2 x | SIMtransmitter 6 Mode 2 |
1 x | Liston HAYA 10 x 10 x 1000 mm |
1 x | BALSA triangular 10x10x1000 mm |
1 x | Liston HAYA 8 x 8 x 1000 mm |
1 x | Mahogany wood slat 1.5x1.5x1000 mm |
2 x | BALSA trip 5.0x5.0x1000 mm |
2 x | Pine wood slat 3.0x10.0x1000 mm |
1 x | Beech dowels 2.0 x 1000 mm |
1 x | Mahogany wood slat 2.0x2.0x1000 mm |
1 x | BALSA triangular 6x6x1000 mm |
1 x | Pine wood slat 3.0x7.0x1000 mm |
1 x | BALSA trip 4.0x4.0x1000 mm |
1 x | BALSA trip 3.0x5.0x1000 mm |
1 x | BALSA trip 8.0x8.0x1000 mm |
2 x | BALSA trip 6.0x6.0x1000 mm |
3 x | Interface Realflight Simulator |
2 x | EasyFLY Addon |
3 x | Simulador RealFlight RF-9.5 S (sin emisora) |
1 x | RF9 Flight Simulator with Spektrum Controller |
1 x | Slave-cable USB Easy Sim |
3 x | Ventus 1:4 set of instruments |
1 x | Carbon Non-Woven, 160 g/m² 127 cm 5m |
1 x | Vacuum bag, 1200 mm x 50 m |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs) |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m |
1 x | Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds) |
1 x | Connectors banna oro 8,0 mm (M/F) |
1 x | Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm) |
1 x | Red smoke canister 100 g |
2 x | Pine wood slat 10x10x1000 mm |
1 x | Trailing edge BALSA 35x8x1000 mm |
1 x | Pine wood slat 2.0x2.0x1000 mm |
1 x | Pine wood slat 5.0x5.0x1000 mm |
1 x | Beech dowels 4.0 x 1000 mm |
1 x | Beech dowels 10 mm x 1000 mm |
2 x | BALSA trip 2.0x2.0x1000 mm |
1 x | BALSA triangular 15x15x1000 mm |
2 x | Mini neumatic retract landing gear |
1 x | Balsa panel 5.0x100x1000 mm |
1 x | Balsa panel 2.0x100x1000 mm |
1 x | Retract undercarriage for gliders 3-7 Kg 3.8-4.3 (without wheel) |
1 x | Birch plywood plate 600x300x2.0 mm |
1 x | Soporte filtro FESTO (4 pcs) |
1 x | BALSA leading edge 8x10x1000 mm |
1 x | Balsa panel 2.5x100x1000 mm |
1 x | Balsa panel 6.0x100x1000 mm |
1 x | quality beech plywood BIRCH 600x300x2.0 mm |
1 x | Retract undercarriage for gliders up to 2 Kg |
1 x | A/C quality beech plywood 600x300x0.6 mm |
1 x | Quick hose connector 4-4 mm |
1 x | 5 mm Prop Adapter M8 |
1 x | Axle wheel with accesories |
1 x | DPSI LR-S (with push buttons) |
1 x | 3.2 mm Prop Adapter M6 |
1 x | Filter Capacitor JR |
1 x | 6 mm Prop Adapter M8 |
1 x | FEMA DEFLECTOR LEVER FOR WHEEL BRAKE, |
1 x | Glider retract undercarriage 8-16 Kg 2.5-3.2(127 mm wheel) |
1 x | Optotronix X-Carrier |
1 x | Fail Safe air retract |
1 x | T-Hose connector 3-3-3 mm |
1 x | Quick hose connector 3-3 mm |
1 x | T-Hose connector 4-4-4mm |
1 x | 3.2 mm Prop Adapter M8 |
1 x | Body for landing gear Ø 4 mm |
1 x | 2 mm Prop Adapter M6 |
1 x | OPTOTRONIX Aurora LCU |
1 x | Wheel cover holder Ø 4 mm (2 uds) |
1 x | 3.17 mm Prop Adapter CN-Spinner |
1 x | Tap FESTO 6-6 mm |
1 x | Z-shaped servo mount |
1 x | DUPLEX 2.4EX Central Box 210 |
