13.00EUR


[R2101351]


Carbon fibre milled
Yields lightweight, hard filling compouds
For epoxy, polyester, and vinyl ester resins
Milled carbon is made from recycled fibres. The carbon fibres used therefore are equipped largely with PU-sizing. Most of the sizing evaporates due heat generated at the milling process though. When dry the milled fibres form fibre balls, which dissolve and spread out evenly in resin.

Technical Data*:
Carbon fibres content: 100 % (99 %)
including ex-PAN fibres: > 90 %
Carbon content: 94 % (92 %)
Density (g/m³): 1.7 < d < 2.0
Monofilament diameter: 7 µm ± 2
Volume resistivity (average volume resistivity of n (n > 1000) monofilaments): 15 µΩm (max. 20)
Tensile strength: 3500 MPa (3000)
Elongation at break: 1.5 % (1,2)
Tensile modulus: 230 GPa
Median length: 200 µm ± 30

Application:
Manufacture of electrically conductive coatings and adhesives, reinforcement of moulding and fillings.
*Average values obtained from technical data sheets of producers of ex-PAN ‘‘high strength’’ fibres that we use in our mixture for more than 90 %. The ≤ 10 % remaining are ‘‘high modulus’’ fibres from the same producers, i.e. TORAYCA®, TOHO-TENAX, CYTEC... All these values are given as a rough guide.


