1 x | Motor A2212/13T |
1 x | Brass hexagonal rod Ø 3 mm x 1000 mm |
1 x | Carbon fiber rod 10 mm x 1000 mm |
1 x | DPS Switch JR/JR |
1 x | Strip ABS 2.0x3.0x1000 mm |
1 x | ABS tube 4.0x2.0x1000 mm |
2 x | ABS tube 9.0x7.0x1000 mm |
1 x | 12 mm floating pad (49 pcs) |
1 x | 10 mm floating pad (72 pcs) |
3 x | 1/4 Pilot "Heidi" |
2 x | Dremel PERMAGRIT thin lime |
1 x | 5 LiPo XH>EH adapter |
3 x | Pilot "Dick" Legends Series (Slimline) |
1 x | ABS tube 7.0x6.0x1000 mm |
3 x | 1/4 Pilot "Mike" |
1 x | Dean "T" - Futaba Adapter |
2 x | Aluminium cap bolt washer M3 black (8 pcs) |
2 x | Anodized aluminium servo M4x5/8 screw (4 lilac pcs) |
4 x | Dremel PERMAGRIT 18 mm round lime |
1 x | Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm) |
1 x | ABS Strip 1.0x2.0x1000 mm |
1 x | Carbon tube (L 1000 mm, Ø16 mm, Ø12 mm) |
5 x | |
1 x | Carbon fibre tube -TAPERED- 3k-PW (10 x 5 x 0.3) x 880 mm |
1 x | Extension 100 cm (Futaba) |
1 x | Conector male bateria 1s Kavan/Walkera 10cm cable |
1 x | Wing tips support for AX-18/AX-60 (2 pcs) |
1 x | 3l Smoke oil |
1 x | 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs) |
1 x | Cable silicona female batt. receptor 30 cm (Futaba) |
1 x | Balsa panel 2.0x100x1000 mm |
1 x | Profile ABS half cane 5.0x1000 mm |
1 x | Support ECU Xicoy X-45 |
1 x | Support XT60 conector (2 pcs) |
1 x | Futaba Female 40 cm extension |
1 x | Connectors banna oro 3 mm (M/F) |
1 x | Support FUEL DOT V3 |
1 x | Cable silicona macho batt. receptor 30 cm (Futaba) |
1 x | Profile ABS triangular 4.0x1000 mm 60º |
1 x | Indoor hinge with servo arm integraded |
1 x | Balsa panel 5.0x100x1000 mm |
1 x | ABS "T" angle 8.0x8.0x1000 mm |
1 x | A/C quality beech plywood 1520x750x3.0 mm |
1 x | Conector BEC female (10 pcs) |
1 x | Balsa panel 10x100x1000 mm |
1 x | 67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
1 x | Smoke set "M" |
1 x | Cable silicona macho batt. receptor 30 cm (Graupner) |
2 x | Balsa panel 1.5x100x1000 mm |
1 x | Gates hinge |
1 x | Bag connector 2 mm |
1 x | Large flex hinge (12 uds) |
1 x | 38x4,5 mm wires output (2 pcs) |
2 x | Aluminun wheel collar 5 mm Ø (4 uds) |
1 x | Charger LiPo Charger4 |
1 x | Cable grommet 9.5 mm (4 uds) |
1 x | Cierre cabina aluminio Ø4, I=10 mm |
1 x | Cable grommet Ø 4 mm (4 uds) |
1 x | Clip mini fixing for wing (2 pcs) |
3 x | Beech dowels 2.0 x 1000 mm |
1 x | 80 mm rods set for direction control |
2 x | Aluminun wheel collar 3 mm Ø (4 uds) |
1 x | Adjustable brass horn threaded M3 |
1 x | Brass rod Ø 1.0 mm x 1000 mm |
1 x | Brass rod Ø 0.5 mm x 1000 mm |
1 x | 40 mm 1/4" Race propeller (rigth hydropropeller) |
