4.50EUR

CA Glue fast 20g
[R1501032]


CA Glue fast 20g
Superglue (fast) is a normal type Cyanoacrylate adhesive with fast setting, high flow abilit, and good penetration characteristics.

It has been specially formulated to achieve the strongest possible bond between well-mated, non-porous surfaces, such as rubber, metals, plastics, glass, etc.

Single-component
Transparent
Very low viscosity, high setting speed
Bonds obtain hand strength after 2-15 seconds
Special bottle*
*A metal needle is fitted in the lid, which is pressed into the opening of the bottle's dosing attachment when it is screwed on. This reliably prevents leakage, drying out and sticking of the opening. The dosing attachment allows a fine dosing of the adhesive.

Physical properties
Liquid state
Base Ethyl Cyanoacrylat
Colour clear
Specific Gravity (at 20 °C) 1.053~1.060
Refraction Index (n 20 D) 1.439
Flash Point (°C) >80 °C
Boiling Point (°C) 65/6mm Hg
Viscosity (cP) 3-5
Cured state
Colour clear
Specific Gravity (at 20 °C) 1.1~1.3
Processing temperature -55 - 80 °C
Refraction Index (n 20 D) 1.49
Dielectric Constant (bei 10 MHz) 3.5
Dielectric Loss (bei 10 MHz) 0.067
Soluble in Acetone, Dimethyl formamide,Nitromethame and Dimethyl sulfoxide.
Bond strength (Tensile shear strength, cured for 24 hours at 20-25 °C)
kg/cm²
Rigid PVC to rigid PVC 40-60
ABS to ABS 50-70
Polycarbonate to polycarbonate 80-120
Polystyrene to polystyrene 30-45
Natural rubber to natural rubber 5-9
Steel to steel 190-210
Stainless steel to stainless steel 200-220
Aluminum to aluminum 160-180
Copper to copper 150-170
Steel to rigid PVC 50-60
Stainless steel to neoprene 5-10
SBR to SBR 5-10
Cure speed
Seconds
ABS to ABS 4-5
Wood to wood 50-60
ABS to stainless steel 5-10
NBR to stainless steel 3-5
NBR to NBR 3-5
Stainless steel to stainless steel 3-5
ABS to NBR 3-5
Wood to ABS 5-10
Storage and shelf life:
Our superglue can be stored in a cool and dark place for about 1 year (for example in the refrigerator at + 5 °C).
At room temperature about 6 months. At temperatures above 20 °C the shelf life is further reduced (e. g. in the summer months)


temporarily out of stock
temporarily out of stock

Reviews

Customers who bought this product also purchased
Propeller MENZ-S 23x8
Propeller MENZ-S 23x8

temporarily out of stock
temporarily out of stock

Sparkplug NGK CM6
Sparkplug NGK CM6

temporarily out of stock
temporarily out of stock

TYGON tubo 1 m Diam. 3.4 x 2.0  mm
TYGON tubo 1 m Diam. 3.4 x 2.0 mm

temporarily out of stock
temporarily out of stock

Tygon tube 6.35 - 3.18 mm 1m
Tygon tube 6.35 - 3.18 mm 1m

temporarily out of stock
temporarily out of stock

Cyano SUPER - GOLD™ THIN (12g)
Cyano SUPER - GOLD™ THIN (12g)

