1 x | Brass rod Ø 0.5 mm x 1000 mm |
1 x | Straightened rod Ø 8.0 mm x 1000 mm |
1 x | Straightened rod Ø 0.5 mm x 1000 mm |
2 x | Aluminium rod Ø 4.0 mm x 3000 mm |
1 x | Straightened rod Ø 7.0 mm x 1000 mm |
2 x | Straightened rod Ø 5.0 mm x 1000 mm |
2 x | Straightened rod Ø 1.0 mm x 1000 mm |
1 x | Straightened rod Ø 1.5 mm x 1000 mm |
1 x | Brass rod Ø 0.8 mm x 1000 mm |
1 x | Straightened rod Ø 1.5 mm x 1500 mm |
1 x | Straightened rod Ø 2.0 mm x 1000 mm |
1 x | Straightened rod Ø 3.0 mm x 1000 mm |
2 x | Straightened rod Ø 6.0 mm x 1000 mm |
1 x | Straightened rod Ø 4.5 mm x 1000 mm |
1 x | Brass hexagonal rod Ø 5 mm x 1000 mm |
4 x | |
2 x | 2000A 12V Lithium Jump Starter with 150PSI Air inflator |
2 x | Servo NARO Max Std |
2 x | BALSA leading edge 8x10x1000 mm |
1 x | A/C quality beech plywood BIRCH 600x300x1.0 mm |
1 x | Balsa panel 6.0x100x1000 mm |
2 x | A/C quality beech plywood 600x300x0.6 mm |
2 x | BALSA triangular 8x8x1000 mm |
1 x | BALSA triangular 15x15x1000 mm |
1 x | Balsa panel 5.0x100x1000 mm |
1 x | Balsa panel 10x100x1000 mm |
2 x | BALSA trip 2.0x10.0x1000 mm |
2 x | BALSA trip 6.0x6.0x1000 mm |
1 x | BALSA triangular 6x6x1000 mm |
1 x | Beech dowels 10 mm x 1000 mm |
1 x | A/C quality beech plywood 1520x750x4.0 mm |
1 x | A/C economy plywood 600x300x6+.0 mm |
1 x | A/C quality beech plywood 600x300x0.8 mm |
2 x | A/C quality beech plywood 600x300x1.5 mm |
2 x | Xplorer2 anemometro |
2 x | BALSA trip 3.0x3.0x1000 mm |
1 x | Balsa panel 2.5x100x1000 mm |
1 x | A/C quality beech plywood 600x300x0.8 mm |
2 x | A/C quality beech plywood 1520x750x3.0 mm |
1 x | Xplorer3 anemometro |
2 x | BALSA trip 5.0x5.0x1000 mm |
2 x | BALSA trip 8.0x8.0x1000 mm |
2 x | BALSA trip 3.0x5.0x1000 mm |
1 x | BALSA trip 2.0x2.0x1000 mm |
2 x | Xplorer4 anemometro |
1 x | Couple M4 for wire (10 pcs) |
1 x | Aluminium red ball links M3 V1 (10 pcs) |
1 x | 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs) |
1 x | 100m servo "Premium" wire (white/red/blue) |
1 x | Duralumium F3A horn 30x10x23,5 mm (2 pcs) |
1 x | 1/6 Pilot "Tony" |
1 x | Straightened threaded rod M3 - 1m |
1 x | Straightened rod Ø 14.0 mm x 1000 mm |
1 x | Brass hexagonal rod Ø 3 mm x 1000 mm |
2 x | Straightened rod Ø 5.5 mm x 1000 mm |
2 x | Straightened rod Ø 4.0 mm x 1000 mm |
1 x | Straightened rod Ø 2.5 mm x 1000 mm |
1 x | Brass rod Ø 1.5 mm x 1000 mm |
1 x | Tube support Ø 6mm (10 pcs) |
2 x | Soporte grifo FESTO (2 pcs) |
1 x | Aro pasacable Ø20 mm (4 pcs) |
2 x | Support XT60 conector (2 pcs) |
