Top » Catalog » Hardware » Adhesives/Resin/Epoxy » Epoxy » Epoxy R-G » R1001351

96.00EUR

Epoxy 40 min (Resin). 5 Kg
[R1001351]

General information about the system Epoxy Resin L with different hardeners

Low viscosity, free of solvents and fillers
Fast impregnation of glass, aramid, and carbon fibres
High static and dynamic strength
Epoxy Resin L with the corresponding hardeners is the most commonly used laminating and adhesive resin in the R&G delivery programme.

In conjunction with the Hardeners S (15 minutes), L (40 minutes), CL (60 minutes), EPH 500 (60 minutes), EPH 161 (90 minutes), W 300 (300 minutes), GL 1 (30 minutes) and GL 2 (210 minutes), this epoxy resin exhibits similar mechanical properties to those of the laminating systems usual aerospace .Its heat deflection temperature reaches from 60 °C (S, L, EPH 500, W 300), to 80 °C (GL 1 and GL 2, after post-curing), to 95 °C (CL, after post-curing) and finally to 120 °C (EPH 161, after post-curing).

Epoxy Resin L has a low viscosity, is free of solvents and fillers, and ideal for impregnating glass, aramid, and carbon fibres. Its low surface tension, good adhesion, and minimal curing shrinkage makes it ideal for bonding wood, metal, foamed polystyrene, etc. It can be processed in all of the customary methods, e.g. hand lay-up operations, pressure and vacuum impregnation, press moulding, winding, etc.

The well-proven R&G Epoxy Resin L in combination with Hardeners GL 1 and GL 2 offer an approval by the Germanische Lloyd for the construction of boats and rotor blades for wind turbines.
Expertise for the resin systems Epoxy Resin L + Hardener S, Epoxy Resin L + Hardener L, Epoxy Resin L + Hardener CL and Epoxy Resin L + Hardener EPH 500: these are not cytotoxic (cell damaging), important for applications in medical purposes.
Laminate structures for vehicle construction in combination with Hardener EPH 161 are approved by the TÜV-Süd (Document available in german language only).

Suitable hardeners for Epoxy Resin L:

Hardener S
Potlife: 20 minutes
Mixing ratio: 100 : 40 parts by weight resin to hardener, 100 : 45 parts by volume resin to hardener
Order no. 100 139-0 to 100 140-5

Hardener L
Potlife: 40 minutes
Mixing ratio: 100 : 40 parts by weight resin to hardener, 100 : 45 parts by volume resin to hardener
Order no. 100 144-0 to 100 145-5

Hardener EPH 161
Potlife: 90 minutes
Mixing ratio: 100 : 25 parts by weight resin to hardener, 100 : 49 parts by volume resin to hardener
Order no. 112 123-5 to 112 125-4

Hardener EPH 500
Potlife: 60 minutes
Mixing ratio: 100 : 63 parts by weight resin to hardener, 100 : 71 parts by volume resin to hardener
Order no. 100 147-2 to 100 147-8

Hardener W 300
Potlife: 300 minutes
Mixing ratio: 100 : 35 parts by weight resin to hardener, 100 : 42 parts by volume resin to hardener
Order no. 100 149-4 to 100 149-7

Hardener GL 1
Potlife: 30 minutes
Mixing ratio: 100 : 30 parts by weight resin to hardener, 100 : 35 parts by volume resin to hardener
Order no. 104 095-3 to 104 095-7

Hardener GL 2
Potlife: 210 minutes
Mixing ratio: 100 : 30 parts by weight resin to hardener, 100 : 35 parts by volume resin to hardener
Order no. 104 100-3 to 104 100-7

Hardener CL
Potlife: 60 minutes
Mixing ratio: 100 : 30 parts by weight resin to hardener, 100 : 35 parts by volume resin to hardener
Order no. 109 285-H-3 to 109 285-H-6

Please order hardener separately

under request

Reviews

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
    Cianocrylate->
    Epoxy->
      EMC-Vega
      KAVAN
      Loctite
      Resoltech
      Epoxy BSI
      Epoxy R-G
    Resin/Gelcoat
    Glass Bubbles
    Contact adhesive
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