1 x | Cable grommet Ø 6.4 mm (4 uds) |
1 x | Foam plastic plates (310x210x3 mm) |
1 x | 100 mm rods set for direction control |
1 x | Cierre cabina aluminio Ø5, I=16 mm |
1 x | Servo GO-13 MG 13g 2.8 Kg 0.12s/60º |
1 x | Servo GO-1070MG 40 kg.cm 0.10s/60º |
3 x | Piloto JET 1:3,5 |
2 x | 1/6 Pilot "Garry" |
3 x | Piloto RC Civil 1/5- 1/6 Scale 12" |
2 x | Mudguard for 140/165 mm wheels |
2 x | Vacuum pump 12 CFM |
1 x | Hard brass tubing (L 1000 mm, Ø2.0 mm, Ø1.2 mm) |
1 x | Starter Sullivan-STAR 601 |
1 x | Starter EM Gear Power 250 |
1 x | Hot Glue Stick GREEN |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø8 mm, Ø6 mm) |
3 x | Xplorer1 anemometro |
1 x | Aluminium cap bolt washer M4 blue (8 pcs) |
2 x | 55% silver electrodes (2 pcs) |
2 x | Fresa corte diamante Ø 1.4mm (bola) |
1 x | Blind nut M6 (4 pcs) |
1 x | Crimping tool |
1 x | Aluminium cap bolt washer M3 red (8 pcs) |
3 x | 3,0x60 mm allen screwdriver |
2 x | Dust collector for mould cleaning |
2 x | Fresa corte diamante Ø 2.35mm (lentil) |
2 x | Fabric scissors curved (offset handles), 16 cm / 6" length |
1 x | Fast'n EZ-CA-Hinge, lite (12 uds) |
1 x | Battery LiPo GRE18 600 mAh 7.4v |
1 x | Kavan Car 25% nitro 1l |
1 x | MB-339 Aermachi 84" ARF c/retractil electric |
1 x | Pine wood slat 10x10x1000 mm |
1 x | 43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs) |
4 x | Civilian pilot "G-Man" size 9cm (Slimline) |
3 x | 1/12 Pilot "Cougar" |
2 x | 1/6 Pilot "Tony" |
3 x | 1/12 Pilot "Langley" |
1 x | Carbon tube 3k-LW (L 2000 mm, Ø30 mm, Ø28 mm) |
2 x | Crimping tool |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø25 mm, Ø22.5 mm) |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø12 mm, Ø8 mm) |
1 x | Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø36 mm) |
2 x | Copier 2x20 cm pcs |
2 x | Wheel collar 5 mm Ø (4 uds) |
1 x | Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø37 mm) |
1 x | Carbon tube 3K-Matt (L 1000 mm, Ø25 mm, Ø23 mm) |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø30 mm, Ø26 mm) |
2 x | Digital precision scale up to 2000 g |
2 x | |
1 x | Hard brass tubing (L 1000 mm, Ø3.0 mm, Ø2.1 mm) |
2 x | 1,5x50 mm allen screwdriver |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø18 mm, Ø16 mm) |
2 x | Aluminun wheel collar 3.5 mm Ø (4 uds) |
1 x | Hard brass tubing (L 1000 mm, Ø18.0 mm, Ø16.0 mm) |
1 x | PROXXON - SANDING BELTS FOR BSL 220/E 180 GRIT (5 pcs) |
1 x | Wheel collar 4 mm Ø (4 uds) |
1 x | Hard brass tubing (L 1000 mm, Ø6.0 mm, Ø5.2 mm) |
2 x | Vacuum pump P1-N |
1 x | Hard brass tubing (L 1000 mm, Ø10.0 mm, Ø9.1 mm) |
