36.16EUR

Epoxy Casting Resin + Hardener "water-clear" (300 min)
[R1071023]


Epoxy Casting Resin + Hardener "water-clear" (300 min)

General information about the System Epoxy Casting Resin + Hardener "water-clear):
Two-component clear, colourless epoxy system.
The following properties distinguish it from the predecessor EP cast resin “crystal clear”:
Excellent UV resistance for epoxy resins*)
Supertransparent constituents
Polishable, hard surface
Excellent impact strength
Completely tackfree curing even in thin coats
Ideal for transparent coatings
Also suitable as a laminating resin system with a very long pot life
The system's reactivity was raised for smaller initial and casting quantities. An initial batch size of 400 g can be cast per mould without the surface collapsing. Casting thicknesses up to 40 mm are possible with larger initial quantities.

Like all reactive resin systems the casting quantity is limited by the generated reaction heat (exothermal reaction): often a lower curing temperature (e.g. at an ambient night temperature lower than 20 °C) can counteract too great an exothermal reaction.

Pot life : approx. 300 minutes

Mixing ratio:
100 : 37 parts by weight of resin to hardener
100 : 47 parts by volume of resin to hardener

Curing time: approx. 24–48 h

Processing:
Resin and hardener are homogenised for about two minutes at room temperature (23 °C). Afterwards the mixture is left to rest for approx. 20 minutes.
Leave the ready mixture on a flat surface for 48 hours. Please do not mix or otherwise move the product. The total curing time ranges from 24 to 48 hours.
Expertise for the resin system casting resin + hardener "water-clear": this system is not cytotoxic (cell damaging), important for applications in medical purposes!
*) This system has very good UV resistance for EP resins, but, like all epoxy resins, it can turn more or less yellow over time under high UV exposure. Therefore only conditionally suitable for outdoor applications or permanent exposure to artificial light sources.
Typical areas of application: Indoor: railway models, works of art, stage decorations, etc. (only occasionally exposed to UV sources).


