Top » Catalog » Hardware » Adhesives/Resin/Epoxy » Epoxy » Epoxy R-G » R1001102

80.00EUR

Epoxy Resin L + Hardener L (40 min) 3.5 Kg (2.5 kg Resin L + 1 k
[R1001102]

Epoxy Resin L and Hardener L 40 min. (3.5 Kg) 2,5 kg Resina / 1 kg Hardener

The resin system Epoxy Resin L + Hardener L yields superior impregnating and wetting properties towards carbon, glass, aramid and natural fibres.

Low viscosity
Highly transparent
High degree of UV stability
Tack-free curing even of thin layers
Glass transition temperature (Tg) max. 76 °C (post-curing at 60 °C / 15 h)
High static and dynamic strength
Free of nonylphenol and DETA
Processing time: 40 minutes (100 g / 20 °C)
Mixing ratio:
100 : 40 parts by weight resin : hardener
100 : 45 parts by volume resin : hardener
It exhibits a very good price/performance ratio and is suitable for the following processing procedures:
Hand laminating
Vacuum moulding
Press moulding
Expertise for the resin system Epoxy Resin L + Hardener L: this system is not cytotoxic (cell damaging), important for applications in medical purposes.
Mechanical properties (Neat resin after curing)
Flexural test
Flexural strength (DIN EN ISO 178): 111 MPa
Flexural modulus (DIN EN ISO 178): 2.960 MPa
Tensile test
Tensile strength (DIN EN ISO 527): 69 MPa
Elongation at break: 4.7 %
Compression test
Compressive strength (DIN EN ISO 1426): 91 MPa
PoxySystems® is a registered trademark of R&G
General information about the system "Epoxy Resin L" with Hardeners S, L, CL, EPH 500, EPH 161, W 300, GL 1 and GL 2
* Low viscosity, free of solvents and fillers
* Fast impregnation of glass, aramid, carbon and natural fibres
* High static and dynamic strength (GL approval with the Hardeners GL 1 and GL 2 being present

Epoxy Resin L with the corresponding Hardeners S, L, CL, EPH 500, EPH 161, W 300, GL 1 and GL 2 is the most commonly used laminating and adhesive resin in R&G`s delivery programme.

In conjunction with the Hardeners S (15 minutes), L (40 minutes), CL (60 minutes), EPH 500 (60 minutes), EPH 161 (90 minutes), W 300 (300 minutes), GL 1 (30 minutes) and GL 2 (210 minutes), this epoxy resin exhibits similar mechanical properties to those of the laminating systems usual aerospace .Its heat deflection temperature reaches from 60 °C (S, L, EPH 500, W 300), to 80 °C (GL 1 and GL 2, after post-curing), to 95 °C (CL, after post-curing) and finally to 120 °C (EPH 161, after post-curing).

Its low surface tension, good adhesion, and minimal curing shrinkage makes the Epoxy Resin L ideal for bonding wood, metal, foamed polystyrene like Styropor® etc. It can be processed in all of the customary methods, e.g. hand lay-up, pressure and vacuum impregnation, press moulding and filament winding.

under request

Reviews

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
    Cianocrylate->
    Epoxy->
      EMC-Vega
      KAVAN
      Loctite
      Resoltech
      Epoxy BSI
      Epoxy R-G
    Resin/Gelcoat
    Glass Bubbles
    Contact adhesive
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

