Inicio » Catálogo » Veleros » Gran Escala » TM02043DL

1,100.00EUR

Ventus 2cx 4,5 m de Luxe
[TM02043DL]

The maquette of the well known glider in scale 1: 4th.

VENTUS 2cx is supplied in ARF verzion, its Coated with foil Oracover®.

The model has an operated ailerons (using 2 servos), flaps (4 servos), air brakes (2 servos) elevator (1 servo), rudder (1 servo), tow hook (1servo STD), retract gear (1 servo).

De-luxe verzion:

Completely assembled and deposed model
The fuselage has inbuilt connectors and cables for aileron servos. The landing and air brakes, clutch housing of the wing, cabin including scale modeling closing, instrument panel and seats are also built in the fuselage. The rudder is attached to the fuselage with a control horn and bowden.
It contains the locking system of the wings against ejection. The tow hook, retractable landing gear on the tail wheel are also included.
The wing has mounted ailerons, flaps, air brakes, including servo cables, connecting cables to the fuselage and the system of locking the wings against the collateral eject.
High quality vinyl stickers are stuck on the model

This model is completely made in the Czech Republic.

Technical specification:
Wingspan: 4500 mm
Lenght:1610 mm
Weight: 4,9-5,6 kg
Surface: 75,2 dm2
Alar surface: 65,2-74,5 g/dm2
Perfil: HQ 3/14-2,5/12
Channel: 8 channel, 10-12 servos

The de luxe ARF kit contents:
fiberglass, white colored fuselage with sliding cabin, fiberglass seat and dashboard panel, these parts are already instaled
The wing : the center of the wing is made of polystyrene, coated with a veneer, reinforced with glass fiber and carbon flange. The construction is supplemented by beams which are connecting the top and bottom of the cover. The enclosure for mounting winglets, winglets, wing flaps and the brake shields are also installed. The wing is coated by Oracover® foil.
white through-colored fiberglass elevator
white through-colored fiberglass rudder
white through-colored fiberglass wing tip
fiberglass frame of the cabin with glued clear cabin. The maquette window and closing is also installed
building instructions
iron wing joiner
small accessories

Controls:
ailerons and flaps (6 micro servos)
elevator (1 micro servo)
rudder (1 servo STD)
airbrakes (2 micro servos)
retract gear (1 servo STD)
tow hook (1 servo STD)

