Inicio » Catálogo » Veleros » Eléctricos » ROBBE2665

900.01EUR

CYCLONE XT 6.2m ARF
[ROBBE2665]

CYCLONE XT 6.2m ARF

Description "Robbe Modellsport Cyclone XT 6,2M ARF mit GDRP FUSELAGE 4-piece wing with abachi planking"
The CYCLONE XT is the consistent further development of its predecessor CYCLONE. With an incredible wingspan of 6,20m, it is the giant in the electric glider sky! The epithet XT stands for "extended". The model has a painted GRP fuselage and two 2-piece wings with Abachi planking and GRP carpet pad. Its new LS 6330-15 brushless drive is rated for 8S LiPo operation for powerful climbs and easy takeoff from the launch trolley.
The outer wing design, electrical wing mating using MPX connectors in mounting frames and the new LS 6330-15 long shaft drive motor are the main features of the new Cyclone XT, along with the increased wingspan. The canopy latch has been moved to the rear under the wing/fuselage moldings as is common with large scale model gliders.
The successful HQ/W airfoil has been left in place. It runs from an HQ/W-2.5/12 at the root rib to an HQ/W-2.5/11 in the center and finishes at the winglet with an HQ/W-3/10.5. This is an excellent way to fly extended thermal flights, as this is the CYCLONE XT's profession. The flight characteristics are as usual good-natured and quiet.

Features:
- New Ro-Power Torque LS 6330-15 drive for 8S LiPo (PNP version only).
- Two-piece fuselage made of GFRP/Kevlar reinforced with CFRP
-Wings completely covered with abachi for high compressive strength
-Ready covered with ORACOVER®
-Four-part wing, separable
-Wings pluggable with MPX connectors in mounting frame for electrical connection (PNP version only)
-Solid 14x500mm round steel mating of the inner surfaces, 12x375mm carbon mating for the outer wings
-Middle wings on the upper side completely underlaid with 200g carbon fabric, underside 80g glass fabric
-Outer wings completely underlaid with 80g glass mat
-New canopy lock under wing
-High quality M3 linkage accessories Made in Germany
- Stable elevator linkage with 5/3 mm CFRP tube and M3 clevises
-Reinforced tail construction
-Continuous sandwich spar (carbon-pine-carbon) for maximum bending stiffness
-Precisely fitted anti-twist devices in all wing sections
-High degree of prefabrication

Technical data
Airfoil: HQW
Building Skill: Fortgeschritten
Control: H,S,Q,M,WK
Drive Type: Electro
Flight Skill: Profi
Flight weight approx. (g): 11400
Fuselage: Fiberglass/Carbone
Length (mm): 2250
Manufacturer: Robbe
Rec. battery: 8S/5000-7000mAh LiXX
Rec. engine: Ro-Power Torque LS 6330-15
Version: ARF - ALMOST READY TO FLY
Wing-span (mm): 6200
Wings: Styro/Glass/Abachi

Box contents
- Model CYCLONE XT largely prefabricated
- Two-piece fuselage made of GRP/Kevlar CFRP reinforced
- Abachi planked wings, GRP/CFRP reinforced
- Ready covered with ORACOVER
- Assembly instructions in German/English/French

Das Produkt Cyclone XT 6,2M ARF mit GFK Rumpf, von Robbe Modellsport in der Kategorie Electric Glider Models hat eine Spannweite von 6200 sowie ein Gewicht von 11400. Die Steuerung des Modells erfolgt über die Funktionen H,S,Q,M,WK. Das Modell ist als ARF - ALMOST READY TO FLY ausgeführt . Wir empfehlen einen 8S/5000-7000mAh LiXX Akku für dieses Elektroflugmodell.

