Top » Catalog » Hardware » Adhesives/Resin/Epoxy » Epoxy » Epoxy R-G » R1001352

165.00EUR

Epoxy L 40 min. 10 kg (Resin)
[R1001352]

Epoxy L 40 min. 10 kg (Resin)

General information about the system Epoxy Resin L with different hardeners

Low viscosity, free of solvents and fillers
Fast impregnation of glass, aramid, and carbon fibres
High static and dynamic strength
Epoxy Resin L with the corresponding hardeners is the most commonly used laminating and adhesive resin in the R&G delivery programme.

In conjunction with the Hardeners S (15 minutes), L (40 minutes), CL (60 minutes), EPH 500 (60 minutes), EPH 161 (90 minutes), W 300 (300 minutes), GL 1 (30 minutes) and GL 2 (210 minutes), this epoxy resin exhibits similar mechanical properties to those of the laminating systems usual aerospace .Its heat deflection temperature reaches from 60 °C (S, L, EPH 500, W 300), to 80 °C (GL 1 and GL 2, after post-curing), to 95 °C (CL, after post-curing) and finally to 120 °C (EPH 161, after post-curing).

Epoxy Resin L has a low viscosity, is free of solvents and fillers, and ideal for impregnating glass, aramid, and carbon fibres. Its low surface tension, good adhesion, and minimal curing shrinkage makes it ideal for bonding wood, metal, foamed polystyrene, etc. It can be processed in all of the customary methods, e.g. hand lay-up operations, pressure and vacuum impregnation, press moulding, winding, etc.

The well-proven R&G Epoxy Resin L in combination with Hardeners GL 1 and GL 2 offer an approval by the Germanische Lloyd for the construction of boats and rotor blades for wind turbines.
Expertise for the resin systems Epoxy Resin L + Hardener S, Epoxy Resin L + Hardener L, Epoxy Resin L + Hardener CL and Epoxy Resin L + Hardener EPH 500: these are not cytotoxic (cell damaging), important for applications in medical purposes.
Laminate structures for vehicle construction in combination with Hardener EPH 161 are approved by the TÜV-Süd (Document available in german language only).

under request

Reviews

Customers who bought this product also purchased

Connectors MPX 8 pins (green) 1 pair (male-female) under request	Gas, Smoke Fluid or Kerosene Refueling Dry-Break Ports w/Return under request	Epoxy 40 min. 4kg (Hardener) under request
Silicone red 4,0 qmm wire (25 m) under request	XT-90 connector (pair) under request	Servo HITEC HSB-9380TH under request

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
    Cianocrylate->
    Epoxy->
      EMC-Vega
      KAVAN
      Loctite
      Resoltech
      Epoxy BSI
      Epoxy R-G
    Resin/Gelcoat
    Glass Bubbles
    Contact adhesive
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