1 x | Screwdriver for Hexagon 1,27mm |
1 x | Hot Glue Stick BLACK |
1 x | Digital scale up to 40 kg |
1 x | Starter 12v (Max 90 and 15ccm) |
3 x | Disposable Injector Bags (30x16cm) 100 pcs |
2 x | Ball Link Plier |
2 x | Z Bender - S Type Tool |
2 x | Z Bender - S Type Tool |
1 x | PROXXON - SILICON CARBIDE BELTS FOR BSL 220/E |
1 x | PROXXON - SANDING BELTS FOR BSL 220/E 80 GRIT (5 pcs) |
1 x | Hard brass tubing (L 1000 mm, Ø8.0 mm, Ø7.1 m) |
2 x | Wheel collar 2 mm Ø (4 uds) |
1 x | Carbon tube 3K-PW (L 2000 mm, Ø20 mm, Ø18 mm) |
1 x | Carbon tube 3K (L 1000 mm, Ø 8 mm, Ø 7 mm) |
2 x | Copier 5x20 cm pcs |
1 x | Hard brass tubing (L 1000 mm, Ø5.0 mm, Ø4.1 mm) |
1 x | Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø37 mm) |
1 x | Hard brass tubing (L 1000 mm, Ø4.0 mm, Ø3.1 mm) |
1 x | Hot Glue Stick RED |
1 x | Fiberglass tube 6/4x1000mm |
1 x | Connectors banna oro 3,5 mm (M/F) |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø12 mm, Ø8 mm) |
4 x | Aluminun wheel collar 4 mm Ø (4 uds) |
2 x | Screwdriver for Torx® TX8 |
1 x | Carbon tube 3K-PW (L 2000 mm, Ø14 mm, Ø12 mm) |
1 x | Hard brass tubing (L 1000 mm, Ø7.0 mm, Ø6.1 mm) |
1 x | Hard brass tubing (L 1000 mm, Ø8.0 mm, Ø6.1 m) |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø19 mm, Ø15 mm) |
1 x | Anodized aluminium servo M3x16 screw (4 red pcs) |
1 x | Anodized aluminium servo M4x5/8 screw (4 silver pcs) |
1 x | Anodized alum. M4x0,7x20 mm Flat Head screw (4 lilac pcs) |
2 x | UHU hart 35 g |
1 x | 2,5x60 mm allen screwdriver |
2 x | UHU Por 50ml/40g |
1 x | Fresa corte diamante Ø 2.35mm (flame) |
2 x | 22 mm Cut Disc Proxxon/Dremmel |
1 x | Anodized alum. M4x0,7x25 mm Button Head screw (4 blue pcs) |
1 x | Xplorer3 anemometro |
2 x | Ball Link Plier |
2 x | Boxed KIT OF 7 Rotary Burrs FINE |
1 x | Aluminium M2x12 mm screw (4 pcs) |
2 x | Pegamento Pu R 50g polyuretano |
1 x | Aluminium cap bolt washer M4 red (8 pcs) |
1 x | Anodized aluminium M3x0,5x20 mm Sokect Head screw (4 blue pcs) |
1 x | Aramid fibre shears Proton®, 21 cm / 8" length |
1 x | Aluminium wide washer M4 Gold (4 pcs) |
3 x | Xplorer4 anemometro |
2 x | Aluminium cap bolt washer M3 green (8 pcs) |
1 x | Anodized aluminium servo M4x5/8 screw (4 black pcs) |
1 x | Aluminium wide washer M3 gold (4 pcs) |
1 x | Fresa corte diamante Ø 1.0mm (bola) |
1 x | Aluminium wide washer M4 Black (4 pcs) |
1 x | Concave-Convex sandpaper file 13 mm |
2 x | Fabric scissors curved Premium, 16 cm / 6" length |
1 x | Anodized alum. M4x0,7x20 mm Button Head screw (4 dark blue pcs) |
3 x | Digital weight, angle and balance meter BASIC |