P-47 Thunderbird Silver
3,300.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	14x60 mm Mini rings Tie Wraps (4 pcs)
1 x	Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
1 x	Tape GFK 38 mm
1 x	Hexagonal ball head 2.0 x 50 mm
1 x	PROXXON - SANDING BELTS FOR BSL 220/E 120 GRIT (5 pcs)
1 x	Round Rod 6,0x1000 mm
1 x	ABS Strip 1.5x8.0x1000 mm
1 x	ABS Strip 1.5x2.0x1000 mm
1 x	3 blades set
1 x	Head runner
1 x	Foil for sticking flaps and ailerons
1 x	SE Ring 400 mm (2 pcs)
1 x	Round Rod 1,0x1000 mm
1 x	2,5x60 mm allen screwdriver
1 x	4,8x1000 mm 2:1 red termoretract tube
1 x	68 mm PVC transparent battery termo-retract 68 mm (1 m)
1 x	Oracover Black 10 m
1 x	12.7 mm 2:1 black termoretract tube
1 x	MYLAR film A350 (1000x500 mm)
1 x	Sun Cover PC 21 XXL (JMB Jets)
1 x	12,7x1000 mm 2:1 green termoretract tube
1 x	Extension silicon 35 cm male (Futaba)
1 x	ABS tube 9.0x8.0x1000 mm
1 x	115x29 mm (4.50") Type jets aluminium core wheel
1 x	Extension lead 15 cm Multiplex
1 x	Extension silicon 100 cm (Futaba)
1 x	20 g tin paste
1 x	Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m
1 x	ABS tube 4.0x2.0x1000 mm
1 x	Duralumium F3A horn 30x10x23,5 mm (2 pcs)
1 x	Extension silicon 30 cm female (Futaba)
1 x	Horn 5/20 with M2 Bearing
1 x	Horn for flap control (1 pcs)
1 x	Horn 13,5x16 mm (2 pcs)
1 x	5 mm M2 variable inclined horn
1 x	Circlick securite
1 x	Spannlack 1000 ml
1 x	1/6 Pilot "Garry"
1 x	18m Fitting barb
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs)
1 x	Adjustable brass horn threaded M3
1 x	101x28 mm (4.0") Type jets aluminium core wheel
1 x	Cable with accesories
1 x	Carbon fabric 68 g/m² (style 493 aero, plain weave) 100 cm
1 x	Carbon tube (L 1000 mm, Ø16 mm, Ø14 mm)
1 x	Straightened rod Ø 5.0 mm x 1000 mm
1 x	Cable tie mounts 4.3 (4 uds)
1 x	Epoxy Resin L + Hardener GL 1 (30 min)
1 x	Aluminum Bayonet / strongal D25 mm / 1 m
1 x	Tube support Ø 6mm (10 pcs)
1 x	APM2.6 Power module with 5.3V DC BEC
1 x	Straightened rod Ø 4.0 mm x 1000 mm
1 x	Straightened rod Ø 1.5 mm x 1000 mm
1 x	Epoxy 5 min. 200g
1 x	Tapa estado carga XT-60 (6 pcs)
1 x	3 copper lacquer wire Ø0,2 mm (1 m)
1 x	BEC 3A FOXY
1 x	Nylon hinge for flaps 33x9 (2 pcs)
1 x	Pilot "Duke" Legends Series (Slimline)
1 x	Brass rod Ø 1.5 mm x 1000 mm
1 x	1/7 Pilot "Japanese"
1 x	Strip ABS 2.0x8.0x1000 mm
1 x	LA500 Blades
1 x	Starter EM Gear Power 250
1 x	Cinta Goldfix 1m
1 x	Ball joint long
1 x	Hot Glue Stick RED
1 x	Strip 2,5x1,25x330 mm
1 x	Dust collector for mould cleaning
1 x	3,0x60 mm allen screwdriver
1 x	5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	Strip 2,0x2,0x330 mm
1 x	Monokote BLANCO jet (1.8x0.65m)
1 x	2,4x1000 mm 2:1 black termoretract tube
1 x	6,4x1000 mm 2:1 black termoretract tube
1 x	Monokote BLUE metalizado (1.8x0.65m)
1 x	Suncover 100cc Red
1 x	Cable silicona macho batt. receptor 30 cm (Graupner)
1 x	Extension silicon 10 cm (Futaba)
1 x	280 cc gasoline fuel tank complet
1 x	6 mm M3 variable horn
1 x	Extra long horn 60x30
1 x	Zurich Sport Sunglasse Dark Sensity BROWN Glasses
2 x
1 x	Glases Nimbus "Black"
1 x	Extension silicon 10 cm (Graupner)
1 x	Carbon Fiber TeXtreme® 80 g/m² (plain) 100 cm, roll/ 10 m
1 x	Buy Perforated film 100 cm / 10 m
1 x	110x55 mm C SLH KOVO wheel
1 x	ABS tube 12.0x10.0x1000 mm
1 x	Premium servo extension 100cm
1 x	Cabel "Y" 30 cm (graupner)
