Top » Catalog » Hardware » Adhesives/Resin/Epoxy » Epoxy » Epoxy R-G » R1001101

29.50EUR

Epoxy Resin L + Hardener L (40 min) 1Kg (715g Resin L + 285g Har
[R1001101]

Epoxy Resin L and Hardener L 40 min. (1 Kg) 715g Resina / 285g Hardener

The resin system Epoxy Resin L + Hardener L yields superior impregnating and wetting properties towards carbon, glass, aramid and natural fibres.

Low viscosity
Highly transparent
High degree of UV stability
Tack-free curing even of thin layers
Glass transition temperature (Tg) max. 76 °C (post-curing at 60 °C / 15 h)
High static and dynamic strength
Free of nonylphenol and DETA
Processing time: 40 minutes (100 g / 20 °C)
Mixing ratio:
100 : 40 parts by weight resin : hardener
100 : 45 parts by volume resin : hardener
It exhibits a very good price/performance ratio and is suitable for the following processing procedures:
Hand laminating
Vacuum moulding
Press moulding
Expertise for the resin system Epoxy Resin L + Hardener L: this system is not cytotoxic (cell damaging), important for applications in medical purposes.
Mechanical properties (Neat resin after curing)
Flexural test
Flexural strength (DIN EN ISO 178): 111 MPa
Flexural modulus (DIN EN ISO 178): 2.960 MPa
Tensile test
Tensile strength (DIN EN ISO 527): 69 MPa
Elongation at break: 4.7 %
Compression test
Compressive strength (DIN EN ISO 1426): 91 MPa
PoxySystems® is a registered trademark of R&G
General information about the system "Epoxy Resin L" with Hardeners S, L, CL, EPH 500, EPH 161, W 300, GL 1 and GL 2
* Low viscosity, free of solvents and fillers
* Fast impregnation of glass, aramid, carbon and natural fibres
* High static and dynamic strength (GL approval with the Hardeners GL 1 and GL 2 being present

Epoxy Resin L with the corresponding Hardeners S, L, CL, EPH 500, EPH 161, W 300, GL 1 and GL 2 is the most commonly used laminating and adhesive resin in R&G`s delivery programme.

In conjunction with the Hardeners S (15 minutes), L (40 minutes), CL (60 minutes), EPH 500 (60 minutes), EPH 161 (90 minutes), W 300 (300 minutes), GL 1 (30 minutes) and GL 2 (210 minutes), this epoxy resin exhibits similar mechanical properties to those of the laminating systems usual aerospace .Its heat deflection temperature reaches from 60 °C (S, L, EPH 500, W 300), to 80 °C (GL 1 and GL 2, after post-curing), to 95 °C (CL, after post-curing) and finally to 120 °C (EPH 161, after post-curing).

Its low surface tension, good adhesion, and minimal curing shrinkage makes the Epoxy Resin L ideal for bonding wood, metal, foamed polystyrene like Styropor® etc. It can be processed in all of the customary methods, e.g. hand lay-up, pressure and vacuum impregnation, press moulding and filament winding.

under request

Reviews

Customers who bought this product also purchased

MPS Gas-Cap-Powerswitch under request	Epoxy SLOW-CURE™ 30 min (130g) under request	Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll under request
Servo HITEC HSB-9380TH under request	Stainless steel cable Ø 0.5 mm (10 m) under request	Epoxy FINISH-CURE™ 20 min (130g) under request

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
    Cianocrylate->
    Epoxy->
      EMC-Vega
      KAVAN
      Loctite
      Resoltech
      Epoxy BSI
      Epoxy R-G
    Resin/Gelcoat
    Glass Bubbles
    Contact adhesive
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

