50.00EUR 15.90EUR

Mini-Pix Esc 15 Amp
[KON4002]


This products have a good performance and can ensure high efficiency (90% including when you're operatting under full gas avoiding overheating and flight time low) and competing with explosion engine's performance.

General features:
- Only for brushless motors.
- Soft start that rapidly rise up to the maximum power (providing security).
- RPM control for the velocities of drifts and the main rotor, great for travel in and out of the maneuvers.
- Auto-Programmable mode (APM) that automatically adjusts the variator to the radio's gas channel and sets the strength of stopping, and current and fast start limitations.
- Supply limitation.
- High performance microprocessor design thas controles the heat dissipation.
- Overheatting protection.
- Superflex high temperature cables.
- You can work with or without sensorizar engines.

Pix variator features:
- The new Pix variators are effective and low-cost; they're designed for brushless motors and replace Swing Kontronik series. The desig is entirely new. Compared with their predecessors, this variators have new and improved performance characteristics.

- The operation has been reduced to essentials things. Do not you know anything about timing / frequency? No matter; you don´t have to be an expert in engines to manage your Pix. Like their predecessors, the Pix variators, adapt themselves automatically to the engine. Thanks to their APM mode, there is no need to program it. You can concentrate on the basics: connecting the battery and fly! It's that easy!

- All variators come with a Pix Li-Po integrated that can turned on and off simply by pressing a button. In fact, a major goal in its design, was to build the variator optimized to work with rotary engines of a large number of poles like Kontronik Dancer.

- The Pix variators are an attractive alternative in cost, compared to Jazz Kontronik if you do not want any specific function such as strong BEC, unlimited partial load condition or high voltage input.

- Moreover, now the PIX drives are programmed through the interface ProgCARD.


