36.16EUR

Epoxy Casting Resin + Hardener "water-clear" (300 min)
[R1071023]


Epoxy Casting Resin + Hardener "water-clear" (300 min)

General information about the System Epoxy Casting Resin + Hardener "water-clear):
Two-component clear, colourless epoxy system.
The following properties distinguish it from the predecessor EP cast resin “crystal clear”:
Excellent UV resistance for epoxy resins*)
Supertransparent constituents
Polishable, hard surface
Excellent impact strength
Completely tackfree curing even in thin coats
Ideal for transparent coatings
Also suitable as a laminating resin system with a very long pot life
The system's reactivity was raised for smaller initial and casting quantities. An initial batch size of 400 g can be cast per mould without the surface collapsing. Casting thicknesses up to 40 mm are possible with larger initial quantities.

Like all reactive resin systems the casting quantity is limited by the generated reaction heat (exothermal reaction): often a lower curing temperature (e.g. at an ambient night temperature lower than 20 °C) can counteract too great an exothermal reaction.

Pot life : approx. 300 minutes

Mixing ratio:
100 : 37 parts by weight of resin to hardener
100 : 47 parts by volume of resin to hardener

Curing time: approx. 24–48 h

Processing:
Resin and hardener are homogenised for about two minutes at room temperature (23 °C). Afterwards the mixture is left to rest for approx. 20 minutes.
Leave the ready mixture on a flat surface for 48 hours. Please do not mix or otherwise move the product. The total curing time ranges from 24 to 48 hours.
Expertise for the resin system casting resin + hardener "water-clear": this system is not cytotoxic (cell damaging), important for applications in medical purposes!
*) This system has very good UV resistance for EP resins, but, like all epoxy resins, it can turn more or less yellow over time under high UV exposure. Therefore only conditionally suitable for outdoor applications or permanent exposure to artificial light sources.
Typical areas of application: Indoor: railway models, works of art, stage decorations, etc. (only occasionally exposed to UV sources).