few units
few units

Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Baseplate servo
1 x Xplorer1 anemometro
1 x ABS tube 20.0x18.0x1000 mm
1 x Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm)
1 x ABS tube 6.0x4.0x1000 mm
1 x Starter 12v (Max 90 and 15ccm)
1 x Xplorer4 anemometro
1 x Silicone adhesive ELASTOSIL® E4, tube/ 90 ml
1 x ABS tube 14.0x10.0x1000 mm
1 x CC 01
1 x Glases Stratus
1 x Ball link Aluminio M3 (2 pcs)
1 x DUPLEX USBa USB-Adapter for Jeti Duplex Items
1 x Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds)
1 x Plasti Dip Liquid Tape 429 ml black
1 x Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm
1 x Black copper lacquer wire Ø0,2 mm (5 m)
1 x Spray Graphit 33
1 x Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds)
1 x ABS tube 16.0x14.0x1000 mm
1 x CC 05
1 x Dean "T" - Futaba Adapter
1 x Steel tube (L 1000 mm Ø4 mm, Ø3,7 mm)
1 x CellPRO 4S Adaptader (GP/KO up to 4S)
2 x Glases Nimbus "Black"
1 x 
1 x Spannlack 1000 ml
1 x Plasti Dip Liquid Tape 429 ml orange
1 x Steel tube (L 1000 mm Ø7 mm, Ø6,7 mm)
1 x Glases Flitemaster
1 x Hot Glue Stick BLACK
1 x Aluminium servo arm (2 uds)
1 x Oils Pumps Empty (1 liter)
1 x Carbon wing joinner 13,4 mm Ø 0,48 mm
1 x Z Bender - S Type Tool
1 x ABS tube 4.0x3.0x1000 mm
1 x Copper lacquer wire Ø0,2 mm (5 m)
1 x 1000 ml sealer (DOPE)
1 x Steel tube (L 1000 mm Ø3 mm, Ø2,7 mm)
1 x Field folding model stand SebArt
1 x Straightened threaded rod M3 - 1m
1 x Ring 320 mm length (5 pcs)
1 x Aluminium cap bolt washer M3 green (8 pcs)
1 x Flap hinge 33x9 mm (6 pcs)
1 x SE Ring HACKER 300 mm (2 pcs)
1 x Support XT60 conector (2 pcs)
1 x Aluminium wide washer M4 Blue (4 pcs)
1 x Locking cable tie 3.2x142 (uds)
1 x Straightened rod Ø 1.0 mm x 1000 mm
1 x 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x 67 mm cylidric hinge Ø 5 mm (4 pcs)
1 x 14x60 mm Mini rings Tie Wraps (4 pcs)
1 x Brass hexagonal rod Ø 3.5 mm x 1000 mm
1 x 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x Support Antena 2.4 Ghz (2 pcs)
1 x Straightened rod Ø 1.2 mm x 1500 mm
1 x 67 mm cylidric hinge Ø 4,5 mm (5 pcs)
1 x Extractor piñones 2.3/3.2 mm
1 x Brass rod Ø 1.0 mm x 1000 mm
1 x Pasacables rectangular 40x15 mm (4 pcs)
2 x Straightened rod Ø 4.5 mm x 1000 mm
1 x Support Flush MPX Conector (6 pcs)
1 x Rotorshape Autogyro
1 x JEEMO Kit ARF Basic (2 color) - XTRALIGHT
1 x MZ-18, 9 Channel HoTT
1 x JEEMO Kit ARF Basic (2 color Carbon finish) XTRALIGHT
1 x Set transmisions BULL Mo1 (dura/aluminium)
1 x Wing Joiner BULL MØ1 2.600mm
1 x Pipa 3D BULL MØ1 2.600mm
1 x SCHOCKJET ARF 2.050 mm
1 x Electric Landing Gear "Black Edition" ULTIMATUM 2.0 (Elektron Re
1 x 2000A 12V Lithium Jump Starter with 150PSI Air inflator
1 x Nylon hinge 20x20x0,3 (10 pcs)
1 x Socket Screw M3x9 mm
1 x Seoul Power LED 3 watts PCB Sets: 1x white, 1x red, 1x green
1 x Tip wing protector 30x10 (2 pcs)
1 x Lead with adhesive (2 pcs)
1 x Extension 7.5 cm
1 x Prolonguer for Balancer Thunder Power 6S
1 x Alignment dowels (2 parts, outer-Ø 8 mm) bag/ 100 pairs
1 x Hard brass tubing (L 1000 mm, Ø11.0 mm, Ø10.0 mm)
1 x SERVO S9177SV HV S-Bus2 Programable
1 x OPUS-V / Jet-CC-BF
1 x Servo NARO Max Std
1 x 65 mm mini servo cover
1 x Brass hexagonal rod Ø 3 mm x 1000 mm
1 x Brass hexagonal rod Ø 5 mm x 1000 mm
1 x Mould Resin P + Hardener EPH 161-P, kit/ 585 g
1 x White gelcoat 1 Kg
1 x Carbon tube 3K-PW (L 2000 mm, Ø25 mm, Ø22.5 mm)
1 x resin-hardener L-385 H-385 (625 g)
1 x 8Wx2 Gears-Spotlight, UltraPower, 20mm White
1 x SBEC 30 D
1 x Hard brass tubing (L 1000 mm, Ø5.0 mm, Ø4.1 mm)
1 x SPS 70V 140/280 A
1 x Extension 2/3 lipos JST - JST/C
1 x UBEC 6A KAVAN
1 x 8Wx2 Navigation & Strobe, 11mm Green/White
1 x Epoxy Resin L 285 + Hardener 386, kit/ 675g
1 x Hardener Aero EPH 161 (500 g)
1 x Glases Aspen
1 x SBEC 40
1 x resin-hardener L-385 H-385 (1250 g)
1 x Multi-adapter balancer JST/C - TP
1 x Set luces Airliner 2.1m Wingspan Scale 1:14 Civil/Sport
1 x Glases Moritz
1 x resin-hardener L-385 H-385 (5000 g)
1 x Male Prolonger TP 4/5S
1 x PSC 6
1 x 3x8W Triple-Spotlight, 12mm, T-Fuse White
1 x 4Wx2 Power Navigation Light, 13mm, T-Fuse White
1 x SBEC Jeti
1 x Extension 5 lipos JST - JST/C
1 x Tester LiPo/LiIon/LiMn/LiFe
1 x 6 mm Prop Adapter M8
1 x Heat-conducting adhesive (2x2ml), WLK DK 4
1 x 3 mm Short Prop Adapter M5
1 x Servo arms set HS-65HB/MG/5065MG
1 x Servo DL3017 Digi 17Kg-0.15s/60º
10,757.86EUR
Manufacturers
Manufacturer Info
R-G.de
R-G.de Homepage
Other products
Languages
Español English
Currencies