Emisora Spektrum NX10 10ch (solo Tx)
619.92EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	ABS tube 7.0x5.0x1000 mm
3 x	ABS tube 10.0x8.0x1000 mm
1 x	ABS tube 8.0x7.0x1000 mm
1 x	ABS tube 6.0x4.0x1000 mm
3 x	Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm)
1 x	ABS tube 16.0x14.0x1000 mm
1 x	Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm)
1 x	ABS tube 2.0x1.0x1000 mm
1 x	Carbon tube (L 1000 mm, Ø16 mm, Ø12 mm)
1 x	Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm)
2 x	ABS tube 9.0x7.0x1000 mm
2 x	Carbon tube (L 1000 mm, Ø16 mm, Ø14 mm)
2 x	ABS tube 7.0x6.0x1000 mm
1 x	ABS tube 5.0x3.0x1000 mm
1 x	ABS tube 5.0x4.0x156 mm
1 x	ABS tube 9.0x8.0x1000 mm
2 x	Carbon tube (L 1000 mm, Ø18 mm, Ø16 mm)
1 x	Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm)
1 x	ABS tube 4.0x3.0x1000 mm
2 x	Carbon tube (L 1000 mm, Ø2 mm, Ø1 mm)
2 x	Carbon tube (L 1000 mm, Ø22 mm, Ø21 mm)
1 x	ABS tube 4.0x2.0x1000 mm
1 x	ABS tube 3.0x2.0x1000 mm
1 x	ABS tube 8.0x6.0x1000 mm
1 x	ABS tube 20.0x18.0x1000 mm
1 x	ABS tube 18.0x16.0x1000 mm
1 x	ABS tube 6.0x5.0x1000 mm
1 x	U Profile ABS 5,0x10,0x1000 mm
1 x	ABS angle 2,0x2,0x1000 mm
2 x	5 line servos wire black (1 m)
1 x	Silicone 0,50 qmm servos wire Futaba (100 m)
1 x	ABS angle 3,0x3,0x1000 mm
1 x	PVC 0,14 qmm servo wire Futaba (5 m)
2 x	Silicone 0,25 qmm servos wire Graupner (100 m)
3 x	Cable servo PREMIUM 1 m (blanco/rojo/negro) AWG21 + AWG26 TPE
1 x	Profile ABS half cane 3x1000 mm
1 x	Cable servo PREMIUM MAXI 100m (blanco/rojo/azul) PVC
2 x	Green silicone 0,25 qmm wire (50 m)
2 x	ABS angle 1.5x1.5x1000 mm
1 x	White silicone 0,25 qmm wire (150 m)
1 x	JR silicone servo wire 0,35 qmm / 5m
2 x	PVC 0,35 qmm servos wire Graupner (100 m)
1 x	Black silicone 0,25 mm² wire (25 m)
2 x	ABS angle 4,0x4,0x1000 mm
2 x	10m servo "Premium" wire (white/red/blue)
1 x	Profile ABS Square 3 x 1000 mm
1 x	ABS "T" angle 6.0x6.0x1000 mm
2 x	ABS angle 6,0x6,0x1000 mm
3 x	Cable Cargador FUTABA
2 x	Silicone red 0,25 mm² wire (25 m)
2 x	Cabel PVC 2 x 0.25 mm2 (5 m) red-black
1 x	ABS angle 10,0x10,0x1000 mm
1 x	Profile ABS half cane 2.0x1000 mm
3 x	U Profile ABS 2,0x4,0x1000 mm
1 x	Streamline Stainless Steel Tubing 14.5x9.6x1000 mm
2 x	ABS "T" angle 8.0x8.0x1000 mm
1 x	L-Connector 1.0 mm x 1000 mm
2 x	Silicone 0,14 qmm servos wire Graupner (5 m)
1 x	50m servo "Premium" wire (white/red/blue)
2 x	L-Connector 4.0 mm x 1000 mm
2 x	Silicone 0,35 qmm servos wire Futaba (100 m)
1 x	Cable servo PREMIUM MAXI 10m (blanco/rojo/azul) PVC
2 x	T-Connector 4.0 mm x 1000 mm
4 x	PVC 0,14 qmm servos wire Hitec/Mpx (5 m)
1 x	ABS "T" angle 2.0x2.0x1000 mm
1 x	ABS angle 5,0x5,0x1000 mm
1 x	Silicone 0,14 qmm servos wire Graupner (100 m)
1 x	Streamline Stainless Steel Tubing 19.5x9.8x1000 mm
1 x	Profile ABS half cane 2.5x1000 mm
1 x	Streamline Stainless Steel Tubing 7.5x4.5x1000 mm