Bajo pedido

Comentarios

Búsqueda Rápida

Cesta de Compras

1 x	Servo NARO Max Std
1 x	Bateria arranque incl. compresor inflado
1 x	Recambio lonas Hovercraft
1 x	e-Looger V3
1 x	Varilla ABS 5,0x1000 mm
1 x	Acoplador "Z" Ø 2 (2 uds)
2 x	Varilla ABS 3,0x1000 mm
1 x	Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs)
1 x	Clevis plastico I=30 mm / hole 2.5mm / pin 1 (2 pcs)
1 x	Liston ABS I 2,5x1,25x330 mm
1 x	Liston ABS 1,0x5,0x1000 mm
2 x	Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs)
1 x	Acoplador M2,5 Ø 2 mm (10 pcs)
2 x	Ball Link ALU M3 - RH (1 pcs)
2 x	Acople ALU M2,5 Ø 6 (2 uds)
1 x	Varilla ABS 6,0x1000 mm
1 x	Acoplador Micro M2 Ø 1 mm (10 pcs)
1 x	Liston ABS 1,5x3,0x1000 mm
1 x	Acoplador "Z" Ø 1 (2 uds)
1 x	Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm
1 x	Varilla ABS 1,0x1000 mm
1 x	Ball link ALU M2,5/2 con rodamiento (1 pcs)
1 x	Liston ABS 2.0x8.0x1000 mm
1 x	Acoplador para cable M4 (10 pcs)
2 x	Kwik link AL M3 L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x	Liston ABS H 1,5x1,5x330 mm
1 x	Liston ABS 1,0x4,0x1000 mm
1 x	Ball link Aluminio M3 (2 pcs)
1 x	Liston ABS 2.0x5.0x1000 mm
1 x	Acople ALU M2 Ø 4 (2 uds)
1 x	Liston ABS 1,5x8,0x1000 mm
1 x	Liston ABS I 3,5x1,75x330 mm
1 x	Ball link aluminio M3 V1 azul (10 pcs)
1 x	Liston ABS 1,5x4,0x1000 mm
1 x	Liston ABS 1,0x2,0x1000 mm
1 x	Liston ABS H 2,0x2,0x330 mm
2 x	Liston ABS I 10x5x1000 mm
1 x	Ball link aluminio M3 V1 rojo (10 pcs)
1 x	Liston ABS 2.0x10.0x1000 mm
1 x	Varilla ABS 4,0x1000 mm
1 x	Acople ALU M3 Ø 4 (2 uds)
1 x	Acople ALU M3 Ø 6 (2 uds)
2 x	Liston ABS I 20x10x1000 mm
1 x	Ball link ALU M2/2 con rodamiento (1 pcs)
1 x	Acoplador Micro M2 Ø 0,8 mm (10 pcs)
1 x	Acople ALU M2,5 Ø 3 (2 uds)
1 x	Acople ALU M2,5 Ø 4 (2 uds)
1 x	Varilla ABS 2,5x1000 mm
1 x	Kwik link AL M3 con Clip (2 pcs)
1 x	Acoplador M3 (10 uds)
1 x	Ferrita 27x14x7 mm
3 x	Ferrita con funda
1 x	Cable "Y" equilibrador 5S, 2x JST-XH / 1x JST-EH
1 x	BEC 3A FOXY
2 x	Adaptador JST-XH
1 x	Cable "Y" carga 4 mm (2 IN-1 OUT)
1 x	Adaptador 5 LiPos XH>EH
1 x	BEC Mini JETI
1 x	Adaptador (GP/KO hasta 4S) para CellPRO 4S
1 x	Adaptador Dean "T" - Futaba
1 x	Alambre de cobre esmaltado en negro Ø0,2 mm (5 m)
1 x	Bec MR UBEC 5A (5v/6v/7v)
1 x	Cable BEC 30 cm (macho)
1 x	CC 01
1 x	Cable "Y" equilibrador 7S, 2x JST-XH / 1x JST-EH
1 x	Spray pintura Elapor Rojo 400 ml
2 x	Disolvente barniz tensor 500 ml
2 x	Pintura GHT Lexan negro 150 ml
2 x	Relleno Presto SF Light Filler styrene-free (420 g)
1 x	Prolongador 15 cm (Futaba)
1 x	Prolongador JR/Graupner hembra 40 cm de silicona
1 x	Extension silicona 30 cm macho (Graupner)
1 x	Prolongador Futaba macho 40 cm de silicona
1 x	Prolongador PVC 150 cm (Graupner)
1 x	Prolongador S-Bus JR/JR 20cm
2 x	Prolongador servo 15cm MULTIPLEX