2 x | DUPLEX 2.4EX Central Box 220 |
1 x | 10 mm Prop Adapter M12 |
2 x | Servo arm with 6 mm hole to FEMA 9800A |
1 x | Prop Shaft Adapter 4 mm/M8 "long" 35 mm |
1 x | Brazo servo MKS X8 Metal L:1.25/1.5 inc |
2 x | Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm |
1 x | Aluminum Bayonet / strongal D35 mm / 1 m |
1 x | Propeller diller for DA50, DLE55 red |
1 x | 50 mm servo arm with bearing (2 pcs) |
1 x | 46 mm Futaba servo arm tandem with ball link |
1 x | HITEC 17 mm servo arm with ball link HITEC |
1 x | Servo KST BLS915 HV V8.0 25Kg 20mm 78g |
1 x | SERVO DES 568 MG |
1 x | Servo SAVOX SV-1260 MG |
1 x | 3,9 mm ZG20-ZG38 servo arm |
1 x | 89 mm double servo arm with bearing (2 pcs) |
2 x | Savox Brushless Servo SB-2271SG |
1 x | 7 Servo SET 9g DS MG + Full servo extension cable set for Avanti |
1 x | Servo SAVOX SB-2290 SG |
1 x | Gear for D 200 BX |
1 x | Servo Robbe FS 128 BB MG HV Digital |
1 x | Servo MKS HV6130 |
2 x | Aluminum Bayonet / strongal D12 mm / 0.5 m |
1 x | Aluminum Bayonet / strongal D25 mm / 1 m |
2 x | Servo KST X10 V2.0 ala 10mm 28g 10.8Kg |
1 x | SERVO DES 707 BB MG, Pignons |
1 x | Servo safety connector (10 pcs) |
1 x | Servo TOPMODEL STANDARD S3217 |
1 x | Hitec 25 mm servo arm with M3 ball link |
1 x | Servo SAVOX SV-1270 TG |
1 x | Suction funnel for carburetor DA70- MVVW 190cc (red) |
1 x | Hitec 25 mm servo arm with ball link |
1 x | Servo SAVOX SA-128S SG |
1 x | Sparkplug Saito 400 |
1 x | Servo KST X20-7512 V8.0 82kg 8.4v |
1 x | Futaba 2x20 mm servo double arm |
1 x | Sparkplug DLE CM6 |
1 x | Servo KST X15-1208 V8.0 13.5Kg HV |
1 x | DA 85 / DA 100 / DA 100 L carburetor |
1 x | Hose clips 6 mm |
1 x | Sparkplug Champion RCJ-7Y for ZG |
1 x | Savox HV Brushless Servo SB-2270SG (Swashplate) |
1 x | Servo arms set 40/50/55/5055 MG |
1 x | MIG 29 3D RTF, Servo |
1 x | Servo SAVOX SV-1261 MG |
2 x | Servo MKS 6100 DS |
1 x | 40 mm servo arm with bearing (2 pcs) |
1 x | Servo TT ACE SHV 1504 MG |
2 x | Servo TOPMODEL DS1413 T |
1 x | 2 mm Prop Adapter M5 |
1 x | Futaba 17 mm servo arm with ball link HITEC |
2 x | 90x75 mm standart servo cover |
2 x | Futaba 25 mm servo arm with M3 ball link |
1 x | Hitec 20 mm servo arm |
1 x | Soporte servo KST X10 mini / DS135MG |
1 x | Spark motor OS nº 8 |
1 x | DLA 116 crankshaft |
1 x | Servo KST X06H - 1.8Kg.cm 7mm 6g |
1 x | SERVO DES 588 BB MG |
1 x | Red aluminium servo arm V1-Futaba 1,5" inch M3 |
1 x | Blue aluminium servo arm V2-Hitec 1,25 inch M3 |
1 x | Gold aluminium servo arm V2-JR 1,0" inch M3 |
1 x | Servo FUTABA BLS172 SV |
1 x | Servo FUTABA BLS 272SV |
1 x | Futaba S3010 Servo - Standard BB 0.16s/6.5kg |
1 x | Gold aluminium servo arm V2-JR 1,5" inch M3 |
1 x | Flap hinge (6 pcs) |
1 x | Birch plywood plate 600x300x1.2 mm |
1 x | Canopy Latch |
1 x | Flap hinge 33x9 mm (6 pcs) |