temporarily out of stock
temporarily out of stock

CA Glue (medium) 20g
CA Glue (medium) 20g

temporarily out of stock
temporarily out of stock

Categories
* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
  
  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
    Cianocrylate->
      BSI Cianocrilates
      Cyanocrylate R&G
      KAVAN Ciano
      Yuki Model
    Epoxy->
    Resin/Gelcoat
    Glass Bubbles
    Contact adhesive
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x 5 mm M2 variable horn
1 x Cable control set
2 x Brass control horn M4 short for wire (4 pcs)
1 x Brass control horn M2 long for wire (10pcs)
1 x 6 mm M3 variable horn
1 x Horn 5/20 with M2 Bearing
1 x Brass control horn M2 short for wire (2 pcs)
1 x 6 mm red aluminium threaded horn with patella
1 x 20 mm carbon horn
1 x Cable with accesories
2 x Horn 6/20 with M3 Bearing
2 x Horn mando small (2 pcs)
3 x Fully Threaded Steel Rod M2,5 (2 uds)
2 x Horn 16,5x20 mm (2 pcs)
2 x Horn for flap control (1 pcs)
1 x Extra-long adjustable aluminium control horn 2,8x34
3 x Control horn long w/ball
1 x Brass control horn M4 short for wire (10pcs)
2 x Horn 5/10 with M2 Bearing
2 x Horn F3A de Titanium 16 mm (2 units)
3 x Brass control horn M2 large for wire (2pcs)
1 x 6 mm blue aluminium threaded horn with patella
1 x Horn 5/15 with M2 Bearing
2 x Horn DU-BRO 1/2 (2 pcs)
1 x Duralumium F3A horn 30x10x23,5 mm (2 pcs)
1 x Horn mando long (2 pcs)
1 x Horn 6/27 with M3 Bearing
1 x Adjustable brass horn threaded M3
2 x 6 mm aluminium horn with patella
1 x Horn 6/35 with M3 Bearing
1 x Jeti Black cap
1 x XH male balance (5S) connector (2 pcs)
1 x Connectors banna gold 5,5 mm (M/F)
1 x XH female balance (5S) connector (2 pcs)
1 x Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 5 m
1 x Connectors banna oro 8,0 mm 5 pcs(Female)
1 x Connectors banna oro 2 mm (M/F) (ultralight)
2 x Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 5 mm
2 x Conector BEC female (10 pcs)
2 x Connectors banna oro 4 mm (M/F) (ultralight)
1 x XH male balance (4S) connector (2 pcs)
1 x Gold antispark 5,5 mm plug
1 x Connectors banna oro 2 mm (M/F)
1 x Connectors banna oro 8,0 mm (M/F)
3 x Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch
1 x Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 7 mm
1 x Extra long horn 60x30
1 x Long extra-strong control horn with bearing 2,8x34
1 x XH male balance (2S) connector (2 pcs)
2 x XH female balance (4S) connector (2 pcs)
1 x Connectors DEANS (T)
1 x Connectors banana oro 6,0 mm Ultralight (M/F)
1 x Gold antispark 4 mm plug
3 x Sistema LDS - Ø12 mmr servos Ø 6/25 spline 60º (Futaba) pitch 6
1 x 2 mm female connector (2 pcs) with safety connector
1 x 30 cm DEANS female connector
1 x Connectors banna oro 3 mm (M/F)
2 x Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 6 mm
1 x Connectors banna oro 0,8 mm (M/F)
1 x Horn micro type4 Ø 0,5 (2 pcs)
1 x Horn DUBRO 1/2A
1 x Horn with ball 40x30
1 x Carbon fibre tube -TAPERED- 3k-PW (10 x 5 x 0.3) x 880 mm
1 x Carbon tube (L 1000 mm, Ø16 mm, Ø12 mm)
2 x ABS tube 4.0x2.0x1000 mm
1 x ABS tube 8.0x6.0x1000 mm
2 x ABS tube 7.0x5.0x1000 mm
2 x ABS tube 12.0x10.0x1000 mm
1 x ABS tube 5.0x4.0x156 mm
1 x ABS tube 2.0x1.0x1000 mm
1 x ABS tube 3.0x1.0x1000 mm
1 x ABS tube 7.0x6.0x1000 mm
1 x Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm)
1 x Carbon tube (L 1000 mm, Ø10 mm, Ø8 mm)
1 x ABS tube 9.0x8.0x1000 mm
1 x ABS tube 3.0x2.0x1000 mm
2 x ABS tube 6.0x5.0x1000 mm
1 x Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm)
2 x ABS tube 6.0x4.0x1000 mm
1 x Digital scale up to 40 kg
1 x 
1 x Fresa corte diamante Ø 1.4mm (bola)
1 x Cut tube
1 x Fabric scissors curved (offset handles), 16 cm / 6" length
1 x Digital weight, angle and balance meter BASIC
1 x Fresa corte diamante Ø 2.3mm (bola)
1 x Ball Link Plier
1 x 2,0x50 mm allen screwdriver
1 x Fresa corte diamante Ø 2.35mm (flame)
1 x Concave-Convex sandpaper file 13 mm
1 x Copier 5x20 cm pcs
1 x Fresa corte diamante Ø 1.0mm (bola)
1 x Crimping tool
2 x 
