36.16EUR

Epoxy Casting Resin + Hardener "water-clear" (300 min)
[R1071023]


Epoxy Casting Resin + Hardener "water-clear" (300 min)

General information about the System Epoxy Casting Resin + Hardener "water-clear):
Two-component clear, colourless epoxy system.
The following properties distinguish it from the predecessor EP cast resin “crystal clear”:
Excellent UV resistance for epoxy resins*)
Supertransparent constituents
Polishable, hard surface
Excellent impact strength
Completely tackfree curing even in thin coats
Ideal for transparent coatings
Also suitable as a laminating resin system with a very long pot life
The system's reactivity was raised for smaller initial and casting quantities. An initial batch size of 400 g can be cast per mould without the surface collapsing. Casting thicknesses up to 40 mm are possible with larger initial quantities.

Like all reactive resin systems the casting quantity is limited by the generated reaction heat (exothermal reaction): often a lower curing temperature (e.g. at an ambient night temperature lower than 20 °C) can counteract too great an exothermal reaction.

Pot life : approx. 300 minutes

Mixing ratio:
100 : 37 parts by weight of resin to hardener
100 : 47 parts by volume of resin to hardener

Curing time: approx. 24–48 h

Processing:
Resin and hardener are homogenised for about two minutes at room temperature (23 °C). Afterwards the mixture is left to rest for approx. 20 minutes.
Leave the ready mixture on a flat surface for 48 hours. Please do not mix or otherwise move the product. The total curing time ranges from 24 to 48 hours.
Expertise for the resin system casting resin + hardener "water-clear": this system is not cytotoxic (cell damaging), important for applications in medical purposes!
*) This system has very good UV resistance for EP resins, but, like all epoxy resins, it can turn more or less yellow over time under high UV exposure. Therefore only conditionally suitable for outdoor applications or permanent exposure to artificial light sources.
Typical areas of application: Indoor: railway models, works of art, stage decorations, etc. (only occasionally exposed to UV sources).