1 x	6 mm red aluminium threaded horn with patella
1 x	Futaba Female 40 cm extension
1 x	Epoxy Resin L + Hardener GL2, kit/ 930 g
1 x	Pin hinge 34x16 mm (10 uds)
1 x	45 mm rods set for direction control
1 x	CellPRO 4S Adaptader (GP/KO up to 4S)
1 x	Clip fixing for wing (2 pcs)
1 x	Nylon hinge 15x0,3 (10 pcs)
1 x	Brass hexagonal rod Ø 5 mm x 1000 mm
1 x	Piloto jet 130 mm
1 x	Mixing tube for double syringes and cartridges (MR 1:1 and 2:1)
1 x	48 mm cylidric hinge Ø 2,5 mm (5 pcs)
1 x	Epoxy adhesivo Elan-tech ADH 981.892 50ml (dark grey)
1 x	Allen wheel collar M3x3
1 x	Civilian pilot "Pamela" size 9cm (Slimline)
1 x	Long pinned hinge (6 uds)
1 x	Civilian pilot "G-Man" size 9cm (Slimline)
1 x	11 mm Rubber pads (14 pcs)
1 x	Beech dowels 10 mm x 1000 mm
1 x	ABS Strip 1.0x2.0x1000 mm
1 x	Fuselage Autogyro RAINBOW
1 x	ABS Strip 1.5x4.0x1000 mm
1 x	ABS Strip 1.0x3.0x1000 mm
1 x	LA500 housing-lower cyclic
1 x	Strip ABS 2.0x10.0x1000 mm
1 x	20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	Round Rod 3,0x1000 mm
1 x	SE Ring 250 mm (2 pcs)
1 x	Ring 320 mm length (5 pcs)
1 x	PROXXON - SANDING BELTS FOR BSL 220/E 80 GRIT (5 pcs)
1 x	Stickers-digit for marking
1 x	LA500 rotor head shaft
1 x	Vacuum pump 12 CFM
1 x	Epoxy 5min KAVAN 2x 100g
1 x	Battery plate
1 x	Copier 2x20 cm pcs
1 x	13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	ABS I Strip 10x5x1000 mm
1 x	Blade Holder Full (3 blades)
1 x	Blades 330mm
1 x	Round Rod 1,25x1000 mm
1 x	Starter EM Gear Power 80
1 x	Blade holder center
1 x	Head lower part New
1 x	Tail tube RAINBOW
1 x	Strip 1,5x1,5x330 mm
1 x	20x200 mm battery rings
1 x	Ball Link Plier
1 x	Head upper part
1 x	26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	SE Ring HACKER 300 mm (2 pcs)
1 x	Starter Sullivan-STAR 601
1 x	Screwdriver for Hexagon 1,5mm
1 x	4 blades set
1 x	Head lower part
1 x	Digital precision scale up to 2000 g
1 x	Cierva C30 spanish decoration Stickers
1 x	20x1000 mm Ring Strap Back To Back
1 x	6,4x1000 mm 2:1 red termoretract tube
1 x	1,6x1000 mm 2:1 black termoretract tube
1 x	1,6x1000 mm 2:1 red termoretract tube
1 x	4,8x1000 mm 2:1 black termoretract tube
1 x	Oracover Azul 2 m
1 x	3,2x1000 mm 2:1 black termoretract tube
1 x	135 mm PVC transparent battery termo-retract 68 mm (1 m)
1 x	1,2x1000 mm 2:1 black termoretract tube
1 x	1,2x1000 mm 2:1 red termoretract tube
1 x	165 mm PVC transparent battery termo-retract 165 mm (1 m)
1 x	Monokote ROJO misil (1.8x0.65m)
1 x	6,4x1000 mm 2:1 blue termoretract tube
1 x	Oracover CHROME 2m
1 x	4,8x1000 mm 2:1 blue termoretract tube
1 x	ORACOVER Ferrari red (2 m)
1 x	Sun Cover ULTIMATUM 2.0 (Hispano Aviacion)
1 x	Oracover Black 2 m
1 x	Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m
1 x	Silicone adhesive ELASTOSIL® E4, tube/ 90 ml
1 x	1/6 Pilot "Cindy"
1 x	Extension silicon 30 cm male (Futaba)
1 x	Extension silicon 75 cm (Futaba)
1 x	Horn micro type4 Ø 0,5 (2 pcs)
1 x
1 x	SIMtransmitter 6 Mode 2
1 x	Horn DU-BRO 1/2 (2 pcs)
1 x	Brass control horn M4 short for wire (10pcs)
2 x	200 mm extensión servo HITEC/JR
1 x	Horn 20x28,5 mm (2 pcs)
1 x	Extension silicon 100 cm (Graupner)
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m
1 x	Solvent Plasti Dip 1000 ml
1 x	Extension 7.5 cm
1 x	Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm)
