Top » Catalog » Hardware » Adhesives/Resin/Epoxy » Epoxy » Epoxy R-G » R1040952AP

65.75EUR

Epoxy Resin L + Hardener GL 1 (30 min)
[R1040952AP]

Epoxy Resin L + Hardener GL 1 (30 minutes), set of two componets
The well-proven R&G Epoxy Resin L in combination with Hardener GL 1 offers an approval by the Germanische Lloyd for the construction of boats and rotor blades for wind turbines.

Processing time: approx. 30 minutes

Mixing ratio:
100 : 30 parts by weight resin : hardener
100 : 35 parts by volume resin : hardener

Properties:
Low viscosity (820 mPas at 25 °C)
Fully cures at 10 °C
Glass transition temperature (Tg) > 80 °C (post-curing at 70 °C / 15 h)
Ambient curing does not result in brittleness (at 20 °C)
High static and dynamic strength
This newly delevoped resin system is ideal for wetting-out glass, aramid and carbon fibres. It exhibits a very good price/performance ratio and is suitable for the following processing procedures:

Resin infusion (RI)
RTM (resin transfer moulding)
Press moulding
Vacuum moulding
Filament winding
Hand laminating

The resin component itself is absolutely free of crystallization due to its Bisphenol A/F base! The resin system is ambient curing and develops no distinctive brittleness even at curing temperatures below 20 °C. We however recommend, to improve the mechanical and physical properties, to perform a post-curing at least at 40 °C over 15 h.

Mixing table with processing times of Epoxy resin L + mixed Hardeners GL 1/2. The mixing ratio of 100: 30 resin to hardener remains unchanged.

under request

Reviews

Customers who bought this product also purchased

Epoxy QUIK-CURE™ 5 min (260g)

under request

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
    Cianocrylate->
    Epoxy->
      EMC-Vega
      KAVAN
      Loctite
      Resoltech
      Epoxy BSI
      Epoxy R-G
    Resin/Gelcoat
    Glass Bubbles
    Contact adhesive
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

