900.01EUR

CYCLONE XT 6.2m ARF
[ROBBE2665]


CYCLONE XT 6.2m ARF

Description "Robbe Modellsport Cyclone XT 6,2M ARF mit GDRP FUSELAGE 4-piece wing with abachi planking"
The CYCLONE XT is the consistent further development of its predecessor CYCLONE. With an incredible wingspan of 6,20m, it is the giant in the electric glider sky! The epithet XT stands for "extended". The model has a painted GRP fuselage and two 2-piece wings with Abachi planking and GRP carpet pad. Its new LS 6330-15 brushless drive is rated for 8S LiPo operation for powerful climbs and easy takeoff from the launch trolley.
The outer wing design, electrical wing mating using MPX connectors in mounting frames and the new LS 6330-15 long shaft drive motor are the main features of the new Cyclone XT, along with the increased wingspan. The canopy latch has been moved to the rear under the wing/fuselage moldings as is common with large scale model gliders.
The successful HQ/W airfoil has been left in place. It runs from an HQ/W-2.5/12 at the root rib to an HQ/W-2.5/11 in the center and finishes at the winglet with an HQ/W-3/10.5. This is an excellent way to fly extended thermal flights, as this is the CYCLONE XT's profession. The flight characteristics are as usual good-natured and quiet.

Features:
- New Ro-Power Torque LS 6330-15 drive for 8S LiPo (PNP version only).
- Two-piece fuselage made of GFRP/Kevlar reinforced with CFRP
-Wings completely covered with abachi for high compressive strength
-Ready covered with ORACOVER®
-Four-part wing, separable
-Wings pluggable with MPX connectors in mounting frame for electrical connection (PNP version only)
-Solid 14x500mm round steel mating of the inner surfaces, 12x375mm carbon mating for the outer wings
-Middle wings on the upper side completely underlaid with 200g carbon fabric, underside 80g glass fabric
-Outer wings completely underlaid with 80g glass mat
-New canopy lock under wing
-High quality M3 linkage accessories Made in Germany
- Stable elevator linkage with 5/3 mm CFRP tube and M3 clevises
-Reinforced tail construction
-Continuous sandwich spar (carbon-pine-carbon) for maximum bending stiffness
-Precisely fitted anti-twist devices in all wing sections
-High degree of prefabrication

Technical data
Airfoil: HQW
Building Skill: Fortgeschritten
Control: H,S,Q,M,WK
Drive Type: Electro
Flight Skill: Profi
Flight weight approx. (g): 11400
Fuselage: Fiberglass/Carbone
Length (mm): 2250
Manufacturer: Robbe
Rec. battery: 8S/5000-7000mAh LiXX
Rec. engine: Ro-Power Torque LS 6330-15
Version: ARF - ALMOST READY TO FLY
Wing-span (mm): 6200
Wings: Styro/Glass/Abachi

Box contents
- Model CYCLONE XT largely prefabricated
- Two-piece fuselage made of GRP/Kevlar CFRP reinforced
- Abachi planked wings, GRP/CFRP reinforced
- Ready covered with ORACOVER
- Assembly instructions in German/English/French

Das Produkt Cyclone XT 6,2M ARF mit GFK Rumpf, von Robbe Modellsport in der Kategorie Electric Glider Models hat eine Spannweite von 6200 sowie ein Gewicht von 11400. Die Steuerung des Modells erfolgt über die Funktionen H,S,Q,M,WK. Das Modell ist als ARF - ALMOST READY TO FLY ausgeführt . Wir empfehlen einen 8S/5000-7000mAh LiXX Akku für dieses Elektroflugmodell.



Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x TrainerCord (master-learner)
1 x "Y" charging 4mm wire (2 IN-1 OUT).
2 x CC 05
1 x Red copper lacquer wire Ø0,2 mm (5 m)
1 x Copper lacquer wire Ø0,2 mm (5 m)
1 x CellPRO 4S Adaptader (GP/KO up to 4S)
1 x Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
1 x Circlick securite
1 x Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
1 x 30 cm BEC cable (female)
1 x JETImodel SINGLE BEC
1 x DUPLEX USBa USB-Adapter for Jeti Duplex Items
1 x 2 LiPo XH>EH adapter
1 x Black copper lacquer wire Ø0,2 mm (5 m)
1 x Carbon fiber rod 1.0 mm x 1000 mm
1 x Carbon fiber rod 6.0 mmx1000 mm
1 x Carbon fiber flat 1000x6.0x0.8 mm
3 x EVP Unit for AXI2208/xx and 2212/xx
2 x Carbon fiber rod 2.0 mmx1000 mm
1 x Carbon fiber rod 3.0 mm x 1000 mm
1 x Carbon fiber flat 1000x3.0x1.0 mm
1 x Carbon fiber flat 1000x3.0x0.13 mm
1 x Squared carbon wing joinner 5x5x220 mm
1 x Carbon fiber rod 7.0 mmx1000 mm
1 x Carbon fiber flat 1000x3.0x0.5 mm
1 x Carbon fiber rod 5.0 mmx1000 mm
1 x Carbon rectangular rod 10.0 mm x 1.0 x 1000 mm
1 x Extractor piñones 2.3/3.2 mm
1 x Zurich Sport Sunglasse Dark Sensity MAGENTA Glasses
1 x Glases Innovation Plus
1 x Zurich Sport Sunglasse Dark Sensity BROWN Glasses
1 x Glases Nimbus "Black"
1 x Propeller MENZ-S 16x6
1 x Beech dowels 10 mm x 1000 mm
1 x 30x14 prop Super Silence
1 x 3-blades 20x12 carbon prop Super Silence
1 x Spark motor OS nº 8
1 x EME 55 cc carburetor WALBRO
1 x CNC FPV Display screen&Transmitter Holder Vertical
1 x Hose clips 6 mm
2 x DLE 111 pipe plug
1 x Fuel Fittings-Red
1 x 500 ccm complete gasoline fuel tank
1 x 1000 cc gasoline fuel tank complet
1 x T- Fittings red color (2pcs)
1 x 1000 ccm gasoline fuel tank
1 x Fuel Fittings-Blue
1 x Propeller diller for DLE30/DLE35RA/DLE40/DLE55/DLE61/EME 55/DA-5
2 x Propadapter for motor A60-V2
1 x 30/11-26 Zoll, 3-Blade Scale
2 x Blocking screws M6 gas engine
1 x Propeller diller for DA50, DLE55 red
1 x Antenna Cloverleaf 5.8 GHz Tx - Rx
2 x FIALA Propeller 23x8
1 x Propeller APC 10x7 Glow/Gas
1 x 4 mm Prop Adapter M6
2 x 6 mm Prop Adapter M8
1 x FUNRAY RR
2 x 2,3 mm Prop Adapter M6
2 x 2 mm Prop Adapter M6
1 x Propeller APC 8x4 Glow/Gas
2 x 4 mm Prop Adapter CN-Spinner
2 x Propeller FIALA 15x8 3-Blade
1 x Antenna holder bracket double
1 x VPP system propeller for AXI VPP motors (spare)
2 x 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
2 x Ring 320 mm length (5 pcs)
1 x Pad self adhesive, up to 3mm / 0.12″, (10 pcs)
2 x 26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
2 x SE Ring HACKER 300 mm (2 pcs)
1 x Carbon fiber rod 1.5 mm x 1000 mm
1 x Carbon fiber rod 1.5 mm x 1000 mm
1 x Carbon fiber flat 1000x3.0x1.0 mm
1 x Carbon fiber rod 14 mmx1000 mm
1 x Carbon fiber rod 1.5 mm x 2000 mm
1 x CYCLONE XT 6.2m ARF
1 x Fox MDM 1 6000 mm
1 x Fox MDM-1 ARF 3.5m Orange
1 x Glases Stratus
1 x XICOY X45 rail
1 x LO 100 ARC 3.3m,frame canopy
1 x Fox 4000 mm (Airwold)
1 x Grafas ARF 3.0 m (Top Model)
1 x Glases Nimbus
1 x Electric Fuel Pump 12v
1 x Sparkplug Champion RCJ-7Y for ZG
1 x Foil for sticking flaps and ailerons
1 x Smoke Oil Blue 5 l
1 x Cable servo PREMIUM MAXI 1 m (blanco/rojo/azul) PVC
1 x Cable servo PREMIUM MAXI 100m (blanco/rojo/azul) PVC
1 x Cable servo PREMIUM MAXI 50m (blanco/rojo/azul) PVC
1 x Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm
1 x Adapters for 7.5 - 35cc aircraft and naval engines
