184.00EUR

Regulador KAVAN PRO-160HV Opto 160 Amp
[KAV3231055]


Regulador KAVAN PRO-160HV Opto 160 Amp
Programmable brushless ESC for big high-voltage (HV) aircraft models. Continuous current 160A (peak 200A), 6–14 LiPo cells power, OPTO (galvanically isolated control and power electronics). Weight: 221g; dimensions: 110x50x33mm. Programmable microprocessor ESC for brushless, sensorless AC motors ("brushless, sensorless") for hobby and sport aircraft models with LiPo/Li-ion/LiFe battery power supply. It uses advanced optimized control technology to significantly improve throttle response and power stage control efficiency. The ESC design takes into account the high long-term load capacity and durability required in giant models when powered by a high cell count battery. The power section of the ESC is galvanically isolated from the control electronics to provide high immunity to interference at high operating currents and high supply voltages. The ESC is not equipped with a BEC for the receiver and servos. A special KAVAN PRO LED programming card, which is supplied separately, is used to easily set up the ESC.
DESCRIPTION AND FUNCTIONS OF THE ESC
The ESC features a high-performance 32-bit ARM M4 microprocessor with a clock frequency of up to 72 MHz; it is compatible with most brushless motors.
Suitable for the vast majority of aircraft brushless motors powered by 6-14S LiPo/Li-ion/LiFe batteries.
Special power stabilizer for microprocessor for high interference immunity and reduced risk of loss of control.
Optimized control technology significantly improves throttle response and power stage control efficiency and reeduces ESC temperature.
Galvanically isolated power part by optoelectronic component.
Normal/Soft/Very Soft start-up modes are suitable for normal propeller aircraft and models with EDF.
Easy programming and setup using the transmitter or the KAVAN PRO LED programming card.
A special programming cable for connecting the ESC to the LED programming card allows the user to program the ESC anytime and anywhere (see the KAVAN PRO LED programming card manual for details).
Normal/Proportional/Reversal brake modes (especially reversal mode) can effectively shorten the range after landing.
A number of protection functions: start-up protection, thermal protection of the ESC, thermal protection of the capacitors, overload protection, overcurrent protection, abnormal supply voltage protection and control signal loss protection effectively extend the life of the ESC.
Calibrate the throttle range to perfectly match the control signal from your RC kit.

PROGRAMMABLE FUNCTIONS
Brake Type Brake off, normal brake (with braking intensity adjustable in 7 levels), proportional brake (controlled by the throttle control: 0-20% of throttle control deflection corresponds to 100-0% brake, 20-100% of control deflection corresponds to 0-100% throttle), reversing (allows to switch on the reversing of the motor running by another channel with a switch).
Brake Force: The braking intensity is adjustable from Level 1 to Level 7 for "Normal Brake" mode.
Cutoff type: Soft Cutoff: the contESCroller will gradually reduce power to 50% of full power within 3 seconds after voltage protection is activated. Hard Cutoff.
Number of LiPo cells: We recommend setting manually for 100% reliable voltage protection function. The ESC will automatically calculate the number of cells of the connected battery according to the "3.7 V per cell" rule if you select automatic detection.
Cutoff Voltage: The threshold level of the voltage protection is adjustable from 2.8 to 3.8 V/cell; the protection can also be switched off completely.
Start-up Mode: Normal start-up (instant start-up), Soft start-up (with slow start for motors with large propellers, gearbox or smaller EDF), Very soft start-up (with very slow start for motors with large propellers, gearbox or EDF from 90 mm).
Timming: Adjustable from 0-30°.
Motor direction: CW/CCW
DEO Freewheeling: This feature can be turned on or off; it can provide better linearity or smoother throttle response.