21x14 BIELA propeller (3-blades) Pusher
89.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	ABS tube 7.0x5.0x1000 mm
3 x	ABS tube 10.0x8.0x1000 mm
1 x	ABS tube 8.0x7.0x1000 mm
2 x	ABS tube 6.0x4.0x1000 mm
3 x	Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm)
1 x	ABS tube 16.0x14.0x1000 mm
1 x	Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm)
1 x	ABS tube 2.0x1.0x1000 mm
1 x	Carbon tube (L 1000 mm, Ø16 mm, Ø12 mm)
1 x	Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm)
2 x	ABS tube 9.0x7.0x1000 mm
2 x	Carbon tube (L 1000 mm, Ø16 mm, Ø14 mm)
2 x	ABS tube 7.0x6.0x1000 mm
1 x	ABS tube 5.0x3.0x1000 mm
1 x	ABS tube 5.0x4.0x156 mm
1 x	ABS tube 9.0x8.0x1000 mm
2 x	Carbon tube (L 1000 mm, Ø18 mm, Ø16 mm)
1 x	Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm)
1 x	ABS tube 4.0x3.0x1000 mm
2 x	Carbon tube (L 1000 mm, Ø2 mm, Ø1 mm)
2 x	Carbon tube (L 1000 mm, Ø22 mm, Ø21 mm)
1 x	ABS tube 4.0x2.0x1000 mm
1 x	ABS tube 3.0x2.0x1000 mm
1 x	ABS tube 8.0x6.0x1000 mm
1 x	ABS tube 20.0x18.0x1000 mm
1 x	ABS tube 18.0x16.0x1000 mm
1 x	ABS tube 6.0x5.0x1000 mm
1 x	U Profile ABS 5,0x10,0x1000 mm
1 x	ABS angle 2,0x2,0x1000 mm
2 x	5 line servos wire black (1 m)
1 x	Silicone 0,50 qmm servos wire Futaba (100 m)
1 x	ABS angle 3,0x3,0x1000 mm
1 x	PVC 0,14 qmm servo wire Futaba (5 m)
2 x	Silicone 0,25 qmm servos wire Graupner (100 m)
3 x	Cable servo PREMIUM 1 m (blanco/rojo/negro) AWG21 + AWG26 TPE
1 x	Profile ABS half cane 3x1000 mm
1 x	Cable servo PREMIUM MAXI 100m (blanco/rojo/azul) PVC
2 x	Green silicone 0,25 qmm wire (50 m)
2 x	ABS angle 1.5x1.5x1000 mm
1 x	White silicone 0,25 qmm wire (150 m)
1 x	JR silicone servo wire 0,35 qmm / 5m
2 x	PVC 0,35 qmm servos wire Graupner (100 m)
1 x	Black silicone 0,25 mm² wire (25 m)
3 x	ABS angle 4,0x4,0x1000 mm
2 x	10m servo "Premium" wire (white/red/blue)
1 x	Profile ABS Square 3 x 1000 mm
1 x	ABS "T" angle 6.0x6.0x1000 mm
2 x	ABS angle 6,0x6,0x1000 mm
3 x	Cable Cargador FUTABA
2 x	Silicone red 0,25 mm² wire (25 m)
2 x	Cabel PVC 2 x 0.25 mm2 (5 m) red-black
1 x	ABS angle 10,0x10,0x1000 mm
1 x	Profile ABS half cane 2.0x1000 mm
3 x	U Profile ABS 2,0x4,0x1000 mm
1 x	Streamline Stainless Steel Tubing 14.5x9.6x1000 mm
2 x	ABS "T" angle 8.0x8.0x1000 mm
1 x	L-Connector 1.0 mm x 1000 mm
3 x	Silicone 0,14 qmm servos wire Graupner (5 m)
2 x	50m servo "Premium" wire (white/red/blue)
3 x	L-Connector 4.0 mm x 1000 mm
2 x	Silicone 0,35 qmm servos wire Futaba (100 m)
1 x	Cable servo PREMIUM MAXI 10m (blanco/rojo/azul) PVC
3 x	T-Connector 4.0 mm x 1000 mm
4 x	PVC 0,14 qmm servos wire Hitec/Mpx (5 m)
1 x	ABS "T" angle 2.0x2.0x1000 mm
