900.01EUR

CYCLONE XT 6.2m ARF
[ROBBE2665]


CYCLONE XT 6.2m ARF

Description "Robbe Modellsport Cyclone XT 6,2M ARF mit GDRP FUSELAGE 4-piece wing with abachi planking"
The CYCLONE XT is the consistent further development of its predecessor CYCLONE. With an incredible wingspan of 6,20m, it is the giant in the electric glider sky! The epithet XT stands for "extended". The model has a painted GRP fuselage and two 2-piece wings with Abachi planking and GRP carpet pad. Its new LS 6330-15 brushless drive is rated for 8S LiPo operation for powerful climbs and easy takeoff from the launch trolley.
The outer wing design, electrical wing mating using MPX connectors in mounting frames and the new LS 6330-15 long shaft drive motor are the main features of the new Cyclone XT, along with the increased wingspan. The canopy latch has been moved to the rear under the wing/fuselage moldings as is common with large scale model gliders.
The successful HQ/W airfoil has been left in place. It runs from an HQ/W-2.5/12 at the root rib to an HQ/W-2.5/11 in the center and finishes at the winglet with an HQ/W-3/10.5. This is an excellent way to fly extended thermal flights, as this is the CYCLONE XT's profession. The flight characteristics are as usual good-natured and quiet.

Features:
- New Ro-Power Torque LS 6330-15 drive for 8S LiPo (PNP version only).
- Two-piece fuselage made of GFRP/Kevlar reinforced with CFRP
-Wings completely covered with abachi for high compressive strength
-Ready covered with ORACOVER®
-Four-part wing, separable
-Wings pluggable with MPX connectors in mounting frame for electrical connection (PNP version only)
-Solid 14x500mm round steel mating of the inner surfaces, 12x375mm carbon mating for the outer wings
-Middle wings on the upper side completely underlaid with 200g carbon fabric, underside 80g glass fabric
-Outer wings completely underlaid with 80g glass mat
-New canopy lock under wing
-High quality M3 linkage accessories Made in Germany
- Stable elevator linkage with 5/3 mm CFRP tube and M3 clevises
-Reinforced tail construction
-Continuous sandwich spar (carbon-pine-carbon) for maximum bending stiffness
-Precisely fitted anti-twist devices in all wing sections
-High degree of prefabrication

Technical data
Airfoil: HQW
Building Skill: Fortgeschritten
Control: H,S,Q,M,WK
Drive Type: Electro
Flight Skill: Profi
Flight weight approx. (g): 11400
Fuselage: Fiberglass/Carbone
Length (mm): 2250
Manufacturer: Robbe
Rec. battery: 8S/5000-7000mAh LiXX
Rec. engine: Ro-Power Torque LS 6330-15
Version: ARF - ALMOST READY TO FLY
Wing-span (mm): 6200
Wings: Styro/Glass/Abachi

Box contents
- Model CYCLONE XT largely prefabricated
- Two-piece fuselage made of GRP/Kevlar CFRP reinforced
- Abachi planked wings, GRP/CFRP reinforced
- Ready covered with ORACOVER
- Assembly instructions in German/English/French

Das Produkt Cyclone XT 6,2M ARF mit GFK Rumpf, von Robbe Modellsport in der Kategorie Electric Glider Models hat eine Spannweite von 6200 sowie ein Gewicht von 11400. Die Steuerung des Modells erfolgt über die Funktionen H,S,Q,M,WK. Das Modell ist als ARF - ALMOST READY TO FLY ausgeführt . Wir empfehlen einen 8S/5000-7000mAh LiXX Akku für dieses Elektroflugmodell.



Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Simulador RealFlight RF-9.5 S (sin emisora)
1 x Cabel PVC 2 x 0.25 mm2 (5 m) red-black
1 x Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
3 x SE Ring 450 mm (2 pcs)
2 x 30 cm BEC cable (male)
1 x Cabel charger transmitter GRAUPNER
2 x Interface Jack Adapter IKARUS
1 x Tape GFK 38 mm
1 x 3 copper lacquer wire Ø0,2 mm (1 m)
2 x Tape GFK 50 mm
2 x Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
1 x Silicone 0,14 qmm servos wire Graupner (5 m)
3 x SE Ring 250 mm (2 pcs)
1 x PVC 0,25 qmm 4 line servos wire JR/Graupner (5 m)
1 x Cabel "Y" 30 cm (graupner)
1 x 4 LiPo XH>EH adapter
1 x Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
2 x Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs)
1 x 20x200 mm battery rings
3 x SE Ring 300 mm (2 pcs)
1 x Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH
1 x White silicone 0,25 qmm wire (150 m)
2 x 20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x Cable Cargador FUTABA
1 x RF9 Flight Simulator with Spektrum Controller
1 x PVC 0,25 qmm servos wire Graupner (5 m)
1 x Interface Realflight Simulator
1 x White silicone 0,25 mm² wire (25 m)
2 x 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
2 x 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
2 x Silicone 0,50 qmm servos wire Futaba (100 m)
1 x GameCommander USB Universal
2 x Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
3 x 26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x PVC 0,08 qmm Graupner servos wire (5 m)
2 x SE Ring 400 mm (2 pcs)
2 x Foil for sticking flaps and ailerons
1 x Silicone 0,25 qmm servos wire Graupner (5 m)
2 x SIMtransmitter 6 Mode 2
1 x Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
1 x Ring 320 mm length (5 pcs)
1 x Silicone red 0,25 mm² wire (25 m)
1 x SE Ring 360 mm (2 pcs)
2 x Slave-cable USB Easy Sim
1 x Cabel "Y" 30 cm (Futaba)
1 x 2 LiPo XH>EH adapter
2 x 5 LiPo XH>EH adapter
2 x 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
1 x PVC 0,35 qmm servos wire Graupner (100 m)
1 x 14x60 mm Mini rings Tie Wraps (4 pcs)
3 x Marker ties (20 pcs)
3 x Straightened rod Ø 2.5 mm x 1000 mm
1 x Straightened rod Ø 1.5 mm x 1500 mm
2 x Straightened rod Ø 8.0 mm x 1000 mm
2 x Straightened rod Ø 7.0 mm x 1000 mm
1 x Straightened rod Ø 0.8 mm x 1000 mm
2 x Straightened threaded rod M2-1m
1 x Straightened threaded rod M3 - 1m
2 x Straightened rod Ø 6.0 mm x 1000 mm
2 x Brass rod Ø 0.8 mm x 1000 mm
1 x Straightened rod Ø 1.0 mm x 1000 mm
2 x Brass hexagonal rod Ø 3.5 mm x 1000 mm
1 x Brass rod Ø 0.5 mm x 1000 mm
1 x Para-RC Trike "RC-Bullix"
2 x Paramotor BackPack XXS 2
1 x Para-RC "RC-Evo-Cross" Rescue
1 x Parachute BACKUP X100
1 x Paramotor Trike XL
1 x Rescue 1,8m2 / BackPack
1 x Cable set PREMIUM , fuselage/wing one4one
1 x Green silicone 0,25 qmm wire (50 m)
1 x Premium servo extension 100cm
1 x 45 mm rods + T patellas set for direction control
1 x Round Rod 5,0x1000 mm
1 x EC5-Set male, simple quality, 2 x female pin, 1 x blue housing
1 x Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm
1 x 2 mm male connector (2 pcs) with safety connector
1 x Mobile Terminal
1 x 1/6 Pilot "John"
1 x Bearing 3x6x2,5
2 x PVC red battery termo-retract 68 mm (10 m)
2 x Red 3m5 mm connector holder
1 x 4,8x1000 mm 2:1 blue termoretract tube
1 x SE Ring 350 mm (2 pcs)
2 x Set fresas corte Vanadium Ø 2.3/2.35 mm (3 pcs)
2 x Welder 100W/200V
