36.16EUR

Epoxy Casting Resin + Hardener "water-clear" (300 min)
[R1071023]


Epoxy Casting Resin + Hardener "water-clear" (300 min)

General information about the System Epoxy Casting Resin + Hardener "water-clear):
Two-component clear, colourless epoxy system.
The following properties distinguish it from the predecessor EP cast resin “crystal clear”:
Excellent UV resistance for epoxy resins*)
Supertransparent constituents
Polishable, hard surface
Excellent impact strength
Completely tackfree curing even in thin coats
Ideal for transparent coatings
Also suitable as a laminating resin system with a very long pot life
The system's reactivity was raised for smaller initial and casting quantities. An initial batch size of 400 g can be cast per mould without the surface collapsing. Casting thicknesses up to 40 mm are possible with larger initial quantities.

Like all reactive resin systems the casting quantity is limited by the generated reaction heat (exothermal reaction): often a lower curing temperature (e.g. at an ambient night temperature lower than 20 °C) can counteract too great an exothermal reaction.

Pot life : approx. 300 minutes

Mixing ratio:
100 : 37 parts by weight of resin to hardener
100 : 47 parts by volume of resin to hardener

Curing time: approx. 24–48 h

Processing:
Resin and hardener are homogenised for about two minutes at room temperature (23 °C). Afterwards the mixture is left to rest for approx. 20 minutes.
Leave the ready mixture on a flat surface for 48 hours. Please do not mix or otherwise move the product. The total curing time ranges from 24 to 48 hours.
Expertise for the resin system casting resin + hardener "water-clear": this system is not cytotoxic (cell damaging), important for applications in medical purposes!
*) This system has very good UV resistance for EP resins, but, like all epoxy resins, it can turn more or less yellow over time under high UV exposure. Therefore only conditionally suitable for outdoor applications or permanent exposure to artificial light sources.
Typical areas of application: Indoor: railway models, works of art, stage decorations, etc. (only occasionally exposed to UV sources).


temporarily out of stock
temporarily out of stock

Reviews
Categories
* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
  
  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
    Cianocrylate->
    Epoxy->
      EMC-Vega
      KAVAN
      Loctite
      Resoltech
      Epoxy BSI
      Epoxy R-G
    Resin/Gelcoat
    Glass Bubbles
    Contact adhesive
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Tailormade cone A-10 Skymaster
1 x Jet Pipe 160N-250N (120/130 mm)
1 x Turbina KINGTECH K320 G5
1 x Conector MR-60 (pareja)
1 x EXTRA NG 74" yello/blue/red (Skywing RC)
1 x Servo GO-1035MG 16 kg.cm 0.08s/60º
1 x Crimping tool
1 x Wing OXY 5,0 m2
1 x MAX pilot ARTF
1 x Windsock Ozone L -1200 mm
1 x Opale Rucksack
1 x BOEING 727, Retract set for Boeing 727
1 x Carbon tube 3K-PW (L 1000 mm, Ø25 mm, Ø21 mm)
2 x Parachute PV6 for F3J
1 x Rescue 1,8m2 / BackPack
1 x Trike XL motor set (motor+esc+prop)
1 x Paramotor BackPack XXS 2
1 x LUCAS pilot ARTF
1 x Ballast 700gr OPALE
1 x Jet Pipe for A-10 Skymaster (set 2 pcs)
1 x Propeller APC 14x8.5 Electric Pusher
1 x Sandwich carbon + poplar 4mm + carbon 290x160 mm
1 x Propeller POWER-PROP 13x9 Izda
1 x LASER 73" 1.85m (05) PILOT
1 x Propeller POWER-PROP 14x9
1 x Sandwich carbon + poplar 4mm + carbon 480x290 mm
2 x Deposito DUBRO 3000cc-100oz
1 x Mobile Terminal
1 x SERVO HOLDER
1 x Epoxy Resin L + Hardener GL2, kit/ 930 g
1 x Epoxy Resin L + Hardener LT kit/ 895g
1 x TMM 2512-3S heli
1 x Fiberglass landing gear for 140-160
1 x Legs + electric brakes for Viper Jet 90
1 x 1/4 x 1/8" VITON tube for gas, kerosene, smoke (30 cm)
1 x Air Trap Mounting - 175ml
1 x Extra hard 1500 ccm complete gasoline fuel tank
1 x 1000 ccm gasoline fuel tank
1 x EXTREME FLIGHT BLUE MAGNETIC ROUND FILLER PLUG
1 x Conector FESTO M3 Quick 3mm 90º
1 x Epoxy Resin HT 2 + Hardener HT 2, kit/ 296 g
1 x Epoxy Resin L + Hardener LT kit/ 3125g
9,890.75EUR
Manufacturers
Manufacturer Info
R-G.de
R-G.de Homepage
Other products
Languages
Español English
Currencies