temporarily out of stock
temporarily out of stock

Reviews
Categories
* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
  
  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
    Cianocrylate->
    Epoxy->
      EMC-Vega
      KAVAN
      Loctite
      Resoltech
      Epoxy BSI
      Epoxy R-G
    Resin/Gelcoat
    Glass Bubbles
    Contact adhesive
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Adjustable brass horn threaded M3
1 x Universal Colour Paste signal white (RAL 9003) 1 Kg
1 x Dean-T Plug Mold
1 x 
1 x Copier 2x20 cm pcs
1 x TMM 2512-3S heli
1 x Swing 1000
2 x Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m
1 x Silicone 0,50 qmm servos wire Graupner(5 m)
1 x 12 mm floating pad (49 pcs)
1 x M2,5 5Diam black ball link V2 (2 pcs)
1 x Blind nut M6 (4 pcs)
1 x Aluminium cap bolt washer M3 green (8 pcs)
1 x Brass hexagonal rod Ø 3.5 mm x 1000 mm
1 x White smoke bombs AX-9 (10 pcs)
1 x M3 INDUSTRIAL ball link (2 uds)
1 x 67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x Straightened rod Ø 3.0 mm x 1000 mm
1 x Support XT60 conector (2 pcs)
1 x Aluminun wheel collar 5 mm Ø (4 uds)
1 x PVC 0,14 qmm servo wire Futaba (5 m)
1 x Aluminium cap bolt washer M3 black (8 pcs)
1 x Long pinned hinge (6 uds)
1 x Aluminium cap bolt washer M4 green (8 pcs)
1 x Anodized aluminium M4x0,7x20 mm screw (4 blue pcs)
1 x Anodized alum. M4x0,7x20 mm Button Head screw (4 dark blue pcs)
1 x Miniature brass strap hinge, 1 m
1 x Nylon hinge 20x20x0,3 (10 pcs)
1 x Ball link M2 (10 pcs)
1 x ABS tube 4.0x3.0x1000 mm
1 x Straightened rod Ø 1.2 mm x 1500 mm
1 x Anodized alum. M4x0,7x20 mm Flat Head screw (4 lilac pcs)
1 x Civilian pilot "Pamela" size 9cm (Slimline)
1 x Blind nut M2 (10 pcs)
1 x Smoke set "M"
1 x Wing tips support for AX-18/AX-60 (2 pcs)
1 x Double conector with JR adapter and 200 mm extension
1 x Silicone 0,35 qmm servos wire Futaba (100 m)
2 x Cable servo PREMIUM MAXI 1 m (blanco/rojo/azul) PVC
1 x Straightened rod Ø 2.5 mm x 1000 mm
1 x Fresa corte diamante Ø 1.0mm (bola)
1 x 1,5x50 mm allen screwdriver
1 x PARTALL® Hi-Temp Wax, 340 g
1 x Solvent Plasti Dip 1000 ml
1 x Carbon fiber rod 1.5 mm x 2000 mm
1 x Round Rod 4,0x1000 mm
1 x Carbon fiber rod 0.8 mmx1000 mm
1 x Round Rod 1,25x1000 mm
1 x ABS I Strip 20x10x1000 mm
1 x Spray EC Red 400ml
1 x 25 mm Sandpaper file
1 x Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm
1 x Squared carbon wing joinner 5x5x220 mm
1 x TMM 1210-3S heli
1 x Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M
1 x 
1 x Glass fabric tape 225 g/m² (Silane, plain) 40 mm
1 x Epoxy Resin HT 2 + Hardener HT 2, kit/ 296 g
1 x Glass fabric tape 49 g/m² (Interglas 02037, finish FE 600/800, p
1 x Glass Bubbles (0,12 g) 350 ml
1 x resin-hardener L-385 H-385 (5000 g)
1 x Epoxy 5 min. 500 g (Hardener)
1 x PWC4 wing/fuselage connector for 4 servos
1 x Fiberglass heat shield Ø 4 mm 1000 mm
1 x Cable set PREMIUM Maxi, SUB-Done 4three fuselage/wing 200 cm
1 x TP/TopFuel - XH 2/3S Adapter
1 x FOAM - CURE™ (24g)
1 x Epoxy Resin L 285 + Hardener 285 (Aero), kit/ 2.8 kg
1 x Alignment dowels (2 parts, outer-Ø 8 mm) bag/ 100 pairs
1 x Epoxy 40 min. 4kg (Hardener)
1 x Epoxy 5min KAVAN 2x 100g
1 x Epoxy Resin L (2.5 Kg)
1 x Epoxy adhesivo Elan-tech ADH 981.892 50ml (dark grey)
1 x Carbon fibre tape 200 g/m² (unidirectional) 50 mm
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs)
1 x Epoxy Resin L + Hardener LT kit/ 895g
1 x Release wax 250ml
1 x Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 100M
1 x Epoxy 30 min. 200g
1 x Epoxy L 40 min. 10 kg (Resin)
1 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m
1 x Hardener Aero EPH 161 (250 g)
1 x Foaming agent for epoxy resins 200 g
1 x Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m
1 x Mixing tube for double syringes and cartridges (MR 1:1 and 2:1)
1 x Thixotropic agent tin/ 15 g (approx. 350ml)
1 x 
2 x Epoxy L 40 min. (1 Kg) 715g Resina / 285g Hardener S (15 min)
1 x CA Glue (medium) 20g
1 x Epoxy SLOW-CURE™ 30 min (130g)
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs)
1 x Mould Resin P + Hardener EPH 161-P, kit/ 585 g
1 x Epoxy Resin L 285 + Hardener 386, kit/ 1.35 kg
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs)
1 x Epoxy 5 min. 200g
1 x Cotton Flocks, bag/ 7 Kg
1 x Epoxy 5 min. 500 g (Resin)
1 x HDT Jet Central
1 x JETCENTRAL ECU LIFE BATTERY 3800 MAH
1 x Colador RABBIT
1 x Blue metalic ball link M2/2 azul (2 pcs)
1 x M2,5 Diam metal short ball link V3 (2 pcs)
1 x Joint with bearing M2 22x5,5
1 x Ball link M2,5 (10 pcs)
1 x M3 Maxi ball link (2 uds)
1 x Opto Gas Engine Kill Switch
1 x Black silicone 0,25 mm² wire (25 m)
1 x USB Interface REVOLECTRIX for CellPRO 10s
1 x Pin hinge 26x11 mm (10 uds)
1 x Prolonguer for Balancer Thunder Power 6S
1 x 50m servo "Premium" wire (white/red/blue)
1 x Servo slow down unit (0,7-14,7 sec )
1 x Small flex hinge (12 uds)
1 x Neumatic retractable landing gear (Aero-Naut)
1 x Protective Cover for wires Ø 10 mm 1000 mm
1 x Mini neumatic retract 4 mm landing gear (Het-rc)
1 x Cable set Premium™ MAXI "one4two"
1 x Aluminium tube with fibreglass case ø35x1.5mm, 500mm
1 x Robart Door Hinge (Pk2)
1 x 40 mm air cylinder
1 x Cable servo PREMIUM MAXI 10m (blanco/rojo/azul) PVC
1 x SBEC Jeti
1 x SPARK Switch 12v
1 x Short Switch On/Off micro
1 x Cabel PVC 2 x 0.25 mm2 (5 m) red-black
1 x Protective Cover for wires Ø 6 mm 1000 mm
2 x Carbon fiber rod 8.0 mmx1000 mm
2 x Carbon fiber rod 4.0 mmx1000 mm
2 x Carbon fiber rod 1.5 mm x 1000 mm
4,575.85EUR
Manufacturers
Manufacturer Info
R-G.de
R-G.de Homepage
Other products
Languages
Español English
Currencies