1 x SE Ring 480 mm (2 pcs)
2 x Actuador lineal HLS12-100210-7.4v
1 x Fuel station 20L incl. pump electric
1 x Bujia OS G5 gasolina
1 x Sparkplug ROSSI R8
1 x Sparkplug 1/4-32
1 x Conector JR Servo female (10 pcs)
1 x 100m servo "Premium" wire (white/red/blue)
1 x Dean "T" - Futaba Adapter
1 x 30 cm DEANS female connector
1 x 12V Car Adapter
1 x 5 line servos wire black (1 m)
1 x 200m servo "Premium" wire (white/red/blue)
1 x PIX Hawk with accesories
1 x External LED's (2 pcs)
1 x Conector JR Servo male (50 pcs)
1 x MPX-Dean "T" Adapter
1 x Charger 220/110v
1 x Adapter lead MPX/EC3
1 x Ball Bearings for motor A60-V2
1 x 2,3 mm Prop Adapter M6
1 x Prop Shaft Adapter 5 mm/M8 "long"
1 x Prop Shaft Adapter 5 mm "long"
1 x 2.3 mm Adapter for 30 mm spinners
2 x 3.17 mm Prop Adapter CN-Spinner
1 x 3.2 mm Prop Adapter M6
1 x 6 mm Prop Adapter M8
1 x 5 mm Prop Adapter M8
1 x 3,2 mm Prop Adapter M8
1 x Carbon fiber rod 2.5 mmx1000 mm
1 x SE Ring 250 mm (2 pcs)
1 x SE Ring 400 mm (2 pcs)
1 x SE Ring 330 mm (4 pcs)
1 x Carbon plate 350x150x1.5 mm
1 x Waterproof adhesive tape, width 19mm, length 25m
1 x ABS Strip 1.0x5.0x1000 mm
1 x ABS I Strip 20x10x1000 mm
1 x ABS angle 5,0x5,0x1000 mm
1 x ABS tube 12.0x10.0x1000 mm
1 x ABS angle 10,0x10,0x1000 mm
1 x AXI 2808/20 V2 Long
1 x Fuselage Bags JEEMO
1 x Fournier RF-4D
1 x 4 mm Prop Adapter M8
1 x 5 mm Prop Adapter M6
1 x Prop Shaft Adapter 4 mm/M8 "long" 35 mm
1 x 5 mm Prop Adapter CN-Spinner
1 x 4 mm Prop Adapter M8
1 x 10 mm Prop Adapter M12
1 x 3.2 mm Prop Adapter M8
1 x 3,2 mm Prop Adapter M6
1 x 3 mm Prop Adapter M6
1 x 3,2 mm Prop Adapter M6
1 x Spinner 42 mm EXTRA 330SC
1 x 5 mm Prop Adapter M8
1 x Prop Shaft Adapter 8 mm/M12 "long"
1 x Propeller APC 16x10 Glow/Gas
1 x Propeller APC 10x6 Glow/Gas
1 x Blades 330mm
1 x TARANIS X9D - plus EU/LBT FrSky complete set w. travel case incl
1 x Bearing ZZ 6x16x5 for AXI 5330/xx
1 x Marker ties (20 pcs)
1 x Cinta Goldfix 1m
1 x 20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x SE Ring 350 mm (2 pcs)
1 x 14x60 mm Mini rings Tie Wraps (4 pcs)
1 x Tape GFK 25 mm
1 x ABS Strip 1.5x4.0x1000 mm
1 x ABS "T" angle 8.0x8.0x1000 mm
1 x ABS Strip 1.5x8.0x1000 mm
1 x ABS angle 3,0x3,0x1000 mm
1 x 290 mm M4 7/8x212 mm shaft ship
1 x ABS tube 14.0x10.0x1000 mm
1 x ABS angle 4,0x4,0x1000 mm
1 x ABS "T" angle 10.0x10.0x1000 mm
1 x ABS Strip 1.0x3.0x1000 mm
1 x ABS tube 2.0x1.0x1000 mm
1 x ABS Strip 1.0x4.0x1000 mm
1 x ABS Strip 1.5x2.0x1000 mm
1 x 261 mm M4/M4 6.0x4.0 mm shaft ship
1 x FIALA Propeller 24x10
1 x FIALA Propeller 20x8
1 x FIALA Propeller 28x10
1 x FIALA Propeller 23x10
1 x FIALA Propeller 18x10
1 x FIALA 22X8 BLACK WOODEN 3-BLADE PROPELLER (GAS)
1 x FIALA Propeller 24x8
1 x FIALA Propeller 18x8
1 x FIALA Propeller 19x12 Electric
1 x FIALA 20X6 WOODEN 3-BLADE PROPELLER (GAS)
1 x FIALA Propeller 24x12
1 x PHASOR RACE 2035/4100 1D
1 x AXI 2826/8 V2 Long
1 x Digital scale up to 40 kg
1 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m
1 x Combo AM480 T-Motor 650 Kv
1 x Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm
1 x Release wax 250ml
1 x Carbon fibre tape 200 g/m² (unidirectional) 50 mm
1 x Motor Advance 30-10 F3A
1 x Electric spoiler 250 mm (2 pcs)
1 x Boomerang SPRINT V2 Yellow/Black
1 x RANGER Jet CANADA 1.854mm combo
17,346.73EUR
Manufacturers
Manufacturer Info
Robbe
Robbe Homepage
Other products
Languages
Español English
Currencies