temporarily out of stock
temporarily out of stock

Reviews
Categories
* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
  
  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
    Cianocrylate->
    Epoxy->
      EMC-Vega
      KAVAN
      Loctite
      Resoltech
      Epoxy BSI
      Epoxy R-G
    Resin/Gelcoat
    Glass Bubbles
    Contact adhesive
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x White smoke bombs AX-18 (5 pcs)
1 x White smoke canister 100 g
2 x AX-60 starters (5 pcs)
1 x Yellow smoke canister 65 g
1 x Green smoke canister 100 g
1 x 3l Smoke oil
1 x Blue smoke canister 140 g
1 x Smoke set "M"
1 x Red smoke canister 100 g
2 x Yellow smoke bombs AX-60 (5 pcs)
1 x Smoke set "Glider"
1 x AX-60 starters (5 pcs)
2 x Black smoke bombs AX-60 (5 pcs)
1 x Blue smoke canister 100 g
1 x PCARD Wireless System
2 x Initior Receiver FRX2 Wireless
2 x White smoke bombs AX-9 (10 pcs)
1 x Remote electric ignition system
2 x Green smoke canister 140 g
2 x Mixers smoke bombs AX-60 (5 pcs)
1 x White smoke canister 65 g
1 x "M" set
1 x Green smoke canister 65 g
2 x Red smoke canister 65 g
2 x Strip 1,5x1,5x330 mm
2 x ABS Strip 1.5x6.0x1000 mm
1 x Round Rod 4,0x1000 mm
1 x ABS Strip 1.0x2.0x1000 mm
1 x Round Rod 1,25x1000 mm
1 x Ballast 700gr OPALE
2 x Rescue 1,8m2 / BackPack
1 x Trike XL motor set (motor+esc+prop)
1 x Parachute PV6 for F3J
1 x Parachute BACKUP X100
1 x Parachute P4
1 x Para-RC Mix
1 x Paramotor Kit Camo H1.5/ Ben Red
1 x Set cintas unión paracaídas 145 cm
2 x Wing OXY 5,0 m2
2 x Para-RC "RC-Evo-Cross" Rescue
1 x Linden wood slat 3.0x3.0x1000 mm
1 x Pine wood slat 6.0x6.0x1000 mm
2 x Pine wood slat 1.5x3.0x1000 mm
1 x Pine wood slat 3.0x5.0x1000 mm
2 x BALSA triangular 6x6x1000 mm
1 x Pine wood slat 3.0x10.0x1000 mm
2 x BALSA trip 3.0x3.0x1000 mm
1 x BALSA trip 4.0x4.0x1000 mm
1 x BALSA trip 2.0x10.0x1000 mm
1 x Trailing edge BALSA 35x8x1000 mm
1 x OBECHI sheet 2.0x3.0x1000 mm
1 x Mahogany wood slat 3.0x3.0x1000 mm
1 x BALSA triangular 15x15x1000 mm
1 x Pine wood slat 3.0x7.0x1000 mm
1 x Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m
1 x Carbon Non-Woven, 160 g/m² 100 cm 5m
1 x Monokote ROJO misil (1.8x0.65m)
1 x Oracover Yellow CUB 2 m
1 x Aluminium cap bolt washer M3 green (8 pcs)
1 x Interface Realflight Simulator
1 x Couple M4 for wire (10 pcs)
1 x Horn 16,5x20 mm (2 pcs)
1 x 1/6 Pilot "Garry"
1 x Sun Cover ULTIMATUM 2.0 (Hispano Aviacion)
1 x resin-hardener package L-385 with hardener H-385 (3.5 Kg)
2 x Mould Resin P 10 kg
1 x Red smoke canister 140 g
1 x Yellow smoke canister 140 g
1 x White smoke bombs AX-60 (5 pcs)
1 x "S" set for planes
1 x Bateria DJI Mini 2 2250 mAh
1 x TS832 to Gopro AV/Power Cable
1 x Fiberglass plate 620x540x0,2 mm
1 x ABS Strip 1.0x5.0x1000 mm
1 x Strip 2,5x1,25x330 mm
1 x ABS Strip 1.5x4.0x1000 mm
1 x Round Rod 6,0x1000 mm
1 x Strip 3,5x1,75x330 mm
1 x Strip ABS 2.0x3.0x1000 mm
1 x White smoke canister 140 g
1 x B4-0 rocket charges (6 pcs)
1 x ABS Strip 1.5x3.0x1000 mm
1 x ABS I Strip 20x10x1000 mm
1 x Ventral support for AX-18/AX-60
1 x Round Rod 2,5x1000 mm
1 x Strip ABS 2.0x10.0x1000 mm
1 x Yellow smoke canister 100 g
1 x 
1 x Carbon fiber rod 0.5 mmx1000 mm
1 x CORTEX
1 x Fresa corte diamante Ø 1.4mm (bola)
1 x Boxed KIT OF 7 Rotary Burrs FINE
1 x 
1 x EC-Cutter
2 x Wing OXY 0,5 pulgadas2
1 x Paramotor Trike XL
1 x quality beech plywood BIRCH 600x300x2.0 mm
1 x Foam plastic plates (310x210x2 mm)
1 x BALSA trip 3.0x5.0x1000 mm
1 x Mahogany wood slat 2.0x2.0x1000 mm
1 x A/C quality beech plywood 600x300x0.6 mm
1 x Thermoforming sheet 0.3mm (0.039in) DIN A4
1 x Carbon plate 550x350x2.5 mm ECOTECH
1 x Styrene plate 320x120x0.5 mm
1 x Carbon plate 550x350x3.0 mm ECOTECH
1 x BALSA leading edge 8x10x1000 mm
1 x BALSA trip 8.0x8.0x1000 mm
1 x Sandwich Carbon fibre Rohacell (800 x 280 x 3 mm)
1 x Sandwich carbon + poplar 3mm + carbon 480x290 mm
1 x Epoxy 30 min. 200g
1 x Epoxy Resin L 285 + Hardener 285 (Aero), kit/ 1 kg
1 x Epoxy 10 min 190g
1 x Adhesive epoxy structures RESOLTECH 3350 (1 kg)
1 x Catalyst RESOLTECH 3357-T (0.45 Kg) Suitable for adhesive 3350/1
1 x Hardener P-25, canister 2.5Kg
1 x Epoxy Resin L + Hardener L (40 min) 240g (200g Resin L + 40g Har
9,358.26EUR
Manufacturers
Manufacturer Info
R-G.de
R-G.de Homepage
Other products
Languages
Español English
Currencies