1 x | Support FUEL DOT V3 |
1 x | Balsa panel 3.0x100x1000 mm |
1 x | Straightened rod Ø 0.8 mm x 1000 mm |
1 x | Pine wood slat 3.0x5.0x1000 mm |
1 x | NF-1 RC set |
2 x | Pine wood slat 3.0x7.0x1000 mm |
2 x | Beech dowels 3.0 x 1000 mm |
2 x | Linden wood slat 3.0x3.0x1000 mm |
1 x | Jet Afterburner Simulator NF-Jet3 RYS |
1 x | NF-3X-80 liner Kit |
2 x | Jet Afterburner Simulator NF-Jet2 |
1 x | Cap closure 33/23.5mm (2 uds) |
1 x | Steering arm 12 mm Ø 3 mm (2 uds) |
1 x | SUS wire 3m (nylon coated) |
1 x | Covered closure or fairings |
1 x | Locking cable tie 2.5x100 (uds) |
1 x | Piloto RC Civil 1/5- 1/6 Scale 12" |
1 x | Pine wood slat 1.5x3.0x1000 mm |
1 x | BALSA triangular 10x10x1000 mm |
2 x | Mahogany wood slat 3.0x3.0x1000 mm |
1 x | Pine wood slat 2.0x10.0x1000 mm |
2 x | Liston HAYA 8 x 8 x 1000 mm |
2 x | Xplorer1 anemometro |
1 x | BALSA trip 4.0x4.0x1000 mm |
1 x | Walnut wood slat 1.5x1.5x1000 mm |
1 x | Mahogany wood slat 1.5x1.5x1000 mm |
1 x | Pine wood slat 5.0x5.0x1000 mm |
1 x | Pine wood slat 10x10x1000 mm |
1 x | 1/4 Pilot "Mike" |
1 x | Pilot "Adolf" Legends Series (Slimline) |
1 x | Pilot "Anthony" (Slimline) |
1 x | Support Antena 2.4 Ghz (2 pcs) |
1 x | Soporte grifo FESTO vertical (1 pcs) |
1 x | Tapa estado carga XT-60 (6 pcs) |
1 x | Soporte filtro FESTO (4 pcs) |
1 x | Support ECU Xicoy X-45 |
1 x | Support pumb/filter Xicoy X45 |
1 x | Support Pitot JETI |
1 x | Motor A20-20 L EVO |
1 x | Shaft for A60-L (140mm) |
1 x | Balsa panel 1.5x100x1000 mm |
1 x | 3 LiPo XH>EH adapter |
1 x | Silicone 0,25 qmm servos wire Graupner (100 m) |
1 x | Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH |
1 x | White silicone 0,25 qmm wire (150 m) |
1 x | Cabel "Y" 30 cm (graupner) |
1 x | Silicone red 0,25 mm² wire (25 m) |
1 x | Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH |
1 x | 1/4 Pilot "Heidi" |
1 x | PBY 6/6A Catalina, Observer´s dome (L + R) |
1 x | Pushrod octagone 3/2 |
1 x | Stainless steel cable Ø 0.5 mm (10 m) |
1 x | Micro screw-lock pushrod conn snap Ø 1 mm (2 uds) |
1 x | Fully Threaded Steel Rod M2,0 (2 uds) 250mm |
1 x | Pushrod octagone 4/3 with coupler M3 |
1 x | Fully Threaded Steel Rod M3 |
1 x | Pushrod greyline 3/2 with coupler M2 |
1 x | Landing gear frontal support 25x32x16 |
1 x | M2-250 mm Carbon Fiber Adjustable Push Rod Sets (2 pcs) |
1 x | Cap Hispano Aviación |
1 x | Birch plywood plate 600x300x1.2 mm |
1 x | Axle for AXI 2212/xx motors |
1 x | Motor A20-6 XL 10-Pole EVO + 4,4:1 |
1 x | Motor B20-18 L + 4:1 gearbox |
1 x | Axle for motor A50-L |