PROTECTIVE FUNCTIONS OF THE ESC
Start-up protection The ESC measures the motor speed during start-up. If the speed stops increasing or the increase is not stable, the ESC evaluates this as an incorrect start-up. If the throttle is at less than 15% at this point, the ESC will automatically attempt to restart the motor; if the throttle is at more than 15%, you must pull the throttle control all the way down to restart the motor.
Thermal protection of the ESC: The motor will "stall" if the ESC temperature exceeds 110°C, indicating that thermal protection has been activated. If the throttle control is pulled back below 60% at that point, the "stutter" will disappear and the ESC will deliver power appropriate to the throttle position. If you move the throttle above 60%, the "stutter" will reappear. The temperature of the ESC must not exceed 70°C when switching on, otherwise the engine cannot be started.
Signal loss protection The ESC will immediately shut down the motor if the signal is absent for 0.25 s to prevent even more damage and risks from a rapidly rotating rotor or propeller. Once a normal signal is received, the ESC resumes normal operation.
Overload protection The ESC switches off the motor or restarts automatically when its load suddenly increases to a very high value.
Overcurrent protection: The ESC immediately switches off the motor if the peak current draw exceeds the maximum permitted value; it then resumes normal operation. If the current draw still exceeds the maximum permitted value, the motor is switched off completely.
NOTE:The throttle cable of the ESC is the two-wire lead (white + black wire), the programming cable is the 3-wire lead (white + red + black wire). Connect ONLY the throttle cable to your receiver.
Tip: When the first time the regulator is switched on, first calibrate the throttle range according to the instructions. Only then can the ESC be used and other parameters set using the transmitter or the KAVAN PRO LED programming card.
Use: Airplane,helicopter
Type: brushless ; Current rate [A]: 160 ; Max. peak current [A]: 200 ; LiXX cells: 6 - 14 ; Lenght [mm]: 110 ; Width [mm]: 50 ; Height [mm]: 33 ; Weight [g]: 221 ; Regulation type: one-way ; Brzda: Yes ; Sensor input: No ; Programmable: Yes Used for Aeroplane,Helicopter Type AC Constant current [A] 160
Max. peak current [A] 200
LiXX cells 6 - 14
Length [mm] 110
Width [mm] 50
Height [mm] 33
Weight [g] 221
Control one-way
Brake Yes
Sensor imputs No
Programmable Yes


Comentarios
Categorías
* OFERTAS MES *
Aviones->
Veleros->
Autogiros->
Helicópteros->
UAVs - RPAs->
Multicópteros->
Accesorios->
  3D IMPRESION
  Actuadores
  Adaptadores->
  Altimetros->
  Amperímetros
  Anemómetros
  Auto-Pilot
  Banco pruebas
  Baterías->
  Bayonetas
  BEC/Cables/Conector/
Interrup

  Bisagras
  Cables
  Cajas de vuelo
  Camaras->
  Cargadores->
  Catalogos
  Catapultas/Bungees
  Centralitas/Registro de Datos->
  Cintas/Cierres/Bridas
  Combustible->
  Conectores
  Conos/Muletas->
  Emisoras/ Radios/Receptores->
  Extintores
  Extractores piñones
  Ferritas
  Fibra/Carbono/Planchas/Malla/ABS
  Fundas
  Gafas
  Hardware
  Helices->
  Herramientas
  Horns mando
  Humo/Cohetería/Pirotecnia
  Instrumentos/ Paneles
  Linkages/Clevis
  Luces/Iluminacion->
  Maderas/ Listones
  Merchandising
  Pegamentos/Resinas/Epoxy->
  Pegatinas
  Perfiles
  Pilotos
  Prolongadores
  Recubrimientos/Termorretráctil
  Reguladores / Variadores->
    Brushless->
      Aero-Naut
      Hacker
      Jeti->
      KAVAN
      Kontronik->
      MGM
      Otros
      RIPMAX
      ROI-Import
      Top Model
      YGE
    Escobillas
    Tarjetas Programadoras
  Remolque
  Rótulas
  Ruedas/Ejes->
  Servos->
  Simuladores
  Soportes/CG/Incidenc.
  Sprays/Pinturas/Barnices/Pastas
  Tornilleria
  Trenes de aterrizaje->
  Tubo Carbono/Latón/Acero/Alu
  Varilla Acero/Latón/Alum
  Varilla carbono
  Varillas-Listones ABS
Coches / Trucks->
Motores y Turbinas->
Motores Gas. Paramotores
Acces. para Motores->
Parapentes/Paracaídas/Mangas
Barcos/Unidades navales->
FPV->
Robots->
Corte CNC
Portaequipajes
Crash kits
Zona Outlet->
2ª Mano
Merchandising HA
Aceptamos
Búsqueda Rápida
 