22x12 Falcon electric
105.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

3 x	Motor A2212/13T
2 x	ABS angle 6,0x6,0x1000 mm
2 x	Profile ABS half cane 4x2.5x1000 mm
2 x	ABS rectangular profile 12x6.0x1000 mm
1 x	Straightened rod Ø 0.5 mm x 1000 mm
1 x	Medidor ángulos y/o incidencias
1 x	Truck-trailer for gliders 720 x 239 mm
1 x	Extension 100 cm (Futaba)
1 x	Carbon fiber rod 4.0 mmx1000 mm
1 x	Extension 90 cm (Futaba)
1 x	Carbon rectangular rod 10.0 mm x 1.0 x 1000 mm
1 x	Propeller balancer
1 x	Carbon fiber rod 10 mm x 1000 mm
1 x	Carbon fiber rod 7.0 mmx1000 mm
1 x	Carbon fiber rod 2.5 mmx1000 mm
1 x	Carbon fiber flat 1000x3.0x0.5 mm
1 x	200 mm extensión servo HITEC/JR
1 x	Carbon fiber rod 6.0 mmx1000 mm
1 x	Extension silicon 50 cm (Futaba)
1 x	Cable S.BUS 3 salidas 300 mm
1 x	Cabel "Y" 30 cm (graupner)
1 x	Extension lead 15 cm Multiplex
1 x	Xoar Electric Beechwood Prop 22x10
1 x	Cable tie mounts 4.3 (4 uds)
1 x	Allen wheel collar M3x3
1 x	Cabin latch Fox MDM1 4m (pair)
1 x	280 cc gasoline fuel tank complet
1 x	Foaming agent for epoxy resins 200 g
1 x	Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m
1 x	CA Glue fast 20g
1 x	Ball Bearing Oil 25 ml
1 x	Birch plywood plate 600x300x2.5 mm
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs)
1 x	Aluminium cap bolt washer M4 red (8 pcs)
1 x	aluminium servo arm V2-JR 2,0 inch M3
1 x	12 mm floating pad (49 pcs)
1 x	10 mm Quick clamp_L (6 pcs)
1 x	Aluminium cap bolt washer M3 green (8 pcs)
1 x	6 mm Quick clamp_S (10 pcs)
1 x	ABS "T" angle 8.0x8.0x1000 mm
1 x	Profile ABS Square 1 x 1000 mm
1 x	Profile ABS triangular 2.0x1000 mm 90º
1 x	ABS rectangular profile 10x5.0x1000 mm
1 x	ABS "T" angle 6.0x6.0x1000 mm
1 x	ABS angle 10,0x10,0x1000 mm
1 x	Profile ABS triangular 6.0x1000 mm 90º
1 x	ABS "T" angle 10.0x10.0x1000 mm
1 x	Profile ABS half cane 3x1000 mm
1 x	ABS angle 4,0x4,0x1000 mm
1 x	ABS angle 2,0x2,0x1000 mm
1 x	Streamline Stainless Steel Tubing 10.5x5.7x1000 m
1 x	Aluminium rod Ø 4.0 mm x 3000 mm
1 x	Straightened rod Ø 1.2 mm x 1500 mm
1 x	Straightened rod Ø 14.0 mm x 1000 mm
1 x	Straightened rod Ø 8.0 mm x 1000 mm
1 x	Cabel "Y" 30 cm (Futaba)
1 x	Carbon fiber rod 1.5 mm x 1000 mm
1 x	Extension silicon 25 cm (Futaba)
1 x	Carbon fiber rod 1.0 mm x 1000 mm
1 x	800TVL CMOS camera for FPV
1 x	Carbon fiber rod 16 mm x 1000 mm
1 x	Squared carbon wing joinner 5x5x220 mm
2 x	11 mm Rubber pads (14 pcs)
1 x	Aluminun wheel collar 6 mm Ø (4 uds)
1 x	Allen wheel collar M4x6
1 x	PT 21x13 EL Propeller 3 Blade
1 x	Clip fixing for wing (2 pcs)
1 x	Aluminium alloy coupler for carbon tube 6/M4
1 x	Aluminun wheel collar 4 mm Ø (4 uds)
1 x	Ferrita 14x8x5.5 mm
1 x	100 mm rods + T patellas set for direction control
1 x	Aluminun wheel collar 2.5 mm Ø (4 uds)
1 x	Epoxy L 40 min. 10 kg (Resin)
1 x	Hardener EPIKURE™ Curing Agent MGS™ LH285, bottle/ 800 g
1 x	Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m
1 x	Conector MR-60 (pareja)
1 x	Cyanocrylate MD GA460 odourless 20g
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m
1 x	Brazo servo KAVAN doble aluminio 25T - 2.5" M3
1 x	Crawler GRE-24 RTR 1:24 Arena
1 x	Aluminium wide washer M3 blue (4 pcs)
1 x	aluminium servo arm V1-JR 1,0 inch M2
1 x	Profile ABS half cane 2.0x1000 mm
1 x	ABS angle 5,0x5,0x1000 mm
1 x	Cross Connector 4.0 mm x 1000 mm
1 x	Rubber profile 10-2 mm 2M
1 x	ABS angle 1.5x1.5x1000 mm
1 x	ABS "T" angle 4.0x4.0x1000 mm
1 x	L-Connector 1.0 mm x 1000 mm
1 x	Profile ABS half cane 8.0x1000 mm
1 x	Profile ABS half cane 5.0x1000 mm
1 x	Flat Connector 4.0 mm x 1000 mm
1 x	L-Connector 4.0 mm x 1000 mm
1 x	Profile ABS Square 3 x 1000 mm
1 x	Straightened rod Ø 1.0 mm x 1000 mm