1 x PVC transparent red battery termo-retract 68 mm (10 m)
1 x PVC termo-retract battery 45 mm black transparent (1 m)
3 x Pad self adhesive, up to 3mm / 0.12″, (10 pcs)
2 x Set cables carga (Mini-JST, JST, XT60, Dean, EC3, TRX, Micro-T,
1 x Set brocas Ø 0.4-0.6-0.8-1.0 mm (4 pcs)
1 x XH male balance (3S) connector (2 pcs)
1 x EasyFLY Addon
1 x Connectors DEANS 4 pins (1 pair)
2 x NF-3m Heli Kit
1 x White silicone 0,25 qmm wire (100 m)
1 x 19 mm 2:1 black termoretract tube
2 x 3,2x1000 mm 2:1 black termoretract tube
1 x SE Ring HACKER 300 mm (2 pcs)
2 x Waterproof adhesive tape, width 19mm, length 25m
2 x SE Ring 200 mm (2 pcs)
1 x 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x 2,4x1000 mm 2:1 red termoretract tube
1 x PVC transparent battery termo-retract 85 mm (1 m)
1 x Copper lacquer wire Ø0,2 mm (5 m)
1 x Straightened rod Ø 4.5 mm x 1000 mm
1 x 22 mm Cut Disc Proxxon/Dremmel
1 x 4,8x1000 mm 2:1 red termoretract tube
1 x 2,5x60 mm allen screwdriver
1 x 1,2x1000 mm 2:1 red termoretract tube
1 x Straightened rod Ø 1.5 mm x 1000 mm
2 x 6,4x1000 mm 2:1 blue termoretract tube
1 x 1,2x1000 mm 2:1 black termoretract tube
1 x PVC 0,14 qmm servos wire Graupner (100 m)
1 x Straightened rod Ø 14.0 mm x 1000 mm
2 x SE Ring 480 mm (2 pcs)
2 x SE Ring 330 mm (4 pcs)
1 x SE Ring 240 mm (2 pcs)
2 x ENIGMA ARF
2 x BIG MOSNTER
2 x CYCLONE XT 6.2m ARF
2 x Aero-Master Cabine (Aero-naut)
3 x Avia spare blue cockpit (Top Model)
1 x ACTIVE ARF Electric 1.995 mm
1 x Gracia (Top Model)
1 x Fascination 3600 mm, Canopy (Top Model)
2 x Challenger ARF (Top Model)
1 x Astra wing Joinner (Top Model)
1 x HERON RR
1 x Aero-Master Fuselage (Aero-naut)
1 x FOX 3000 mm, Fuselage (FMS)
2 x Fascination 3600 mm, Spare Elevator (Top Model)
1 x Windsock Ozone L -1200 mm
1 x Wing OXY 0,5 pulgadas2
1 x Set cintas unión paracaídas 145 cm
1 x MAX pilot ARTF
1 x 120x60 mm SLH KOVO wheel
1 x 105 mm PVC transparent battery termo-retract 68 mm (1 m)
1 x EDGE 540-A 105" (2660 mm)
1 x Esc KOSMIK 200 HV
1 x KIRA 600-17
1 x 37 mm PVC transparent battery termo-retract (1 m)
1 x KIRA 480-31 5,2:1
1 x FAN KOSMIK
1 x 4,8x1000 mm 2:1 black termoretract tube
1 x Set Stickers Ultimatum 2.0 - Andy Folienwelt
1 x Tank ULTIMATUM 2.0 (3.2 L) PRO
1 x Electric Landing Gear GS-200 ULTIMATUM 2.0 (Elektron Retracts)
1 x T-Motor U7-V2.0 Kv420
1 x 8Wx2 Gears-Spotlight, UltraPower, 20mm White
1 x Tank ULTIMATUM 2.0 (3.2 L) + Smoke (0.9 L) PRO
1 x Sun Cover ULTIMATUM 2.0 (Hispano Aviacion)
1 x Set transmisions ULTIMATUM 2.0 (stainless/aluminium)
1 x Set brocas Ø 2.0-2.2-2.4-2.6 mm (4 pcs)
1 x Propeller POWER-PROP 13x8
1 x Propeller POWER-PROP 11x6
1 x Propeller POWER-PROP 11x8
1 x NF-3 RC set
1 x NF-2 RC set
1 x NF-3XL set
1 x NF-1 RC set
1 x Jet Afterburner Simulator NF-Jet1RY Set
1 x Jet Afterburner Simulator NF-Jet4 RY
1 x NF-3X-350 set
1 x Jet Afterburner Simulator NF-Jet3 RY
1 x NF-3X-80 liner Kit
1 x Spikes Band (5 m)
1 x 165 mm PVC transparent battery termo-retract 165 mm (10 m)
1 x KIRA 480-38
1 x Gearbox KPG25 4,2:1
1 x Grasa 2 ml
1 x Red 4 mm connector holder
2 x Set fresas corte acero-carburo Ø 0.5/1.8 mm (2 pcs)
1 x Adapter SPEED 480 whit axle short
1 x KIRA 480-38 5,2:1
2 x Cinta Goldfix 1m
1 x EXTRA NG 74" white/red/blue (Skywing RC)
2 x Steel brush wheel with 2.35mm
1 x EXTRA NG 85" 2159mm red/white
1 x SLICK 360-A 104" (2640 mm)
1 x KIRA 480-43 5,2:1