Use palabras clave para encontrar el producto que busca.
Búsqueda Avanzada
1 x DUPLEX 2.4EX Central Box 210
1 x LASER 73" 1.85m (05) PILOT
1 x Hélice POWER-PROP 13x9 Izda
1 x Hélice POWER-PROP 13x9
1 x Hélice POWER-PROP 14x9 Izda
1 x Varilla acero Ø 14,0 mm x 1000 mm
1 x Brazo servo Aluminio 25T M3 KAVAN 6.5 / 19.6 mm
1 x TMM 2512-3S heli
2 x Perfil de ABS "T" 2.0x2.0x1000 mm
2 x Perfil de ABS cuadrado 3 x 1000 mm
1 x Depósito de gasolina de 1000 cc completo
1 x Pipa bujía DLE-111
1 x Bujía Saito 400
1 x Deposito combustible tipo "turbina" 330 ml
1 x Conector FESTO 6-6mm
2 x Perfil de ABS de media caña 2,0x1000 mm
1 x Canal de ABS de 5,0x10,0x1000 mm
2 x Perfil Acero Inox. 10.5x5.7x1000 mm
2 x Perfil de ABS "L" 10,0x10,0x1000 mm
2 x Perfil de ABS "T" 10.0x10.0x1000 mm
3 x Perfil de ABS "T" 8.0x8.0x1000 mm
3 x Perfil de ABS "L" 3,0x3,0x1000 mm
2 x Perfil de ABS "L" 6,0x6,0x1000 mm
2 x Perfil de ABS cuadrado 2 x 1000 mm
2 x Perfil Acero Inox. 19.5x9.8x1000 mm
1 x Depósito de gasolina de 1500 ccm completo extra fuerte
1 x Conector FESTO M5 Quick 4 mm
1 x Bujía motor OS Tipo F
1 x Bujía Champion RCJ-7Y para ZG
2 x Caja de válvulas DA 50-R
1 x GameCommander USB Universal
1 x Cable simulador USB multiplayer
1 x Servo NARO Max Std
1 x Kit motor ikarus indoor motor escobillas
1 x Helice Carbono 12.5x7
1 x Crimpadora
1 x Helice Carbono 13x7.5
1 x Helice Carbono 15x7
1 x Helice Carbono 11x8
1 x Helice Carbono 14x8
1 x Helice Carbono 18,5x12
1 x Helice Carbono 15x16
1 x Helice RF Carbono 13x7
1 x Helice Carbono 20x13 "blanca"
1 x Helice Carbono 14x6.5
1 x Carga cohete D3-P
1 x Bujía ROSSI R8
1 x Acople ALU M2,5 Ø 3 (2 uds)
1 x Tubo silicona transparente 7 x 3 mm (1m)
1 x Adaptador 2,3 mm M5 para cono 30 mm hélice fija.
1 x Acoplador de aluminio para tubo de carbono 6/M4
1 x Codo escape para SAITO FA65/72/80/82a/91S/100/
1 x Escape Pitts OS MAX.35.40 FP
1 x Escape O-ring Saito FG-73 5cyl
1 x Escape Pitts D.A. 70
1 x Extensión escape motor OS 120 AX
1 x FunCub NG verde RR
1 x Turbo Timber Evolution 1.5m PNP
1 x MAULE M-7-420 2.8m Rojo
1 x Cessna SKYLANE T182 1.75m - Seagull Model
1 x JOKER 3 1550mm
1 x CESSNA 50E White/Red
1 x Perfil goma 10-2 mm 2M
1 x Perfil de ABS rectangular 10x5,0x1000 mm
2 x Conector ABS "L" 1.0 mm x 1000 mm
2 x Conector ABS "H" 4.0 mm x 1000 mm
1 x Reductora STD motor 280 eje 2,0mm (4,5:1)
1 x Reductora BB motor 280 eje 2,0mm (4,1:1)
1 x Reductora BB motor 480 eje 3,2mm (4,1:1)
1 x Trompetilla admisión carburador WALBRO 20-80cc (azul)
1 x Cargador ISDT 608AC 200W
1 x Conector FESTO 3-3mm
1 x Pletinas nylon medianas anclaje tren aterrizaje (4 uds)