1 x | 15 mm floating pad (30 pcs) |
1 x | Extra Hard Titanium Herxagon Screwdrivers |
1 x | Blind nut M4 (4 pcs) |
1 x | 261 mm M4/M4 6.0x4.0 mm shaft ship |
1 x | Anodized aluminium M4x0,7x20 mm screw (4 blue pcs) |
2 x | Dremel 3000 130W |
1 x | Aluminium wide washer M3 red (4 pcs) |
1 x | Anodized alum. M4x0,7x20 mm Flat Head screw (4 blue pcs) |
3 x | Ventus 1:4 set of instruments |
2 x | PIX Hawk with accesories |
2 x | Digital Air Speed Sensor And Pitot Tube Set |
1 x | Tube Pitot to PIXHAWK |
1 x | PPM Encoder Module |
1 x | Universal Charging Lead - 500mm - 4mm to Glow Plug Igniter |
1 x | Fuel bottle 500 ccm |
1 x | Combo KAVAN PRO 3542-1150 + KAVAN PRO-80 SB |
1 x | Ciano KAVAN Thick 20g |
1 x | Servo Arm 25T M3 KAVAN 6.5 / 19.6 mm |
1 x | Plastic caps for AIR BURTS (30 pcs) |
1 x | Pin hinge 34x16 mm (10 uds) |
1 x | BETA 1400 RTF Red |
1 x | Charger SKY RC e680 |
1 x | Pin hinge 39x20 mm (10 uds) |
1 x | KAVAN CA Activator 150ml |
1 x | Gates hinge 30x16 mm (2 pcs) |
2 x | 67 mm cylidric hinge Ø 4,5 mm (5 pcs) |
1 x | Unmounted aluminium pin 6x98 mm (2 pcs) |
1 x | BALSA trip 3.0x3.0x1000 mm |
1 x | Pine wood slat 5.0x5.0x1000 mm |
1 x | Stickers-digit for marking |
2 x | BALSA trip 10x10x1000 mm |
1 x | Cylidric hinge 33 mm Ø 2 mm (5 pcs) |
1 x | Nylon hinge for flaps 33x9 (2 pcs) |
1 x | Nylon hinge 20x20x0,3 (10 pcs) |
1 x | Gates hinge aluminium (1 pcs) |
1 x | Nylon hinge 15x0,3 (10 pcs) |
1 x | Flap hinge 33x9 mm (6 pcs) |
1 x | Fully Threaded Steel Rod alumin 90 mm M2,5 (2 pcs) |
1 x | Pushrod octagone 3/2 |
1 x | Fully Threaded Steel Rod Duralumin 70 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 70 mm M3 (2 pcs) knurled |
1 x | Fully Threaded Steel Rod Duralumin 40 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 90 mm M3 (2 pcs) knurled |
1 x | Fully Threaded Steel Rod Duralumin 110 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 80 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod SUS303 70mm M3 (2 pcs) |
1 x | Threaded coupler M3 (10 uds) |
1 x | Threaded coupler ALU M3 Ø 6 (2 uds) |
1 x | Servo GO-12S70MG 20.5kg.cm 0.06s/60º |
1 x | CA Glue (medium) 20g |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m |
1 x | Couple M4 for wire (10 pcs) |
1 x | Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds) |
1 x | Carbon fabric 68 g/m² (style 493 aero, plain weave) 100 cm |
1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m |
2 x | Pilot "Goose" (Slimline) |
1 x | Militarian pilot "Kamikaze" size 9cm (Slimline) |
1 x | FALCON 29X9 CARBON PROPELLER (GAS) |
1 x | Propeller APC 10x4 Glow/Gas |