1 x	White silicone 0,25 mm² wire (25 m)
1 x	Flat Connector 4.0 mm x 1000 mm
1 x	Profile ABS Square 4 x 1000 mm
1 x	U Profile ABS 3,0x6,0x1000 mm
2 x	Cross Connector 4.0 mm x 1000 mm
2 x	Silicone 0,25 qmm servos wire Graupner (5 m)
3 x	Silicone 0,35 qmm servos wire Graupner(100 m)
2 x	Streamline Stainless Steel Tubing 10.5x5.7x1000 m
2 x	Silicone 0,50 qmm servos wire Graupner(100 m)
1 x	Streamline Stainless Steel Tubing 15.5x8.5x1000 mm
1 x	Carbon tube (L 1000 mm, Ø7 mm, Ø5 mm)
2 x	Carbon tube 3K-PW (L 1000 mm, Ø14 mm, Ø12 mm)
1 x	Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm)
1 x	Carbon tube (L 1000 mm, Ø6 mm, Ø4 mm)
1 x	Carbon tube (L 1000 mm, Ø3 mm, Ø2 mm)
1 x	Carbon tube 3K-PW (L 2000 mm, Ø12 mm, Ø10 mm)
1 x	Carbon tube (L 1000 mm, Ø18 mm, Ø15 mm)
1 x	Carbon tube (L 1000 mm, Ø4 mm, Ø2,5 mm)
1 x	Carbon tube (L 1000 mm, Ø14 mm, Ø12 mm)
2 x	Carbon tube 3K-PW (L 1000 mm, Ø19 mm, Ø15 mm)
1 x	Carbon tube 3K-PW (L 2000 mm, Ø14 mm, Ø12 mm)
1 x	Carbon tube 3K-PW (L 2000 mm, Ø20 mm, Ø18 mm)
1 x	Carbon tube 3K (L 1000 mm, Ø 8 mm, Ø 7 mm)
1 x	Carbon tube 3K-Matt (L 1000 mm, Ø25 mm, Ø23 mm)
1 x	Carbon tube (L 2000 mm, Ø16 mm, Ø14 mm)
1 x	Carbon tube 3k-LW (L 2000 mm, Ø30 mm, Ø26 mm)
1 x	M3 Maxi ball link (2 uds)
1 x	Zurich Sport Sunglasse Dark Sensity BROWN Glasses
1 x	Threaded coupler ALU M2 Ø 4 (2 uds)
1 x	Quicklock washer 1.5 mm (10 pcs)
1 x	Carbon fiber rod 6.0 mmx1000 mm
1 x	Carbon fiber rod 7.0 mmx1000 mm
1 x	Extractor piñones 2.3/3.2 mm
1 x	Nylon hinge 15x0,3 (10 pcs)
1 x	10 mm Prop Adapter M12
1 x	Profile ABS half cane 8.0x1000 mm
1 x	3,2 mm Prop Adapter M8
1 x	Profile ABS triangular 4.0x1000 mm 90º
1 x	25,0 mm 3-BL M4 hydro-propeller (rigth hydropropeller)
1 x	2.3 mm Adapter for 30 mm spinners
1 x	Conexion PREMIUM MAXI fuselaje/alas 200 cm one4one
1 x	Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm
1 x	Cable set PREMIUM Maxi, SUB-Done 4three fuselage/wing 200 cm
2 x	XH 30 cm Female extension 0,25 mm2 silicone cable for 3 cell
1 x	10 mm Quick clamp_L (6 pcs)
2 x	Silicone black 0,5 qmm wire ( 25 m)
1 x	Cable servo PREMIUM MAXI 1 m (blanco/rojo/azul) PVC
1 x	Protective Cover for wires Ø 10 mm 1000 mm
2 x	Silicone black 0,75 qmm wire ( 25 m)
2 x	Set cables carga (Mini-JST, JST, XT60, Dean, EC3, TRX, Micro-T,
1 x	Fiberglass heat shield Ø 8 mm 1000 mm
2 x	Silicone red 0,75 qmm wire ( 1 m)
2 x	Silicone black 6,0 qmm wire (25 m)
1 x	Silicone red 4,0 qmm wire (25 m)
2 x	XH 30 cm Female extension 0,25 mm2 silicone cable for 5 cell
1 x	Rubber profile 10-2 mm 2M
1 x	Profile ABS Square 1 x 1000 mm
3 x	PVC 0,08 qmm Futaba servos wire (5 m)
1 x	Cable servo PREMIUM MAXI 50m (blanco/rojo/azul) PVC
1 x	L-Connector 1.5 mm x 1000 mm
1 x	Silicone 0,50 qmm servos wire Graupner(5 m)
1 x	White silicone 0,25 qmm wire (100 m)
3 x	V tail SILENT DREAM 2.200 mm (Elec or Glider)
