Top » Catalog » Sailplanes » Electric » TM020116

330.00EUR

ENIGMA ARF
[TM020116]

Product information:
High powered thermic glider (electro glider) for sports and competition flying. Enigma is available as a glider. Kit contains parts for the electrification, including preparation for cutting the front of the fuselage.

The Enigma is one of the most beautiful combinations of classic design and modern technology. The nostalgic shape is perfectly blended with modern building techniques to create an electric sailplane that performs as well as it looks. The white gel-coated fiberglass fuselage combined with high-tech CF main spare/leading edge tube wing and carbon/balsa built up tail parts come together to make the Albatros a strong and light model. Do not be fooled by the its retro looks.

This model was designed and built to be a 21st century favorite. With its flap equipped, 3 piece wing and full flying elevator the Enigma is one of the most impressive models that we have seen in quite some time. Each part is carefully handcrafted with meticulous attention to every detail.

Virtually perfect, extremely elegant combination of classic design and modern technology.

The fuselage is reinforced with carbon.

Kit contents:
- Elegant gel-coated white fiberglass fuselage and canopy.
- Three-pieces wing with ailerons and oversized flaps.
- Removeable tail surfaces with carbon spar and leading edge.
- Rear carbon sub spar for added wing strength.
- Expertly covered with Oracover.
- Includes all necessary hardware.
- Virtually perfect, extremely clean and well made.
- Complete assembly manual with step by step illustrations.