temporarily out of stock
temporarily out of stock

Reviews
Categories
* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
  
  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
    Cianocrylate->
    Epoxy->
      EMC-Vega
      KAVAN
      Loctite
      Resoltech
      Epoxy BSI
      Epoxy R-G
    Resin/Gelcoat
    Glass Bubbles
    Contact adhesive
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Propeller MEJZLIK 9,5x3 SF Carbon Indoor
1 x Propeller MEJZLIK 20x13 Electric light (41 g)
1 x Propeller MEJZLIK 20x10 Electric light (36 g)
2 x PropCover 16-20" (1 pcs)
2 x 20,5x14,5 Falcon electric V2 (40 g)
2 x Steering arm 16 mm Ø 3 mm
1 x Screw-lock connector Ø 2 mm (2 uds)
4 x Steering arm 12 mm Ø 4 mm (2 uds)
1 x Cierre cabina aluminio Ø5, I=16 mm
2 x BALSA triangular 10x10x1000 mm
1 x Crimping sleeves for cable 0.85 mm (10 pcs)
1 x Horizontal cockpit anchor "tipe F3A" (2 pcs)
2 x Cap closure 33/23.5mm (2 uds)
3 x BALSA trip 5.0x5.0x1000 mm
2 x Pine wood slat 3.0x7.0x1000 mm
2 x BALSA trip 6.0x6.0x1000 mm
3 x BALSA trip 4.0x4.0x1000 mm
2 x Locking cable tie 2.5x100 (uds)
2 x Pine wood slat 3.0x5.0x1000 mm
2 x 20x13 Falcon electric carbon prop (64g)
1 x Liston HAYA 8 x 8 x 1000 mm
1 x Covered closure or fairings
1 x Liston HAYA 10 x 10 x 1000 mm
1 x BALSA trip 2.0x10.0x1000 mm
2 x Steering arm 12 mm Ø 4 mm
1 x Steering arm 16 mm Ø 3 mm (2 uds)
1 x Stainless steel cable Ø 0.52 mm - 15 kp (10 m)
1 x Cierre cabina aluminio Ø4, I=10 mm
2 x Pine wood slat 5.0x5.0x1000 mm
1 x Cabin latch Fox MDM1 4m (pair)
2 x Screw-lock pushrod conn snap Ø 1.5 mm (2 uds)
1 x Pine wood slat 6.0x6.0x1000 mm
2 x Pine wood slat 2.0x2.0x1000 mm
1 x Locking cable tie 3.2x142 (uds)
2 x Beech dowels 3.0 x 1000 mm
3 x Propeller 12x6 Falcon electric
2 x Mahogany wood slat 2.0x2.0x1000 mm
1 x Stainless steel cable Ø 0.62 mm (10 m)
1 x Stainless steel cable Ø 0.5 mm (10 m)
1 x Beech dowels 2.0 x 1000 mm
1 x Aluminium alloy coupler for carbon tube 6/M4
3 x Mahogany wood slat 3.0x3.0x1000 mm
1 x Canopy Lock V1 M3 Red (2 pcs)
2 x Linden wood slat 2.0x2.0x1000 mm
3 x Walnut wood slat 1.5x1.5x1000 mm
2 x Canopy Latch
2 x Micro screw-lock pushrod conn snap Ø 1 mm (2 uds)
1 x Stainless steel cable Ø 0.88 mm - 60 kp (10 m)
2 x Beech dowels 4.0 x 1000 mm
1 x BALSA trip 3.0x3.0x1000 mm
1 x Stainless steel cable Ø 0.5 mm (20 m)
3 x BALSA triangular 15x15x1000 mm
1 x Trailing edge BALSA 35x8x1000 mm
1 x Liston HAYA 3 x 10 x 1000 mm
2 x Electric spoiler 250 mm (2 pcs)
2 x Beech dowels 10 mm x 1000 mm
1 x Propeller balancer
2 x Field folding model stand SebArt
1 x Angle of incidence meter
2 x WingFix ULTRA Black Edition
1 x Extractor piñones 2.3/3.2 mm
2 x Truck-trailer for gliders 720 x 285 mm
1 x Angle measurer
1 x PVC 0,14 qmm servos wire Graupner (100 m)
1 x Cable servo PREMIUM MAXI 100m (blanco/rojo/azul) PVC
1 x Propeller APC 10x5 Electric Pusher
1 x Parachute P4
1 x Aluminum Bayonet / strongal D12 mm / 0.5 m
1 x Xoar Electric Beechwood Prop 24x8
1 x Screw-lock connector M2 (2 uds)
1 x SUS wire 3m (nylon coated)
2 x PropCover 16-20" (2 pcs)
2 x Wheel collar 5 mm Ø (4 uds)
3 x 28x5 mm wires output (2 pcs)
2 x Balsa panel 1.0x100x1000 mm
2 x Linden wood slat 3.0x3.0x1000 mm
1 x Pine wood slat 10x10x1000 mm
3 x Balsa panel 1.5x100x1000 mm
2 x Allen wheel collar M4x6
2 x Birch plywood plate 600x300x4.0 mm
2 x Birch plywood plate 600x300x2.0 mm
3 x Steering arm 12 mm Ø 3 mm (2 uds)
2 x quality beech plywood BIRCH 600x300x2.0 mm
1 x Cable grommet Ø 3.2 mm (4 uds)
1 x Control for forward wheel (MINI)
2 x Cable grommet 9.5 mm (4 uds)