1 x	ABS angle 5,0x5,0x1000 mm
1 x	Silicone 0,14 qmm servos wire Graupner (100 m)
1 x	Streamline Stainless Steel Tubing 19.5x9.8x1000 mm
1 x	Profile ABS half cane 2.5x1000 mm
1 x	Streamline Stainless Steel Tubing 7.5x4.5x1000 mm
1 x	White silicone 0,25 mm² wire (25 m)
1 x	Flat Connector 4.0 mm x 1000 mm
1 x	Profile ABS Square 4 x 1000 mm
1 x	U Profile ABS 3,0x6,0x1000 mm
2 x	Cross Connector 4.0 mm x 1000 mm
2 x	Silicone 0,25 qmm servos wire Graupner (5 m)
3 x	Silicone 0,35 qmm servos wire Graupner(100 m)
2 x	Streamline Stainless Steel Tubing 10.5x5.7x1000 m
2 x	Silicone 0,50 qmm servos wire Graupner(100 m)
1 x	Streamline Stainless Steel Tubing 15.5x8.5x1000 mm
1 x	Carbon tube (L 1000 mm, Ø7 mm, Ø5 mm)
2 x	Carbon tube 3K-PW (L 1000 mm, Ø14 mm, Ø12 mm)
1 x	Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm)
1 x	Carbon tube (L 1000 mm, Ø6 mm, Ø4 mm)
1 x	Carbon tube (L 1000 mm, Ø3 mm, Ø2 mm)
1 x	Carbon tube 3K-PW (L 2000 mm, Ø12 mm, Ø10 mm)
1 x	Carbon tube (L 1000 mm, Ø18 mm, Ø15 mm)
1 x	Carbon tube (L 1000 mm, Ø4 mm, Ø2,5 mm)
1 x	Carbon tube (L 1000 mm, Ø14 mm, Ø12 mm)
2 x	Carbon tube 3K-PW (L 1000 mm, Ø19 mm, Ø15 mm)
1 x	Carbon tube 3K-PW (L 2000 mm, Ø14 mm, Ø12 mm)
1 x	Carbon tube 3K-PW (L 2000 mm, Ø20 mm, Ø18 mm)
1 x	Carbon tube 3K (L 1000 mm, Ø 8 mm, Ø 7 mm)
1 x	Carbon tube 3K-Matt (L 1000 mm, Ø25 mm, Ø23 mm)
1 x	Carbon tube (L 2000 mm, Ø16 mm, Ø14 mm)
1 x	Carbon tube 3k-LW (L 2000 mm, Ø30 mm, Ø26 mm)
1 x	M3 Maxi ball link (2 uds)
1 x	Zurich Sport Sunglasse Dark Sensity BROWN Glasses
1 x	Threaded coupler ALU M2 Ø 4 (2 uds)
1 x	Quicklock washer 1.5 mm (10 pcs)
1 x	Carbon fiber rod 6.0 mmx1000 mm
1 x	Carbon fiber rod 7.0 mmx1000 mm
1 x	Extractor piñones 2.3/3.2 mm
1 x	Nylon hinge 15x0,3 (10 pcs)
1 x	10 mm Prop Adapter M12
1 x	Profile ABS half cane 8.0x1000 mm
1 x	3,2 mm Prop Adapter M8
1 x	Profile ABS triangular 4.0x1000 mm 90º
1 x	25,0 mm 3-BL M4 hydro-propeller (rigth hydropropeller)
1 x	2.3 mm Adapter for 30 mm spinners
1 x	Conexion PREMIUM MAXI fuselaje/alas 200 cm one4one
1 x	Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm
1 x	Cable set PREMIUM Maxi, SUB-Done 4three fuselage/wing 200 cm
2 x	XH 30 cm Female extension 0,25 mm2 silicone cable for 3 cell
1 x	10 mm Quick clamp_L (6 pcs)
2 x	Silicone black 0,5 qmm wire ( 25 m)
1 x	Cable servo PREMIUM MAXI 1 m (blanco/rojo/azul) PVC
1 x	Protective Cover for wires Ø 10 mm 1000 mm
2 x	Silicone black 0,75 qmm wire ( 25 m)
2 x	Set cables carga (Mini-JST, JST, XT60, Dean, EC3, TRX, Micro-T,
1 x	Fiberglass heat shield Ø 8 mm 1000 mm
2 x	Silicone red 0,75 qmm wire ( 1 m)
2 x	Silicone black 6,0 qmm wire (25 m)