few units
few units

Reviews

Customers who bought this product also purchased
AXI2203/40 VPP
AXI2203/40 VPP

few units
few units

Propeller Pleg CAM Carbon 6x3
Propeller Pleg CAM Carbon 6x3

few units
few units

Categories
* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
  
  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
    Brushless->
      Aero-Naut
      Hacker
      Jeti->
      KAVAN
      Kontronik->
        Accesorios
      MGM
      Otros
      RIPMAX
      ROI-Import
      Top Model
      YGE
    Brushed
    Program Cards
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Stainless steel cable Ø 0.52 mm - 15 kp (10 m)
2 x Stainless steel cable Ø 0.5 mm (10 m)
1 x Steering arm 16 mm Ø 4 mm (2 uds)
1 x Aluminium alloy coupler for carbon tube 6/M4
1 x Streamline Stainless Steel Tubing 9.0x5.0x1000 mm
1 x U Profile ABS 3,0x6,0x1000 mm
1 x Streamline Stainless Steel Tubing 15.5x8.5x1000 mm
1 x ABS "T" angle 2.0x2.0x1000 mm
1 x L-Connector 4.0 mm x 1000 mm
1 x Streamline Stainless Steel Tubing 6.3x3.5x1000 mm
1 x Cabin latch Fox MDM1 4m (pair)
1 x U Profile ABS 8,0x4,0x1000 mm
1 x ABS "T" angle 10.0x10.0x1000 mm
1 x Canopy Lock V1 M3 Red (2 pcs)
1 x Electric spoiler 250 mm (2 pcs)
1 x Streamline Stainless Steel Tubing 10.5x5.7x1000 m
1 x Steering arm 12 mm Ø 4 mm (2 uds)
1 x ABS angle 1.5x1.5x1000 mm
2 x Locking cable tie 4.6x203 (uds)
1 x ABS "T" angle 8.0x8.0x1000 mm
1 x Vertical cockpit anchor "tipe F3A" (2 pcs)
1 x One touch canopy lock
1 x Profile ABS half cane 2.5x1000 mm
1 x Steering arm 12 mm Ø 3 mm (2 uds)
1 x U Profile ABS 2,0x4,0x1000 mm
1 x Streamline Stainless Steel Tubing 12.3x7.7x1000 mm
1 x Crimping sleeves for cable 1.3 mm (10 pcs)
1 x Steering arm 16 mm Ø 4 mm
1 x T-Connector 4.0 mm x 1000 mm
1 x L cockpit anchor "tipe F3A" (2 pcs)
1 x Locking cable tie 3.2x142 (uds)
1 x ABS angle 4,0x4,0x1000 mm
3 x Stainless steel cable Ø 0.88 mm - 60 kp (10 m)
1 x U Profile ABS 1,0x2,0x1000 mm
1 x Profile ABS Square 3 x 1000 mm
1 x Streamline Stainless Steel Tubing 11.5x6.5x1000 m
1 x Streamline Stainless Steel Tubing 14.5x9.6x1000 mm
1 x L-Connector 1.0 mm x 1000 mm
2 x Crimping sleeves for cable 0.70 mm (10 pcs)
1 x Stainless steel cable Ø 0.5 mm (20 m)
1 x ABS "T" angle 4.0x4.0x1000 mm
1 x ABS angle 6,0x6,0x1000 mm
1 x ABS angle 3,0x3,0x1000 mm
1 x Profile ABS half cane 2.0x1000 mm
1 x Covered closure or fairings
1 x Stainless steel cable Ø 0.5 mm (2 m)
1 x Screw-lock connector Ø 2 mm (2 uds)
1 x Streamline Stainless Steel Tubing 7.5x4.5x1000 mm
1 x ABS "T" angle 6.0x6.0x1000 mm
1 x Canopy Latch
2 x Micro screw-lock pushrod conn snap Ø 1 mm (2 uds)
1 x Steering arm 16 mm Ø 3 mm
1 x Screw-lock connector M2 (2 uds)
1 x SUS wire 3m (nylon coated)
1 x U Profile ABS 5,0x10,0x1000 mm
1 x Cierre cabina aluminio Ø5, I=16 mm
1 x 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x 20x1000 mm Ring Strap Back To Back
1 x Tape GFK 50 mm
1 x Pilot WWII US Navy Pacific 12" Scale 1/6-1/5
1 x 1/6 Pilot "Tony"
1 x Civilian pilot "Curt" size 9cm (Slimline)
1 x Pilot "Dick" Legends Series (Slimline)
2 x Pilot JAN 1/4 Saiplanes
1 x Civilian pilot "Pamela" size 9cm (Slimline)
1 x Pilot "Duke" Legends Series (Slimline)
1 x Threaded coupler M3 (10 uds)
1 x Kwik link AL M3 L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x Clevis plastico I=30 mm / hole 2.5mm / pin 1 (2 pcs)
1 x Ball link duraluminium M3 V1 (10 pcs)
2 x Aluminium coupler M2,5/2 with ball bearing (1 pcs)