1 x | Propeller FALCON 5-BL 24x23.5 |
1 x | Spring lock washer 4.1 mm (20 pcs) |
1 x | Servo M2x7/16 screw (4 pcs) |
1 x | Threaded insert M5 (10 pcs) |
1 x | A/C quality beech plywood 600x300x0.8 mm |
1 x | Balsa panel 6.0x100x1000 mm |
1 x | Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm) |
1 x | DUPLEX MUI 50 Sensor |
1 x | DUPLEX 2.4EX MULi 6s M |
2 x | 1/10 Pilot "Jack" |
3 x | 1/12 Pilot "Tom" |
1 x | Pilot "Duke" Legends Series (Slimline) |
2 x | Pilot WWII US Navy Pacific 12" Scale 1/6-1/5 |
1 x | Piloto Jet "Green" 1/6 Scale |
1 x | ABS tube 3.0x2.0x330 mm |
1 x | Aluminun wheel collar 2 mm Ø (4 uds) |
1 x | ABS tube 3.0x1.0x1000 mm |
1 x | Propeller diller for DLE111 and DA85-150 |
1 x | HPP-21 PLUS PC Programmer for Hitec Digital Servos |
1 x | Heat Seal Iron |
1 x | Steel tube (L 1000 mm Ø9 mm, Ø8,7 mm) |
1 x | 24x10 BIELA Sport 3Bl propeller (3-blades) |
1 x | 23x10 BIELA propeller (4-blades) Scale |
1 x | FIALA Propeller 27x10 |
1 x | 29x12 prop Super Silence |
1 x | ABS tube 6.0x4.0x1000 mm |
1 x | Set fresas corte Vanadium Ø 2.3/2.35 mm (3 pcs) |
1 x | Fresa corte diamante Ø 2.3mm (bola) |
1 x | ABS tube 8.0x6.0x1000 mm |
1 x | 21x12D BIELA propeller (3-blades) |
2 x | Steel tube (L 1000 mm Ø12 mm, Ø11,7 mm) |
1 x | Propeller MEJLIK 29x10S |
1 x | Connectors banna oro 4 mm (M/F) (ultralight) |
2 x | Xplorer2 anemometro |
1 x | Adapter 3,2 mm M5 for spinner 30 mm fixed propeller |
1 x | Universal Filter |
1 x | Vacuum Connection VA 1 (for hose Ø 6 mm) |
1 x | Spinner NUT M6 |
1 x | Birch plywood plate 600x300x2.5 mm |
1 x | Crawler GRE-24 RTR 1:24 Arena |
1 x | |
1 x | Birch plywood plate 600x300x1.5 mm |
1 x | Carbon Fiber TeXtreme® 80 g/m² (plain) 100 cm, roll/ 10 m |
1 x | Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m |
1 x | Carbon fiber rod 1.5 mm x 2000 mm |
1 x | Buy Perforated film 145 cm / 50 m |
1 x | Civilian pilot "Curt" size 9cm (Slimline) |
1 x | Pilot JAN 1/4 Saiplanes |
2 x | 1/6 Pilot "Buddy" |
2 x | Piloto WWII USAAF 12" Scale 1/6 - 1/5 |
2 x | 1/10 Pilot "Jimmy" |
1 x | Propeller APC 15x8 Glow/Gas |
1 x | Tapping Screw M2.2x65 (10 pcs) |
1 x | Tapping Screw M2.2x9.5 (10 pcs) |
1 x | Propeller FOXY 34x12 2-Bl |
1 x | Servo M2x5/16 screw (4 pcs) |
1 x | A/C quality beech plywood 600x300x5.0 mm |
1 x | Heat-conducting adhesive (2x2ml), WLK DK 4 |
1 x | VARIO module Hott |
1 x | BALSA trip 6.0x6.0x1000 mm |
1 x | Beech dowels 3.0 x 1000 mm |
1 x | BALSA triangular 15x15x1000 mm |
1 x | MRPM-AC revolution sensor |
1 x | AddCAP 10AS capacitors |
3 x | Civilian pilot "Pamela" size 9cm (Slimline) |
1 x | Propeller drill jig DA 100/85/120/150/200 and VM 60-210 |