2 x	Extension silicona 30 cm macho (Futaba)
1 x	Prolongador 90 cm (Futaba)
2 x	Prolongador Futaba hembra 40 cm de silicona
1 x	Prolongador servo 20 cm HITEC/JR
2 x	Prolongador cable servo 0,14 PVC, conector ZH micro
1 x	Extension silicona 30 cm hembra (Graupner)
1 x	Cable S.BUS 3 salidas 100 mm
2 x	Prolongador 30 cm (Futaba)
1 x	Cable silicona "Y" 30 cm (Graupner)
1 x	Prolongador S-Bus 1-2 silicona 120 cm
1 x	Helice FALCON 32,5x11 PUSHER Carbono
1 x	Piloto "Duke" Legends Series(Slimline)
1 x	Cable pull pull SUS 3m + cierres
1 x	Liston ABS 1,5x6,0x1000 mm
1 x	Polea de bronce 2,5/1 (2 pcs)
1 x	Terminales riostras M3x16 (2 uds)
1 x	Kwik link con brazo M5xM2,5xL30
2 x	Varilla mando roscada M2,5 (2 uds)
1 x	Pin Ø 1,6 mm para Kwik link MPJ2160/2161 (6 pcs)
1 x	Porta Kwik link M3 3 mm (2 pcs)
1 x	Soporte grifo FESTO vertical (1 pcs)
1 x	Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds)
1 x	Clevis con trasmisión M3
1 x	Ferrita 14x8x5.5 mm
2 x	Prisionero 5 mm Ø (4 uds)
1 x	MAX BEC
1 x	Prisionero aluminio 3.5 mm Ø (4 uds)
1 x	Eje rueda con accesorios
1 x	Tren retráctil veleros 3-7 Kg 3.8-4.3 (sin rueda) 70-82 mm
1 x	Prolongador 5 lipos conector JST - JST/C
1 x	Carena ruedas de carbono Katana Mini (2 pcs)
1 x	Interruptor RX/Batería
1 x	MAX BEC 2
1 x	Soporte reenvio para freno retractil
1 x	Pasta para estaño 20 g
1 x	Prisionero aluminio 5 mm Ø (4 uds)
1 x	Spray YELLOW Inca Lexan 150ml
1 x	Amortiguador FEMA 200 Newtons
1 x	Interruptor magnetico para DPSI RV Family
1 x	Spray adhesivo "INFUTAC" 500 ml
1 x	Prolongador 6 lipos conector XH > EH
1 x	Tren retráctil veleros 8-16 Kg 2.5-3.2 (sin rueda) 140 mm
1 x	Prolongador macho/hembra equilibrador Thunder Power 6S
1 x	Amortiguador FEMA 100 Newtons
1 x	Interruptor OPTO Gas Engine
1 x	Servo slow down unit (0,7-14,7 sec)
1 x	Interruptor OPTO Gas Engine
1 x	Cera desmoldeante 250ml
1 x	SBEC 30 D
1 x	Fuente alimentacion NT 25 Amp.
1 x	Relleno balsa KAVAN 200ml - color balsa
1 x	Varilla ABS 1,5x1000 mm
1 x	Prolongador 2/3 lipos conector JST/C
1 x	USB cable ALTIS
1 x	Acoplador M2,5 Ø 3 mm (10 pcs)
1 x	Acoplador M2 (10 uds)
1 x	Prolongador macho TP 4/5S
1 x	Prisionero aluminio 4 mm Ø (4 uds)
1 x	DUPLEX 2.4EX Central Box 210
1 x	Prisionero 3 mm Ø (4 uds)
1 x	Protector punta ala 30x10 (2 pcs)
1 x	Brazo direccional 16 mm Ø 4 mm
1 x	Brazo direccional 16 mm Ø 3 mm
1 x	Prisionero 3.5 mm Ø (4 uds)
1 x	Hélice 9x7 SlowFlyer
1 x	Juego pegatinas JEEMO "Andy"
1 x	LO 100 ARC 3.3m,cabina
1 x	Planeador PIROL
1 x	Cabina Astra
1 x	DINO Glider ARC
1 x	Motor ACTRO 28-4-880
1 x	Motor ACTRO 50-2-760
1 x	Fueraborda RETRO
1 x	Pin 2,0 para terminales riostras M2,0 ⌀ (6 pcs)
1 x	linea kevlar Ø 0,5 mm para pull pull (3 m)
1 x	Servo SAVOX SB-2270 SG Highvoltage brushless
1 x	Brazo doble servo Alu eje 3 mm
1 x	Horn metálico ajustable rosca M3
