Top » Catalog » Sailplanes » Large Scale » TM02043

780.00EUR

Ventus 2cx 4.5 m
[TM02043]

The maquette of the well known glider in scale 1: 4th.

VENTUS 2cx is supplied in ARF verzion, its Coated with foil Oracover®.

The model has an operated ailerons (using 2 servos), flaps (4 servos), air brakes (2 servos) elevator (1 servo), rudder (1 servo).

This model is completly made in the Czech Republic. The spare parts are in stock.

Stadard verzion:
Case for the wing joiner is glued inside the fuselage. The rudder is attached to the fuselage with a control horn and bowden. The servocabel is also glued to the elevator. The wing has mounted the airbrakes.

The kit contens:
- Fiberglass, white colored fuselage
- The wing : the center of the wing is made of polystyrene, coated with a veneer, reinforced with glass fiber and carbon flange. The construction is supplemented by beams which are connecting the top and bottom of the cover. The enclosure for mounting winglets and the brake shields are also installed. The wing is coated by Oracover® foil.
- White through-colored fiberglass elevator
- White through-colored fiberglass rudder
- White through-colored fiberglass wing tip
- Iron wing joiner
- Fiberglass frame of the cabin
- Transparent cabin
- Step by step building instructions
- Small accessiries
- High quality vinyl stickers set

Controls:
- Ailerons and flaps (6 micro servos)
- Elevator – (1 micro servo)
- Rudder – (1 servo standard)
- Airbrakes – (2 micro servos)