1 x Servo M2x9/16 screw (4 pcs)
1 x MPX Support (2 pcs)
1 x PVC transparent battery termo-retract 70 mm (10 m)
1 x PVC yellow-orange transparent battery termo-retract 57 mm (1 m)
1 x KIRA 400-27
1 x PVC yellow transparent battery termo-retract 68 mm (1 m)
1 x ARS 300 91" ARF 2311mm ORANGE
1 x 58 mm PVC transparent battery termo-retract 68 mm (1 m)
1 x Esc KOSMIK 160+ HV COOL
1 x SLICK 360-B 104" (2640 mm)
1 x Adapter FUN 400/480
1 x Set fresas corte acero-carburo Ø 1.8/2.3 mm (2 pcs)
1 x Set brocas Ø 1.2-1.4-1.6-1.8 mm (4 pcs)
1 x Set fresas corte Vanadium Ø 2.3/2.35 mm (3 pcs)
1 x 
1 x 135 mm PVC transparent battery termo-retract 68 mm (1 m)
1 x DRIVE 550 (KIRA 500-26 6,7:1 + KOBY 55 LV)
1 x KIRA 400-34
1 x EXTRA NG 74" yello/blue/red (Skywing RC)
1 x 165 mm PVC transparent battery termo-retract 165 mm (1 m)
1 x Adapter SPEED 480
1 x Esc KOSMIK 210 HV-I COOL
1 x PVC transparent black termo-retract battery 185 mm (1 m)
1 x BEC extension JIVE
1 x ANGEL 48" pp orange/black/white
1 x PVC termo-retract battery 45 mm transparent orange (1 m)
1 x PVC yellow battery termo-retract 69 mm (10 m)
1 x Esc KOSMIK 160 HV
2 x PVC blue transparent battery termo-retract 95 mm (1 m)
1 x 20x1000 mm Ring Strap Back To Back
1 x Gearbox KPG27/28 4,7:1pinion
1 x JIVE 120+HV Esc
1 x JIVE 80+LV Esc
1 x Propeller 8x4,3 SlowFlyer
1 x JEEMO Kit ARF Basic (2 color Carbon finish) XTRALIGHT
1 x Wings Bags JEEMO
1 x XICOY X45 rail
1 x JEEMO Kit ARF Basic (2 color) - XTRALIGHT
1 x 6,4x1000 mm 2:1 black termoretract tube
1 x Spare Part Frame Set for EACHINE RACER 250
1 x F450/550 Quadcopter, landing gear
1 x Tank Kevlar ASPIRE 6 L Kero
1 x PVC lilac battery termo-retract 70 mm (10 m)
1 x PVC yellow transparent battery termo-retract 69 mm (10 m)
1 x HAWKER HUNTER 1:5,8 (1.770mm)
1 x Set Legs + Wheels with brake ASPIRE
1 x Electric Landing Gear RS-200 w/o programmer ULTIMATUM 2.0 (Elekt
1 x 1,6x1000 mm 2:1 red termoretract tube
1 x Bags de Luxe ULTIMATUM 2.0
1 x Set brocas Ø 1.5-2.0-2.5-3.0 mm (4 pcs)
1 x ASPIRE Red ARF 2.000 mm, Fuselage
1 x ASPIRE Red ARF 2.000 mm
1 x F4E Phantom Scale 1:7
1 x F-16 Scale 1:6, Electric retract landing gear
1 x ASPIRE Red ARF 2.000 mm, Front Fuselage
1 x F-16 Scale 1:6 (1.630mm)
1 x APM2.6 Power module with 5.3V DC BEC
1 x 4Wx2 Power Navigation Light, 13mm, T-Fuse White
1 x Motor brushless 1806 - 2300 Kv Cuadracopter
1 x 12,7x1000 mm 2:1 green termoretract tube
1 x F9F COUGAR Grey ARF 1.562 mm
1 x 1,6x1000 mm 2:1 black termoretract tube
1 x Bags wings/rudder ASPIRE
1 x BOEING 727, Electric brake 28mm + controller
1 x Propeller POWER-PROP 14x10
1 x Propeller electric carbon 8.5x6
1 x Propeller POWER-PROP 10x6
1 x Brass hexagonal rod Ø 3 mm x 1000 mm
1 x Straightened rod Ø 4.0 mm x 1000 mm
1 x Parachute XTRALITE S
1 x Raer wall
1 x Suncover 100cc Red
1 x Ion Pro NG electric with flaps ORANGE (JP Model)
1 x FOX 3000 mm ARF (FMS)
1 x THERMIK DREAM 3.000 mm (Topmodel)
1 x IKURA 4.0 m
1 x Prelude ARF 2500 mm, spare wing (TopModel)
1 x Premiant II (Aero-naut)
1 x Tygon DUBRO Medium 15m
1 x Paramotor Kit Camo H1.5/ Ben Red
1 x TX Tray V1 Hand Rests only
1 x Fascination 3600 mm (Top Model)
1 x Fascination 3600 mm ARC
1 x Q-12 2000 mm Electric
1 x Avia spare fouselage CF reinforced (Top Model)
1 x Ion Pro, Wing joiner (JP Model)
53,546.63EUR
Manufacturers
Manufacturer Info
Robbe
Robbe Homepage
Other products
Languages
Español English
Currencies