Bajo pedido

Comentarios

Búsqueda Rápida

Cesta de Compras

1 x	Camara 800 TVL CMOS para FPV
2 x	Camara USB micro endoscopica
2 x	Cámara Sony 4140+673 CCD Board con emisor 5,8 GHz 200mw + antena
1 x	Vela OXY 5.0 m2
1 x	Ballast 700gr OPALE
1 x	Piloto MAX ARTF
1 x	Para-RC Trike "RC-Bullix"
1 x	Paramotor BackPack XXS 2
1 x	Paracaídas de seguridad 1,8 m2
1 x	Vela OXY 0,5 pulgadas2
1 x	Mochila OPALE paramodels
1 x	Aramid 50 daN 50 m
1 x	Piloto LUCAS ARTF
1 x	Paramotor Trike XL
1 x	Paracaídas PV6 para F3J
1 x	Paracaidas rescate "RC-Evo-Cross"
2 x	Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds)
2 x	Acople ALU M2,5 Ø 3 (2 uds)
1 x	Clevis plastico I=30 mm / hole 2.5mm / pin 1 (2 pcs)
2 x	Acoplador M3 (10 uds)
2 x	Ball link aluminio M3 V1 azul (10 pcs)
2 x	Ball Link ALU M3 - RH (1 pcs)
1 x	Acoplador Micro M2 Ø 0,8 mm (10 pcs)
2 x	Acoplador Micro M2 Ø 1 mm (10 pcs)
1 x	Acoplador para cable M4 (10 pcs)
1 x	Acoplador "Z" Ø 1.8 (2 uds)
2 x	Ball link ALU M3/2 con rodamiento (1 pcs)
2 x	Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds)
1 x	Acoplador M2,5 Ø 3 mm (10 pcs)
2 x	Ball link ALU M2/2 con rodamiento (1 pcs)
1 x	Ball link V1 Ø7 M4/3 (6 uds)
2 x	Chaleco Hispano Aviación
1 x	Clevis con trasmisión M3
1 x	Acople ALU M2 Ø 4 (2 uds)
2 x	Polo Hispano Aviación
2 x	Acoplador "Z" Ø 2 (2 uds)
1 x	Kwik link AL M3 L:23 mm (2 pcs) + Pin Ø 1,6 mm
2 x	Ball link aluminio M3 V1 (10 pcs)
1 x	Acoplador M2 (10 uds)
1 x	Portaequipajes BIG-MALIBU XL 285x90x44 cm Gris
1 x	Motor DLE 200cc Premium Muffler
2 x	Sensor digital Air Speed con Pitot
1 x	Tubo ABS 3,0x2,0x1000 mm
1 x	Tubo ABS 6,0x4,0x1000 mm
1 x	Tubo ABS 2,0x1,0x1000 mm
2 x	Set de tubos de carbono (Ø38 mm y Ø14 mm)
1 x	Tubo ABS 4,0x2,0x1000 mm
1 x	Tubo carbono (L 1000 mm, Ø1.5 mm, Ø0.7 mm)
1 x	Tubo ABS 4,0x3,0x1000 mm
1 x	Tubo acero inox. Dia, 28 mm x 0.6 x 1000 mm
1 x	Tubo acero (L 1000 mm, Ø4 mm, Ø3,7 mm)
1 x	Tubo aluminio (L 1000 mm, Ø7,0 mm, Ø6,1 mm)
1 x	Tubo aluminio (L 1000 mm, Ø4,0 mm, Ø3,1 mm)
1 x	Tubo ABS 3,0x2,0x330 mm
2 x	Tubo ABS 5,0x4,0x1000 mm
2 x	Tubo ABS 7,0x5,0x1000 mm
1 x	Tubo acero (L 1000 mm, Ø8 mm, Ø7,7 mm)
1 x	Tubo aluminio (L 1000 mm, Ø5,0 mm, Ø4,1 mm)
1 x	Tubo ABS 14,0x10,0x1000 mm
