36.16EUR

Epoxy Casting Resin + Hardener "water-clear" (300 min)
[R1071023]


Epoxy Casting Resin + Hardener "water-clear" (300 min)

General information about the System Epoxy Casting Resin + Hardener "water-clear):
Two-component clear, colourless epoxy system.
The following properties distinguish it from the predecessor EP cast resin “crystal clear”:
Excellent UV resistance for epoxy resins*)
Supertransparent constituents
Polishable, hard surface
Excellent impact strength
Completely tackfree curing even in thin coats
Ideal for transparent coatings
Also suitable as a laminating resin system with a very long pot life
The system's reactivity was raised for smaller initial and casting quantities. An initial batch size of 400 g can be cast per mould without the surface collapsing. Casting thicknesses up to 40 mm are possible with larger initial quantities.

Like all reactive resin systems the casting quantity is limited by the generated reaction heat (exothermal reaction): often a lower curing temperature (e.g. at an ambient night temperature lower than 20 °C) can counteract too great an exothermal reaction.

Pot life : approx. 300 minutes

Mixing ratio:
100 : 37 parts by weight of resin to hardener
100 : 47 parts by volume of resin to hardener

Curing time: approx. 24–48 h

Processing:
Resin and hardener are homogenised for about two minutes at room temperature (23 °C). Afterwards the mixture is left to rest for approx. 20 minutes.
Leave the ready mixture on a flat surface for 48 hours. Please do not mix or otherwise move the product. The total curing time ranges from 24 to 48 hours.
Expertise for the resin system casting resin + hardener "water-clear": this system is not cytotoxic (cell damaging), important for applications in medical purposes!
*) This system has very good UV resistance for EP resins, but, like all epoxy resins, it can turn more or less yellow over time under high UV exposure. Therefore only conditionally suitable for outdoor applications or permanent exposure to artificial light sources.
Typical areas of application: Indoor: railway models, works of art, stage decorations, etc. (only occasionally exposed to UV sources).


