Top » Catalog » Hardware » Adhesives/Resin/Epoxy » Resin/Gelcoat » R1001350

50.00EUR

Epoxy Resin L (2.5 Kg)
[R1001350]

Resin-hardener package L-385 with hardener H-385

General information about the system Epoxy Resin L with different hardeners

Low viscosity, free of solvents and fillers
Fast impregnation of glass, aramid, and carbon fibres
High static and dynamic strength
Epoxy Resin L with the corresponding hardeners is the most commonly used laminating and adhesive resin in the R&G delivery programme.

In conjunction with the Hardeners S (15 minutes), L (40 minutes), CL (60 minutes), EPH 500 (60 minutes), EPH 161 (90 minutes), W 300 (300 minutes), GL 1 (30 minutes) and GL 2 (210 minutes), this epoxy resin exhibits similar mechanical properties to those of the laminating systems usual aerospace .Its heat deflection temperature reaches from 60 °C (S, L, EPH 500, W 300), to 80 °C (GL 1 and GL 2, after post-curing), to 95 °C (CL, after post-curing) and finally to 120 °C (EPH 161, after post-curing).

Epoxy Resin L has a low viscosity, is free of solvents and fillers, and ideal for impregnating glass, aramid, and carbon fibres. Its low surface tension, good adhesion, and minimal curing shrinkage makes it ideal for bonding wood, metal, foamed polystyrene, etc. It can be processed in all of the customary methods, e.g. hand lay-up operations, pressure and vacuum impregnation, press moulding, winding, etc.

The well-proven R&G Epoxy Resin L in combination with Hardeners GL 1 and GL 2 offer an approval by the Germanische Lloyd for the construction of boats and rotor blades for wind turbines.
Expertise for the resin systems Epoxy Resin L + Hardener S, Epoxy Resin L + Hardener L, Epoxy Resin L + Hardener CL and Epoxy Resin L + Hardener EPH 500: these are not cytotoxic (cell damaging), important for applications in medical purposes.
Laminate structures for vehicle construction in combination with Hardener EPH 161 are approved by the TÜV-Süd (Document available in german language only).

under request

Reviews

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
    Cianocrylate->
    Epoxy->
    Resin/Gelcoat
    Glass Bubbles
    Contact adhesive
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

DUPLEX case for Jeti DS handheld transmitter
54.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