1 x Threaded coupler ALU M3 Ø 4 (2 uds)
2 x Z type of cable coupler Ø 1 (2 uds)
1 x Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds)
1 x Threaded coupler ALU M2,5 Ø 6 (2 uds)
1 x Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds)
1 x Threaded coupler M2 (10 uds)
1 x Ball Link ALU M3 - RH (1 pcs)
1 x Threaded coupler Micro M2 Ø 0,8 mm (10 pcs)
1 x Aluminium blue ball links M3 V1 (10 pcs)
1 x Couple M4 for wire (10 pcs)
1 x Kwik link AL M3 con Clip (2 pcs)
1 x Threaded coupler ALU M2 Ø 4 (2 uds)
2 x Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs)
1 x Threaded coupler ALU M2,5 Ø 3 (2 uds)
1 x Ball link Aluminio M3 (2 pcs)
1 x Threaded coupler M2,5 Ø 3 mm (10 pcs)
1 x Ball link V1 Ø7 M4/3 (6 uds)
1 x Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm
1 x Threaded coupler M2,5 Ø 2 mm (10 pcs)
1 x Carbon fiber rod 2.5 mmx1000 mm
2 x Carbon fiber flat 1000x3.0x0.5 mm
1 x Carbon fiber rod 5.0 mmx1000 mm
1 x Carbon fiber rod 1.5 mm x 2000 mm
1 x Carbon fiber flat 1000x3.0x1.0 mm
2 x Carbon fiber flat 1000x3.0x1.0 mm
1 x Carbon fiber rod 1.0 mm x 1000 mm
1 x Carbon wing joinner 13,4 mm Ø 0,48 mm
1 x Carbon fiber rod 20 mmx1000 mm
1 x Horn 20x28,5 mm (2 pcs)
1 x Set cintas unión paracaídas 145 cm
1 x Brass hexagonal rod Ø 3.5 mm x 1000 mm
1 x Snap pin for micro clevis (10 uds)
1 x Fully Threaded Steel Rod M2,0 (2 uds) 250mm
1 x Fully Threaded Steel Rod alumin 50 mm M3 (2 pcs)
1 x Steering arm 12 mm Ø 4 mm
1 x Allen wheel collar M4x6
1 x Snap long M2 (10 uds)
1 x Wheel collar 3 mm Ø (4 uds)
1 x Profile ABS half cane 4x1000 mm
1 x Cross Connector 4.0 mm x 1000 mm
1 x Carbon fiber flat 1000x6.0x0.8 mm
1 x ABS angle 10,0x10,0x1000 mm
1 x Cap closure 33/23.5mm (2 uds)
1 x Streamline Stainless Steel Tubing 19.5x9.8x1000 mm
2 x Screw-lock pushrod conn snap Ø 1.5 mm (2 uds)
1 x Carbon plate 350x150x1.0 mm
1 x Locking cable tie 2.5x100 (uds)
1 x 1/6 Pilot "Buddy"
1 x Civilian pilot "Joe" size 9cm (Slimline)
1 x Piloto Jet "Green" 1/6 Scale
1 x 1/12 Pilot "Langley"
1 x Set brocas Ø 2.0-2.2-2.4-2.6 mm (4 pcs)
1 x Sandpaper file 13 mm
1 x Fresa corte diamante Ø 1.4mm (bola)
1 x 2,5x60 mm allen screwdriver
1 x 25 mm Sandpaper file
1 x Male connector for 6 pines AWG
1 x 2 LiPo XH>EH adapter
1 x Spinner Alumin. fixed propeller 50 mm / 5,0 mm
1 x Spinner INOVA 102 mm Black
1 x 1/12 Pilot "Fighter"
1 x Pilot "Adolf" Legends Series (Slimline)
1 x Civilian pilot "G-Man" size 9cm (Slimline)
1 x Civilian pilot "Gramps" size 9cm (Slimline)
1 x Militarian pilot "Kamikaze" size 9cm (Slimline)
1 x Micro clevis (10 uds)
1 x Rubber bushing with bracket "B" type (2 pcs)
1 x Threaded coupler ALU M3 Ø 5 (2 uds)
1 x Pulley brass 10/2 (2 pcs)
1 x Pulley brass 16/2 (2 pcs)
1 x wire tensioner (red)
1 x Z type of cable coupler Ø 1.8 (2 uds)
2 x Carbon fiber rod 1.5 mm x 1000 mm
1 x Kwik link AL M4 con Clip (2 pcs)
1 x Angled clevis with threaded rod M3
1 x T-Motor MN705-S Kv125 (pack 2 uds)
1 x Carbon fiber rod 4.0 mmx1000 mm
1 x Carbon fiber rod 0.5 mmx1000 mm
1 x Aluminium coupler M2/2 with ball bearing (1 pcs)
1 x Black large kwik link (10 pcs)
1 x Carbon fiber rod 7.0 mmx1000 mm
1 x ESC ALPHA 60A HV
1 x Vest clothes Hispano Aviación
1 x Cap Hispano Aviación
1 x Softshell Hispano Aviación
1 x Sealing Iron Sleeve STD
1 x Ø 1,6 mm pin for Kwik link MPJ2150/2157 (6 pcs)
1 x Spinner INO 51 mm Chrome (Imitacion metal)
2,541.94EUR
Manufacturers
Manufacturer Info
KontroniK
KontroniK Homepage
Other products
Languages
Español English
Currencies