temporarily out of stock

Reviews

Quick Find

Shopping Cart

2 x	SE Ring 250 mm (2 pcs)
1 x	SE Ring HACKER 300 mm (2 pcs)
1 x	Spikes Band (5 m)
2 x	Pad self adhesive, up to 3mm / 0.12″, (10 pcs)
2 x	SE Ring 200 mm (2 pcs)
1 x	13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
3 x	10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
2 x	14x60 mm Mini rings Tie Wraps (4 pcs)
3 x	SE Ring 350 mm (2 pcs)
2 x	SE Ring 400 mm (2 pcs)
3 x	20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
2 x	Tape GFK 25 mm
2 x	SE Ring 330 mm (4 pcs)
3 x	13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
2 x	Ring 320 mm length (5 pcs)
3 x	Tape GFK 38 mm
2 x	Tape GFK 50 mm
1 x	Propeller balancer
2 x	Field folding model stand SebArt
1 x	Propeller balancer
1 x	Medidor ángulos y/o incidencias
1 x	Truck-trailer for gliders 720 x 239 mm
1 x	Field folding model stand
1 x	Angle measurer
1 x	Surface Indicator Gauge Small
1 x	A/C quality beech plywood 600x300x0.8 mm
1 x	A/C quality beech plywood 600x300x8.0 mm
2 x	SE Ring 240 mm (2 pcs)
1 x	BALSA trip 3.0x5.0x1000 mm
1 x	Balsa panel 1.5x100x1000 mm
1 x	BALSA trip 10x10x1000 mm
1 x	BALSA trip 2.0x2.0x1000 mm
2 x	SE Ring 480 mm (2 pcs)
1 x	BALSA leading edge 8x10x1000 mm
1 x	Balsa panel 4.0x100x1000 mm
1 x	Beech dowels 2.0 x 1000 mm
1 x	A/C quality beech plywood BIRCH 600x300x1.0 mm
1 x	BALSA trip 4.0x4.0x1000 mm
3 x	Marker ties (20 pcs)
1 x	BALSA triangular 10x10x1000 mm
1 x	BALSA trip 2.0x10.0x1000 mm
1 x	A/C quality beech plywood 600x300x5.0 mm
1 x	Balsa panel 3.0x100x1000 mm
2 x	BALSA trip 3.0x3.0x1000 mm
1 x	A/C quality beech plywood 600x300x6.0 mm
1 x	SE Ring 450 mm (2 pcs)
1 x	A/C quality beech plywood 1520x750x3.0 mm
3 x	Towing hook
2 x	SERVO HOLDER
1 x	Adjustable launching hook
2 x	Tow hook for tug
2 x	Pin hinge 39x20 mm (10 uds)
2 x	Nylon hinge 15x0,3 (10 pcs)
1 x	Nylon hinge 20x20x0,3 (10 pcs)
2 x	Long pinned hinge (6 uds)
1 x	Micro flex hinge (12 uds)
1 x	Straightened rod Ø 1.5 mm x 1000 mm
2 x	48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs)
1 x	Brass rod Ø 0.8 mm x 1000 mm
2 x	Pin hinge 26x11 mm (10 uds)
1 x	Straightened rod Ø 1.5 mm x 1500 mm
1 x	18 mm reinforced hinge
1 x	Straightened rod Ø 1.2 mm x 1500 mm
1 x	Propeller APC 14x8.5 Electric Pusher
1 x	Propeller POWER-PROP 14x9
1 x	Sandwich carbon + poplar 4mm + carbon 480x290 mm
1 x	Propeller POWER-PROP 13x9
2 x	Propeller POWER-PROP 14x9 Izda
1 x	RUDDOG Protection and Heat Shield Tape (2mx50mm)
1 x	20x1000 mm Ring Strap Back To Back
1 x	20x200 mm battery rings
2 x	Cinta Goldfix 1m
2 x	SE Ring 300 mm (2 pcs)
1 x	SE Ring 360 mm (2 pcs)
2 x	Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs)
1 x	5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
2 x
1 x	Cable control set
1 x	Brass control horn M3 short for wire (2 pcs)
1 x	Threaded coupler ALU M2 Ø 3 (2 uds)
1 x	Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m
1 x	Sanyo TX Battery Eneloop 9,6 V Futaba
1 x	LS-8 GFK 6m Glider
1 x	Power Box GPS Sensor III
2 x	DELPHIN Race 3.6m c64
1 x	Fox MDM 1 4000 mm DeLuxe,Fox 1:4 set of instruments for the f
2 x	HERON RR
1 x	Flip ARF (Top Model)
1 x	ASH 31 6.08m Composite Hollow Molded
1 x	Ion Pro NG electric with flaps GREEN Fluor (JP Model)
1 x	LO 100 Scale 1:2 - Modellbau Bruckmann
2 x	FANTASY ARF 3.2m
1 x	Fox MDM-1 ARF 3.5m Orange
1 x	Fox MDM 1 4000 mm DeLuxe,Fundas deLuxe
1 x	ASH 31 Mi Scale:1/3 - 7m, elevator
1 x	Battery RX JETI LiIon RB 2600 7.2v
2 x	Fascination 3600 mm ARC
1 x	LUNAK 4,00 m
1 x	Truck-trailer for gliders 720 x 285 mm
1 x	DPSI RV Mini 5 Magic
1 x	Mini DART 2 F3K carbon light 1m Green
1 x	BALSA triangular 8x8x1000 mm
1 x	OBECHI sheet 2.0x3.0x1000 mm
1 x	Mahogany wood slat 1.5x1.5x1000 mm
1 x	Pine wood slat 2.0x10.0x1000 mm