1 x	Tubo acero (L 1000 mm, Ø5 mm, Ø4,7 mm)
2 x	Tubo ABS 8,0x6,0x1000 mm
1 x	Tubo ABS 20,0x18,0x1000 mm
3 x	Tubo acero (L 1000 mm, Ø3 mm, Ø2,7 mm)
1 x	Tubo ABS 8,0x7,0x1000 mm
1 x	Tubo ABS 16,0x14,0x1000 mm
2 x	Tubo acero (L 1000 mm, Ø7 mm, Ø6,7 mm)
1 x	Tubo carbono (L 1000 mm, Ø0,7 mm, Ø0,3 mm)
2 x	Tubo acero (L 1000 mm, Ø6 mm, Ø5,7 mm)
1 x	Tubo ABS 9,0x8,0x1000 mm
1 x	Tubo acero (L 1000 mm, Ø9 mm, Ø8,7 mm)
1 x	Anemometro Xplorer3
1 x	Prisionero aluminio 6 mm Ø (4 uds)
1 x	Salida para cables 28x5 mm (2 pcs)
1 x	Plancha contrachapado "Economy" 600x300x6,0 mm
1 x	Liston de BALSA Borde ataque 8 x 10 x 1000 mm
1 x	Prisionero allen M4x6
1 x	Cierre cabina
1 x	Cierre cabina aluminio Ø5, I=16 mm
1 x	Anemometro Xplorer2
1 x	Soporte abrazaderas 4.3 (4 uds)
1 x	Plancha de balsa 3,0x100x1000 mm
1 x	Prisionero allen M4x4
1 x	Prisionero aluminio 5 mm Ø (4 uds)
2 x	Plancha contrachapado Abedul 600x300x0,6 mm
1 x	Prisionero aluminio 2.5 mm Ø (4 uds)
1 x	Listón de HAYA redondo 2,0 x 1000 mm
2 x	Listón de BALSA 5,0x5,0x1000 mm
1 x	Listón de BALSA 3,0x5,0x1000 mm
1 x	Conjunto bieleta 80 mm para dirección
1 x	Listón triangular de BALSA 15x15x1000 mm
1 x	Salida para cables 41x5,5 mm (2 pcs)
1 x	Plancha de balsa 2,5x100x1000 mm
1 x	Conjunto bieleta 100 mm y rótulas T. para dirección
1 x	Prisionero aluminio 4 mm Ø (4 uds)
1 x	Pasacable de goma Ø 6.4 mm (4 uds)
1 x	Plancha de balsa 4,0x100x1000 mm
1 x	Prisionero allen M3x5
1 x	Prisionero aluminio 3 mm Ø (4 uds)
1 x	Prisionero aluminio 2 mm Ø (4 uds)
1 x	Plancha contrachapado Abedul 600x300x8,0 mm
1 x	Plancha contrachapado ABEDUL 600x300x1,0 mm
1 x	Plancha contrachapado Abedul 1520x750x4,0 mm
1 x	Plancha contrachapado Abedul 600x300x5,0 mm
1 x	Cierre cabina tipo FOX MDM1 4m (1 par)
1 x	Listón triangular de BALSA 10x10x1000 mm
1 x	Oracover Rojo Ferrari (2 m)
1 x	Conector ABS "CRUZ" 4.0 mm x 1000 mm
1 x	Conector banana oro 4 mm
1 x	Arandela 4.3 mm (20 pcs)
1 x	Paramotor BackPack XXS (sin accesorios)
2 x	Polea de bronce 16/2 (2 pcs)
1 x	Kwik link AL M4 L:40 mm (2 pcs) + Pin Ø 2,5 mm
1 x	Kwik link AL M3 L:40 mm (2 pcs) + Pin Ø 2,5 mm
1 x	Kwik link metálico con bola M3 (10 uds)
1 x	Polea de bronce 14/2 (2 pcs)
1 x	Terminales riostras M3 (10 uds)
