36.16EUR

Epoxy Casting Resin + Hardener "water-clear" (300 min)
[R1071023]


Epoxy Casting Resin + Hardener "water-clear" (300 min)

General information about the System Epoxy Casting Resin + Hardener "water-clear):
Two-component clear, colourless epoxy system.
The following properties distinguish it from the predecessor EP cast resin “crystal clear”:
Excellent UV resistance for epoxy resins*)
Supertransparent constituents
Polishable, hard surface
Excellent impact strength
Completely tackfree curing even in thin coats
Ideal for transparent coatings
Also suitable as a laminating resin system with a very long pot life
The system's reactivity was raised for smaller initial and casting quantities. An initial batch size of 400 g can be cast per mould without the surface collapsing. Casting thicknesses up to 40 mm are possible with larger initial quantities.

Like all reactive resin systems the casting quantity is limited by the generated reaction heat (exothermal reaction): often a lower curing temperature (e.g. at an ambient night temperature lower than 20 °C) can counteract too great an exothermal reaction.

Pot life : approx. 300 minutes

Mixing ratio:
100 : 37 parts by weight of resin to hardener
100 : 47 parts by volume of resin to hardener

Curing time: approx. 24–48 h

Processing:
Resin and hardener are homogenised for about two minutes at room temperature (23 °C). Afterwards the mixture is left to rest for approx. 20 minutes.
Leave the ready mixture on a flat surface for 48 hours. Please do not mix or otherwise move the product. The total curing time ranges from 24 to 48 hours.
Expertise for the resin system casting resin + hardener "water-clear": this system is not cytotoxic (cell damaging), important for applications in medical purposes!
*) This system has very good UV resistance for EP resins, but, like all epoxy resins, it can turn more or less yellow over time under high UV exposure. Therefore only conditionally suitable for outdoor applications or permanent exposure to artificial light sources.
Typical areas of application: Indoor: railway models, works of art, stage decorations, etc. (only occasionally exposed to UV sources).


temporarily out of stock
temporarily out of stock

Reviews
Categories
* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
  
  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
    Cianocrylate->
    Epoxy->
      EMC-Vega
      KAVAN
      Loctite
      Resoltech
      Epoxy BSI
      Epoxy R-G
    Resin/Gelcoat
    Glass Bubbles
    Contact adhesive
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x X-RAY Micro QR (Rudder)
1 x X-RAY Micro QR (Fuselage with canopy)
1 x X-RAY Micro QR (Elevator)
1 x Ion Pro NG electric with flaps GREEN Fluor (JP Model)
1 x Surprise XII Rudder (Freudenthaler)
1 x Wings Bags JEEMO
3 x Tail boom brace LOGO 480
1 x VBar Control Touch, midnight black
1 x LA500 housing-lower cyclic
1 x Piñon motor rotor LA-500
1 x Pilot LA 500
1 x LA500 front gear holder
1 x Brass hexagonal rod Ø 4 mm x 1000 mm
1 x Baal link 4/14/4 (5 pcs)
1 x Straightened rod Ø 4.0 mm x 1000 mm
2 x Straightened rod Ø 1.0 mm x 1000 mm
2 x Brass hexagonal rod Ø 5 mm x 1000 mm
2 x Brass rod Ø 1.0 mm x 1000 mm
1 x LA500 Blades
1 x Motor rotor LA-500
1 x Ball Link M2 with Ball and Hardware, 10 pcs
1 x BETA 1400 RTF Red
1 x Glider retract undercarriage 8-16 Kg 2.5-3.2(without wheel) 140m
1 x Pin hinge 34x16 mm (10 uds)
1 x Sprung retractable undercarriage (Alfa model)
1 x Glider retract undercarriage 8-16 Kg 2.5-3.2(140 mm wheel with b
1 x Retract undercarriage for gliders 12-25 Kg 2-2.8 (without wheel)
1 x BETA 1400 ARF Red
1 x Ciano KAVAN Medium 20g
1 x Retract undercarriage
1 x Fuel bottle 500 ccm
2 x Battery LiPo GRE18 600 mAh 7.4v
1 x Propeller APC 10x6 Electric Pusher
1 x XICOY X45 rail
1 x Jeemo Dolly
1 x Tail gear set (60-120 class)
1 x Tail wheel for 8-12 kg models
1 x Straightened rod Ø 2.5 mm x 1000 mm
1 x Brass hexagonal rod Ø 3 mm x 1000 mm
1 x Brass hexagonal rod Ø 3.5 mm x 1000 mm
1 x Straightened rod Ø 0.5 mm x 1000 mm
1 x Aluminium rod Ø 4.0 mm x 3000 mm
1 x Propeller APC 10x6 Electric
1 x Propeller APC 10x4.7 SF Pusher
1 x Propeller APC 14x12 Electric
1 x Propeller APC 11x4.5 Electric Pusher
1 x Propeller APC 12x6 SF
1 x Propeller APC 13x6.5 Electric Pusher
1 x Sandwich carbon + poplar 4mm + carbon 480x290 mm
1 x Logo 400 SE VBar
1 x Straightened rod Ø 6.0 mm x 1000 mm
1 x Straightened rod Ø 8.0 mm x 1000 mm
1 x Straightened rod Ø 0.8 mm x 1000 mm
1 x Straightened rod Ø 2.0 mm x 1000 mm
1 x Straightened rod Ø 14.0 mm x 1000 mm
1 x Brass rod Ø 1.5 mm x 1000 mm
3 x Epoxy L 40 min. (1 Kg) 715g Resina / 285g Hardener S (15 min)
1 x Combo KAVAN PRO 3536-1000 + RAY 40 SB
1 x Ciano KAVAN Super Thin 20g
1 x Brazo servo KAVAN doble aluminio 25T - 2.5" M3
1 x 
1 x Mini VISION "spread tow" CFK
1 x Straightened rod Ø 7.0 mm x 1000 mm
1 x Epoxy 30 min. 200g
1 x Foaming agent for epoxy resins 200 g
1 x Epoxy 40 min (Resin). 5 Kg
1 x Epoxy 5 min. 200g
1 x Epoxy 40 min (Hardener). 1 Kg
1 x Epoxy Resin L + Hardener L (40 min) 240g (200g Resin L + 40g Har
1 x THERMIK XL 4000 mm
1 x Adaptadores carga 6s JST-XH
1 x Combo KAVAN C3536-1250 + KAVANA R50SB +
1 x VAGABOND 1500 mm ARF V2 (Blue)
1 x TAKEO 3.6m electric
1 x Epoxy Resin L + Hardener L (40 min) 1Kg (715g Resin L + 285g Har
1 x Epoxy 40 min (Resin). 25Kg
1 x Epoxy Resin L + Hardener GL2, kit/ 930 g
1 x Epoxy 40 min (Hardener). 10Kg
1 x Epoxy Resin L + Hardener LT kit/ 3125g
1 x Epoxy L 40 min. 10 kg (Resin)
1 x Epoxy 5 min. 500 g (Hardener)
1 x Epoxy Resin L + Hardener LT kit/ 895g
1 x Epoxy 40 min. 4kg (Hardener)
8,218.51EUR
Manufacturers
Manufacturer Info
R-G.de
R-G.de Homepage
Other products
Languages
Español English
Currencies