1 x Split pin 1.6x16 mm (10 uds)
2 x Tip wing protector 28x10x12 (2 pcs)
1 x Crimping sleeves for cable 1.3 mm (10 pcs)
1 x FIALA Propeller 23x8 Electric
2 x BALSA triangular 6x6x1000 mm
1 x Crimping sleeves for cable 0.70 mm (10 pcs)
2 x USB Mini Camera endoscope
1 x Propeller POWER-PROP 7x7
2 x BALSA trip 10x10x1000 mm
1 x Propeller MEJZLIK 22x10 Electric light (36 g)
1 x 800TVL CMOS camera for FPV
2 x Steering arm 16 mm Ø 4 mm (2 uds)
1 x Propeller FALCON 32,5x11 PUSHER Carbono
1 x Motor DLE 200cc Premium Muffler
1 x Motor DLE 200cc Std
1 x Manometer 4 mm
2 x Cockpit plastic closing
1 x Fully Threaded Steel Rod alumin 70 mm M3 (2 pcs) knurled
1 x Surprise XII Horizontal Estabilizer (Freudenthaler)
1 x DG-303 ACRO 3750 mm, canopy
1 x Gracia (Top Model)
1 x Landing gear axle Ø 4 mm (2 uds)
1 x Medidor ángulos y/o incidencias
1 x Propeller balancer
1 x Birch plywood plate 600x300x2.5 mm
1 x OBECHI sheet 2.0x3.0x1000 mm
1 x Balsa panel 10x100x1000 mm
1 x A/C quality beech plywood 600x300x5.0 mm
1 x Birch plywood plate 600x300x2.0 mm
1 x BALSA trip 2.0x2.0x1000 mm
1 x Balsa panel 5.0x100x1000 mm
1 x Window mounting channel Type H 2.5x0.5 (2 m)
1 x Wheel collar 3.5 mm Ø (4 uds)
1 x A/C quality beech plywood 600x300x1.5 mm
1 x Mahogany wood slat 1.5x1.5x1000 mm
1 x A/C quality beech plywood 600x300x5.0 mm
1 x A/C quality beech plywood 600x300x6.0 mm
1 x Walnut wood slat 3.0x3.0x1000 mm
1 x Lite Plywood panel 600x300x2.0 mm
1 x A/C quality beech plywood 600x300x8.0 mm
1 x A/C quality beech plywood 600x300x6.0 mm
1 x Balsa panel 6.0x100x1000 mm
1 x Pine wood slat 2.0x10.0x1000 mm
1 x Balsa panel 2.5x100x1000 mm
1 x Balsa panel 4.0x100x1000 mm
1 x Plywood sheet BEECH 600 x 300 x 2,0 mm
1 x Birch plywood plate 600x300x4.0 mm
1 x A/C quality beech plywood 600x300x0.8 mm
1 x BALSA leading edge 8x10x1000 mm
1 x A/C quality beech plywood BIRCH 600x300x1.0 mm
1 x Birch plywood plate 600x300x1.5 mm
1 x Pine wood slat 3.0x10.0x1000 mm
1 x BALSA trip 3.0x5.0x1000 mm
1 x A/C economy plywood 600x300x6+.0 mm
1 x Balsa panel 3.0x100x1000 mm
1 x A/C quality beech plywood 600x300x0.6 mm
1 x Balsa panel 8.0x100x1000 mm
1 x 21x14 Falcon electric carbon prop (64 g)
1 x 20x15 Falcon electric V2
1 x Landing gear frontal support 29x26x13,5
1 x 41x5,5 mm wires output (2 pcs)
1 x Wheel collar 3 mm Ø (4 uds)
2 x Tip wing protector 30x10 (2 pcs)
1 x Allen wheel collar M3x3
1 x Lead with adhesive (2 pcs)
1 x Window mounting channel 5m
1 x Split pin 1x8 mm (10 uds)
1 x Snap pin for micro clevis (10 uds)
1 x STEERING FRONT WHEEL SYSTEM BIDULE 55
1 x Wheel collar 4 mm Ø (4 uds)
1 x Wheel collar 2 mm Ø (4 uds)
1 x Wing bolts M3 Steel screw blue (2 pcs)
1 x Cable grommet Ø 6.4 mm (4 uds)
1 x Stainless steel cable Ø 1.3 mm (10 m)
1 x Steering arm 16 mm Ø 4 mm
1 x Wing bolts M3 Steel screw Red (2 pcs)
1 x FOX 3000 mm ARF (FMS)
1 x Avia spare fouselage CF reinforced (Top Model)
1 x FOX 3000 mm, Fuselage (FMS)
1 x ENIGMA ARF
1 x Albatros ,spare cockpit (Top Model)
1 x Challenger ARF (Top Model)
1 x Aero-Master Wings (Aero-naut)
1 x Fascination 3600 mm (Top Model)
1 x Electric spoiler 185 mm (2 pcs)
1 x FANTASY ARF 3.2m
1 x Avia (Top Model)
1 x Ion Pro NG electric with flaps GREEN Fluor (JP Model)
1 x FANTASY ARF 3.0m, Fundas alas
1 x Avia spare blue cockpit (Top Model)
1 x Aero-Master Fuselage (Aero-naut)
1 x Motor Moki S 500 cc 5 cylinders
1 x Moki Pushrod S250 (1 pcs)
1 x Propeller APC 10x4.5 MR
1 x Propeller APC 10x5.5 MR Electric multirrotor
18,254.80EUR
Manufacturers
Manufacturer Info
R-G.de
R-G.de Homepage
Other products
Languages
Español English
Currencies