3 x	Parachute BACKUP X100
3 x	Parachute PV6 for F3J
3 x	Paramotor Kit Camo H1.5/ Ben Red
1 x	Propeller balancer
2 x	LUCAS pilot ARTF
1 x	Opale Rucksack
1 x	Wing OXY 0,5 pulgadas2
1 x	Windsock Ozone L - 700 mm
1 x	WingFix ULTRA Black Edition
1 x	Trike XL motor set (motor+esc+prop)
1 x	Angle measurer
1 x	Paramotor BackPack XXS (without accessories)
2 x	Angle of incidence meter
1 x	Truck-trailer for gliders 720 x 285 mm
2 x	Surface Indicator Gauge Small
3 x	Para-RC Mix
3 x	Paramotor Trike XL
1 x	Aramid 50 daN 50 m
1 x	Para-RC Trike "RC-Bullix"
2 x	Paramotor BackPack XXS 2
2 x	Medidor ángulos y/o incidencias
2 x	Field folding model stand SebArt
1 x	Big-Malibu XL Roof box with surfboard rack GREY
1 x	Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs)
2 x	Streamline Stainless Steel Tubing 19.5x9.8x1000 mm
1 x	20x200 mm battery rings
2 x	2000A 12V Lithium Jump Starter with 150PSI Air inflator
1 x	Cross Connector 4.0 mm x 1000 mm
2 x	Tape GFK 50 mm
1 x	14x60 mm Mini rings Tie Wraps (4 pcs)
1 x	Streamline Stainless Steel Tubing 10.5x5.7x1000 m
1 x	ABS "T" angle 4.0x4.0x1000 mm
2 x	Foil for sticking flaps and ailerons
1 x	10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
2 x	ABS angle 5,0x5,0x1000 mm
1 x	SE Ring 450 mm (2 pcs)
1 x	Profile ABS Square 4 x 1000 mm
2 x	SE Ring 300 mm (2 pcs)
1 x	Profile ABS Square 1 x 1000 mm
3 x	Servo NARO Max Std
3 x	Tape GFK 25 mm
1 x	26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	L-Connector 1.5 mm x 1000 mm
1 x	Marker ties (20 pcs)
1 x	Streamline Stainless Steel Tubing 12.3x7.7x1000 mm
1 x	Streamline Stainless Steel Tubing 7.5x4.5x1000 mm
1 x	Streamline Stainless Steel Tubing 15.5x8.5x1000 mm
2 x	ABS angle 1.5x1.5x1000 mm
1 x	Tube Pitot to PIXHAWK
1 x	PIX Hawk with accesories
1 x	PPM Encoder Module
1 x	Oracover Black 2 m
1 x	Oracover CARBON Metalic 1 m
1 x	Ply-Span 450x600/13g White
1 x	MYLAR film A350 (1000x500 mm)
1 x	Papel japones 12 grs/m2 760x510 mm JAPICO
1 x	Oracover Red 2 m
1 x	Oracover Verde 2 m
1 x	ORACOVER transparent Yellow (10 m)
1 x	ORACOVER Fluor red (2 m)
1 x	Ply-Span 450x600/13g Orange
1 x	Monokote PLATINO metalizado (1.8x0.65m)
1 x	MPX Sub-D Adaptor
1 x	Aluminium cap bolt washer M3 green (8 pcs)
1 x	Lock washer 2.7 mm (20 pcs)
1 x	Flat washer 4.3 mm (20 pcs)
1 x	Towing hook <3m
1 x	Long ball link M2 (6 uds)
1 x	White smoke canister 65 g
1 x	Initior Transmitter FTX2 Wireless
1 x	Blue smoke canister 140 g
1 x	Glases Nimbus "Black"
1 x	Carbon rectangular rod 10.0 mm x 1.0 x 1000 mm
1 x	Propeller mounting nuts Black / Silver Rocket 400 or Phatom simi
1 x	Windsock Ozone L -1200 mm
1 x	Ballast 700gr OPALE
3 x	Para-RC "RC-Evo-Cross" Rescue
1 x	3,2 mm Prop Adapter M5
1 x	3 mm Short Prop Adapter M5
1 x	Screw-lock connector Ø 2 mm (2 uds)
1 x	Steering arm 12 mm Ø 4 mm
2 x	PVC blue transparent battery termo-retract 95 mm (1 m)
1 x	PVC termo-retract battery 45 mm black transparent (1 m)
1 x	4 mm Prop Adapter M8
1 x	3.2 mm Prop Adapter M6
1 x	2 mm Prop Adapter M6
1 x	Prop Shaft Adapter 8 mm/M12 "long"
2 x	4 mm Prop Adapter M6
1 x	Prop Shaft Adapter 4 mm/M8 "long" 35 mm
1 x	Rescue 1,8m2 / BackPack
1 x	4 mm Prop Adapter M8
1 x	Parachute P4