22x12 Falcon electric
105.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

3 x	Motor A2212/13T
2 x	ABS angle 6,0x6,0x1000 mm
2 x	Profile ABS half cane 4x2.5x1000 mm
2 x	ABS rectangular profile 12x6.0x1000 mm
1 x	Straightened rod Ø 0.5 mm x 1000 mm
1 x	Medidor ángulos y/o incidencias
1 x	Truck-trailer for gliders 720 x 239 mm
1 x	Extension 100 cm (Futaba)
1 x	Carbon fiber rod 4.0 mmx1000 mm
1 x	Extension 90 cm (Futaba)
1 x	Carbon rectangular rod 10.0 mm x 1.0 x 1000 mm
1 x	Propeller balancer
1 x	Carbon fiber rod 10 mm x 1000 mm
1 x	Carbon fiber rod 7.0 mmx1000 mm
1 x	Carbon fiber rod 2.5 mmx1000 mm
1 x	Carbon fiber flat 1000x3.0x0.5 mm
1 x	200 mm extensión servo HITEC/JR
1 x	Carbon fiber rod 6.0 mmx1000 mm
1 x	Extension silicon 50 cm (Futaba)
1 x	Cable S.BUS 3 salidas 300 mm
1 x	Cabel "Y" 30 cm (graupner)
1 x	Extension lead 15 cm Multiplex
1 x	Xoar Electric Beechwood Prop 22x10
1 x	Cable tie mounts 4.3 (4 uds)
1 x	Allen wheel collar M3x3
1 x	Cabin latch Fox MDM1 4m (pair)
1 x	280 cc gasoline fuel tank complet
1 x	Foaming agent for epoxy resins 200 g
1 x	Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m
1 x	CA Glue fast 20g
1 x	Ball Bearing Oil 25 ml
1 x	Birch plywood plate 600x300x2.5 mm
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs)
1 x	Aluminium cap bolt washer M4 red (8 pcs)
1 x	aluminium servo arm V2-JR 2,0 inch M3
1 x	12 mm floating pad (49 pcs)
1 x	10 mm Quick clamp_L (6 pcs)
1 x	Aluminium cap bolt washer M3 green (8 pcs)
1 x	6 mm Quick clamp_S (10 pcs)
1 x	ABS "T" angle 8.0x8.0x1000 mm
1 x	Profile ABS Square 1 x 1000 mm
1 x	Profile ABS triangular 2.0x1000 mm 90º
1 x	ABS rectangular profile 10x5.0x1000 mm
1 x	ABS "T" angle 6.0x6.0x1000 mm
1 x	ABS angle 10,0x10,0x1000 mm
1 x	Profile ABS triangular 6.0x1000 mm 90º
1 x	ABS "T" angle 10.0x10.0x1000 mm
1 x	Profile ABS half cane 3x1000 mm
1 x	ABS angle 4,0x4,0x1000 mm
1 x	ABS angle 2,0x2,0x1000 mm
1 x	Streamline Stainless Steel Tubing 10.5x5.7x1000 m
1 x	Aluminium rod Ø 4.0 mm x 3000 mm
1 x	Straightened rod Ø 1.2 mm x 1500 mm
1 x	Straightened rod Ø 14.0 mm x 1000 mm
1 x	Straightened rod Ø 8.0 mm x 1000 mm
1 x	Cabel "Y" 30 cm (Futaba)
1 x	Carbon fiber rod 1.5 mm x 1000 mm
1 x	Extension silicon 25 cm (Futaba)
1 x	Carbon fiber rod 1.0 mm x 1000 mm
1 x	800TVL CMOS camera for FPV
1 x	Carbon fiber rod 16 mm x 1000 mm
1 x	Squared carbon wing joinner 5x5x220 mm
2 x	11 mm Rubber pads (14 pcs)
1 x	Aluminun wheel collar 6 mm Ø (4 uds)
1 x	Allen wheel collar M4x6
1 x	PT 21x13 EL Propeller 3 Blade
1 x	Clip fixing for wing (2 pcs)
1 x	Aluminium alloy coupler for carbon tube 6/M4
1 x	Aluminun wheel collar 4 mm Ø (4 uds)
1 x	Ferrita 14x8x5.5 mm
1 x	100 mm rods + T patellas set for direction control
1 x	Aluminun wheel collar 2.5 mm Ø (4 uds)
1 x	Epoxy L 40 min. 10 kg (Resin)
1 x	Hardener EPIKURE™ Curing Agent MGS™ LH285, bottle/ 800 g
1 x	Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m
1 x	Conector MR-60 (pareja)
1 x	Cyanocrylate MD GA460 odourless 20g
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m
1 x	Brazo servo KAVAN doble aluminio 25T - 2.5" M3
1 x	Crawler GRE-24 RTR 1:24 Arena
1 x	Aluminium wide washer M3 blue (4 pcs)
1 x	aluminium servo arm V1-JR 1,0 inch M2
1 x	Profile ABS half cane 2.0x1000 mm
1 x	ABS angle 5,0x5,0x1000 mm
1 x	Cross Connector 4.0 mm x 1000 mm
1 x	Rubber profile 10-2 mm 2M
1 x	ABS angle 1.5x1.5x1000 mm
1 x	ABS "T" angle 4.0x4.0x1000 mm
1 x	L-Connector 1.0 mm x 1000 mm
1 x	Profile ABS half cane 8.0x1000 mm
1 x	Profile ABS half cane 5.0x1000 mm
1 x	Flat Connector 4.0 mm x 1000 mm
1 x	L-Connector 4.0 mm x 1000 mm
1 x	Profile ABS Square 3 x 1000 mm
1 x	Straightened rod Ø 1.0 mm x 1000 mm
1 x	Straightened threaded rod M3 - 1m
1 x	Straightened rod Ø 2.5 mm x 1000 mm
1 x	Straightened rod Ø 4.5 mm x 1000 mm