1 x	Cable with accesories
1 x	Threaded coupler ALU M2,5 Ø 4 (2 uds)
1 x	Threaded coupler ALU Left M2,5 Ø 3 (2 uds)
1 x	Threaded coupler ALU M3 Ø 6 (2 uds)
3 x	Metalic nose for PROJETI
1 x	CF tube (L 1000 mm Ø0,7 mm, Ø0,3 mm)
1 x	Steel tube (L 1000 mm Ø10 mm, Ø9,7 mm)
1 x	ABS tube 5.0x4.0x1000 mm
2 x	1 m servo "Premium" wire (white/red/blue)
1 x	ABS tube 14.0x10.0x1000 mm
1 x	ABS tube 3.0x2.0x330 mm
1 x	Carbon tube (L 1000 mm, Ø10 mm, Ø8 mm)
1 x	ABS tube 3.0x1.0x1000 mm
1 x	Steel tube (L 1000 mm Ø9 mm, Ø8,7 mm)
1 x	Protective Cover for wires Ø 6 mm 1000 mm
1 x	6 mm Quick clamp_S (10 pcs)
1 x	Red silicone 1,0 qmm wire (50 m)
1 x	Protective Cover for wires Ø 20 mm 1000 mm
2 x	Silicone black 2,5 qmm wire ( 1 m)
1 x	Silicon black 2,5 qmm cable ( 25 m)
1 x	Silicone red 4,0 qmm wire ( 1 m)
2 x	Silicone black 0,5 qmm wire ( 1 m)
1 x	XH 30 cm Female extension 0,25 mm2 silicone cable for 2 cell
2 x	Silicone black 1,5 qmm wire ( 1 m)
2 x	Silicone black 0,75 qmm cable ( 1 m)
1 x	PVC 0,08 qmm Graupner servos wire (5 m)
1 x	Silicone red 0,5 qmm wire ( 25 m)
1 x	PVC 0,14 qmm servos wire Graupner (100 m)
1 x	Silicone black 1,0 qmm wire (100 m)
1 x	Protective Cover for wires Ø 15 mm 1000 mm
1 x	Silicone red 1,0 qmm wire ( 1 m)
1 x	Silicone 0,35 qmm servos cable Futaba (5 m)
1 x	Fiberglass heat shield Ø 4 mm 1000 mm
2 x	Silicone black 1,0 qmm wire ( 1 m)
1 x	Protective Cover for wires Ø 3 mm 1000 mm
2 x	Silicone red 0,5 qmm wire ( 1 m)
1 x	Silicone black 1,5 qmm wire ( 25 m)
1 x	Silicone black 6,0 qmm wire ( 1 m)
1 x	Silicon red 1,0 qmm cable ( 25 m)
1 x	Silicone black 4,0 qmm wire ( 1 m)
1 x	Silicone black 1,0 qmm wire ( 25 m)
1 x	Silicone red 2,5 qmm wire ( 1 m)
1 x	Fiberglass heat shield Ø 6 mm 1000 mm
1 x	XH/XH 30 cm Female extension 0,25 mm2 silicone cable for 2 cell
2 x	PVC 0,14 qmm servos wire JR/Graupner (5 m)
1 x	Foil for sticking flaps and ailerons
1 x	SE Ring 250 mm (2 pcs)
1 x	SE Ring 400 mm (2 pcs)
1 x	Steel tube (L 1000 mm Ø5 mm, Ø4,7 mm)
1 x	Ring 320 mm length (5 pcs)
1 x	Cinta Goldfix 1m
1 x	SE Ring 360 mm (2 pcs)
1 x	Waterproof adhesive tape, width 19mm, length 25m
1 x	Tape GFK 50 mm
1 x
1 x	EXTRA 300 78" V3 Yellow/Red/Blue
1 x	ANGEL 48" pp red/blue/white
1 x	38 mm fenders (10 pcs)
1 x	4 mm Prop Adapter M8
2 x	Nose OPTIMA 2.200 mm (Elec or Glider)
1 x	33,0 mm propeller (left propeller)
1 x	Motor mount class 48"
1 x	EDGE 540-A 74" (1880 mm)
1 x	SLICK 103" Red/Yellow/Black ARF (Color 2) 2630 mm
1 x	EXTRA 300 78" V3 Orange/Blue
1 x	Streamline Stainless Steel Tubing 11.5x6.5x1000 m
1 x	Streamline Stainless Steel Tubing 9.0x5.0x1000 mm
2 x	Motor mount VANQUIST 48" F3A
1 x	Motor mount EDGE 540 48"
1 x	PITTS CHALLENGER 87″ 2.20m (120cc) 03 ARF
1 x	VARIO module Hott
1 x	Epoxy 30 min. 200g
1 x	Mudguard wheels 112/127 mm
1 x	Epoxy QUIK-CURE™ 5 min (130g)

11,483.78EUR