1 x Anclaje carenado ruedas Ø 3 mm (2 uds)
1 x Sandwich carbon + poplar 2mm + carbon 480x290 mm
1 x Refueling Cap V3 Black
1 x Cartuchos de humo AX-60 negro (5 pcs)
1 x Cartuchos de humo AX-60 blanco (5 pcs)
1 x Tubo carton cohete 50mm x 48mm x 250mm
1 x Bujía 1/4-32 Glow
1 x Pinza de cierre tubo 4-5 mm (4 pcs)
1 x Acople ALU Izda. M2,5 Ø 4 (2 uds)
1 x Tapón para depósito conversión Glow/Gasolina DUBRO
1 x Abrazadera 2.5x100 (20 uds)
1 x Abrazadera para tubo de teflón Ø29 mm ext (1 pcs)
1 x Escape Pitts en kit para CAP 21
1 x Junta humo metalica G30 (DLE30/DLE60)
1 x Junta humo metalica G55 (DLE55/DLE111/DLE222)
1 x DRACO 2.0m BNF
1 x DRACO 2.0m PNP
1 x Turbo Timber Evolution 1.5m BNF
1 x PARAGON Trainer 46-55 1580 mm
1 x SkyMaxx 1.550 mm (kit)
1 x WINGO 2 ARF
1 x FunCup XL RR
1 x DRACO 2.0m Tren aterrizaje
1 x DRACO 2.0m Helice 14.5x9 4-Blade
1 x BETA 1400 ARF Red
1 x DRACO 2.0m Set ruedas
1 x BETA 1400 RTF Red
1 x Perfil Acero Inox. 6.3x3.5x1000 mm
1 x Perfil de ABS "T" 4.0x4.0x1000 mm
1 x Perfil de ABS rectangular 12x6,0x1000 mm
1 x Perfil de ABS de media caña 4x1000 mm
1 x Perfil Acero Inox. 17.8x12.4x1000 mm
1 x Perfil de ABS de media caña 7,0x1000 mm
1 x Perfil Acero Inox. 12.3x7.7x1000 mm
1 x Canal de ABS de 3,0x6,0x1000 mm
2 x Perfil de ABS de media caña 2,5x1000 mm
1 x Perfil de ABS "L" 4,0x4,0x1000 mm
1 x Perfil de ABS "T" 6.0x6.0x1000 mm
1 x Perfil de ABS triangular 4.0x1000 mm 90º
1 x Perfil Acero Inox. 9.0x5.0x1000 mm
1 x Canal de ABS de 8,0x4,0x1000 mm
2 x Perfil de ABS "L" 5,0x5,0x1000 mm
1 x Perfil de ABS de media caña 4x2.5x1000 mm
1 x Conector ABS "CRUZ" 4.0 mm x 1000 mm
1 x Perfil de ABS cuadrado 4 x 1000 mm
1 x Canal de ABS de 2,0x4,0x1000 mm
1 x Perfil de ABS de media caña 6,0x1000 mm
1 x Perfil goma 6-2 mm 2M
1 x Conector ABS "L" 1.5 mm x 1000 mm
1 x Perfil de ABS triangular 6.0x1000 mm 90º
1 x Conector ABS "L" 4.0 mm x 1000 mm
1 x Perfil de ABS triangular 4.0x1000 mm 60º
1 x Perfil de ABS de media caña 8,0x1000 mm
1 x Conector ABS "T" 4.0 mm x 1000 mm
1 x Perfil Acero Inox. 14.5x9.6x1000 mm
1 x Perfil de ABS triangular 2.0x1000 mm 90º
1 x Perfil de ABS "L" 1.5x1.5x1000 mm
1 x Reductora BB motor 300 eje 2,0mm (5,0:1)
1 x Carburador para SAITO FG-36
1 x Trompetilla admisión carburador DA70 hasta 190 Engine(rojo)
1 x Conector FESTO "Y" 6-6-6 mm
2 x Soporte ventral para Speed 600
2 x Tarjeta programadora KAVAN
2 x Disipador motor tipo 150
1 x TMM 1210-3S heli
1 x Adaptador (GP/KO hasta 4S) para CellPRO 4S
1 x Soporte Motor AC 28/7
1 x Helice FALCON 20x9 carbono-gas
9,304.30EUR
Fabricantes
Información del Fabricante
Kavan
Otros productos
Idiomas
Español English
Monedas