1 x	3 mm Prop Adapter M6
1 x	3,2 mm Prop Adapter M6
3 x	3.17 mm Prop Adapter CN-Spinner
1 x	U Profile ABS 3,0x6,0x1000 mm
2 x
1 x	SE Ring 480 mm (2 pcs)
1 x	SE Ring 350 mm (2 pcs)
1 x	SE Ring 330 mm (4 pcs)
1 x	Rubber profile 10-2 mm 2M
1 x	Profile ABS Square 3 x 1000 mm
1 x	White gelcoat 1 Kg
2 x	Hardener P-25, canister 2.5Kg
1 x	Epoxy Resin L 285 + Hardener 386, kit/ 1.35 kg
1 x	Mould Resin P 10 kg
1 x	Profile ABS half cane 4x2.5x1000 mm
2 x	Ring 320 mm length (5 pcs)
1 x	ABS "T" angle 6.0x6.0x1000 mm
2 x	SE Ring 400 mm (2 pcs)
2 x	Pad self adhesive, up to 3mm / 0.12″, (10 pcs)
1 x	Streamline Stainless Steel Tubing 11.5x6.5x1000 m
1 x	Hovercraft sailcloth
1 x	ABS rectangular profile 10x5.0x1000 mm
1 x	ABS "T" angle 10.0x10.0x1000 mm
1 x	SE Ring 250 mm (2 pcs)
1 x	20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x
1 x	SUS wire 3m (nylon coated)
1 x	Oracover White 10 m
1 x	PVC yellow transparent battery termo-retract 68 mm (1 m)
1 x	Oracover Orange 2 m
2 x	3,2x1000 mm 2:1 black termoretract tube
1 x	2,4x1000 mm 2:1 green termoretract tube
1 x	2,4x1000 mm 2:1 red termoretract tube
1 x	Oracover CHROME 2m
1 x	6,4x1000 mm 2:1 black termoretract tube
1 x	1,2x1000 mm 2:1 red termoretract tube
1 x	6,4x1000 mm 2:1 green termoretract tube
1 x	Stainless steel cable Ø 0.52 mm - 15 kp (10 m)
1 x	1,6x1000 mm 2:1 red termoretract tube
1 x	PVC yellow transparent battery termo-retract 69 mm (10 m)
1 x	Micro screw-lock pushrod conn snap Ø 1 mm (2 uds)
1 x	ORACOVER Ferrari red (2 m)
1 x	LOWER TOW HOOK
1 x	Tube support Ø 6mm (10 pcs)
1 x	Support Filtro FESTO
1 x	9x4.7 * 22x12 carbon propeller
1 x	Recessed MPX connector support (6 pcs)
1 x	Soporte filtro FESTO (4 pcs)
2 x	Aro pasacable Ø25 mm (4 pcs)
2 x	Soporte grifo FESTO vertical (1 pcs)
2 x	Support pumb/filter Xicoy X45
1 x	MAX pilot ARTF
1 x	Support FUEL DOT V3
1 x	Aro pasacable Ø20 mm (4 pcs)
1 x	Angle support XT60 conector
1 x	Support XT60 conector (2 pcs)
1 x	SLICK 103" Red/Yellow/Black ARF (Color 2) 2630 mm
1 x	EDGE 540-A 105" (2660 mm)
1 x	SLICK 103" Yellow/Blue ARF (Color 2) 2630 mm
1 x	resin-hardener package L-385 with hardener H-385 (3.5 Kg)
1 x	3,2 mm Prop Adapter M8
1 x	3,2 mm Prop Adapter M6
1 x	13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
2 x	3 mm Prop Adapter M6
1 x	resin-hardener package L-385 with hardener H-385 (875 g)
1 x	MEKP Harderner 100 g
1 x	Epoxy Resin HT 2 + Hardener HT 2 (60 min) 1 kg
1 x	Profile ABS half cane 2.0x1000 mm
1 x	PVC transparent black termo-retract battery 185 mm (1 m)
1 x	Oratex Red Fokker 10 m
1 x	Ply-Span 450x600/13g Black
1 x	Oracover Yellow CADMIO 10 m
1 x	Oratex Antik 2m
1 x	Prop Shaft Adapter 6 mm/M8 "long" 35 mm
1 x	6 mm Prop Adapter M8
1 x	Waterproof adhesive tape, width 19mm, length 25m
1 x	20x1000 mm Ring Strap Back To Back
1 x	Steel tube (L 1000 mm Ø8 mm, Ø7,7 mm)
1 x	resin-hardener L-385 H-385 (625 g)
1 x	Hardener Aero EPH 161 (500 g)
1 x	Mould Resin P + Hardener EPH 161-P, kit/ 585 g
1 x	Epoxy Resin L 285 + Hardener 285 (Aero), kit/ 1 kg
1 x	resin-hardener L-385 H-385 (1250 g)
1 x	Epoxy Resin L 285 + Hardener 386, kit/ 675g
1 x	resin-hardener package L-385 with hardener H-385

18,962.40EUR