1 x | Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm) |
1 x | 3-blades 24x12 carbon prop Super Silence |
1 x | Micro Tarjeta SD Rapid Rush 16 GB |
1 x | ABS tube 12.0x10.0x1000 mm |
1 x | 17x8 BIELA propeller |
1 x | Propeller MEJLIK 32x12 EVO |
1 x | Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm) |
1 x | Propeller MEJLIK 20x13 N-3 Blades |
1 x | 17x10 BIELA propeller (3-blades) |
1 x | 25 mm Sandpaper file |
2 x | Wheel collar 3 mm Ø (4 uds) |
2 x | XT-60 Plug Mold |
1 x | Adapter 2,3 mm M5 for spinner 30 mm fixed propeller |
1 x | Combustible Glow "KAVAN" air/heli 5% nitro |
1 x | White 2,4 GHz antenna exit guides (2 pcs) |
2 x | Piloto Jet "Red" 1/6 Scale |
1 x | Civilian pilot "Joe" size 9cm (Slimline) |
2 x | 1/6 Pilot "Cindy" |
1 x | Militarian pilot "Fly Boy" size 9cm (Slimline) |
2 x | 1/6 Pilot "John" |
1 x | 1/12 Pilot "Fighter" |
2 x | Pilot "Anthony" (Slimline) |
1 x | Titanium M3x0,5x6 mm Flat Head screw (4 pcs) |
1 x | Threaded insert M6 (10 pcs) |
1 x | Propeller APC 8x4 Glow/Gas |
1 x | Propeller APC 16x8 Glow/Gas |
1 x | Propeller APC 11x5 Glow/Gas |
1 x | Threaded insert M4 (4 pcs) |
1 x | Propeller APC 11x7 Glow/Gas |
1 x | Titanium M3x0,5x12 mm Flat Head screw (4 pcs) |
1 x | Socket Head Screw M2x12 |
1 x | Propeller APC 9x6 Glow/Gas |
1 x | FALCON 20X9 CARBON PROPELLER (GAS) |
1 x | Threaded insert M3 (4 pcs) |
1 x | Propeller G-Sonic 20x8 |
1 x | Tapping Screw M2.9x9.5 (10 pcs) |
1 x | Propeller APC 15x6 Glow/Gas |
1 x | BALSA trip 5.0x5.0x1000 mm |
1 x | FOAM - CURE™ (24g) |
1 x | A/C quality beech plywood 600x300x5.0 mm |
1 x | BALSA leading edge 8x10x1000 mm |
1 x | BALSA triangular 10x10x1000 mm |
1 x | Balsa panel 8.0x100x1000 mm |
1 x | Beech dowels 10 mm x 1000 mm |
1 x | BALSA trip 8.0x8.0x1000 mm |
1 x | Receiver GRAUPNER GR-12 HoTT |
1 x | BALSA trip 4.0x4.0x1000 mm |
1 x | Carbon tube (L 1000 mm, Ø2 mm, Ø1 mm) |
1 x | A/C quality beech plywood 600x300x1.5 mm |
1 x | DUPLEX 2.4EX RC Switch |
1 x | DUPLEX MRMP Hall EX |
1 x | DUPLEX 2,4GHz MRPM-AC EX |
1 x | DUPLEX USB Adapter |
1 x | DUPLEX 2.4EX MT 125 temperature sensor |
1 x | DUPLEX 2.4EX Expander E4 |
1 x | DUPLEX TGs 2,4 GHz (transmitter module) |
1 x | DUPLEX 2.4EX MUI 150 Sensor |
1 x | DUPLEX 2.4EX MAlti (Rev.2) |
1 x | DUPLEX 2.4GHz GPS |
1 x | DUPLEX 2.4EX RC Power Switch 10 |
1 x | DUPLEX 2,4GHz MRPM EX |
1 x | DUPLEX 2.4EX MSpeed PITOT <300 Km/h |
1 x | DUPLEX 2.4EX MU 3 Sensor |
1 x | DUPLEX 2.4 EX MBar |
1 x | MT 125 temperature sensor |
1 x | Duplex 2.4 EX TopFuel MTAG Battery Reader |
1 x | DUPLEX 2.4EX Expander E2 |