1 x	Straightened threaded rod M3 - 1m
1 x	Straightened rod Ø 2.5 mm x 1000 mm
1 x	Straightened rod Ø 4.5 mm x 1000 mm
1 x	Carbon fiber rod 1.5 mm x 2000 mm
1 x	Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm
1 x	Carbon fiber rod 12 mm x 1000 mm
1 x	Extension silicon 30 cm female (Graupner)
1 x	Extension silicon 35 cm (Futaba)
1 x	Extension silicon 25 cm (Graupner)
1 x	Extension 15 cm (Futaba)
1 x	Field folding model stand SebArt
1 x	Extension silicon 75 cm (Futaba)
1 x	Cable silicona macho batt. receptor 30 cm (Futaba)
1 x	USB Mini Camera endoscope
1 x	Carbon wing joinner 13,4 mm Ø 0,48 mm
1 x	Carbon fiber rod 20 mmx1000 mm
1 x	Extension silicon 100 cm (Graupner)
1 x	0,14 mm PVC servo wire extension, ZH micro conector.
1 x	Carbon fiber rod 14 mmx1000 mm
1 x	Extension silicon 10 cm (Futaba)
1 x	WingFix ULTRA Black Edition
1 x	Extension PVC 150 cm (Graupner)
1 x	Extension 30 cm (Futaba)
1 x	Carbon fiber rod 8.0 mmx1000 mm
1 x	Extension 7.5 cm
1 x	Carbon fiber rod 0.5 mmx1000 mm
1 x	Propeller balancer
1 x	Extension silicon 75 cm (Graupner)
1 x	Extension silicon 30 cm female (Futaba)
1 x	Futaba Female 40 cm extension
1 x	Carbon fiber flat 1000x6.0x0.8 mm
1 x	Extension silicon 10 cm (Graupner)
1 x	Cable S.BUS 3 salidas 100 mm
1 x	Extension S-Bus 1-2 silicon 30 cm FUTABA
1 x	Extension silicon 50 cm (Graupner)
1 x	Futaba Female 40 cm extension
1 x	Truck-trailer for gliders 720 x 285 mm
1 x	Extension S-Bus 1-2 silicon 120 cm FUTABA
1 x	Angle measurer
1 x	Surface Indicator Gauge Small
1 x	Premium servo extension 100cm
1 x	Carbon fiber rod 5.0 mmx1000 mm
1 x	Field folding model stand
1 x	Cable silicona macho batt. receptor 30 cm (Graupner)
1 x	Carbon fiber rod 2.0 mmx1000 mm
1 x	Cabel "Y" 15 cm
1 x	Extension silicon 30 cm male (Futaba)
1 x	PT 16x10 E Propeller
1 x	80 mm rods set for direction control
1 x	Aluminun wheel collar 3 mm Ø (4 uds)
1 x	Cable grommet Ø 5 mm (4 uds)
1 x	Cable grommet 9.5 mm (4 uds)
1 x	Allen wheel collar M4x4
1 x	Epoxy QUIK-CURE™ 5 min (130g)
1 x	Aluminun wheel collar 5 mm Ø (4 uds)
1 x	PT 22x10 EL Propeller
1 x	Ventus 1:4 set of instruments
1 x	Xoar Electric Beechwood Prop 21x10
1 x	Canopy Latch
1 x	Allen wheel collar M3x5
1 x	38x4,5 mm wires output (2 pcs)
1 x	Canopy Lock V1 M3 Blue (2 pcs)
1 x	100 mm rods set for direction control
1 x	Epoxy SLOW-CURE™ 30 min (130g)
1 x	Jeti Black cap
1 x	Cap closure 33/23.5mm (2 uds)
1 x	Xoar Electric Beechwood Prop 16x7
1 x	Xoar Electric Beechwood Prop 15x8
1 x	Ferrita con funda
1 x	Xoar Electric Beechwood Prop 24x8
1 x	PT 21x13 EL Propeller
1 x	Xoar Electric Beechwood Prop 20x10
1 x	Ferrita 17x10x6.5 mm
1 x	Cierre cabina aluminio Ø5, I=16 mm
1 x	Epoxy SLOW-CURE™ 30 min (260g)
1 x	Cable grommet Ø 6.4 mm (4 uds)
1 x	140 mm rods + T patellas set for direction control
1 x	Ferrita 27x14x7 mm
1 x	Canopy Lock V1 M3 Red (2 pcs)
1 x	Cable grommet Ø 3.2 mm (4 uds)
1 x	90 mm rods + T patellas set for direction control
1 x	Cierre cabina aluminio Ø4, I=10 mm
1 x	41x5,5 mm wires output (2 pcs)
1 x	250 mm / 16 mm Airbrakes
1 x	Epoxy FINISH-CURE™ 20 min (130g)
1 x	140 mm rods set for direction control
1 x	PT 20x13 EL Propeller
1 x	45 mm rods + T patellas set for direction control
1 x	Epoxy L 40 min. (1 Kg) 715g Resina / 285g Hardener S (15 min)
1 x	UHU hart 35 g
1 x	Alignment dowels (2 parts, outer-Ø 8 mm) bag/ 100 pairs
1 x
1 x	Epoxy 40 min. 4kg (Hardener)
1 x	Epoxy Resin L 285 + Hardener 386, kit/ 1.35 kg
1 x	152x46 Ø6.0 mm aluminium core wheel
1 x	resin-hardener package L-385 with hardener H-385 (875 g)
1 x	102x26 Ø6.0 mm aluminium core wheel
1 x	resin-hardener L-385 H-385 (625 g)
1 x	FOAM - CURE™ (24g)
1 x	1/12 Pilot "Langley"
1 x	MEKP Harderner 100 g

3,320.74EUR