36.16EUR

Epoxy Casting Resin + Hardener "water-clear" (300 min)
[R1071023]


Epoxy Casting Resin + Hardener "water-clear" (300 min)

General information about the System Epoxy Casting Resin + Hardener "water-clear):
Two-component clear, colourless epoxy system.
The following properties distinguish it from the predecessor EP cast resin “crystal clear”:
Excellent UV resistance for epoxy resins*)
Supertransparent constituents
Polishable, hard surface
Excellent impact strength
Completely tackfree curing even in thin coats
Ideal for transparent coatings
Also suitable as a laminating resin system with a very long pot life
The system's reactivity was raised for smaller initial and casting quantities. An initial batch size of 400 g can be cast per mould without the surface collapsing. Casting thicknesses up to 40 mm are possible with larger initial quantities.

Like all reactive resin systems the casting quantity is limited by the generated reaction heat (exothermal reaction): often a lower curing temperature (e.g. at an ambient night temperature lower than 20 °C) can counteract too great an exothermal reaction.

Pot life : approx. 300 minutes

Mixing ratio:
100 : 37 parts by weight of resin to hardener
100 : 47 parts by volume of resin to hardener

Curing time: approx. 24–48 h

Processing:
Resin and hardener are homogenised for about two minutes at room temperature (23 °C). Afterwards the mixture is left to rest for approx. 20 minutes.
Leave the ready mixture on a flat surface for 48 hours. Please do not mix or otherwise move the product. The total curing time ranges from 24 to 48 hours.
Expertise for the resin system casting resin + hardener "water-clear": this system is not cytotoxic (cell damaging), important for applications in medical purposes!
*) This system has very good UV resistance for EP resins, but, like all epoxy resins, it can turn more or less yellow over time under high UV exposure. Therefore only conditionally suitable for outdoor applications or permanent exposure to artificial light sources.
Typical areas of application: Indoor: railway models, works of art, stage decorations, etc. (only occasionally exposed to UV sources).


