2.0 x 1000 mm
1 x Support Flush MPX Conector (6 pcs)
1 x Straightened rod Ø 14.0 mm x 1000 mm
1 x AX-60 starters (5 pcs)
1 x Support XT60 conector (2 pcs)
1 x Liston HAYA 3 x 10 x 1000 mm
1 x Straightened rod Ø 8.0 mm x 1000 mm
1 x Pine wood slat 6.0x6.0x1000 mm
1 x Support conector MPX (6 pcs)
1 x Walnut wood slat 3.0x3.0x1000 mm
1 x Black smoke bombs AX-60 (5 pcs)
1 x Pine wood slat 2.0x10.0x1000 mm
1 x Support FUEL DOT V3
1 x Straightened rod Ø 1.5 mm x 1500 mm
1 x Ball link M3 (6 uds)
1 x Linden wood slat 2.0x2.0x1000 mm
1 x Recessed MPX connector support (6 pcs)
1 x Socket head long ball link M3 (2 uds)
1 x M2 5Diam short black ball link V2 (2 pcs)
1 x Support pump Xicoy X45
1 x M2/M1/6 3Diam long black ball link V1 (6 pcs)
1 x Smoke set "Glider"
1 x Fiberglass motor-holder for electric motors
1 x Size "M" motor holder for class 400
1 x Ø 28 mm fiberglass motor-holder for electric motors
1 x Angle of incidence meter
1 x Motor holder for AC 28/7
1 x Indoor motor holder
1 x Field folding model stand
2 x Motor Mega AC 16/07/12
1 x Carbon fiber rod 4.0 mmx1000 mm
1 x Carbon fiber flat 1000x3.0x1.0 mm
1 x Motor Mega AC 16/15/03
1 x Motor Mega AC 16/25/01E 3.17mm
1 x Nylon Screw M5x30
1 x Motor Mega AC CAR 10 PRO
1 x Motor Mega AC 16/07/06
1 x Glass fabric tape 225 g/m² (Silane, plain) 40 mm X 100m
1 x Quicklock washer 1 mm (10 pcs)
1 x Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll
1 x Pan Head Screw M1,6x8 (10 pcs)
1 x Motor Mega AC 16/15/05 CE F5J
1 x Teflon rollers 40 mm x 15 mm Diam.
1 x Quicklock washer 4 mm (10 pcs)
1 x Styrene plate 320x120x0.5 mm
1 x Motor Mega AC 16/15/07 COMBAT
1 x Screw M3x20 (10 pcs)
1 x Set Legs + Wheels with brake ASPIRE
1 x Connectors MPX male
1 x Manual Controller
1 x Boomerang SPRINT V2 Red/Yellow
7,949.88EUR
Manufacturers
Manufacturer Info
Boomerang RC-JEts
Other products
Languages
Español English
Currencies