1 x	170x54 mm SLH KOVO wheel with bearing and metal hub
1 x	ABS tube 8.0x6.0x1000 mm
1 x	Extension 15 cm (Futaba)
1 x	Universal Colour Paste deep black 50 g
1 x	ABS 500 x 400 x 1 mm (white)
1 x	Brass control horn M2 short for wire (2 pcs)
1 x	Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m
1 x	Carbon fibre sandwich sheet 350x150x3 mm
1 x	Painting GHT Lexan Black 150 ml
1 x	Buy Perforated film 100 cm / 50 m
1 x	1/6 Pilot "John"
1 x	Horn mando small (2 pcs)
1 x	Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm)
1 x	Cap Hispano Aviación
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m
1 x	ABS tube 10.0x8.0x1000 mm
1 x	Glases Flitemaster
1 x	Extension 90 cm (Futaba)
1 x	ABS tube 3.0x1.0x1000 mm
1 x	Horn DUBRO 1/2A
1 x	Spray Graphit 33
1 x	Breatex™ Non-woven absorber 150 g/m² Roll 50m
1 x	Buy Perforated film 145 cm / 50 m
1 x	25 mm carbon servo arm
1 x	Paint gun for sprays
1 x	Horn 6/20 with M3 Bearing
1 x	Extension silicon 35 cm (Futaba)
1 x	Breatex™ Non-woven absorber 150 g/m² Roll 100m
1 x	ABS tube 5.0x4.0x1000 mm
1 x	1/6 Pilot "Tony"
1 x	1/4 Pilot "Heidi"
1 x	22m Fitting barb
1 x	100x50 mm SLH KOVO wheel
1 x	Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm)
1 x	ABS tube 7.0x5.0x1000 mm
1 x	ABS tube 3.0x2.0x330 mm
1 x	127x43 Ø6.0 mm aluminium core wheel
1 x	ABS tube 2.0x1.0x1000 mm
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs)
1 x	Vest clothes Hispano Aviación
1 x	Carbon fibre tube -TAPERED- 3k-PW (10 x 5 x 0.3) x 880 mm
1 x	Interface Jack Adapter IKARUS
1 x	Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m
1 x	Presto SF Light Filler styrene-free (420 g)
1 x	ABS tube 4.0x3.0x1000 mm
1 x	Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm)
1 x	1/10 Pilot "Jack"
1 x	Universal Colour Paste white 50 g
1 x	Plasti Dip Liquid Tape 429 ml black
1 x	1/10 Pilot "Jimmy"
1 x	Carbon tube (L 1000 mm, Ø10 mm, Ø8 mm)
1 x	Brass control horn M4 short for wire (4 pcs)
1 x	Buy Perforated film 100 cm / 20 m
1 x	120x60 mm C SLH KOVO wheel
1 x	EasyFLY Addon
1 x	ABS tube 3.0x2.0x1000 mm
1 x	Extension silicon 50 cm (Futaba)
1 x	Cable S.BUS 3 salidas 300 mm
1 x	6 mm M3 variable inclined horn
1 x	Futaba male 40 cm extension
1 x	Horn 5/15 with M2 Bearing
1 x	Jeti Black cap
1 x	Extra-long adjustable aluminium control horn 2,8x34
1 x	ABS tube 5.0x4.0x156 mm
1 x	Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m
1 x	Partall paste 650 g
1 x	Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm)
1 x	Aluminium sheet 500x250x0,5mm
1 x	Brass control horn M2 large for wire (2pcs)
1 x	Battery charging cable XT60
1 x	Support pumb/filter Xicoy X45
1 x	100 mm rods set for direction control
1 x	Nylon hinge for flaps/gates 27x10,5 (2 pcs)
1 x	15 mm reinforced hinge
1 x	Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
1 x	Gates hinge
1 x	Vasa model Catapult
1 x	Straightened rod Ø 4.5 mm x 1000 mm
1 x	Pilot "Dick" Legends Series (Slimline)
1 x	Black copper lacquer wire Ø0,2 mm (5 m)
1 x	CC 05
1 x	80 mm rods set for direction control
1 x	48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs)
1 x	1/4 Pilot "Mike"
1 x	100 mm rods + T patellas set for direction control
1 x	Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm
1 x	Circlick securite
1 x	Epoxy Resin L + Hardener L (40 min) 240g (200g Resin L + 40g Har
1 x	25 mm reinforced hinge

6,756.99EUR