temporarily out of stock
temporarily out of stock

Reviews
Categories
* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
  
  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
    Cianocrylate->
    Epoxy->
      EMC-Vega
      KAVAN
      Loctite
      Resoltech
      Epoxy BSI
      Epoxy R-G
    Resin/Gelcoat
    Glass Bubbles
    Contact adhesive
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
2 x Carbon fiber rod 0.5 mmx1000 mm
2 x Carbon fiber flat 1000x6.0x0.8 mm
2 x Carbon fiber flat 1000x3.0x0.13 mm
2 x Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm
2 x Carbon fiber rod 0.5 mmx1000 mm
2 x Carbon fiber rod 2.0 mmx1000 mm
1 x Carbon fiber rod 3.0 mm x 1000 mm
2 x Carbon fiber rod 20 mmx1000 mm
2 x Carbon fiber rod 14 mmx1000 mm
2 x Carbon fiber rod 8.0 mmx1000 mm
2 x Squared carbon wing joinner 5x5x220 mm
2 x Carbon fiber rod 12 mm x 1000 mm
1 x Carbon fiber flat 1000x3.0x1.0 mm
1 x Carbon fiber rod 10 mm x 1000 mm
2 x Carbon fiber rod 2.5 mmx1000 mm
2 x Carbon fiber rod 7.0 mmx1000 mm
2 x Carbon fiber rod 1.5 mm x 1000 mm
1 x Carbon fiber rod 1.5 mm x 2000 mm
1 x Carbon fiber flat 1000x3.0x1.0 mm
1 x Carbon fiber rod 0.8 mmx1000 mm
1 x Carbon fiber rod 5.0 mmx1000 mm
1 x Carbon fiber rod 1.0 mm x 1000 mm
1 x Carbon fiber flat 1000x3.0x0.5 mm
1 x Carbon fiber rod 1.5 mm x 1000 mm
1 x Carbon rectangular rod 10.0 mm x 1.0 x 1000 mm
1 x BALSA trip 6.0x6.0x1000 mm
1 x Pine wood slat 5.0x5.0x1000 mm
2 x BALSA triangular 15x15x1000 mm
2 x BALSA triangular 8x8x1000 mm
2 x Digital Air Speed Sensor And Pitot Tube Set
1 x BALSA trip 4.0x4.0x1000 mm
1 x BALSA trip 2.0x10.0x1000 mm
1 x Pine wood slat 10x10x1000 mm
1 x Pine wood slat 3.0x5.0x1000 mm
1 x Trailing edge BALSA 35x8x1000 mm
1 x Linden wood slat 3.0x3.0x1000 mm
2 x BALSA trip 5.0x5.0x1000 mm
2 x Beech dowels 3.0 x 1000 mm
1 x Pine wood slat 2.0x2.0x1000 mm
1 x Pine wood slat 3.0x10.0x1000 mm
1 x BALSA trip 8.0x8.0x1000 mm
1 x Pine wood slat 3.0x7.0x1000 mm
1 x Walnut wood slat 3.0x3.0x1000 mm
2 x Beech dowels 4.0 x 1000 mm
1 x BALSA leading edge 8x10x1000 mm
1 x Vacuum pump 12 CFM
1 x Digital scale up to 40 kg
1 x Copier 5x20 cm pcs
1 x Starter 12v (Max 180 and 30ccm)
1 x 1,5x50 mm allen screwdriver
1 x Screwdriver for Hexagon 1,5mm
1 x Screwdriver for Torx® TX6
1 x Starter EM Gear Power 80
1 x Surface Indicator Gauge Small
1 x Angle of incidence meter
1 x Propeller balancer
1 x Brass rod Ø 0.5 mm x 1000 mm
2 x Ferrita 14x8x5.5 mm
2 x Straightened rod Ø 1.0 mm x 1000 mm
2 x Brass hexagonal rod Ø 3 mm x 1000 mm
2 x Ferrita 17x10x6.5 mm
1 x Straightened rod Ø 7.0 mm x 1000 mm
3 x Ferrita 27x14x7 mm
1 x Straightened rod Ø 8.0 mm x 1000 mm
1 x Straightened rod Ø 14.0 mm x 1000 mm
1 x Aluminium rod Ø 4.0 mm x 3000 mm
2 x Brass rod Ø 1.0 mm x 1000 mm
1 x Glass fabric tape 225 g/m² (Silane, plain) 30 mm X 100m
1 x Cierre cabina aluminio Ø5, I=16 mm
1 x Oratex Antik 2m
1 x Mobile Terminal
1 x Nylon hinge 20x20x0,3 (10 pcs)
1 x Pin type hinge Al 4,5x70 mm to wire (2 pcs)
1 x Micro flex hinge (12 uds)
1 x 15 mm reinforced hinge
1 x Round Rod 6,0x1000 mm
1 x Carbon fiber rod 4.0 mmx1000 mm
1 x PPM Encoder Module
1 x BALSA triangular 10x10x1000 mm
1 x Parachute XTRALITE S
1 x Birch plywood plate 600x300x4.0 mm