under request

Reviews

Quick Find

Shopping Cart

1 x	Extractor piñones 2.3/3.2 mm
1 x	Civilian pilot "Joe" size 9cm (Slimline)
1 x	Motor A2212/13T
1 x	1/4 Pilot "Mike"
1 x	Militarian pilot "Fly Boy" size 9cm (Slimline)
1 x	Pilot "Goose" (Slimline)
1 x	1/12 Pilot "Tom"
1 x	Civilian pilot "Pamela" size 9cm (Slimline)
1 x	1/6 Pilot "Cindy"
1 x	Pilot "Adolf" Legends Series (Slimline)
2 x	Civilian pilot "G-Man" size 9cm (Slimline)
2 x	Pilot "Dick" Legends Series (Slimline)
1 x	Piloto jet 130 mm
1 x	1/4 Pilot "Heidi"
1 x	Piloto RC Civil 1/5- 1/6 Scale 12"
1 x	1/7 Pilot "Japanese"
1 x	Civilian pilot "Curt" size 9cm (Slimline)
3 x	2000A 12V Lithium Jump Starter with 150PSI Air inflator
2 x	Piloto JET 1:3,5
2 x	1/12 Pilot "Fighter"
3 x	1/12 Pilot "Cougar"
1 x	Pilot "Anthony" (Slimline)
3 x	Servo NARO Max Std
2 x
1 x	Tape GFK 25 mm
1 x	SE Ring 360 mm (2 pcs)
1 x	Tape GFK 50 mm
1 x	Paramotor BackPack XXS (without accessories)
1 x	26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs)
1 x	20x200 mm battery rings
1 x	Ring 320 mm length (5 pcs)
1 x	14x60 mm Mini rings Tie Wraps (4 pcs)
2 x	5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	Foil for sticking flaps and ailerons
1 x	20x1000 mm Ring Strap Back To Back
1 x	Paramotor Trike XL
1 x	Paramotor Kit Camo H1.5/ Ben Red
1 x	10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
2 x	SE Ring 400 mm (2 pcs)
1 x	Paramotor BackPack XXS 2
2 x	20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
2 x	Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
1 x	Para-RC "RC-Evo-Cross" Rescue
1 x	SE Ring 300 mm (2 pcs)
1 x	Windsock Ozone L - 700 mm
2 x	Marker ties (20 pcs)
1 x	Cinta Goldfix 1m
1 x	Set cintas unión paracaídas 145 cm
2 x	SE Ring 330 mm (4 pcs)
1 x	SE Ring 240 mm (2 pcs)
1 x	Rescue 1,8m2 / BackPack
2 x	SE Ring 200 mm (2 pcs)
1 x	Windsock Ozone L -1200 mm
1 x	Wing OXY 0,5 pulgadas2
3 x	Parachute BACKUP X100
2 x	Opale Rucksack
1 x	MAX pilot ARTF
2 x	SE Ring 480 mm (2 pcs)
1 x	Ferrita 14x8x5.5 mm
2 x	PPM Encoder Module
1 x	Optical RPM Sensor
1 x	Ferrita 17x10x6.5 mm
1 x	DYNAMOMETER S-1580
2 x	Beech dowels 10 mm x 1000 mm
2 x	BALSA triangular 15x15x1000 mm
1 x	GameCommander USB Universal
1 x	SIMtransmitter 6 Mode 2
1 x	Fibra de vidrio 80 g/m² (2 m x 100 cm)
1 x	Red copper lacquer wire Ø0,2 mm (5 m)
1 x	Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
1 x	USB HLS prog. interface
1 x	TrainerCord (master-learner)
2 x	Support Filtro FESTO
3 x	Pilot WWII US Navy Pacific 12" Scale 1/6-1/5
2 x	Aro pasacable Ø25 mm (4 pcs)
1 x	Support pump Xicoy X45
1 x	Soporte filtro FESTO (4 pcs)
2 x	Ballast 700gr OPALE
2 x	LUCAS pilot ARTF
1 x	BATTWIN BATTERY REDUNDANCY SYSTEM
2 x	Threaded coupler ALU M2,5 Ø 4 (2 uds)
1 x	Adapter 3,2 mm M6 for spinner 40 mm fixed propeller
1 x	Threaded coupler ALU M2 Ø 3 (2 uds)
1 x	Threaded coupler M2 (10 uds)
1 x	Adapter 3,2 mm M6
1 x	Threaded coupler ALU M3 Ø 6 (2 uds)
2 x	Piloto Jet "Red" 1/6 Scale
1 x	Adapter 4,0 mm M6
1 x	2 mm Prop Adapter M5
2 x	Threaded coupler ALU M2 Ø 4 (2 uds)
1 x	Adapter 4,0 mm M8
1 x	Piloto Jet "Green" 1/6 Scale
2 x	A/C quality beech plywood 1520x750x3.0 mm
2 x	Birch plywood plate 600x300x1.5 mm
1 x	Birch plywood plate 600x300x2.0 mm
1 x	Lite Plywood panel 600x300x2.0 mm
2 x	Birch plywood plate 600x300x4.0 mm
1 x	quality beech plywood BIRCH 600x300x2.0 mm
2 x	A/C economy plywood 600x300x6+.0 mm
2 x	Plywood sheet BEECH 600 x 300 x 2,0 mm
1 x	Wing OXY 5,0 m2
1 x	Compact on-board starting system (9525)
1 x	DLE 30 complete electronic ignition
1 x	Starter EM Gear Power 250
2 x	Sparkplug Champion RCJ-7Y for ZG
1 x	Sparkplug 1/4-32 EVO 10GX
1 x	Compact on-board starting system (9713)
2 x	GLOW 5C + accesories
1 x	LightBox SR
1 x	DLE 111 pipe plug
1 x	Sparkplug ROSSI R8
1 x	Spark motor OS Type F
2 x	Kwik link AL M3 L:23 mm (2 pcs) + Pin Ø 1,6 mm
2 x	Ball link duraluminium M3 V1 (10 pcs)
1 x	Aluminium coupler M2,5/2 with ball bearing (1 pcs)
1 x	Couple M4 for wire (10 pcs)
2 x	A/C quality beech plywood 600x300x5.0 mm
2 x	Birch plywood plate 600x300x2.0 mm
2 x	A/C quality beech plywood 600x300x6.0 mm
1 x	Birch plywood plate 600x300x1.2 mm
1 x	Fixed launching hook
2 x	BALSA triangular 6x6x1000 mm
2 x	A/C quality beech plywood 600x300x0.8 mm