temporarily out of stock
temporarily out of stock

Reviews
Categories
* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
  
  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
    Cianocrylate->
    Epoxy->
      EMC-Vega
      KAVAN
      Loctite
      Resoltech
      Epoxy BSI
      Epoxy R-G
    Resin/Gelcoat
    Glass Bubbles
    Contact adhesive
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Jeti Black cap
1 x Conector AS150 7mm antichispazo (Set: 2 pares)
1 x Conector XT-30 (hembra)
2 x A/C quality beech plywood 600x300x8.0 mm
1 x Conector XT-30 (macho)
2 x BALSA trip 3.0x3.0x1000 mm
1 x Conector JR/Uni Servo male BLUE silicon (10 pcs)
1 x Conector JR Servo female (10 pcs)
1 x Connectors banna oro 0,8 mm (M/F)
1 x BALSA trip 5.0x5.0x1000 mm
1 x Balsa panel 2.5x100x1000 mm
1 x A/C quality beech plywood 600x300x0.8 mm
1 x Conector JAPAN G2 Set 5 pares
1 x BALSA trip 8.0x8.0x1000 mm
1 x Conector MT-60 (pair)
1 x Conector JR Servo female (10 pcs)
1 x 30 cm DEANS female connector
1 x Balsa panel 1.5x100x1000 mm
1 x Beech dowels 2.0 x 1000 mm
1 x A/C quality beech plywood 600x300x5.0 mm
3 x BALSA triangular 15x15x1000 mm
1 x Connectors banna oro 2 mm (M/F)
1 x A/C quality beech plywood BIRCH 600x300x1.0 mm
1 x BALSA triangular 10x10x1000 mm
1 x Conector JR/Uni Servo female BLUE silicon (10 pcs)
1 x BALSA trip 6.0x6.0x1000 mm
1 x 2 mm female connector (2 pcs) with safety connector
1 x BALSA triangular 8x8x1000 mm
1 x Conector BEC male (10 pcs)
2 x Balsa panel 10x100x1000 mm
1 x A/C quality beech plywood 600x300x0.6 mm
2 x Balsa panel 3.0x100x1000 mm
1 x Ball link V1 Ø7 M4/3 (6 uds)
1 x 26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x Aluminium alloy coupler for carbon tube 6/M4
1 x Copier 2x20 cm pcs
1 x Liston HAYA 8 x 8 x 1000 mm
2 x BALSA triangular 6x6x1000 mm
1 x A/C economy plywood 600x300x6+.0 mm
1 x XH male balance (9S) connector (2 pcs)
1 x Linden wood slat 3.0x3.0x1000 mm
2 x XH female balance (5S) connector (2 pcs)
1 x A/C quality beech plywood 600x300x5.0 mm
1 x XH female balance (9S) connector (2 pcs)
1 x A/C quality beech plywood 600x300x6.0 mm
3 x BALSA trip 10x10x1000 mm
2 x BALSA trip 3.0x5.0x1000 mm
1 x Liston HAYA 3 x 10 x 1000 mm
1 x Pine wood slat 6.0x6.0x1000 mm
1 x Balsa panel 6.0x100x1000 mm
1 x Soldering PCBs 8pin, 5 pieces
2 x XH female balance (4S) connector (2 pcs)
1 x A/C quality beech plywood 1520x750x4.0 mm
1 x A/C quality beech plywood 600x300x0.8 mm
2 x XH female balance (3S) connector (2 pcs)
1 x Balsa panel 4.0x100x1000 mm
1 x Trailing edge BALSA 35x8x1000 mm
1 x XH male balance (3S) connector (2 pcs)
2 x Beech dowels 10 mm x 1000 mm
2 x XT-90 connector (pair)
1 x Conector MR-60 (pareja)
1 x Ø 1,6 mm pin for Kwik link MPJ2150/2157 (6 pcs)
1 x Metal clevis M2 (10 uds)
1 x Servo Arm 25T M3 KAVAN 6.5 / 19.6 mm
1 x Servo GO-1081 MG 45 kg.cm 0.085s/60º
1 x Bateria DJI Mini 2 2250 mAh
1 x Kwik link with arm M3xM2xL24
1 x Black large kwik link (10 pcs)
1 x Pulley brass 16/2 (2 pcs)
1 x Pulley brass 10/2 (2 pcs)
1 x Kwik link aluminio M3 L: 30mm (6 uds) pin Ø 2 mm
1 x Pulley brass 12/2 (2 pcs)
1 x White large kwik link (10 pcs)
1 x Kwik link aluminio M3 L:30mm (6 uds) pinØ1.6mm Left
1 x Metal ball clevis M3 (10 uds)
1 x Pulley brass 14/2 (2 pcs)
1 x Kwik link aluminio IZD. M3 L: 30mm (2 uds) pin Ø 2 mm
1 x Servo Robbe FS 525 BB MG HV
1 x 10-15mm Servo Arm
1 x Servo GO-02 Digital 1.8g
1 x Servo KST X20-7512 V8.0 82kg 8.4v
1 x Servo KST BLS825 V8.0 HV 35Kg 8.4v
1 x Futaba BLS152 - Upper Case
1 x Servo FUTABA BLS 272SV
1 x Battery RX JETI LiIon RB 2600 7.2v
1 x Servo HBS 690BB HV Digital
1 x PPM to Jack link - Tx Black (mono) DC/DS Tx DUPLEX 2,4EX
1 x Servo BMS-4112
1 x Servo FUTABA BLS 276SV
1 x Caps multicolor Switch JETI
1 x XH male balance (2S) connector (2 pcs)
1 x Gear for D 200 BX
1 x XH male balance (6S) connector (2 pcs)
1 x XH male balance (7S) connector (2 pcs)
1 x Wing connector 8pin with pin strip, plug & socket
1 x XT60 Connector with Holder Male 2pcs
1 x Walnut wood slat 2.0x2.0x1000 mm
1 x Pine wood slat 5.0x5.0x1000 mm
1 x BALSA leading edge 8x10x1000 mm
1 x Pine wood slat 10x10x1000 mm
1 x Pine wood slat 3.0x5.0x1000 mm
1 x OBECHI sheet 2.0x3.0x1000 mm
1 x Servoholder Dymond DS 1800 MG Digital (2 pcs)
1 x Pine wood slat 1.5x3.0x1000 mm
1 x DPSI Micro - RCS
1 x Epoxy QUIK-CURE™ 5 min (260g)
1 x Epoxy QUIK-CURE™ 5 min (130g)
1 x Epoxy Resin L + Hardener L (40 min) 240g (200g Resin L + 40g Har
1,709.69EUR
Manufacturers
Manufacturer Info
R-G.de
R-G.de Homepage
Other products
Languages
Español English
Currencies