1 x	Silicone red 4,0 qmm wire (25 m)
2 x	XH 30 cm Female extension 0,25 mm2 silicone cable for 5 cell
1 x	Rubber profile 10-2 mm 2M
1 x	Profile ABS Square 1 x 1000 mm
3 x	PVC 0,08 qmm Futaba servos wire (5 m)
2 x	Cable servo PREMIUM MAXI 50m (blanco/rojo/azul) PVC
1 x	L-Connector 1.5 mm x 1000 mm
1 x	Silicone 0,50 qmm servos wire Graupner(5 m)
1 x	White silicone 0,25 qmm wire (100 m)
3 x	V tail SILENT DREAM 2.200 mm (Elec or Glider)
1 x	Cable with accesories
1 x	Threaded coupler ALU M2,5 Ø 4 (2 uds)
1 x	Threaded coupler ALU Left M2,5 Ø 3 (2 uds)
1 x	Threaded coupler ALU M3 Ø 6 (2 uds)
3 x	Metalic nose for PROJETI
1 x	CF tube (L 1000 mm Ø0,7 mm, Ø0,3 mm)
1 x	Steel tube (L 1000 mm Ø10 mm, Ø9,7 mm)
1 x	ABS tube 5.0x4.0x1000 mm
2 x	1 m servo "Premium" wire (white/red/blue)
1 x	ABS tube 14.0x10.0x1000 mm
1 x	ABS tube 3.0x2.0x330 mm
1 x	Carbon tube (L 1000 mm, Ø10 mm, Ø8 mm)
1 x	ABS tube 3.0x1.0x1000 mm
1 x	Steel tube (L 1000 mm Ø9 mm, Ø8,7 mm)
1 x	Protective Cover for wires Ø 6 mm 1000 mm
1 x	6 mm Quick clamp_S (10 pcs)
1 x	Red silicone 1,0 qmm wire (50 m)
1 x	Protective Cover for wires Ø 20 mm 1000 mm
2 x	Silicone black 2,5 qmm wire ( 1 m)
1 x	Silicon black 2,5 qmm cable ( 25 m)
1 x	Silicone red 4,0 qmm wire ( 1 m)
2 x	Silicone black 0,5 qmm wire ( 1 m)
1 x	XH 30 cm Female extension 0,25 mm2 silicone cable for 2 cell
2 x	Silicone black 1,5 qmm wire ( 1 m)
2 x	Silicone black 0,75 qmm cable ( 1 m)
1 x	PVC 0,08 qmm Graupner servos wire (5 m)
1 x	Silicone red 0,5 qmm wire ( 25 m)
1 x	PVC 0,14 qmm servos wire Graupner (100 m)
1 x	Silicone black 1,0 qmm wire (100 m)
1 x	Protective Cover for wires Ø 15 mm 1000 mm
1 x	Silicone red 1,0 qmm wire ( 1 m)
1 x	Silicone 0,35 qmm servos cable Futaba (5 m)
1 x	Fiberglass heat shield Ø 4 mm 1000 mm
2 x	Silicone black 1,0 qmm wire ( 1 m)
1 x	Protective Cover for wires Ø 3 mm 1000 mm
2 x	Silicone red 0,5 qmm wire ( 1 m)
1 x	Silicone black 1,5 qmm wire ( 25 m)
1 x	Silicone black 6,0 qmm wire ( 1 m)
1 x	Silicon red 1,0 qmm cable ( 25 m)
1 x	Silicone black 4,0 qmm wire ( 1 m)
1 x	Silicone black 1,0 qmm wire ( 25 m)
1 x	Silicone red 2,5 qmm wire ( 1 m)
1 x	Fiberglass heat shield Ø 6 mm 1000 mm
1 x	XH/XH 30 cm Female extension 0,25 mm2 silicone cable for 2 cell
3 x	PVC 0,14 qmm servos wire JR/Graupner (5 m)
1 x	Foil for sticking flaps and ailerons
1 x	SE Ring 250 mm (2 pcs)
1 x	SE Ring 400 mm (2 pcs)
1 x	Steel tube (L 1000 mm Ø5 mm, Ø4,7 mm)
1 x	Ring 320 mm length (5 pcs)
1 x	Cinta Goldfix 1m
1 x	SE Ring 360 mm (2 pcs)
1 x	Waterproof adhesive tape, width 19mm, length 25m
1 x	Tape GFK 50 mm
1 x
1 x	EXTRA 300 78" V3 Yellow/Red/Blue