2 x	Brake controller for 28 and 36 mm Brakes
1 x	SAGITA Alsema 4.0 m
1 x	SHK 4000 mm Scale 1:4.25, V-Tails
1 x	HAWK 100 ARF scale 1:4.75 2480 mm - PAINTED AH106
1 x	Ventus 2cx 4.5 m de Luxe
1 x	BETA 1400 RTF Red
1 x	Tape GFK 38 mm
1 x	13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	Hovercraft sailcloth
2 x	Clevis plastico I=30 mm / hole 2.5mm / pin 1 (2 pcs)
1 x	Threaded coupler M2,5 Ø 2 mm (10 pcs)
1 x	Propeller POWER-PROP 7x7
1 x	Angle support XT60 conector
1 x	Support conector MPX (6 pcs)
1 x	Soporte grifo FESTO vertical (1 pcs)
1 x	Support Pitot JETI
2 x	1/6 Pilot "Tony"
1 x	1/10 Pilot "Jack"
1 x	1/10 Pilot "Jimmy"
1 x	RV-8 ARF 70cc rojo/blanco/azul
1 x	Nylon gear block Ø 4 mm (2 uds)
1 x	SOLOFOX 5m Voll-GfK
1 x	Landing gear strap medium (4 uds)
1 x	FALCON 20X9 CARBON PROPELLER (GAS)
1 x	M3/5Diam metal ball link V3 (2 pcs)
1 x	KIRA 480-31 5,2:1
1 x	SIG Coverall 1.2x4.5 m
2 x	BALSA trip 3.0x3.0x1000 mm
1 x	BALSA trip 2.0x10.0x1000 mm
1 x	Swift S1 De-luxe 3.730 mm
1 x	Spark motor OS nº 3
1 x	Ventus 2cx 4.5 m Winglets
1 x	Swift S1 De-luxe 3.140 mm
1 x	50 mm aluminium spinner (Kavan)
1 x	Ciano KAVAN Super Thin 20g
1 x	55 mm aluminium spinner (Kavan)
1 x	Cable coupler M3 (10 uds)
2 x	Mahogany wood slat 3.0x3.0x1000 mm
1 x	Beech dowels 4.0 x 1000 mm
1 x	BOEING 727, Jet pipe for Boeing 727
1 x	Balsa panel 1.0x100x1000 mm
1 x	BOEING 727 kit
1 x	Balsa panel 6.0x100x1000 mm
1 x	BOEING 727, Electric brake 28mm + controller
1 x	Balsa panel 3.0x100x1000 mm
1 x	A/C quality beech plywood 600x300x0.8 mm
1 x	Lightweight aircraft wheel, 45x18.5x2
1 x	Lightweight aircraft wheel, 55x18.5x3
1 x	EWC6 40 cm wing connector
1 x	DPSI V-Match
1 x	DPSI RV Mini 6 Magic with Gas-Cap switch
1 x	Emcotec SPS Magnetic Switch Actuator
1 x	Combo lighting module with covering drop shape
1 x	Battery EMCOTEC LiIon 3000 7.2v
1 x	Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 1,6 mm
1 x	Fully Threaded Steel Rod alumin 40 mm M3 (2 pcs)
1 x	Fully Threaded Steel Rod alumin 60 mm M3 (2 pcs)
1 x	Fully Threaded Steel Rod alumin 70 mm M3 (2 pcs)
1 x	Nylon gear block Ø 5 mm (2 uds)
1 x	Air pressure gauge
1 x	Nylon threaded block M4 (2 uds)
1 x	Gearbox KPG27/28 4,7:1pinion
1 x	Liston HAYA 10 x 10 x 1000 mm
2 x	Pine wood slat 10x10x1000 mm
1 x	SE Ring 250 mm (2 pcs)
1 x	Ignition bed V2 Red color
1 x	Encendido CDI RCAME 1/4*32 Single 120º
1 x	Sparkplug 1/4-32
1 x	Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs)
1 x	Aluminium coupler M2/2 with ball bearing (1 pcs)
1 x	Threaded coupler ALU M2,5 Ø 6 (2 uds)
1 x	Aluminium red ball links M3 V1 (10 pcs)
1 x	Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds)
1 x	Ball link V1 Ø7 M4/3 (6 uds)
1 x	Threaded coupler M3 (10 uds)
1 x	Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds)
1 x	Angled clevis with threaded rod M3
1 x	Crimping sleeves for 1.1 mm cable (10 pcs)
1 x	Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs)
1 x	Pine wood slat 6.0x6.0x1000 mm
1 x	Pine wood slat 5.0x5.0x1000 mm
1 x	Pine wood slat 2.0x2.0x1000 mm
1 x	Pine wood slat 1.5x3.0x1000 mm
1 x	Liston HAYA 8 x 8 x 1000 mm
1 x	Pine wood slat 2.0x10.0x1000 mm
1 x	Pine wood slat 3.0x5.0x1000 mm
1 x	OBECHI sheet 2.0x3.0x1000 mm
1 x	Trailing edge BALSA 35x8x1000 mm
1 x	Walnut wood slat 1.5x1.5x1000 mm
1 x	BALSA trip 6.0x6.0x1000 mm
1 x	Pine wood slat 3.0x10.0x1000 mm
1 x	BALSA triangular 10x10x1000 mm
1 x	BALSA trip 8.0x8.0x1000 mm
1 x	BALSA trip 4.0x4.0x1000 mm
1 x	Mahogany wood slat 2.0x2.0x1000 mm
1 x	BALSA trip 2.0x2.0x1000 mm
1 x	A/C quality beech plywood 600x300x8.0 mm
1 x	BOEING 727, Retract set for Boeing 727
1 x	Balsa panel 5.0x100x1000 mm
1 x	Balsa panel 2.5x100x1000 mm
1 x	DPSI magnetic switch actuator (housing)
1 x	A/C quality beech plywood 600x300x0.6 mm
1 x	Balsa panel 8.0x100x1000 mm
1 x	Balsa panel 4.0x100x1000 mm
1 x	Lite Plywood panel 600x300x3.0 mm
1 x	A/C quality beech plywood 600x300x1.5 mm
1 x	A/C quality beech plywood 600x300x5.0 mm
1 x	DPSI OCP Overload protection
1 x	Balsa panel 2.0x100x1000 mm
1 x	A/C quality beech plywood 1520x750x4.0 mm
1 x	Birch plywood plate 600x300x2.5 mm
1 x	A/C quality beech plywood 600x300x6.0 mm
1 x	Birch plywood plate 600x300x3.0 mm
1 x	BALSA triangular 8x8x1000 mm
1 x	Birch plywood plate 600x300x3.0 mm

26,480.40EUR