1 x	Manómetro de 4 mm
1 x	Bisagra de Flaps 33x9 mm (6 uds)
1 x	Kwik link aluminio IZD. M2.5 L: 23mm (2 uds) pin Ø 1.6
1 x	Kwik link micro 0.8mm (10 uds)
1 x	Pin Ø 2,5 mm para Kwik link MPJ2170/2173 (6 pcs)
1 x	Pasacables con soporte GFK "B" (2 pcs)
1 x	Pasacables con soporte GFK "A" (2 pcs)
1 x	Kwik link y brazo de nylon M4xM2,5xL30
1 x	Kwik link aluminio M3 L: 30mm (6 uds) pin Ø 2 mm
1 x	Rueda KOVO SLH 120x60 mm
1 x	Brazo servo Alu 90º eje 3 mm
1 x	EasyFLY Addon
1 x	Servo SAVOX SH 0254
1 x	Brazo servo "L" 65x49 mm (2 pcs)
1 x	Servo AN-20 MGBBA
1 x	Servo AN-8 HBA
1 x	Servo SAVOX SB-2272 SG Highvoltage brushless (Rotor de cola)
1 x	Mini termometro infrarrojos
1 x	Hélice Plegable CAM PROP 10x6 + Cono completo
1 x	Cargador LiPo Charger4
1 x	Antena RX 150 mm HoTT
1 x	Cierre cabina
1 x	Listón de HAYA redondo 4,0 x 1000 mm
1 x	Cono hélice fija 42 mm diámetro / eje 5,0 mm
1 x	Emisora GRAUPNER MZ-24 Pro
1 x	Prolongador silicona 100 cm (Graupner)
1 x	Cable silicona hembra batt. receptor 30 cm (Futaba)
1 x	Conector MULTIPLEX hembra 30 cm
1 x	Cable servo PREMIUM MAXI 50m (blanco/rojo/azul) PVC
1 x	Cable servo PREMIUM MAXI 200m (blanco/rojo/azul) PVC
1 x	Extension 50cm Dispaly Royal/Champion SRS
1 x	Prolongador 100 cm (Futaba)
1 x	Cable servo PREMIUM 10m (blanco/rojo/azul)
1 x	Cargador Adaptador 12v coche
1 x	Crimpadora
1 x	Conector DEANS hembra 30 cm
1 x	Prolongador cable servo POWERBOX 75cm
1 x	Prolongador cable servo POWERBOX 50cm
1 x	Prolongador S-Bus 1-2 silicona 30 cm
1 x	Prolongador cable servo POWERBOX 25cm
1 x	Batetia LiFe 3200 mAh 6.6v MPX PowerBox
2 x	Cargador 220/110v
1 x	Cable silicona macho batt. receptor 30 cm (Futaba)
1 x	Conexion PREMIUM MAXI fuselaje/alas para 3 servos SUB-D 200 cm
1 x	Extension silicona 30 cm hembra (Futaba)
1 x	APM2,6 Power module con BEC 5,3 V DC
1 x	Liston ABS 1,0x3,0x1000 mm
1 x	AIREX® M060 lámina (amarilla) 1200x550x4,0 mm (5 pcs)
1 x	Canulas repuesto Mixing tube 50+25g (10 pcs)
1 x	Hélice 11x4,7 SlowFlyer
1 x	Adaptador para motor A60-V2
1 x	Bancada motor HACKER A60 aluminio
1 x	Backmountset complete A40
1 x	Destornillador Torx® TX6
1 x	Eje para motor Hacker A60 L (140 mm)
1 x	Hélice 9x4,7 SlowFlyer
1 x	Muñeco Operario 1:32
1 x	Varilla mando roscada M3 (2 uds)
1 x	Varilla mando doble roscada duraluminio M3 130 mm (2 pcs)
1 x	Varilla mando doble roscada duraluminio M3 120 mm (2 pcs)
1 x	Varilla mando doble roscada duraluminio M3 100 mm (2 pcs)
1 x	Surprise XII Timón de Dirección (Freudenthaler)
1 x	Swift S1 De-luxe ARF 3.730 mm (TopModel)
1 x	External LED's (2 pcs)
1 x	Adaptador MPX-EC3 10cm
1 x	Pin Ø 2 mm para Kwik link MPJ2162/2163 (6 pcs)
1 x	Cable BEC 30 cm (hembra)
1 x	Cianocrilato MD GA460 odourless 20g
1 x	AIREX® M060 lámina (amarilla) 1200x550x1,2 mm (10 pcs)
1 x	GS-200 Electronica