1 x | Motor A30-12 L V4 |
1 x | Radial Mount Set for AXI2814 and AXI2820 V2 |
1 x | Birch plywood plate 600x300x4.0 mm |
1 x | A/C quality beech plywood 600x300x5.0 mm |
1 x | SUPER STRANGTH SERVO ARMS FUTABA LONG (8 PCS) |
1 x | NF-2 RC set |
1 x | Silicone 0,25 qmm servos wire Graupner (5 m) |
1 x | Silicone 0,14 qmm servos wire Graupner (100 m) |
1 x | PVC 0,35 qmm servos wire Graupner (100 m) |
1 x | Red copper lacquer wire Ø0,2 mm (5 m) |
1 x | Black copper lacquer wire Ø0,2 mm (5 m) |
1 x | PVC 0,08 qmm Futaba servos wire (5 m) |
1 x | Silicone 0,14 qmm servos wire Graupner (5 m) |
1 x | PVC 0,08 qmm Graupner servos wire (5 m) |
1 x | 3 copper lacquer wire Ø0,2 mm (1 m) |
1 x | 2 LiPo XH>EH adapter |
1 x | Canadair CL-415 (aero-naut) |
1 x | Fully Threaded Steel Rod M2,5 (2 uds) |
1 x | Pushrod greyline 3/2 with coupler M2 L: 1000 mm |
1 x | Pushrod octagone 3/2 with coupler M2 |
1 x | Screw-lock connector Ø 2 mm (2 uds) |
1 x | Fully Threaded Steel Rod SUS303 65 mm M3 (2 pcs) |
1 x | One touch canopy lock |
1 x | Screw-lock pushrod conn snap Ø 1.5 mm (2 uds) |
1 x | Softshell Hispano Aviación |
1 x | Vest clothes Hispano Aviación |
1 x | Shirt Hispano Aviación |
1 x | Balsa panel 4.0x100x1000 mm |
1 x | quality beech plywood BIRCH 600x300x2.0 mm |
1 x | Jet Afterburner Simulator NF-Jet2YY Set |
1 x | DPSI Micro - RCS RV |
1 x | ESC ALPHA 60A HV |
1 x | Battery EMCOTEC LiIon 3000 7.2v |
1 x | Birch plywood plate 600x300x2.0 mm |
1 x | Jet Afterburner Simulator NF-Jet1RY Set |
1 x | Propeller APC 10x4.7 |
1 x | Propeller APC 12x6 Electric Pusher |
1 x | Propeller APC 11x3.8 SF |
1 x | Propeller APC 10x7 SF |
1 x | Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm) |
1 x | Propeller APC 10x5 Electric Pusher |
1 x | Propeller APC 11x7 SF |
1 x | Propeller APC 13x10 Electric |
1 x | Propeller APC 11x10 Electric |
1 x | Propeller APC 11x8 Electric |
1 x | Actuador lineal HLS12-100210-7.4v |
1 x | Straightened rod Ø 1.2 mm x 1500 mm |
1 x | Propeller APC 11x4.5 Electric Pusher |
1 x | Propeller APC 10x6 Electric Pusher |
1 x | Propeller APC 12x8 Electric |
1 x | Propeller APC 14x12 Electric |
1 x | Propeller APC 12x6 SF |
1 x | Propeller APC 10x5.5 MR Electric multirrotor |
1 x | Propeller APC 13x4 Electric |
1 x | Propeller APC 10x5.5 MR Electric multirrotor PUSHER |
1 x | Propeller APC 13x6.5 Electric Pusher |
1 x | Propeller APC 10x4.7 SF Pusher |
1 x | Propeller APC 10x7 Electric |
1 x | Propeller APC 12x10 Electric |
1 x | Propeller APC 11x8.5 Electric |
|
5,341.03EUR |