1 x | Decorative caps, multicoloured, short |
1 x | Mini Infrared Thermomiter |
1 x | Foam plastic plates (310x210x2 mm) |
1 x | Receiver replacement antenna, approx. 15 |
1 x | Aluminium sheet 500x250x0,5mm |
1 x | L-shaped servo mount |
1 x | Landing gear clamp for Ø 4 mm (4 uds) |
1 x | DPSI Micro - DualBat 5.9V / 7.2V JR-JR (Dual Power Supply) |
1 x | Aluminium tube with fibreglass case ø35x1.5mm, 1m |
1 x | Propadapter for motor A60-V2 |
1 x | 17 mm servo arm with ball link DES Graupner |
1 x | Dubro Fuel Tank Cap/Fittings 2-24oz Tanks Gas |
1 x | Aluminium wide washer M3 blue (4 pcs) |
1 x | Aluminium ignition bad (red) |
1 x | Aluminium wide washer M4 Red (4 pcs) |
1 x | Propeller MENZ-S 19x8 3-Blades |
1 x | Servo KST X08 Plus 9g HV servo |
1 x | Servo SAVOX SA-1258 TG |
1 x | Kit hydraulic brake |
1 x | DPS Switch JR/JR |
1 x | Landing gear clamp for Ø 3 mm (4 uds) |
1 x | Servo-V-Limiter 5.2V |
1 x | Nylon threaded block M6 (2 uds) |
1 x | DPSI OCP Overload protection |
1 x | DUPLEX 2.4EX Central Box 220 + 2x Rsat2 + RC Switch |
1 x | Futaba 38 mm servo arm |
1 x | Servo MKS HV 777A+ |
1 x | Ball Bearings for motor A60-V2 |
1 x | Hitec 30 mm servo rounded arm |
1 x | MZ-10, 5 Channel HoTT |
1 x | Propeller APC 9x6 Glow/Gas |
1 x | Propeller APC 16x6 Glow/Gas |
1 x | FIALA Propeller 27x10 |
1 x | Servos security connector (2 pcs) |
1 x | SAVOX SH 1250 MG servo digi |
1 x | Alu-Cross for Backmount of A60-V2-Backmountmotors |
1 x | FIALA Propeller 23x10 |
1 x | 12x6 tree blades propeller |
1 x | FIALA Propeller 24x8 |
1 x | SAITO FG-36 carburetor |
1 x | Servo TOPMODEL S7520 MG |
1 x | Servo GO-12S70MG 20.5kg.cm 0.06s/60º |
1 x | Propeller MENZ-S 21x8 3-Blades |
1 x | OS 40-FG 4T Motor |
1 x | Servo MKS HBL599 SL |
1 x | Aluminium battery holder red |
1 x | 18 mm wing servo holder |
1 x | Propeller diller for DLE111 and DA85-150 |
1 x | Propeller POWER-PROP 11x9 |
1 x | Antenna Hole Cap V1 (Silver) |
1 x | Propeller MENZ-S 16x8 |
1 x | 10 mm Quick clamp_L (6 pcs) |
1 x | Propeller MENZ-S 17x10 |
1 x | Aluminium cap bolt washer M3 black (8 pcs) |
1 x | Brazo servo MKS Metal M3-L:30 (2 pcs) |
1 x | Motor OS FS 95 AX |
1 x | Reed valve for DA 50-R |
1 x | 13 mm wing servo holder |
1 x | 15 mm floating pad (30 pcs) |
1 x | Propeller MENZ-S 15x12 |
1 x | Aluminium wide washer M4 Gold (4 pcs) |
1 x | Servo KST A08H V6.0 3,2Kg HV |
1 x | Propeller MASTER 5,5x4,5 |
1 x | Servoarm SH-81, two sides, aluminium |
2 x | Propeller 3x2 |
1 x | Combo KAVAN PRO 3536-1000 + RAY 40 SB |
1 x | Propeller FIALA 15x8 3-Blade |
1 x | Propeller 9x7 SlowFlyer |
1 x | Program card KAVAN PRO |
1 x | FIALA Propeller 19x12 Electric |
1 x | Motor KAVAN PRO 2225-1600 |
1 x | Propeller 3x3 |
1 x | Combo KAVAN PRO 3542-1150 + KAVAN PRO-80 SB |
1 x | Propeller 9x4,7 SlowFlyer |
|
10,952.08EUR |