2 x	Beech dowels 4.0 x 1000 mm
3 x	Foil for sticking flaps and ailerons
1 x	Pine wood slat 1.5x3.0x1000 mm
1 x	Liston HAYA 8 x 8 x 1000 mm
1 x	Pine wood slat 10x10x1000 mm
1 x	Beech dowels 3.0 x 1000 mm
1 x	Birch plywood plate 600x300x3.0 mm
1 x	Balsa panel 1.0x100x1000 mm
1 x	Waterproof adhesive tape, width 19mm, length 25m
1 x	Pine wood slat 3.0x5.0x1000 mm
1 x	Pine wood slat 5.0x5.0x1000 mm
1 x	Trailing edge BALSA 35x8x1000 mm
1 x	Birch plywood plate 600x300x1.2 mm
1 x	Birch plywood plate 600x300x2.5 mm
2 x	Mahogany wood slat 3.0x3.0x1000 mm
1 x	Pine wood slat 3.0x10.0x1000 mm
1 x	Linden wood slat 3.0x3.0x1000 mm
1 x	Lite Plywood panel 600x300x3.0 mm
1 x	Birch plywood plate 600x300x2.0 mm
1 x	Birch plywood plate 600x300x3.0 mm
1 x	Birch plywood plate 600x300x1.5 mm
1 x	Bungee HLG Premium
1 x	Pine wood slat 2.0x2.0x1000 mm
1 x	Gates hinge black 30x16 mm (2 pcs)
2 x	76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x	Straightened rod Ø 5.5 mm x 1000 mm
1 x	Straightened rod Ø 5.0 mm x 1000 mm
1 x	Gates hinge aluminium (1 pcs)
2 x	Flap hinge 33x9 mm (6 pcs)
1 x	Cylidric hinge 33 mm Ø 2 mm (5 pcs)
1 x	67 mm cylidric hinge Ø 5 mm (4 pcs)
1 x	Pin type hinge Al 6x98 mm (2 pcs)
2 x	Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs)
1 x	Straightened rod Ø 6.0 mm x 1000 mm
1 x	Nylon hinge 20x15x0,3 (10 pcs)
1 x	43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs)
2 x	Pin type hinge Al 3,0x50 mm demount (2 pcs)
2 x	15 mm reinforced hinge
1 x	67 mm cylidric hinge Ø 4,5 mm (5 pcs)
2 x	Pin type hinge Al 4,5x70 mm (2 pcs)
1 x	Nylon hinge for flaps/gates 27x10,5 (2 pcs)
1 x	Miniature brass strap hinge, 1 m
1 x	Gates hinge
1 x	Brass hexagonal rod Ø 3 mm x 1000 mm
1 x	Pin type hinge Al 4,5x70 mm to wire (2 pcs)
2 x	Straightened rod Ø 14.0 mm x 1000 mm
1 x	Towing hook
1 x	Oracover light Grey 2m
1 x	Sandwich carbon + poplar 3mm + carbon 480x290 mm
1 x	LOWER TOW HOOK
1 x	Extension 5 lipos JST - JST/C
1 x	30 cm BEC cable (male)
1 x	Copper lacquer wire Ø0,2 mm (5 m)
1 x	Extension 2/3 lipos JST - JST/C
1 x	PSC 5
1 x	Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
1 x	Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
1 x	Female connector for 6 pines AWG
1 x	Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x	"Y" charging 4mm wire (2 IN-1 OUT).
1 x	Female prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm
1 x	Servo Robbe FS 128 BB MG HV Digital
1 x	Tube support Ø 6mm (10 pcs)
1 x	Epoxy adhesivo Elan-tech ADH 981.892 50ml (dark grey)
1 x	Oracover GREY Seafire Sea 2m
1 x	Prop Holder AXI 41xx V2
1 x	Extension MPX-MPX 20 cm
2 x	Ion Pro NG electric with flaps RED Fluor (JP Model)
1 x	PowerBox SOURCE
1 x	THERMIK XXXL 4,9m D-Box Electric
1 x	Safetyclip MPX (6 pcs)
1 x	FOX 3000 mm ARF (FMS)
1 x	Aero-Master Wings (Aero-naut)
1 x	Challenger ARF (Top Model)
1 x	Avia (Top Model)
1 x	BIG MOSNTER
1 x	Propeller 12x6 Falcon electric
1 x	19.5x13 Falcon electric 3-Blade carbon prop (54 g)
1 x	PowerBox PowerExpander SRS
1 x	USB Interface Adapter
2 x	LENTUS Multiplex Landig gear retract
1 x	Sanyo TX Battery Eneloop 9,6 V 2500 mAh
2 x	Ion Pro, Elevator (JP Model)
1 x	PowerBUS Lead 30 cm
1 x	PowerBox Evo
1 x	PowerBox DigiSwitch V2 JR/JR
1 x	Premiant II (Aero-naut)
1 x	PowerBox iGyro SRS + GPS Modul
1 x	Poerfly
1 x	Ion Pro NG electric with flaps ORANGE (JP Model)
1 x	LENTUS Multiplex Propeller 8x6
1 x	PowerBox VRegulador 6.0v
1 x	Ka 8 B (Top Model)
1 x	SPARK Switch 5.9v
1 x	Albatros ,spare cockpit (Top Model)
1 x	Aero-Master Fuselage (Aero-naut)
1 x	Astra (Top Model)
1 x	FANTASY ARF 3.0m, Fundas alas
1 x	Albatros ,spare fuselage (Top Model)
1 x	FOX 2.300 mm V2 PNP (FMS)
1 x	Fascination 3600 mm, Spare Wings (Top Model)

30,642.66EUR