1 x | DUPLEX 2.4EX MUI 75 |
1 x | Civilian pilot "Gramps" size 9cm (Slimline) |
1 x | Carbon tube (L 1000 mm, Ø6 mm, Ø4 mm) |
1 x | 1/7 Pilot "Japanese" |
1 x | Piloto jet 130 mm |
1 x | Heli blades angle measurer |
1 x | MPX plug mold V1 |
2 x | Vinyl Gloves IDEAL LIGHT, size M , box/ 100 pcs |
1 x | Mold plugs XT-30 |
1 x | Precision wrench L100 mm |
1 x | Sub-D Plug Mold |
1 x | Set brocas Ø 2.0-2.2-2.4-2.6 mm (4 pcs) |
2 x | Roller cutter 28 mm |
1 x | Tube bender |
1 x | Mini-handed clamp |
1 x | Silicone black 0,5 qmm wire ( 1 m) |
2 x | Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm) |
1 x | Sealing Iron Sleeve PROF |
1 x | Tool for entel |
1 x | Mini Infrared Thermomiter |
1 x | ABS tube 5.0x4.0x156 mm |
1 x | Soldering tip for KAVAN soldering iron KAV66.8338 |
1 x | ABS Strip 1.0x5.0x1000 mm |
1 x | Sealing Iron Profi LCD |
1 x | F1 Prop Cap Can (Fuel Container Conection) |
1 x | PROXXON - TRIANGLE / DELTA SANDING MACHINE OZI/E |
2 x | PROXXON - SAW BLADE OZI/E, 65MM, 160 TOOTH |
1 x | Steel tube (L 1000 mm Ø7 mm, Ø6,7 mm) |
1 x | 22x10 prop Super Silence |
1 x | Steel brush wheel with 2.35mm |
1 x | Schul-Malpinsel Gr.5 |
1 x | Steel tube (L 1000 mm Ø10 mm, Ø9,7 mm) |
1 x | Rubber Insert hard, 1 Pcs. |
1 x | 18x10 BIELA propeller |
1 x | 20x10 BIELA propeller (3-blades) |
1 x | FIALA Propeller 25x10 |
1 x | FIALA Propeller 18x8 |
1 x | 24x14 prop Super Silence |
1 x | Spare round blades, 28 mm, pack/ 2 pcs. |
1 x | 3-blades 20x12 carbon prop Super Silence |
1 x | Aluminun wheel collar 6 mm Ø (4 uds) |
1 x | 3-blades 16x10 carbon prop Super Silence |
1 x | 3-blades 28x12 carbon prop Super Silence |
1 x | Propeller MEJLIK 16x11 3 Blades |
1 x | Cut tube |
1 x | ABS tube 6.0x5.0x1000 mm |
1 x | Steel tube (L 1000 mm Ø6 mm, Ø5,7 mm) |
1 x | Propeller MEJLIK 24x10 TH |
1 x | 24x10 4Bl Scale |
1 x | Dean-T Plug Mold |
1 x | 17x10 BIELA propeller SCALE (3-blades) |
1 x | PROXXON - SAW BLADE HSS (50MM - 100T) (28020) |
1 x | |
1 x | Screwdriver for Torx® TX6 |
1 x | 18x8 BIELA propeller |
1 x | Steel tube (L 1000 mm Ø4 mm, Ø3,7 mm) |
1 x | Propeller VESS 32A |
1 x | 26x12D BIELA 3Bl propeller (3-blades) |
1 x | 22x12 BIELA propeller (3-blades) |
1 x | 3-blades 30x12 carbon prop Super Silence |
1 x | FIALA Propeller 23x8 |
1 x | Adapter 5,0 mm M6 for spinner 40 mm fixed propeller |
1 x | Tool for entel |
1 x | Balsa panel 1.0x100x1000 mm |
1 x | Wooden mouth spatulas (150 x 18 x 1.5 mm), 100 pcs |
1 x | Adapter 3,0 mm M5 for spinner 30 mm fixed propeller |
1 x | Adapter 3,0 mm M6 for spinner 40 mm fixed propeller |
1 x | Welder 100W/200V |
|
22,298.06EUR |