1 x	Cable freno retractil
1 x	Manual Controller
1 x	Tren de aterrizaje ER40 Xcalibur Combo completo
1 x	Cinta fibra de vidrio 130 g / m² (Silane, liso) 25 mm, 100m
1 x	Guardabarros ruedas 112/127 mm
1 x	Bayoneta: Fibra de vidrio/Carbono (13.7/12.5) x 1000 mm
1 x	Fuente Alimentacion eFuel 30A
1 x	Prisionero 2 mm Ø (4 uds)
1 x	ER-40eVo Set A [2x ER40 + RB-45]
1 x	Set montaje amortiguador para modelos 8-16 Kg
1 x	AIREX® M060 lámina (amarilla) 1200x550x2,0 mm (20 pcs)
1 x	ER-40eVo Set B [Complet set + GS200]
1 x	Pata delantera ER40 (con rueda 80mm)
2 x	Tren aterrizaje Electrico ASPIRE (Electron Retracs)
1 x	AIREX® M060 lámina (amarilla) 1200x550x6,0 mm (5 pcs)
1 x	LENTUS MultiplexHelice 8x6
1 x	Módulo Bluetooth
1 x	Interruptor SAFET-SWITCH 12HV Twinbatt
1 x	FunCub NG verde RR
1 x	Kit propulsion EXTRA 330 SC
1 x	Cable S.BUS 3 salidas 300 mm
1 x	Eje para motor Hacker A60 L V4
1 x	Bateria LiFe TopFuel 3100 mAh 3s MTAG 30C
1 x	Eje para motor Hacker A30-XL V2
1 x	Adaptador para motor A50
1 x	Condensador 820 Addcap
1 x	Bancada Aluminio set radial motor A60-V2
1 x	Helice XOAR 20x10 Electrica
1 x	Eje para motor Hacker A40 L 8-Polos Turbina eléctica
1 x	Adaptador MPX-XT60 10cm
1 x	Varilla mando doble roscada aluminio M3 60 mm (2 pcs) knurled
1 x	Varilla mando doble roscada aluminio M2,5 70 mm (2 pcs)
1 x	Varilla mando doble roscada aluminio M3 60 mm (2 pcs)
1 x	Varilla mando doble roscada aluminio M3 40 mm (2 pcs)
1 x	Varilla mando doble roscada aluminio M3 90 mm (2 pcs) knurled
1 x	Varilla mando roscada M2,0 (2 uds) 250 mm
1 x	Varilla mando doble roscada SUS303 M2.5 65 mm (2 pcs)
1 x	Varilla mando doble roscada aluminio M3 50 mm (2 pcs)
1 x	Varilla mando doble roscada duraluminio M3 50 mm (2 pcs)
1 x	Varilla mando doble roscada aluminio M3 100 mm (2 pcs)
1 x	Varilla mando doble roscada aluminio M3 80 mm (2 pcs)
1 x	Varilla mando doble roscada aluminio M2,5 60 mm (2 pcs)
1 x	Varilla mando doble roscada aluminio M3 90 mm (2 pcs)
1 x	Varilla mando doble roscada SUS303 M2.5 70mm (2 pcs)
1 x	Varilla mando doble roscada aluminio M2,5 90 mm (2 pcs)
1 x	Varilla mando doble roscada aluminio M3 100 mm (2 pcs)
1 x	Varilla mando doble roscada duraluminio M3 70 mm (2 pcs)
1 x	Varilla mando doble roscada aluminio M3 70 mm (2 pcs) knurled
1 x	Varilla mando doble roscada aluminio M3 80 mm (2 pcs)
1 x	Varilla mando doble roscada duraluminio M3 90 mm (2 pcs)
1 x	Varilla mando doble roscada duraluminio M3 110 mm (2 pcs)
1 x	Varilla mando doble roscada duraluminio M3 80 mm (2 pcs)
1 x	Fundas de Luxe completas ASPIRE
1 x	Tren aterrizaje Electrico GALEB G4
1 x	HAWKER HUNTER 1:5,8 (1.770 mm)
1 x	Fundas de Luxe completas ODYSSEY
1 x	Prolongador Futaba 100 cm Ø 0,35 mm
1 x	Tren aterrizaje Electrico ODYSSEY (Electron Retracs)
1 x	LUNAK 4.00 m

17,601.51EUR