1 x Brass hexagonal rod Ø 5 mm x 1000 mm
1 x A/C quality beech plywood BIRCH 600x300x1.0 mm
1 x A/C quality beech plywood 600x300x5.0 mm
1 x Brass rod Ø 0.8 mm x 1000 mm
1 x Straightened rod Ø 4.0 mm x 1000 mm
1 x Straightened rod Ø 3.0 mm x 1000 mm
1 x Straightened rod Ø 1.5 mm x 1500 mm
1 x Straightened rod Ø 2.0 mm x 1000 mm
2 x Thread locker "Medium" 10 g
1 x Propeller CFK 12.5x6.5
1 x Propeller CFK 14x8 Slim
1 x Propeller CFK 20x13
1 x Propeller CFK 18,5x12
1 x VITAPROP CARBON FOLDING PROP 15x9.5"
1 x Propeller CFK 23x12
1 x Propeller CFK 14.5x10 Slim
1 x Propeller CFK 16x13
1 x Propeller RF CFK 13x6.5
1 x Propeller CFK 11x8
1 x Propeller RF CFK 14.5x14
1 x Propeller CFK 13x9
1 x Propeller CFK 13x7.5
1 x Propeller CFK 16x16 Slim
1 x Propeller Pleg CAM Carbon 9x4
1 x OBECHI sheet 2.0x3.0x1000 mm
1 x HERON RR
1 x MULTIPLEX ALUMINUM CASE "M-LINK"
1 x USB Charger 120-240V AC
1 x ESC KAVAN R-80SB SBEC 80A
1 x 2,0x50 mm allen screwdriver
1 x Motor OS 3820-1200 electric
1 x HITEC Power Supply 30A. Max. 540w
1 x Lite Plywood panel 600x300x3.0 mm
1 x Power MULTIlight
1 x LENTUS Multiplex Landig gear retract
1 x Pine wood slat 1.5x3.0x1000 mm
1 x Spinner 42 mm EXTRA 330SC
1 x FunCup XL RR
1 x TX 250 mW especial GOPRO
1 x Straightened rod Ø 0.5 mm x 1000 mm
1 x Actro 32-3 Heli MAX 5mm
1 x Epoxy 30 min. 200g
1 x Epoxy Resin L + Hardener LT kit/ 895g
1 x 30/11-26 Zoll, 3-Blade Scale
1 x M3 Maxi ball link (2 uds)
1 x Epoxy SLOW-CURE™ 30 min (130g)
1 x Epoxy FINISH-CURE™ 20 min (130g)
1 x Propeller APC 10x4 Glow/Gas
1 x Propeller APC 12x6 Glow/Gas
1 x Spinner propeller pleg. 40 mm / 4,0 mm
1 x 24x12 prop Super Silence
1 x Spinner propeller pleg. 32 mm / 5,0 mm
1 x Spinner propeller pleg. 36 mm/6,0 mm/5º
1 x Prop rubber XS set 4 pieces
1 x Propeller MASTER 6x3
1 x Spinner propeller pleg. 40 mm / 3,17 mm
1 x Spinner propeller pleg. 38 mm/6,0 mm/5º
1 x Propeller MEJLIK 29x10S
1 x FIALA Propeller 18x10
1 x White spinner propeller pleg. 36 mm / 5 mm
1 x FIALA Propeller 20x8
1 x QUANTUM II 55 Brushless Motor
1 x FesEx-Uni6 System
1 x Epoxy Casting Resin + Hardener "water-clear" (300 min)
1 x Epoxy L 40 min. (1 Kg) 715g Resina / 285g Hardener S (15 min)
1 x Epoxy 5 min. 200g
1 x Propeller FALCON 32,5x11 PUSHER Carbono
1 x FALCON 27X11 CARBON PROPELLER (GAS)
1 x 120x60 mm SLH KOVO wheel
1 x Adhesive epoxy structures RESOLTECH 3350 (1 kg)
1 x Propeller APC 15x6 Glow/Gas
1 x Propeller APC 14x6 Glow/Gas
1 x Propeller APC 10x7 Glow/Gas
1 x 22x10 prop Super Silence
1 x 29x12 prop Super Silence
1 x 30x14 prop Super Silence
1 x Spinner Alumin. propeller pleg. 30 mm / 3,2 mm
1 x Propeller POWER-PROP 13x8
1 x FIALA Propeller 23x10
1 x Spinner propeller pleg. 30 mm / 5,0 mm
1 x Propeller FIALA 15x8 3-Blade
1 x Spinner propeller pleg. 33 mm / 6,0 mm
1 x Spare white 36-38 mm spinner
1 x Z Spinner (CN) 30mm
1 x Spinner propeller pleg. 38 mm / 6,0 mm
1 x Propeller MASTER 7x3
1 x Spinner fold propeller 38 mm (white spare spinner)
1 x Epoxy 40 min (Hardener). 10Kg
1 x Epoxy 40 min (Hardener). 1 Kg
1 x Epoxy Resin L + Hardener GL2, kit/ 930 g
1 x Epoxy 40 min. 4kg (Hardener)
7,455.39EUR
Manufacturers
Manufacturer Info
R-G.de
R-G.de Homepage
Other products
Languages
Español English
Currencies