1 x	Carbon fiber rod 1.5 mm x 2000 mm
1 x	Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm
1 x	Carbon fiber rod 12 mm x 1000 mm
1 x	Extension silicon 30 cm female (Graupner)
1 x	Extension silicon 35 cm (Futaba)
1 x	Extension silicon 25 cm (Graupner)
1 x	Extension 15 cm (Futaba)
1 x	Field folding model stand SebArt
1 x	Extension silicon 75 cm (Futaba)
1 x	Cable silicona macho batt. receptor 30 cm (Futaba)
1 x	USB Mini Camera endoscope
1 x	Carbon wing joinner 13,4 mm Ø 0,48 mm
1 x	Carbon fiber rod 20 mmx1000 mm
1 x	Extension silicon 100 cm (Graupner)
1 x	0,14 mm PVC servo wire extension, ZH micro conector.
1 x	Carbon fiber rod 14 mmx1000 mm
1 x	Extension silicon 10 cm (Futaba)
1 x	WingFix ULTRA Black Edition
1 x	Extension PVC 150 cm (Graupner)
1 x	Extension 30 cm (Futaba)
1 x	Carbon fiber rod 8.0 mmx1000 mm
1 x	Extension 7.5 cm
1 x	Carbon fiber rod 0.5 mmx1000 mm
1 x	Propeller balancer
1 x	Extension silicon 75 cm (Graupner)
1 x	Extension silicon 30 cm female (Futaba)
1 x	Futaba Female 40 cm extension
1 x	Carbon fiber flat 1000x6.0x0.8 mm
1 x	Extension silicon 10 cm (Graupner)
1 x	Cable S.BUS 3 salidas 100 mm
1 x	Extension S-Bus 1-2 silicon 30 cm FUTABA
1 x	Extension silicon 50 cm (Graupner)
1 x	Futaba Female 40 cm extension
1 x	Truck-trailer for gliders 720 x 285 mm
1 x	Extension S-Bus 1-2 silicon 120 cm FUTABA
1 x	Angle measurer
1 x	Surface Indicator Gauge Small
1 x	Premium servo extension 100cm
1 x	Carbon fiber rod 5.0 mmx1000 mm
1 x	Field folding model stand
1 x	Cable silicona macho batt. receptor 30 cm (Graupner)
1 x	Carbon fiber rod 2.0 mmx1000 mm
1 x	Cabel "Y" 15 cm
1 x	Extension silicon 30 cm male (Futaba)
1 x	PT 16x10 E Propeller
1 x	80 mm rods set for direction control
1 x	Aluminun wheel collar 3 mm Ø (4 uds)
1 x	Cable grommet Ø 5 mm (4 uds)
1 x	Cable grommet 9.5 mm (4 uds)
1 x	Allen wheel collar M4x4
1 x	Epoxy QUIK-CURE™ 5 min (130g)
1 x	Aluminun wheel collar 5 mm Ø (4 uds)
1 x	PT 22x10 EL Propeller
1 x	Ventus 1:4 set of instruments
1 x	Xoar Electric Beechwood Prop 21x10
1 x	Canopy Latch
1 x	Allen wheel collar M3x5
1 x	38x4,5 mm wires output (2 pcs)
1 x	Canopy Lock V1 M3 Blue (2 pcs)
1 x	100 mm rods set for direction control
1 x	Epoxy SLOW-CURE™ 30 min (130g)
1 x	Jeti Black cap
1 x	Cap closure 33/23.5mm (2 uds)
1 x	Xoar Electric Beechwood Prop 16x7
1 x	Xoar Electric Beechwood Prop 15x8
1 x	Ferrita con funda
1 x	Xoar Electric Beechwood Prop 24x8
1 x	PT 21x13 EL Propeller
1 x	Xoar Electric Beechwood Prop 20x10
1 x	Ferrita 17x10x6.5 mm
1 x	Cierre cabina aluminio Ø5, I=16 mm
1 x	Epoxy SLOW-CURE™ 30 min (260g)
1 x	Cable grommet Ø 6.4 mm (4 uds)
1 x	140 mm rods + T patellas set for direction control
1 x	Ferrita 27x14x7 mm
1 x	Canopy Lock V1 M3 Red (2 pcs)
1 x	Cable grommet Ø 3.2 mm (4 uds)
1 x	90 mm rods + T patellas set for direction control
1 x	Cierre cabina aluminio Ø4, I=10 mm
1 x	41x5,5 mm wires output (2 pcs)
1 x	250 mm / 16 mm Airbrakes
1 x	Epoxy FINISH-CURE™ 20 min (130g)
1 x	140 mm rods set for direction control
1 x	PT 20x13 EL Propeller
1 x	45 mm rods + T patellas set for direction control
1 x	Epoxy L 40 min. (1 Kg) 715g Resina / 285g Hardener S (15 min)
1 x	UHU hart 35 g
1 x	Alignment dowels (2 parts, outer-Ø 8 mm) bag/ 100 pairs
1 x
1 x	Epoxy 40 min. 4kg (Hardener)
1 x	Epoxy Resin L 285 + Hardener 386, kit/ 1.35 kg
1 x	152x46 Ø6.0 mm aluminium core wheel
1 x	resin-hardener package L-385 with hardener H-385 (875 g)
1 x	102x26 Ø6.0 mm aluminium core wheel
1 x	resin-hardener L-385 H-385 (625 g)
1 x	FOAM - CURE™ (24g)
1 x	1/12 Pilot "Langley"
1 x	MEKP Harderner 100 g
1 x	Epoxy 30 min. 200g
1 x	Epoxy Resin L + Hardener L (40 min) 3.5 Kg (2.5 kg Resin L + 1 k
1 x	Epoxy Resin L 285 + Hardener 285 (Aero), kit/ 2.8 kg
1 x	Mixing tube for double syringes and cartridges (MR 1:1 and 2:1)

3,544.74EUR