1 x	Polea de bronce 12/2 (2 pcs)
1 x	Suncover 100cc Red
1 x	Kwik link AL M4 con Clip (2 pcs)
1 x	Varilla mando roscada M2,5 (2 uds)
1 x	Crimping sleeves para cables de 1.1 mm (10 pcs)
2 x	Sun Cover BULL Mo1 2.6 (Hispano Aviacion)
1 x	Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 1,6 mm
1 x	Terminales riostras M2 (10 uds)
2 x	Polea de bronce 4/1,5 (2 pcs)
1 x	Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs)
1 x	Ball link aluminio M3 V1 rojo (10 pcs)
3 x	Polea de bronce 2,5/1 (2 pcs)
1 x	Terminales riostras M3x16 (2 uds)
1 x	Acople ALU M3 Ø 5 (2 uds)
1 x	Varilla mando doble roscada duraluminio M3 60 mm (2 pcs)
1 x	Plancha de balsa 1,0x100x1000 mm
1 x	Varilla mando doble roscada aluminio M3 90 mm (2 pcs)
1 x	Borde Salida BALSA 35x8x1000 mm
1 x	Cable acero trenzado Ø 0.88 mm - 60 kp (10 m)
1 x	Listón de PINO 2,0x10,0x1000 mm
1 x	Casquillo para grimpar cable de 1,3 mm (10 pcs)
1 x	Motor DLE 170 M - Paramotores
1 x	Helice FALCON 32,5x11 PUSHER Carbono
2 x	Motor DLE 430 cc - Paramotores
1 x	Acople ALU M2,5 Ø 4 (2 uds)
1 x	Corona grade autoarranque DLE-170M
1 x	Tubo de latón (L 1000 mm, Ø11,0 mm, Ø10,0 mm)
1 x	Tubo ABS 10,0x8,0x1000 mm
1 x	Tubo carbono (L 1000 mm, Ø2 mm, Ø1 mm)
1 x	Tubo carbono (L 1000 mm, Ø18 mm, Ø15 mm)
1 x	Tubo carbono 3K-PW (Ø14 mm, Ø12 mm L:2000 mm)
2 x	Modulo PPM Encoder
1 x	Tubo acero (L 1000 mm, Ø12 mm, Ø11,7 mm)
1 x	JetiBOX
1 x	Tubo carbono conico 3K 10x5x0.3 x 880mm
1 x	Kontronik ProgUnit
1 x	Tubo carbono 3K-PW (Ø20 mm, Ø18 mm L:2000 mm)
1 x	Hacker X-Pro USB interface V2
1 x	Tubo de latón (L 1000 mm, Ø14,0 mm, Ø12,0 mm)
1 x	Tubo de latón (L 1000 mm, Ø10,0 mm, Ø9,1 mm)
1 x	Tubo carbono (L 1000 mm, Ø14 mm, Ø12 mm)
1 x	Tubo ABS 3,0x1,0x1000 mm
1 x	Tubo de latón (L 1000 mm, Ø8,0 mm, Ø7,1 mm
1 x	Tubo carbono (L 1000 mm, Ø16 mm, Ø14 mm)
2 x	Tubo Pitot para PIXHAWK
1 x	Tubo carbono (L 1000 mm, Ø16 mm, Ø12 mm)
1 x	Tubo ABS 5,0x4,0x156 mm
1 x	Tubo carbono 3K-PW (Ø30 mm, Ø27 mm L:1000 mm)
1 x	Tubo aluminio (L 1000 mm, Ø3,0 mm, Ø2,1 mm)
1 x	Tubo carbono/kevlar 3K-PW (Ø25 mm, Ø22.5 mm L:1500 mm)
1 x	Transmision funda/varilla octog. plastica 3/2
1 x	Listón de PINO 2,0x2,0x1000 mm
1 x	Liston HAYA 8 x 8 x 1000 mm
1 x	Varilla mando roscada M2,0 (2 uds) 250 mm