1 x Disposable Injector Bags (30x16cm) 100 pcs
1 x 2,5x60 mm allen screwdriver
1 x Aramid fibre shears Proton®, 21 cm / 8" length
1 x EC-Cutter
1 x 55% silver electrodes (2 pcs)
1 x Copier 2x20 cm pcs
1 x Boxed KIT OF 7 Rotary Burrs FINE
1 x Dean-T Plug Mold
2 x 
1 x 3,0x60 mm allen screwdriver
1 x Small aluminium horn red (2pcs)
1 x ABS angle 5,0x5,0x1000 mm
1 x Round Rod 1,5x1000 mm
1 x Support Flush MPX Conector (6 pcs)
1 x Banna gold connector 2,5 mm (M/F)
1 x Connectors banna oro 3,5 mm (M/F)
1 x Conector FUTABA Servo male BLUE silicon (10 pcs)
1 x 30 cm MULTIPLEX female connector
1 x Connector CAN 15
1 x Conector MT-60 (pair)
1 x Small aluminium horn gold (2pcs)
1 x PIN Connector female (100 pcs)
2 x Threaded coupler ALU M2 Ø 3 (2 uds)
2 x Rudder forward 80x28 "type Kato"
1 x Threaded coupler ALU Left M2,5 Ø 3 (2 uds)
1 x MPX screwable clips (5 pcs)
1 x Wing connector 8pin with pin strip, plug & socket
1 x Horns indoor
2 x Short adjustable control horn 3x24
1 x Indoor hinge with servo arm integraded
1 x Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 5 mm
1 x Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 4 mm
2 x Horn with ball 55x40
1 x 100 Newtons FEMA absorber
1 x Long adjustable aluminium control horn with bearing 2,8x15
1 x Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 6 mm
1 x 16mm Gear-Spotlight, 4W
1 x DPSI RV Mini 6 Magic
1 x Filter Capacitor JR
2 x DPSI Micro SingleBat 5.9V/7.2V F3A Edition magnetic switch
1 x OPTOTRONIX Aurora LCU
1 x Switch magnet for gas cap and magnet switch actuators
1 x Landing lights 18 mm (0.71in)
1 x DPSI OCP Overload protection
1 x DPSI RV Mini 6 Magic with Gas-Cap switch
1 x LH long black aluminium horn L31xH30 (2pcs)
1 x Threaded coupler ALU M2,5 Ø 3 (2 uds)
1 x Micro control horn T2 Ø 1
1 x Threaded coupler ALU M2 Ø 4 (2 uds)
1 x LH long aluminium horn L31xH30 (2pcs)
1 x Nitroverdu 500 ml
1 x Plasti Dip Liquid Tape 429 ml black
1 x Spray YELLOW Inca Lexan 150ml
1 x ABS tube 4.0x3.0x1000 mm
1 x 160 mm carbon undercarriage (2pcs)
1 x Heat sink for Optotronix LEDs
1 x 1/6 Pilot "Garry"
1 x 152x46 Ø6.0 mm aluminium core wheel
1 x Combo lighting module with covering drop shape
1 x Jet Afterburner Simulator NF-Jet3 RYS
1 x 8Wx2 Navigation & Strobe, 11mm Green/White
1 x 102 mm INO spinner (carbon imitation)
1 x 1/4 Pilot "Heidi"
1 x Resistor 3W 5% OR47
1 x 25 mm carbon servo arm
1 x Hard brass tubing (L 1000 mm, Ø2.0 mm, Ø1.2 mm)
1 x ABS tube 14.0x10.0x1000 mm
1 x 1/6 Pilot "John"
1 x 1/4 Pilot "Mike"
1 x 110x55 mm SLH KOVO wheel
1 x Cover cap drop-shaped paintable 43 mm
1 x LED wire (green - 2pcs)
1 x Steel brush wheel with 2.35mm
1 x LED blink wire flashing (blue - 2pcs)
1 x Smart Soldering Iron 110W/230V AC
1 x Tachometer Hyperion Multi-pala
1 x Set fresas corte acero-carburo Ø 1.8/2.3 mm (2 pcs)
1 x Starter 12v (Max 90 and 15ccm)
1 x silverlot 45% - 1,50x500 mm solder rods (2 pcs)
1 x Medidor ángulos y/o incidencias
1 x Truck-trailer for gliders 720 x 285 mm
1 x 25,0 mm 3-BL M4 hydro-propeller (rigth hydropropeller)
1 x 12x6 tree blades propeller
1 x 15x7 tree blades propeller
1 x 16x10 tree blades propeller Master Airscrew
1 x FIALA Propeller 23x8 Electric
1 x Propeller 9x4,7 SlowFlyer
1 x 76 mm light wheels (2 pcs)
1 x Retract undercarriage
1 x Reductora IPS 150 DX2BB-FXCS 11,8:1
1 x Reductora IPS 150 DX2BB-DXCS 9,7:1
1 x Z Bender - S Type Tool
1 x CellPRO 4S Adaptader (GP/KO up to 4S)
1 x 14 mm Portholes for screws (10 pcs)
1 x 28 mm turnbuckle
1 x 12x8 tree blades propeller
1 x 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x 290 mm M4/4 mm Prop shaft
1 x Servo NARO Max Std
1 x 25,0 mm 3-BL M4 hydro-propeller (left hydropropeller)
1 x 12 mm portholes (10 pcs)
1 x 3 mm Leader (L 100 mm)
1 x 2.3 mm Adapter for 30 mm spinners
1 x 29,0 mm propeller (rigth propeller)
1 x Cooler motor type 150
1 x Foam wheel Ø 38 mm (2 pcs)
1 x XH male balance (8S) connector (2 pcs)
1 x Connectors MPX black female
4,504.84EUR
Manufacturers
Manufacturer Info
R-G.de
R-G.de Homepage
Other products
Languages
Español English
Currencies