1 x	ANGEL 48" pp red/blue/white
1 x	38 mm fenders (10 pcs)
1 x	4 mm Prop Adapter M8
2 x	Nose OPTIMA 2.200 mm (Elec or Glider)
1 x	33,0 mm propeller (left propeller)
1 x	Motor mount class 48"
1 x	EDGE 540-A 74" (1880 mm)
1 x	SLICK 103" Red/Yellow/Black ARF (Color 2) 2630 mm
1 x	EXTRA 300 78" V3 Orange/Blue
1 x	Streamline Stainless Steel Tubing 11.5x6.5x1000 m
1 x	Streamline Stainless Steel Tubing 9.0x5.0x1000 mm
2 x	Motor mount VANQUIST 48" F3A
1 x	Motor mount EDGE 540 48"
1 x	PITTS CHALLENGER 87″ 2.20m (120cc) 03 ARF
1 x	VARIO module Hott
1 x	Epoxy 30 min. 200g
1 x	Mudguard wheels 112/127 mm
1 x	Epoxy QUIK-CURE™ 5 min (130g)
1 x	Epoxy 40 min. 4kg (Hardener)
1 x	Epoxy 40 min (Resin). 5 Kg
1 x	Wheel FEMA 127 mm / 6 mm
1 x	45 mm aluminium spinner.
1 x	10 mm gas motor standoff
1 x	A60 Motor Mount Alu complete set
1 x	Frontal support Speed 600
1 x	Cooler motor type 150
1 x	A50 Motor Mount Alu complete set
1 x
1 x	Size "M" motor holder for class 400
1 x	Motor mount M
1 x	Size "M" motor holder for class 600
1 x	Motor mount for 1 m models
1 x	Frontal support Speed 400/480
1 x	DUPLEX 2.4EX MT 300 EX
1 x	DUPLEX 2.4EX MT 125 temperature sensor
1 x	DUPLEX 2.4GHz GPS
1 x	AddCAP 10AS capacitors
1 x	Silicone black 4,0 qmm wire (25 m)
1 x	Straightened rod Ø 3.0 mm x 1000 mm
1 x	Receiver FUTABA R7108SB FASSTest/FASST
1 x	Receiver R6008HV-A comatible FUTABA
1 x	Fibra de vidrio 80 g/m² (10 m x 100 cm)
1 x	ABS "T" angle 10.0x10.0x1000 mm
1 x	Fiberglass 163 g/m² 1m x 5 m (Twill)
1 x	75 mm spinner (Carbon Imitation)
1 x	Metal ring front FEMA
1 x	Epoxy 40 min (Hardener). 10Kg
1 x	Epoxy Resin L + Hardener L (40 min) 240g (200g Resin L + 40g Har
1 x	Epoxy Resin L + Hardener LT kit/ 3125g
1 x	VBar Control RX-Satellite
1 x	Servo holder for retract
1 x	Compact on-board starting system (9525)
1 x	57 mm aluminium spinner.
1 x	38 mm aluminium spinner.
1 x	50 mm aluminium spinner (Kavan)
1 x	102 mm aluminium spinner
1 x	Fan for A60
2 x
1 x	Powerset FunJet 2 with Vectorcontrol unit
1 x	Motor OS 3820-1200 electric
1 x	Frontal support Speed 280
1 x	Cooler motor type 280
1 x	White gelcoat 1 Kg
1 x	Fiberglass 25 g/m² 5000x1270 mm
1 x	Glass fabric 49 g/m² (Finish FE 800, plain) 110 cm x 20m
1 x	Glass fabric 49 g/m² (1,27 x 10 m)
1 x	Fibra de vidrio 80 g/m² (3 m x 100 cm)
1 x	Wheel FEMA 165 mm / 8 mm
1 x	Compact on-board starting system (9715)
1 x	Foaming agent for epoxy resins 200 g
1 x	Receiver GRAUPNER GR-12 HoTT
1 x	Retract undercarriage for gliders 12-25 Kg 2-2.8 (without wheel)
1 x	Wheel FEMA 70 mm / 5 mm
1 x	Compact on-board starting system (9713)
1 x	Landing gear axle Ø 6 mm (2 uds)

14,823.06EUR