1 x	Varilla mando doble roscada aluminio M3 80 mm (2 pcs)
1 x	Listón de PINO 10x10x1000 mm
1 x	Cable acero trenzado Ø 0,5 mm (20 m)
1 x	Listón de BALSA 4,0x4,0x1000 mm
1 x	Listón triangular de BALSA 8x8x1000 mm
1 x	Varilla mando doble roscada aluminio M2,5 40 mm (2 pcs)
1 x	Listón de PINO 3,0x7,0x1000 mm
1 x	Brazo direccional 16 mm Ø 4 mm ( 2 uds)
1 x	Anclaje varilla mando Ø 1.5 mm prisionero/arandela (2 uds)
1 x	Carga cohete D3-P
1 x	Plano IKARUS
1 x	METEOR 1.000 mm kit
1 x	Hélice Plegable CAM PROP 10x6 + Cono completo
1 x	Motor XPower XC 3522/5 LS
1 x	Tubo carton cohete 50mm x 48mm x 250mm
1 x	Porta Kwik link M3 3 mm (2 pcs)
1 x	Kwik link con brazo M5xM2,5xL30
1 x	Cargador iCharger 4010 Duo
1 x	Pîn 3,0 terminales riostras M3,0 ⌀ (6 pcs)
1 x	Porta kwiw link M2 (10 pcs)
1 x	Tensor de riostras M1,6x17/27 (2pcs)
1 x	KIRA 400-39 5,2:1
1 x	KIRA 480-43
1 x	Adaptador SPEED 480 con eje corto
1 x	PROFI Box JETI
1 x	Brazos para emisora Jeti DC/DS
1 x	Stick DUPLEX con interruptor 2 posiciones para DC/DS
1 x	DUPLEX 2.4EX MT 300 EX
1 x	DUPLEX 2.4EX Central Box 220
1 x	Albatros, cabina (Top Model)
1 x	Velero Mü13e (Bergfalke)
1 x	X-RAY Micro QR (Dirección)
1 x	EASYGLIDER 4 RR
1 x	Astra Bayoneta (Top Model)
1 x	Fournier RF-4D
1 x	Chili Race F3K (carbon biax)
1 x	TAKEO 3.6m electric
1 x	Avia, fuselaje reforzado en fibra de carbono(Top Model)
1 x	Planeador IKARUS
1 x	Tubo de latón (L 1000 mm, Ø2,0 mm, Ø1,2 mm)
1 x	Plancha contrachapado HAYA 600 x 300 x 2,0 mm
1 x	Tensor de riostras M2x22/35 (2pcs)
1 x	KIRA 480-34
1 x	KIRA 400-34
1 x	Motor DLE 200cc Std
1 x	DUPLEX 2.4EX MSpeed PITOT <300 Km/h
1 x	Espuma caja DC24 II
1 x	Emisora JETI Duplex DC-16 II BLACK Multimode
1 x	DUPLEX 2.4EX MUI 75
1 x	VAGABOND 1500 mm ARF V2 (Rojo)
1 x	BIG MONSTER
1 x	Albatros, fuselaje (Top Model)
1 x	HERON RR
1 x	FOX ARF 2000 mm Rojo (Hacker Model)
1 x	Aero-Master Alas (Aero-naut)
1 x	FOX 2.300 mm V2 PNP (FMS)
2 x	X-RAY Micro QR
1 x	Chili Race F3K (aramid nose)
1 x	DELPHIN Race 3.6m c64
1 x	ALBATROS 3.0 m (naranja/blanco)
1 x	ASG 32 560 mm
1 x	Velero Ka 7 Red (2540mm)
1 x	CYCLONE XT 6.2m ARF
1 x	Planeador KNIRPS
1 x	Aero-Master Fuselage (Aero-naut)
1 x	THERMIK XL 4000 mm
1 x	Avia (Top Model)

38,919.36EUR